More info re "Time Limited Offer for Photographers", please

I'm considering this PS/Lightroom package at £8.78/month.
(1) If I start with the free 30-day trials and decide to stop, will I immediately be able to use the Elements 10 PS/Premiere/Organiser I have without any problems - e.g. no need to re-install?
(2) If I go ahead, what are the costs after the initial 12 months?
(And why does Adobe not have any info on this on the offer page and why do they have no direct Contact route, rather than going through a User Forum?)
Thanks in advance.

Sorry, I forgot to respond about the pricing.
My experience is that I ordered the Photographers Plan a little over a year ago, close to when it first became available, for $10/month (US) and the price remained the same to start the second year of subscription a couple months ago.
So my opinion is that the first year at $10/month isn't some sort of special price that doubles back up to the regular single-app price of $20/month (US) after the first year expires.
No business can promise their price will never go up for an indefinite period of time, but right now they want to keep their Cloud-Subscriptions graph going up and up so are unlikely to raise it, especially precipitously. If Adobe did say something specific about their pricing before actually increasing their price, stock analysts could draw positive or negative conclusions about either the current or future health of the company, so Adobe chooses to be vague on this subject.

Similar Messages

Create time-limited license for my application

Hi,
I have created an application for my client, but i would like to add in a function below into my software for license renew.
For example, after the application is used in a PC for one year, it will be locked and will ask user to renew the license, to activate the application again.
Is there anyway can create the time-limited license for my application?
My application is developed by LV 8.5.1.
I am appreciated for your feedback.
Thanks.

The Third Party Licensing & Activation Toolkit will do what you want, but you need LabVIEW 2010 or later.
There was even a NI-Week presentation: NIWeek Session: Creating a Software Evaluation for your Product in 10 minutes
Still, I agree with Norbert that an expiring licens is a very dumb idea. What if you go out of business? What if you are on vacation while their license expires? What is the system is on a space flight to Mars?
I would never install software that expires, because if it cannot be guaranteed that it will run a year from now I might as well not use it at all. If NI would do the same, your LabVIEW 8.5 would have stopped working long ago.
If you want to ensure that users upgrade to a new version, make sure to add new and exciting features. Offer service subscriptions, etc.
LabVIEW Champion . Do more with less code and in less time .

Is possible to execute the same executable vi more than 1 time (like notepad, for example)?

I have a Labview executable file that use serial ports to communicate with other devices. I need to execute the same "file.exe" more than 1 time, to control different devices simultaneously. When I double click on an executable been executed (from windows explorer), the file under execution comes to front. Is possible to execute the same file more than 1 time (like notepad, for example)?

Not the answer you are looking for I know..but still: Copying the application to another location is one possibility...if it has a different path it will execute separately.
(OR - build control of multiple devices into one and the same application... If you do not want to redesign the code to handle multiple instruments in the same VIs, you could clone the VIs within the same application...)
MTO

My word files are all corrupted- when i open 'get info' under "More info" they all have 'Photos for Personal Use or Home Display" and Authors: technology

My Word files are corrupted. When I open 'Get Info' then 'More Info' I find 'Photos for Personal Use or Home Display' and 'Authors' : Technology. - Nothing to do with the file I'd just written. My most recent files can't be saved or opened.
Is this Malware or some other kind of attack? I grabbed photos yesterday from what seem to be freely available pictures online. I discovered Firevault and Firewall were both turned off. (I hadn't checked before.) Any suggestions?

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

"Get Info" only displaying "more info" 1 time

Strange problem here.
When I select a file in the finder, and hit cmd-i to "get info" it displays as expected. The "More Info:" section is complete. If it's an image, it gives dimensions and color space etc. If its a pdf, I get page count, title, creator etc. Everything works just fine.
If I then close the info window, then later (or immediately) return, "More Info:" displays only two hyphens: -- . This happens on every file. First viewing of get info works fine. Close it, open again, and I only get -- in the More Info section.
Any suggestions on what might be causing this?

Projectionist wrote:
but I did import my preferences from the iMac when I first got it, so something must have copied over in that process.
Yes, precisely.
I tried to edit before you saw the .pist because I misread that it also didn't work in the test account. The issue is systemwide and requires a systemwide approach. I wish I could pinpoint it more. I realize how nagging these issues can be as I frequently use the Get Info command and frequently close and re-open it.
EDIT: Can you shutdown, disconnect the Drobo and try?

Time limits for upgrades?

I was just wondering if there are time limits/expirations for phone upgrades? I'm eligible for an upgrade on the 27th but want to wait maybe for a whole another year.

Same thing happened to me! I was previously eligible for an upgrade 9/13. Now it's stating I'm not eligible until 1/14. Seriously? I had read somewhere that they were extending the contracts to 24 months for those that have an expiration date after January 2014 but I was eligible in Sept! Shouldn't those that already had contracts in force be grandfathered anyway? We did sign contracts. God forbid WE change something in the contract. I didn't receive anything personally saying they were going to do this. Seems they're going in the wrong direction as far as contracts are concerned. Others are doing away with contracts. Very upset!

Parental Controls Time Limits Problem

I've set the time limits parameters for my two kids so they don't spend all their time on the computer (they watch the TV instead ... sigh.
One of them is fine and says they can log in at 07:00 (not teenagers just yet), but the other says they can log in at 00:00 even though the settings are the same in Parental Controls.
A coupe of days ago, it was the other way around. I repaired permissions and rebooted which seemed to work then, but it hasn't done this time.
My iMac time is correct. Anyone got any ideas?

Are you referring to the situation where all the time has been used up for a particular day? It will say user cannot login until midnight, which is I think the way it refers to cannot login until tomorrow, and the correct login time will appear once it is tomorrow.
This is how it behaves on both of mine.

Misleading and Restrictive Product Information Provided, for inducing customer to buy – by Apple Premium reseller - Unicorn Info Solutions Private Limited

Facts of the Case
IPHONE 3GS – Serial QRxxxxxY7H
We have visited the apple premium reseller M/s Unicorn Info Solutions Private Limited, Himalaya Mall, Ahmedabad, hereinafter called as “reseller”. On 10th August 2012, the sales representative at the store informed us that since we have an old apple phone, we were offered a scheme whereby against payment of Rs. 10000/- a new apple 3GS phone was to be provided against return of the old phone.
We have an MTNL Sim and on our return to Mumbai, we were surprised to find that the product showed No Service. We visited the I store in Mumbai, Ghatkopar, R – City Mall and were asked to contact the apple care. Accordingly we contacted the apple care and we were assigned case id xxxxxxx, whereby we were informed to contact Vodafone.
On contacting the Vodafone gallery at Ghatkopar, Mumbai, we were asked to wait for two days. After 2 days Vodafone informed us to contact the apple care only.
Upon again contacting apple care we were asked to contact the apple reseller M/s Unicorn who has sold the product.
M/s Unicorn, Ahmedabad, directed us to contact support office in Mumbai, Andheri where the issue would be resolved. We visited the Andheri office, but we told that nothing could be done, and neither the product could be returned back, even if it is no use to us and was sold by adopting misleading and fraudulent information.
Grievance
At no point we were informed that this phone will work with only Vodafone. The important legal principle of caveat emptor (let the buyer beware) was obviously absent and not followed by the reseller.
Moreover, the payment was made for an Apple phone and there was no mention of Vodafone, or of any agreement of whatsoever nature with the said company.
Firstly, to sell a product (Iphone) with a restrictive covenant to use complimentary product (Vodafone) without the knowledge of the buyer and in the absence of any legal contract, is a “Restrictive trade practice” under the Competition Act and erstwhile MRTP Act.
Secondly, the irresponsible attitude adopted by the reseller (M/s Unicorn) who sold the product, (M/s Apple Inc) the manufacturer and M/s Vodafone, which has put restriction on the product use without any valid contract is not at all appreciated. More so they have made us to run from pillar to post without even the product being able to start its usage.
<Edited By Host>

Posting a review on Unicorn Infosolutions Pvt Ltd, Third Floor, Himalaya Mall, Gurukul Road, Near Drive In Cinema, Ahmedabad, Gujarat - India
Person whom I spoke to - Ritesh Chauhan (I think, not sure of this first name)
My Macbook pro battery has given up, its time for replacement.
I happened to visit this store a few days ago, store is not the IMAGINE Retail store at Ground floor instead on the opposite side wing its on third floor, and a small board outside called Unicorn.
The executive whom I spoke with turned out to be really rude. Didn't understand my concern and went on forcing his views on me.
Although my laptop was still under warranty and having spoken to Apple Technical Support, I already gave him the information on phone prior to my visit, things were just not alright even then.
He was just way to busy explaining me how he does things and what are the procedures and so on, very bad behaviour, no care towards their customers and because we are customers who are not going to pay them anything as our products are still under warranty, they are really not interested in us, we are more like a liability on them (at least that's what I felt from my visit).
Refrain from going there guys, look out for an alternative Apple Authorised Service Centre. My positive experience was with the one at Galaxy Mall, Nehru Nagar, Near Shiromani Complex.
Their office is located at second floor in that mall, the person whom I met with was very humble and actually cared for me queries to get them resolved in a manner that would be best for me.

Time limits for time capsule access

I want to set time limits for individual devices on my Time Capsule network. How do I set this up??

You will need a hardware address for each wireless device that you want to be able to control. If you do not have the device listed, it will have "default" access to the wireless network, which means that it will have unlimited access at all times.
If you are having difficulty finding a hardware address for a given device, turn off all the wireless devices that will connect to the network except your Mac. You know the hardware address of your Mac already, correct?
Turn on one other wireless device and look for the info about that device. Then turn on the next device to get info about that device. You may not see a device name and instead see something like 10.0.1.x for the device name. Click on the 10.0.1.x display to reveal more information about the device, including the hardware address.
You can set up rules for each device on either the Time Capsule or the AirPort Extreme and the settings will automatically be transferred to the "other" device, so you only have to enter the rules on one device.
Open Airport Utility again and click on the Time Capsule if that is your "main" base station or router. Otherwise click on the AirPort Extreme if that is the main base station.
Click Edit
Click the Network tab at the top of the window
Look toward the bottom of the next window and make sure that there is a check mark next to Enable Access Control. Later, you will need to make sure that the other router you have is also enabled.
Click on Timed Access Control
Here you will see the "default' rule for the network of Unlimited Access. This means that any device that has not been assigned a specific rule will be able to connect to the network at any time. Leave this rule alone.
Click on the + (plus) button at the bottom of the Wireless Clients box
Type in a device name next to Description.....example.....iPad
Type in the hardware address of the device next to MAC Address
You probably want to have the rule in effect Everyday, so leave that box the same. If you click on the box, you will see that you are able to have the rule in effect with a number of other options.
Click on the All Day box and change that to Between
Double click on each time display to edit the start time and end time for the device each day. For example, the device might be able to connect Everyday, Between 9 AM and 10 PM. It is possible to have multiple rules for the same device by clicking the + button in this area to add another time slot.
Click Save
Click Timed Access Control again and repeat the process for the next device, etc until entries for all wireless devices that you want to control are complete
Click Update to save all of the settings and the Time Capsule will restart in 30 seconds.
Be sure to enter a check mark on the other router that you have to Enable Timed Access and Update to save the setting. This will transfer the stored settings from the Time Capsule to the AirPort Extreme or vice versa.
Good luck.

"more info" in Get Info showing "--" instead of actual infos for newer videos and images

I've just noticed that when I click on "Get Info" on my newer pictures and videos, the "more info" section is now showing "--" instead of the dimensions of the images and videos. However when I go to my older files, the info is showing. Also if I search any of the newer files (those with the missing info) in Spotlight, it doesn't show up. I've done some research and some people suggest reindexing Spotlight, but that never worked for me. In fact, even if I exclude a folder in my Privacy list, it's still showing as a result when I search them. I'm sure this is a problem with Spotlight as it stores the dimensions info, but since reindexing it is not a solution, can it be solved in some other way?

It takes time on newer things, but might have to be opened first or something.
If you want, you can clear the caches with OnyX (#12) and that would rebuild and repair the entire sub-system.
..Step by Step to fix your Mac
Mac maintainence steps

How to record a time-limited video with Adobe AIR for iOS

I am trying to record a time-limited video with Adobe AIR for iOS.
For example, I want to implement the following function. Start a one-minute timer before launching CameraUI to record video. When the timeout event happens after one minute, stop recording video, close the CameraUI view and obtain the video data so far.
I have several questions related to that.
1. How to stop recording video from outside the CameraUI view(in this case, from the timeout event handler) and then close the CemeraUI view? As far as I know, to close the CameraUI view, the only way is to press the [Use Video] button or the [Cancel] button from inside the CameraUI view. Is it possible to close it from outside?
2. Even if the first problem mentioned above is solved, then how can I get the video data so far(in this case, the video data before the timeout). I know that normally we can get a MediaPromise object from MediaEvent parameter of the complete handler, and read the video data from the MediaPromise object. But obviously in this case, we can not access the MediaPromise object just because the complete handler itself will not be executed since the [Use Video] button is not pressed.
3. Is it possible to add a stopwatch to show possible remaining recording time when CameraUI view is open? It seems that the CameraUI automatically uses the full screen of iOS device(in my case, iPad) and there is no extra space to show the stopwatch.
Are there any solutions or workarounds about the three problem above? I really appreciate it if anyone has any idea about this. Thanks in advance.

You'd have more control by using the Camera object, showing the camera on a video object inside a Sprite, and capturing that. Then you could put whatever graphics alongside it on the stage.. I've used FlashyWrappers in a test to capture the video to the library. It took some work, but the test worked well...
Flash/AIR record videos of your apps and games: Rainbow Creatures

I just bought a docking station for my iPad so I could plug into a mixing board and record a live show. I was disappointed at the time limitation for the recordings. What is the maximum amount you can record a song into GB for the iPad?

I purchased a docking station for my iPad so that I could record a live recording of my band directly from a mixing board this weekend using GarageBand. Unfortunately, I was unaware of the song length limitations of the iPad version of this program. Basically, was unable to capture more than 15 minutes of the gig. I've read other conversations on this forum and can't really determine the maximum amount of time this application can record. Can anyone tell me how long GarageBand for ipad can record at one single time and how to adjust the settings to achieve this? Also, is anyone aware of any other apps than could be used to record a longer please share. Thanks.
CP

I received an email reply from George, the Founder and CEO of Studiomini, he indicated to me that their app does not have any time limitations in regards to recording like GB does, you are only limited by the amount of free space on your iPad. Fo what it's worth, I think the Alesis IO Dock is an amazing piece of equipment. I would highly recommend purchasing the IO Dock and plugging your mixing board into the dock to capture your rehearsal. Hopefully the feedback I received from Studiomini is accurate and I can capture my entire rehearsal at one time. I hope this feedback helps. One last note, apparently their will be a update soon to view Studiomni in the landscape view on the iPad instead of just the portrait view.

Every time I right-click an image in Firefox 3.6.12 to view image size info it says "Unknown (not cached)". Any ideas on why this could be happening and how I can stop it? My OS is Ubuntu 10.10. If you need any more info let me know.

Every time I right-click an image in Firefox 3.6.12 to view image size info it says "Unknown (not cached)". Any ideas on why this could be happening and how I can stop it? My OS is Ubuntu 10.10. If you need any more info let me know.

Is the disk cache and the memory cache enabled?
You can check these prefs on the about:config page.
* http://kb.mozillazine.org/browser.cache.disk.enable
* http://kb.mozillazine.org/browser.cache.memory.enable
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
Your More system details list shows two outdated Flash plugins that you should remove and update to Flash 10.1 r102 or at least remove 10.0 r45 and wait until your distribution offers a 10.1 r102 update.
# Shockwave Flash 10.0 r45
# Shockwave Flash 10.1 r85
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

I have contacted apple for more than 5 times, but no reply

Hi , i have renewed my iphone developer program for 99$ , But i used to get the message that "my account is expired please renew it" , later now my apps too disappeared in appstore.I have contacted apple support for more than 5 times, but no reply.What is happening.Can some one please explain please.

"Apple will fix all these problems during a week."
Or not.
There are many devs who still have NO access to ANY part of the developer website.
Apple is aware of this (a dev support person telephoned me last week) but, so far, there is no fix or work-around.
It may be true that the developer site has access for SOME subscribers; it is NOT true that everyone is able to get resources shown as "online" on the status page -- many of us have ZERO access.
So, when Apple says 'this week' you have to balance that with the FACT that their assessment of the current status, ie. everyone has limited access now, is wrong/untruthful.
Anyone who doubts this should simply look at other posts in this forum -- lots of folks can't get into the site -- just an infinite loop from login to grey linen maintenance page and back.

ORA-00205: error in identifying controlfile, check alert log for more info

Hello All,
I am performing my first Collab Suite install in quite some time and I have successfully installed Collaboration Suite on Linux Red Hat AS 4. I first performed an infrastructure installation for the Collab Suite database which completed with no errors, however, it appears that no control files were created in my $ORACLE_HOME/dbs directory during installation. I am also unable to specify their exact location in the initSID.ora file as I am unable to find them in any other directory on my server. The database starts despite the control file error, as you can see from the second SQL*Plus prompt. However, I am unsure how to create the control files or correct this error. Any assistance would be greatly appreciated!
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Mar 21 09:51:49 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect SYS as SYSDBA
Enter password:
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 100663296 bytes
Fixed Size 778024 bytes
Variable Size 99623128 bytes
Database Buffers 0 bytes
Redo Buffers 262144 bytes
ORA-00205: error in identifying controlfile, check alert log for more info
======================================================================
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Mar 21 11:18:57 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect SYS as SYSDBA
Enter password:
Connected.
SQL> startup nomount
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
With the Partitioning, OLAP and Data Mining options

Control files are database-specific, since they contain information describing the database (location of data files, etc.) You can't copy them from one database to another.
Do you have a backup?

More info re "Time Limited Offer for Photographers", please

Similar Messages

Maybe you are looking for