More Infos on data transfer transactions (IL06, IL18, IL17)
Dear forumers,
Need to find out the documentation for the below Data transfer transactions:
IL06 - From Functional location
IL18 - From equipment
IL17 - Take up data transfer.
Trying to find out what it does but to no avail. Would appreciate if somebody could briefly explain:
1 what it does &
2 whether it's transferring data from ext file to SAP or vice versa.
Many thanks for any help given.
Rgds,
Zuaini
Hi,
...you're on the right path
With the BAPI_FTR_CREATEFROMDATA you can create new transactions.
In case you want to just mirror transactions to another CompCode, you can use the mirror-functionality (IMG: TM > General Settings > Transaction Management > Distribution of Mirror Transactions)
Regards,
Lorenz
Similar Messages
-
DTP (Data Transfer Process)
Hi, I would like to know more about DTP (Data Transfer Process), how can i use it to replace infosources, transfer rules and update rules in just one transformation.
I will be very grateful for your comments and your help...
Thanks and regards!hi,
You use the data transfer process (DTP) to transfer data within BI from a persistent object to another object in accordance with certain transformations and filters
It is like a replacement of the info packages in the olderr versions.
Data transfer processes are used for standard data transfer, for real-time data acquisition, and for accessing data directly.
youu can refer to this link for mor infos.
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
hope it helps.. -
Error 33172 occurred at Read & Write data transfer between two or more PF2010 controller
Hi,i need to do data transfer between two or more FP2010 controller.e.g. FP2010(A) & FP2010(B).
FP2010(A) need to transfer the measurement (from its I/O module) to FP2010(B) to do the data analysis.These data transfer should be synchronous btw two controller to prevent data lost.
From the vi used in the attachment,i encountered some problems at:
(1) Error 33172 occurred while publishing the data.Can i create and publish data under different item name?
(2) How to synchronies the read & write btw contorller?
All controller are communicating with each other directly without the need of a host computer to link them together
Is there any other method to do fast data transfer betwe
en controller?Hi YongNei,
You were succesful in omiting enough information to make it very difficult to answer!
Please post your example.
Please tell us what version of LV-RT you are using.
Please define what you concider "fast data transfer".
Have you concidered mapping the FP tags of FP2010(A) to FP2010(B) and vise versa?
WHat exactly has to be syncronized?
If you have something that is close to working, share that.
Well, that as far as I can go with the info you have provided. Depending on the details, what you are asking could be anything from trivial to impossible with the currently available technology. I just can't say.
It would probably be a good idea to start over with a fresh question (sorry) because not many people are going to know what a a "
PF2010" is and I can not guarentee that I will be able to get back to you personally until next week-end.
Trying to help you get an answer,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Info cube key figure quantity is more than the data source
Hi,
I am loading data from a custom table data source into an info cube. The data records and key figure quantity of the info cube is more than the data source custom table.
I checked the extraction in RSA3. The number of records records and key figure quantity are exactly extracted from the data source in RSA3 transaction.
But after loading using the info package, the number of records and the key figure quantity of the info cube is more than the actual records available in the data source. The update rule is simple 1 to 1 mapping.
Kindly help to troubleshoot this issue.
thanks and regards
MurugesanHi,
There could be some other data already avilable in the Infocube. Pls take the Request ID or Number from the last run of the Infopackage you used and check the records only for that Request ID in Infocube.
You can check the data in the LISTCUBE Transaction.
Please let me know of you need additional information.
Thanks,
Jeysraj -
Data transfer into partition table took more time
Scenario: We have a Staging table (consider it as Table A) which is refreshed Every month. Every month table A is truncated and inserted with 6 million records approx. Once the mandatory update done on Table A we have to move the records to main table (Table
B). Table B is Partitioned by month wise, which contains the complete history of records from the year 2010. Table B has 1 clus. index(month column) and 3 non clustered index. Currently table B has 180,562,235 records. While transfer i didn’t disable the index,
because it was taking more time for enabling the index again.
Question: Data transfer from table A to table B took 2.30 hours approx. Is there any way to reduce transfer time.
Any Suggestion to reduce the time will be helpful.Try with SWITCH Partition...
eg:
http://www.mssqltips.com/sqlservertip/1406/switching-data-in-and-out-of-a-sql-server-2005-data-partition/ -
I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.
Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Data transfer processes and info packages in new client
Hi,
We have created new client from the development client.
The Info cubes and update rules are available in new client, bu the data transfer processes and info packages are not moved to the new client.
What is the actual sequence of steps to be followed when new client created from development client. Have I missed some sequence or steps. What are the sequence of steps to be followed when created a new client.
Kindly suggest to resolve this issue.
thanks and regards
MurugesanHi,
I have never seen clients created on the BI system. As such all the objects in the BI system are client independent as well as the data stored in the tables does not have the mandt field. Hence you cannot distinguish different clients in the BI system. Also if you notice all the request in BI are workbench request and not customizing requests.
I do not think this is a viable solution. Maybe you can contact SAP.
http://help.sap.com/saphelp_nw70/helpdata/en/b7/8a9a3aaf894871e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/a9/bb963a570b4b5de10000000a114084/frameset.htm
Regards,
Vikram -
Hi,
I had a hard drive failure on my old PC and I couldn't retrieve anything. I have purchased a new PC and downloaded itunes (Version I'm not use to which isn't helping) and signed in however it only has my purchased songs on the cloud which I need to download into my library from cloud. However I have thousands of songs that I imported into my old library from CD's etc which is no lost apart from all the data held on my ipod.
So my Ipod is more up-to-date then my library now. When I look to sync my ipod it says everything will be removed and will be replaced with content from the library. I've had a look around and I can't see a way to get my music from my ipod to my library.
Is there anything I can do, please help?
ThanksSee:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
or
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities -
Any info about EDT (External Data transfer)
Hi,
I am working in insurance module of SAP. There is a business object called Business Partner which we need to migrate from legacy to R/3.
Now for migration of Business partner generally LSMW is not used. People here use EDT (External data transfer).
Does some one know about EDT as data transfer tools ?
Regards,
Rajesh.Hi Rajesh,
Please check this EDT online document.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CADATA/CADATA.pdf
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful. -
Error in KEFC transaction - External Data Transfer
I am getting this error while using external data transfer function using KEFC.
Plan version is not supported -> check your entry
Message no. KG 029
Diagnosis
Plan version"xx" has not been created in operating concern"xxxx"
Procedure
Transfer version"xx" to operating concern"xxxx" and maintain the attributes for that version.
I have checked plan version settings. It has been created for operating concern as well. I am not sure how to resolve this. Any suggestion or help would be appreciated.Hi AP,
Please check whether you defined a constant value for characteristic VERSI (Version) in the transfer rules for your sender structure. If you don't want to define a constant value there you have to assign a field from your external structure and fill the version in your external file. In this case please consider to fill the field in the following format '1 ' for version 1 (don't use '001').
Please refer and implement note 576807 in your system if it is in your system . Also refer note 508273 for a possible list of problems in external data transfer.
Best Regards,
Abhisek -
Data transfer limits -- Confusing info
When I click on the page on dot mac that tells me how much data transfer I have used, I see two numbers.
For instance, one line says:
You are currently using 260.1 MB of 5 GB bimonthly data transfer limit.
Then below, it lists the date I opened my dot mac account (two days ago), and says, "Amount used: 1.94 GB"
I can't figure out which number I should be keeping an eye on? I don't want to exceed my 5 GB bi-weekly limit.
Can anyone explain? Thanks, in advance.The "data transfer" is how much bandwidth (from your limits) has been used for the bimonthly period.
The 260.1MB number is the one to watch. To increase your monthly bandwidth limit from the standard 10GB's you need to purchase additional storage space.
Doubling the default (1GB to 2GB) for about $50 a year moves your data transfer amount from 10 to 25GB's. -
Data S Default data transfer Options
Hi
What do the below mentioned terms mean in infopackage-Schedular--Data S Default data transfer
1Max size of datapakcet in kbytes
2Max no of dailogues process for sending data
3No of data packet per info idoc
Please help me with an example and what importance it has when we increase/ decrease the lengh of the above 3 mentioned do we have any interconnection in all three or they are all independent.
Thanks
PuneetHello Puneet,
These are some standard BW Settings done in transaction SPRO.
SPRO ->SAP Customizing Implementation Guide->SAP NetWeaver->SAP Business Information Warehouse->Links to Other Systems->Maintain Control Parameters for the data transfer
Maximum size of a data packet in kilo bytes.
The individual records are sent in packages of varying sizes in the data transfer to the Business Information Warehouse. Using these parameters you determine the maximum size of such a package and therefore how much of the main memory may be used for the creation of the data package.
SAP recommends a data package size between 10 and 50 MB.
Frequency with which status Idocs are sent
With this frequency you establish how many data IDocs should be sent in an Info IDoc.
Maintain Control Parameters for the data transfer
Standard settings
For SAP source systems, you change the control parameter settings in the transaction SBIW (Customizing for Extractors), under Business Information Warehouse -> General Settings -> Control Parameters -> Maintain Control Parameters for Data Transfer .
Activities
1. Maximum size of data packages
For data transfer into BW, the individual data records are sent in packages of variable size. You use these parameters to control how large such a data package typically is. If no entry is maintained, the data is transferred with a standard setting of 10,000 kbytes per data package. The memory requirement depends not only on the setting for data package size, but also on the width of the transfer structure, and the memory requirement of the relevant extractor.
2. Frequency
With the specified frequency, you detemine after how many data IDocs an Info IDoc is sent, or how many data IDocs are described by an Info IDoc.
The frequency is set to 1 by default. This means that an Info IDoc follows every data IDoc. Generally, choose a frequency of between 5 and 10, but not greater than 20.
The larger the package size of a data IDoc, the lower you must set the frequency. In this way you ensure that, when loading data, you receive information on the current data load status at relatively short intervals.
In the BW Monitor you can use each Info IDoc to see whether the loading process is running without errors. If this is the case for all the data IDocs in an Info IDoc, then the traffic light in the Monitor is green. One of the things the Info IDocs contain information on, is whether the current data IDocs have been loaded correctly.
3. Size of a PSA partition
Here, you can set the number of records at which a new partition is generated. This value is set to 1.000.000 records as standard.
When you are integrating with Other SAP Components then
SPRO ->SAP Customizing Implementation Guide->Integration with Other SAP Components->Data Transfer to the SAP Business Information Warehouse->General Settings->Maintain Control Parameters for the data transfer
Maintain Control Parameters for Data Transfer
Activities
1. Source System
Enter the logical system of your source client and assign the control parameters you selected to it.
You can find further information on the source client in the source system by choosing the path Tools -> Administration -> Management -> Client Maintenance.
2. Maximum Size of the Data Package
When you transfer data into BW, the individual data records are sent in packages of variable size. You can use these parameters to control how large a typical data packet like this is.
If no entry was maintained then the data is transferred with a default setting of 10,000 kBytes per data packet. The memory requirement not only depends on the settings of the data package, but also on the size of the transfer structure and the memory requirement of the relevant extractor.
3. Maximum Number of Rows in a Data Package
With large data packages, the memory requirement mainly depends on the number of data recrods that are transferred with this package. Using this parameter you control the maximum number of data records that the data package should contain.
By default a maximum of 100,000 records are transferred per data package.
The maximum main memory requiremen per data package is approximately 2'Max. Rows'1000 Byte.
4. Frequency
The specified frequency determines the number of IDocs that an Info IDoc is to be sent to, or how many data IDocs an Info Idoc describes.
Frequency 1 is set by default.. This means that an Info Idoc follows every data Idoc. In general, you should select a frequency between 5 and 10 but no higher than 20.
The bigger the data IDoc packet, the lower the frequency setting should be. In this way, when you upload you can obtain information on the respective data loading in relatively short spans of time .
With the help of every Info IDoc, you can check the BW monitor to see if there are any errors in the loading process. If there are none, then the traffic light in the monitor will be green. The Info IDocs contain information such as whether the respective data IDocs were uploaded correctly.
5. Maximum number of parallel processes for the data transfer
An entry in this field is only relevant from release 3.1I onwards.
Enter a number larger than 0. The maximum number of parallel processes is set by default at 2. The ideal parameter selection depends on the configuration of the application server, which you use for transferring data.
6. Background job target system
Enter the name of the application server on which the extraction job is to be processed.
To determine the name of the application server, choose Tools -> Administration -> Monitor -> System monitoring -> Server. The name of the application server is displayed in the column Computer.
7. Maximum Number of Data Packages in a Delta Request
With this parameter, you can restrict the number of data packages in a delta request or in the repetition of a delta request.
Only use this restriction when you expect delta requests with a very high data volume, so that, despite sufficiently large data package sizes, more than 1000 data packages can result in a request.
With an initial value or when the value is 0, there is no restriction. Only a value larger than 0 leads to a restriction in the number of data packages. For reasons of consistency, this number is not generally exactly adhered to. The actual restriction can, depending on how much the data is compressed in the qRFC queue , deviate from the given limit by up to 100.
Thanks
Chandran -
We run a small network in our office consisting mainly of Intel iMacs we purchased several months ago. The server computer is a brand new Intel Mac Pro server with 4 500 gig drives raided together, two 2.66GHz dual core intel processors, all the other bells and whistles we could think of, etc. We added in two fiber-optic switches: one in the server room, one in the office. The switches connect to each other and the server with fiber optic cables, but the iMacs connect with ethernet cables.
We had the iMacs for a while but we just recently got the new server and upgraded our old 100 base switches. Afterwards we wanted to test out the data transfer speeds, as we plan to back up to the server frequently. We were dismayed to find that transfer rates capped out at 60 MegaBytes/sec according to the Activity Monitor's Network Activity tab. In fact, it would range mostly from 40-45MB/sec. None of us here have much experience with networking, but that seemed a tad too slow. My basic math tells me that a byte is 8 bits, and from that a Gigabit network should transfer data at 120 MegaBytes/sec, which is three times the speeds we were actually seeing.
We sent data both to and from the server in order to test this. Thinking it was perhaps a problem with the ethernet itself, we grabbed an external FireWire hard drive and transferred data from one of the iMacs directly to it and noticed exactly the same transfer rates. We plugged two iMacs directly into each other and transferred at the same rate, ~45MB/sec.
Well this was highly frustrating. All Macs supposedly ship with Gigabit ethernet since, what, 2002? Earlier? Why are our speeds so slow? We thought the hard drives might be slow, so we got info on the drives and googled them for their tech specs. The iMacs' Western Digital drives are capable of much much faster speeds according to everything we've read.
We started reading anything we could online that addressed this issue. Some information read the problem might be that the optical DVD-R/CD-R drive was only capable of slower transfer speeds. Since the optical drive and the hard drive are on the same bus it would slow down the hard drive's maximum transfer rate, much like having a Gigabit hub with a 10 base computer plugged into it would slow the entire network down (which is of course why we use switches instead of hubs). Is there any truth to this? If this is, in fact, the case, can we bypass this bottleneck somehow? I'm not talking about opening the computer and manually disabling the optical drive, as that's a waste of a perfectly good DVD-R/CD-R drive.
Also, if this is true, why in blue blazes is Apple flaunting Gigabit ethernet if the computer can only take advantage of 1/3 the speeds Gigabit ethernet has to offer?! I'll happily provide any more information that's relevant to the problem at hand.
Thank you
Mac OS X (10.4.8)Here's the specs for the default Hard Drive that Apple put in here:
http://www.westerndigital.com/en/products/Products.asp?DriveID=137
From that page
Buffer To Host (Serial ATA) 300 MB/s (Max)
Buffer To Disk 748 Mbits/s (Max)
I have no idea what signaling overhead for my data transfer protocol means.
The ethernet cords are no longer than 20 feet, are all Cat5E, and are well shielded. There is little to no ElectroMagnetic interference in any area they run. The longest cable is the Fiber Optic one, which runs about... oh... 40 yards? These were all installed by professionals.
I feel it's important to stress the fact that we tested an isolated direct computer to computer transfer with a single 6 foot Cat5E Ethernet cable and still experienced the same speeds that we experienced over the network. We tested multiple computers, multiple cables, multiple files. -
Data transfer from sap r/3 into excel sheet for mi01
hi gurus,
as i am a xi consultant i got requirement to write a program for data transfer from sap r/3 into excel sheet for MI01.can any body help me by giving sample code or example for this requirement.please help me.Hi Rohit,
This is an upload program and it has used both function modules to upload from an excel to R3 and to download from R3 onto excel.
GUI_UPLOAD
GUI_DOWNLOAD
are the function modules used.
Hope this helps,
*Output: Downloads error records onto presentation server,
* Displays report with number of success and error records
REPORT ZMCG047CONTR NO STANDARD PAGE HEADING
LINE-SIZE 255
MESSAGE-ID ZM.
*& Table declarations
TABLES : T001W, "Plants/Branches
T024E, "Purchasing Organizations
T001. "Company Codes
* TYPE-POOLS DECLARATION
TYPE-POOLS : SLIS.
* Types Declaration *
TYPES: BEGIN OF T_RECORD, "record storing contract info
LIFNR(010), "Vendor Number
EVART(004), "Agreement Type
EKORG(004), "Purchasing Organization
EKGRP(003), "Purchasing Group
WERKS(004), "Plant
LGORT(004), "Storage Location
KDATB(010), "Valid start Date
KDATE(010), "Valid End Date
ZTERM(004), "Payment Terms
KTWRT(020), "Target Value
EPSTP(001), "Item Category
EMATN(018), "Material Number
KTMNG(017), "Target Quantity
NETPR(014), "Net Price
PEINH(006), "Net Price Unit
BPRME(003), "Net Price Order Price Unit
IDNLF(035), "Vendor Material number
WEBRE(001), "GR Based-IV
MEPRF(001), "Pricing Date Category
LTEX1(040), "Info Text
DATAB(010), "Valid From
DATBI(010), "Valid To
KSCHL(004), "Condition Type
KBETR(016), "Condition Rate if scale is not given
KONWA(005), "Currency
KPEIN(005), "Condition Pricing Unit
KMEIN(003), "Condition Unit of Measure
KSTBM(019), "Scale
KBETR_01(016), "Scale Rate
DEL_FLAG, "Delete Flag Indicator
ERR_MSG(100), "Error Message
END OF T_RECORD,
BEGIN OF T_ERR_RECORD, "to have error records stored
LIFNR(010), "Vendor Number
EVART(004), "Agreement Type
EKORG(004), "Purchasing Organization
EKGRP(003), "Purchasing Group
WERKS(004), "Plant
LGORT(004), "Storage Location
KDATB(010), "Valid start Date
KDATE(010), "Valid End Date
ZTERM(004), "Payment Terms
KTWRT(020), "Target Value
EPSTP(001), "Item Category
EMATN(018), "Material Number
KTMNG(017), "Target Quantity
NETPR(014), "Net Price
PEINH(006), "Net Price Unit
BPRME(003), "Net Price Order Price Unit
IDNLF(035), "Vendor Material number
WEBRE(001), "GR Based-IV
MEPRF(001), "Pricing Date Category
LTEX1(040), "Info Text
DATAB(010), "Valid From
DATBI(010), "Valid To
KSCHL(004), "Condition Type
KBETR(016), "Condition Rate if scale is not given
KONWA(005), "Currency
KPEIN(005), "Condition Pricing Unit
KMEIN(003), "Condition Unit of Measure
KSTBM(019), "Scale
KBETR_01(016), "Scale Rate
DEL_FLAG, "Delete Flag Indicator
ERR_MSG(100), "Error Message
END OF T_ERR_RECORD,
BEGIN OF T_LOEKZ, "To have deletion indicators for materials
LOEKZ(001), "Deletion indicator in purchasing document
EMATN(018), "Material Number
WERKS(004), "Plant
LGORT(004), "Storage Location
BSTYP(001), "Purchasing document category
END OF T_LOEKZ,
BEGIN OF T_MATNR, " Type definition to store details of materials
MATNR(018), "Material Number
END OF T_MATNR,
BEGIN OF T_T001, " Type definition for company codes
BUKRS(004), " Company Code
END OF T_T001,
BEGIN OF T_ZMVXREF, "Cross-Reference table type
D_ALTKN(10), "Legacy Vendor Number
D_BUKRS(4), "Legacy Company Code
M_ALTKN(10), "SAP Company Code
END OF T_ZMVXREF,
BEGIN OF T_LFA1, "Master data of vendors
LIFNR(10), "Vendor Number
END OF T_LFA1,
* Type Declaration for T024E (Company Codes)
BEGIN OF T_T024E,
EKORG LIKE T024E-EKORG, "Purchasing organization
BUKRS LIKE T024E-BUKRS, "Company Code
END OF T_T024E,
* Type Declaration for t001w (Plant)
BEGIN OF T_T001W,
WERKS LIKE T001W-WERKS, "Plant
END OF T_T001W,
* Type Declatation for String Line
BEGIN OF T_STR1, "#EC NEEDED
SLINE(6000) TYPE C,
END OF T_STR1.
TYPES: BEGIN OF T_BDCDATA. "BDC Data
INCLUDE STRUCTURE BDCDATA.
TYPES: END OF T_BDCDATA.
* Internal Tables Declaration *
DATA:
* Internal table to store input file data
I_RECORD TYPE STANDARD TABLE OF T_RECORD INITIAL SIZE 0,
* Internal table to capture errors
I_ERR_REC TYPE STANDARD TABLE OF T_ERR_RECORD INITIAL SIZE 0,
* Internal table to check for deletion indicators
I_LOEKZ TYPE STANDARD TABLE OF T_LOEKZ INITIAL SIZE 0,
* Internal table to check for material numbers
I_MATNR TYPE STANDARD TABLE OF T_MATNR INITIAL SIZE 0,
* Internal table used for storing Cross-Reference data of Vendor
I_ZMVXREF TYPE STANDARD TABLE OF T_ZMVXREF INITIAL SIZE 0,
* Internal table for holding Vendor Numbers from Master table
I_LFA1 TYPE STANDARD TABLE OF T_LFA1 INITIAL SIZE 0,
* Internal table for holding Purchase Org and Company Codes
I_T024E TYPE STANDARD TABLE OF T_T024E INITIAL SIZE 0,
* Internal table for holding Plants
I_T001W TYPE STANDARD TABLE OF T_T001W INITIAL SIZE 0,
* Internal table for storing a list of Company Codes
I_T001 TYPE STANDARD TABLE OF T_T001 INITIAL SIZE 0,
* Internal table used for ALV Reporting
I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
* Internal table used for holding List Header
I_LISTHEADER TYPE SLIS_T_LISTHEADER, "EC NEEDED
* Internal table to hold ALV Event
I_ALV_EVENT TYPE SLIS_T_EVENT,
* Internal table to hold Sort Info for ALV Report
I_SORT TYPE SLIS_T_SORTINFO_ALV,
* Internal table for BDC Data
I_BDCDATA TYPE STANDARD TABLE OF T_BDCDATA INITIAL SIZE 0,
* Internal table for messages
I_MESSTAB TYPE TABLE OF BDCMSGCOLL,
* Internal table for String line
I_STR1 TYPE STANDARD TABLE OF T_STR1 INITIAL SIZE 0.
* Work Area Declaration *
DATA:
* Work Area to hold data for the Open Contract
WA_RECORD TYPE T_RECORD,
* Work Area to hold previous record data
WA_RECORDPREV TYPE T_RECORD,
* Work Area to hold errors
WA_ERR_REC TYPE T_ERR_RECORD,
* Work Area to hold the Deletion Indicator of materials
WA_LOEKZ TYPE T_LOEKZ,
* Work Area to hold Material numbers of required materials
WA_MATNR TYPE T_MATNR, "EC NEEDED
* Work Area to hold errors occured while performing BDC
WA_MESSTAB TYPE BDCMSGCOLL,
* Work Area to hold field catalog for ALV Reports
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
* Work Area to hold list header data for ALV reports
WA_LISTHEADER TYPE SLIS_LISTHEADER,
* Work Area to hold ALV Event
WA_ALV_EVENT LIKE LINE OF I_ALV_EVENT, "EC NEEDED
* Work Area to hold Layout of ALV Report
WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
* Work Area to hold Cross-Reference data of Vendor
WA_ZMVXREF TYPE T_ZMVXREF,
* Work Area to hold Vendor Numbers from Master table
WA_LFA1 TYPE T_LFA1, "EC NEEDED
* Work Area to hold Purchase Org and Company Codes
WA_T024E TYPE T_T024E,
* Work Area to hold Company Codes
WA_T001 TYPE T_T001,
* Work Area to hold Plants
WA_T001W TYPE T_T001W,
* Work Area to hold Sort Info for ALV Report
WA_SORT TYPE SLIS_SORTINFO_ALV,
* Work Area to hold BDC Data
WA_BDCDATA TYPE T_BDCDATA,
* Work Area for String line
WA_STR1 TYPE T_STR1.
* Variables Declaration *
DATA: V_ERRMSG(500), "To temporarily store the error message
V_CONV_DATE(10) TYPE C, "To capture the converted date format
V_DATE LIKE SY-DATUM,
V_REPID LIKE SY-REPID, "holds report id
V_CROSS_REFERENCE_ERROR TYPE I, " cross-reference error
V_INPUTERROR_FLAG VALUE '', " input error status
V_FILENAME TYPE STRING, " File Name
VEN_FLAG(1), " at new status
MAT_FLAG(1), " at new status
V_IND(2) TYPE N, " index of table control
V_IND2(2) TYPE N, " index of table control
V_IND3(2) TYPE N, " index of table control
V_EVRTP1(20),
V_EPSTP1(20),
V_EMATN1(20),
V_KTMNG1(20),
V_NETPR1(20),
V_PEINH1(20),
V_BPRME1(20),
V_TCSELFLAG1(20),
V_KSCHL2(20),
V_KBETR2(20),
V_KONWA2(20),
V_KPEIN2(20),
V_KMEIN2(20),
V_SELKZ2(20),
V_KBETR3(20),
V_KSTBM3(20),
V_LINE TYPE I,
V_STR TYPE X VALUE '09',
V_EXIST TYPE C,
V_EXIST1 TYPE C,
V_ISDIR TYPE C,
V_ISDIR1 TYPE C.
* Constants Declaration *
CONSTANTS: C_TCODE(5) VALUE 'ME31K', "Trx code - Open Contract Creation
C_TRUE VALUE 'X', " Del_Flag indicator
C_LOEKZ_MARKED VALUE 'X', "Deletion indicator for material
C_INPUTERROR_FLAG_YES VALUE 'X', "Input File Indicator
C_VEN_ERR1 VALUE 1, "Error Indicator
C_16(2) VALUE '16',
C_VEN_ERR2 VALUE 2, "Error Indicator
C_VEN_ERR3 VALUE 3, "Error Indicator
C_VEN_SUCS VALUE 0, "Success Indicator
C_SUCCESS LIKE SY-SUBRC VALUE '0',
C_STRUE VALUE 'S', "Del_flag for SAP Errors
C_YTRUE VALUE 'Y', "Del_flag for Success Records
C_MSGTYP_E VALUE 'E', "holds error message type
C_MSGTYP_S VALUE 'S', "holds success message type
C_BSTYP VALUE 'K', "Purchasing Document type is Contract
C_BACKGROUND VALUE 'N', "Background mode
C_FOREGROUND VALUE 'A', "All Screen mode
C_ERRORS VALUE 'E', "Error screen mode
C_WK(2) VALUE 'WK'. "Value Contract
* Selection Screen *
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-033.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
* Plant
S_WERKS FOR T001W-WERKS OBLIGATORY,
* Purchase Organization
S_EKORG FOR T024E-EKORG OBLIGATORY.
* Company Code
PARAMETER P_BUKRS LIKE T001-BUKRS OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 3.
PARAMETER RB_SERVE RADIOBUTTON GROUP RBX DEFAULT 'X' USER-COMMAND U1.
SELECTION-SCREEN COMMENT 6(19) TEXT-036.
SELECTION-SCREEN POSITION 37.
PARAMETER RB_LOCAL RADIOBUTTON GROUP RBX.
SELECTION-SCREEN COMMENT 40(13) TEXT-035.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN SKIP.
PARAMETERS:
* Parameter holding Input File name
P_FILE LIKE RLGRAP-FILENAME
OBLIGATORY
LOWER CASE
DEFAULT 'C:\'
MODIF ID G1,
P_FILE1 LIKE RLGRAP-FILENAME
OBLIGATORY
LOWER CASE
DEFAULT '/celestica/interface/corp/in/work/'
MODIF ID G2,
* Parameter specifying Mode of calling the Transaction.
P_MODE DEFAULT 'N' OBLIGATORY,
* Check box used to test the input file.
P_TEST AS CHECKBOX DEFAULT 'X',
* Parameter holding Filename for holding Input File Errors
P_IPERR LIKE RLGRAP-FILENAME
OBLIGATORY
LOWER CASE
DEFAULT 'C:\'
MODIF ID G1,
P_IPERR1 LIKE RLGRAP-FILENAME
OBLIGATORY
LOWER CASE
DEFAULT '/celestica/interface/corp/in/work/047_Err.txt'
MODIF ID G2.
SELECTION-SCREEN END OF BLOCK B2.
* AT Selection Screen Events *
* Loop the screen to activate relative paths
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF RB_SERVE = C_TRUE AND SCREEN-GROUP1 = 'G1'.
SCREEN-OUTPUT = 0.
SCREEN-ACTIVE = 0.
SCREEN-INPUT = 0.
ELSEIF RB_LOCAL = C_TRUE AND SCREEN-GROUP1 = 'G2'.
SCREEN-OUTPUT = 0.
SCREEN-ACTIVE = 0.
SCREEN-INPUT = 0.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
AT SELECTION-SCREEN ON BLOCK B2.
* Checking Access Authorization for the user
CALL FUNCTION 'ZU_DATA_ACCESS_AUTH_CHECK'
EXPORTING
ACTVT = C_16
P_BUKRS = P_BUKRS
TABLES
S_WERKS = S_WERKS
S_EKORG = S_EKORG
EXCEPTIONS
BUKRS_FAILED = 1
VKORG_FAILED = 2
VTWEG_FAILED = 3
EKORG_FAILED = 4
WERKS_FAILED = 5
LGNUM_FAILED = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
AT SELECTION-SCREEN ON P_BUKRS.
IF NOT P_BUKRS IS INITIAL.
SELECT SINGLE BUKRS INTO T001
FROM T001
WHERE BUKRS EQ P_BUKRS.
IF SY-SUBRC NE 0.
MESSAGE I000 WITH TEXT-089.
STOP.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
* Search Help to select Input File path.
PERFORM GET_FILE_NAME USING P_FILE.
* Check for the existence of the file.
IF RB_LOCAL EQ C_TRUE.
CALL FUNCTION 'TMP_GUI_GET_FILE_EXIST'
EXPORTING
FNAME = P_FILE
IMPORTING
EXIST = V_EXIST
ISDIR = V_ISDIR
EXCEPTIONS
FILEINFO_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF V_ISDIR IS INITIAL.
IF V_EXIST IS INITIAL.
MESSAGE I000 WITH TEXT-018.
STOP.
ENDIF.
ELSEIF V_ISDIR EQ C_TRUE.
MESSAGE I000 WITH TEXT-068.
STOP.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_IPERR.
* Search Help to select Input Error File path.
PERFORM GET_FILE_NAME USING P_IPERR.
AT SELECTION-SCREEN.
* Validate Transaction Mode
IF P_MODE <> C_BACKGROUND AND
P_MODE <> C_FOREGROUND AND
P_MODE <> C_ERRORS.
MESSAGE I000 WITH TEXT-034.
STOP.
ENDIF.
START-OF-SELECTION.
* Get the Input File Data
V_FILENAME = P_FILE.
PERFORM UPLOAD_FLATFILE_DATA TABLES I_RECORD
USING V_FILENAME.
* Sorting the data by all fields
SORT I_RECORD.
* Ensuring the padding of the empty spaces before the vendor No
CLEAR WA_RECORD.
LOOP AT I_RECORD INTO WA_RECORD.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_RECORD-LIFNR
IMPORTING
OUTPUT = WA_RECORD-LIFNR.
MODIFY I_RECORD FROM WA_RECORD
INDEX SY-TABIX
TRANSPORTING LIFNR.
CLEAR WA_RECORD.
ENDLOOP.
* Input file validation
PERFORM VALIDATE_FLATFILE_DATA.
IF P_TEST = C_TRUE.
IF I_ERR_REC[] IS INITIAL.
MESSAGE I000 WITH TEXT-032.
STOP.
ELSE.
* Display all the error records at the input level.
PERFORM DISPLAY_INPERR_RECORDS.
* Download Error File
PERFORM DOWNLOAD_ERROR_FILE.
ENDIF.
ELSE.
* Build BDC Data
PERFORM BUILD_BDC_DATA.
* Download Error File
PERFORM DOWNLOAD_ERROR_FILE.
* Display the status report.
PERFORM DISPLAY_PROCESSED_RECORDS.
ENDIF.
END-OF-SELECTION.
REFRESH: I_RECORD,
I_ERR_REC,
I_LOEKZ,
I_MATNR,
I_ZMVXREF,
I_LFA1,
I_T024E,
I_FIELDCAT,
I_LISTHEADER,
I_ALV_EVENT,
I_SORT,
I_BDCDATA,
I_MESSTAB,
I_STR1.
FREE: I_RECORD,
I_ERR_REC,
I_LOEKZ,
I_MATNR,
I_ZMVXREF,
I_LFA1,
I_T024E,
I_FIELDCAT,
I_LISTHEADER,
I_ALV_EVENT,
I_SORT,
I_BDCDATA,
I_MESSTAB,
I_STR1.
*& Form GET_file_name
* Fetches the file and path from the presentation system
* --> p1 Path along with the file name
FORM GET_FILE_NAME USING L_FILE LIKE RLGRAP-FILENAME.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
MASK = ',*.TXT,*.txt.'
MODE = 'O'
TITLE = TEXT-011
IMPORTING
FILENAME = L_FILE
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5.
CASE SY-SUBRC.
WHEN 1.
MESSAGE I000 WITH TEXT-084.
STOP.
WHEN 2.
MESSAGE I000 WITH TEXT-085.
STOP.
WHEN 3.
MESSAGE I000 WITH TEXT-086.
STOP.
WHEN 4.
MESSAGE I000 WITH TEXT-087.
STOP.
ENDCASE.
ENDFORM. " GET_file_name
*& Form upload_flatfile_data
* Uploading data from Flat File
FORM UPLOAD_FLATFILE_DATA
TABLES I_L_RECORD STRUCTURE WA_RECORD
USING L_FILENAME TYPE STRING.
DATA WA_L_RECORD TYPE T_RECORD.
* Upload the Flat file data
IF RB_LOCAL EQ C_TRUE. "File is on the Local System
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = L_FILENAME
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = I_L_RECORD
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
CASE SY-SUBRC.
WHEN 0.
DESCRIBE TABLE I_L_RECORD LINES V_LINE.
IF V_LINE EQ 0.
MESSAGE I000 WITH TEXT-065.
STOP.
ENDIF.
WHEN 1.
MESSAGE I000 WITH TEXT-068.
STOP.
WHEN 2.
MESSAGE I000 WITH TEXT-069.
STOP.
WHEN 3.
MESSAGE I000 WITH TEXT-070.
STOP.
WHEN 4.
MESSAGE I000 WITH TEXT-071.
STOP.
WHEN 5.
MESSAGE I000 WITH TEXT-072.
STOP.
WHEN 6.
MESSAGE I000 WITH TEXT-073.
STOP.
WHEN 7.
MESSAGE I000 WITH TEXT-074.
STOP.
WHEN 8.
MESSAGE I000 WITH TEXT-075.
STOP.
WHEN 9.
MESSAGE I000 WITH TEXT-076.
STOP.
WHEN 10.
MESSAGE I000 WITH TEXT-077.
STOP.
WHEN 11.
MESSAGE I000 WITH TEXT-078.
STOP.
WHEN 12.
MESSAGE I000 WITH TEXT-079.
STOP.
WHEN 13.
MESSAGE I000 WITH TEXT-080.
STOP.
WHEN 14.
MESSAGE I000 WITH TEXT-081.
STOP.
WHEN 15.
MESSAGE I000 WITH TEXT-082.
STOP.
WHEN 16.
MESSAGE I000 WITH TEXT-083.
STOP.
ENDCASE.
CLEAR V_LINE.
ELSEIF RB_SERVE EQ C_TRUE. "File is on the Application Server
P_MODE = C_BACKGROUND.
OPEN DATASET P_FILE1 FOR INPUT IN TEXT MODE.
CHECK SY-SUBRC EQ C_SUCCESS.
CLEAR WA_STR1.
DO.
READ DATASET P_FILE1 INTO WA_STR1.
IF SY-SUBRC <> 0. " NE SUCCESS.
EXIT.
ELSEIF SY-SUBRC EQ C_SUCCESS.
APPEND WA_STR1 TO I_STR1.
CLEAR WA_STR1.
ENDIF. " ENDIF on SY-SUBRC 0 Check.
ENDDO. " ENDDO
DELETE I_STR1 WHERE SLINE EQ ' '.
DESCRIBE TABLE I_STR1 LINES V_LINE.
IF V_LINE EQ 0.
MESSAGE S000 WITH TEXT-065.
STOP.
ENDIF.
LOOP AT I_STR1 INTO WA_STR1.
CLEAR: WA_L_RECORD.
SPLIT WA_STR1-SLINE AT V_STR
INTO WA_L_RECORD-LIFNR
WA_L_RECORD-EVART
WA_L_RECORD-EKORG
WA_L_RECORD-EKGRP
WA_L_RECORD-WERKS
WA_L_RECORD-LGORT
WA_L_RECORD-KDATB
WA_L_RECORD-KDATE
WA_L_RECORD-ZTERM
WA_L_RECORD-KTWRT
WA_L_RECORD-EPSTP
WA_L_RECORD-EMATN
WA_L_RECORD-KTMNG
WA_L_RECORD-NETPR
WA_L_RECORD-PEINH
WA_L_RECORD-BPRME
WA_L_RECORD-IDNLF
WA_L_RECORD-WEBRE
WA_L_RECORD-MEPRF
WA_L_RECORD-LTEX1
WA_L_RECORD-DATAB
WA_L_RECORD-DATBI
WA_L_RECORD-KSCHL
WA_L_RECORD-KBETR
WA_L_RECORD-KONWA
WA_L_RECORD-KPEIN
WA_L_RECORD-KMEIN
WA_L_RECORD-KSTBM
WA_L_RECORD-KBETR_01
WA_L_RECORD-DEL_FLAG
WA_L_RECORD-ERR_MSG.
APPEND WA_L_RECORD TO I_L_RECORD.
CLEAR: WA_L_RECORD,
WA_STR1.
ENDLOOP.
REFRESH I_STR1.
CLOSE DATASET P_FILE1.
ENDIF.
ENDFORM.
*& Form BDC_DYNPRO
* Data populated into i_bdcdata table for program
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR WA_BDCDATA.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO = DYNPRO.
WA_BDCDATA-DYNBEGIN = C_TRUE.
APPEND WA_BDCDATA TO I_BDCDATA.
ENDFORM.
*& Form BDC_FIELD
* Data populated into i_bdcdata table for fields
FORM BDC_FIELD USING FNAM FVAL.
CLEAR WA_BDCDATA.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO I_BDCDATA.
ENDFORM.
*& Form convert_date
* Converting the data from the file format to mm/dd/yyyy format
* <--P_wa_record_kdatb Source Date
* <--p_l_conv_date Target Date
FORM CONVERT_DATE USING L_DATE
L_TAR_DATE.
CONCATENATE L_DATE+0(2)
L_DATE+3(2)
L_DATE+6(4)
INTO L_TAR_DATE.
ENDFORM. " convert_date
*& Form validate_flatfile_data
* Validating the input file
FORM VALIDATE_FLATFILE_DATA.
DATA: L_TODAY LIKE SY-DATUM,
L_STARTDATE_C LIKE SY-DATUM,
L_ENDDATE_C LIKE SY-DATUM,
L_ENDDATE_C1 LIKE SY-DATUM,
L_STARTDATE_C1 LIKE SY-DATUM,
L_STARTDATE(8),
L_ENDDATE(8).
* Fetch indicator for all records on the material, plant & storage
* location combination.
IF NOT I_RECORD[] IS INITIAL.
REFRESH I_LOEKZ.
SELECT EMATN " Material Number
WERKS " Plant
LGORT " Storage Location
BSTYP " Purchasing Document Category
LOEKZ " Deletion indicator
INTO TABLE I_LOEKZ
FROM EKPO
FOR ALL ENTRIES IN I_RECORD
WHERE EMATN = I_RECORD-EMATN
AND WERKS = I_RECORD-WERKS
AND LGORT = I_RECORD-LGORT
AND BSTYP = C_BSTYP
AND LOEKZ = C_LOEKZ_MARKED.
IF SY-SUBRC EQ 0.
SORT I_LOEKZ BY EMATN WERKS LGORT BSTYP LOEKZ.
ENDIF.
* Fetching Plants for all entries in the selection screen
REFRESH I_T001W.
SELECT WERKS "Plant
INTO TABLE I_T001W
FROM T001W
WHERE WERKS IN S_WERKS.
IF SY-SUBRC EQ 0.
SORT I_T001W BY WERKS.
ENDIF.
* Fetching materials for the plants listed in flat file
REFRESH I_MATNR.
SELECT MATNR " Material Number
INTO TABLE I_MATNR
FROM MARC
FOR ALL ENTRIES IN I_RECORD
WHERE WERKS = I_RECORD-WERKS.
IF SY-SUBRC EQ 0.
SORT I_MATNR BY MATNR.
ENDIF.
* Fetching Company Codes for repective Purchase Organizations
REFRESH I_T024E.
SELECT EKORG " Purchase Organization
BUKRS " Company Code
INTO TABLE I_T024E
FROM T024E
WHERE EKORG IN S_EKORG.
IF SY-SUBRC EQ 0.
SORT I_T024E BY EKORG.
ENDIF.
* Fetching SAP Data using Legacy Data.
REFRESH I_ZMVXREF.
SELECT D_ALTKN
D_BUKRS
M_ALTKN
INTO TABLE I_ZMVXREF
FROM ZMVXREF
FOR ALL ENTRIES IN I_RECORD
WHERE D_ALTKN = I_RECORD-LIFNR.
IF SY-SUBRC EQ 0.
SORT I_ZMVXREF BY D_ALTKN D_BUKRS.
ENDIF.
* Fetching Vendors from LFA1
IF NOT I_ZMVXREF[] IS INITIAL.
REFRESH I_LFA1.
SELECT LIFNR
INTO TABLE I_LFA1
FROM LFA1
FOR ALL ENTRIES IN I_ZMVXREF
WHERE LIFNR = I_ZMVXREF-M_ALTKN.
IF SY-SUBRC EQ 0.
SORT I_LFA1 BY LIFNR.
ENDIF.
ENDIF.
* Start Validating the flat file
CLEAR: WA_RECORD,
WA_T024E,
WA_ZMVXREF,
WA_LFA1,
WA_LOEKZ,
WA_MATNR.
LOOP AT I_RECORD INTO WA_RECORD.
L_TODAY = SY-DATUM.
L_STARTDATE = WA_RECORD-KDATB.
L_ENDDATE = WA_RECORD-KDATE.
IF WA_RECORD-DEL_FLAG IS INITIAL.
READ TABLE I_T001W INTO WA_T001W
WITH KEY WERKS = WA_RECORD-WERKS
BINARY SEARCH.
IF SY-SUBRC EQ 0.
* Cross-Reference check performed for the given Vendors
READ TABLE I_T024E INTO WA_T024E
WITH KEY EKORG = WA_RECORD-EKORG
BINARY SEARCH.
IF SY-SUBRC NE 0.
V_CROSS_REFERENCE_ERROR = C_VEN_ERR3.
ELSE.
READ TABLE I_ZMVXREF INTO WA_ZMVXREF
WITH KEY D_ALTKN = WA_RECORD-LIFNR
D_BUKRS = P_BUKRS
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE I_LFA1 INTO WA_LFA1
WITH KEY LIFNR = WA_ZMVXREF-M_ALTKN
BINARY SEARCH.
IF SY-SUBRC EQ 0.
V_CROSS_REFERENCE_ERROR = C_VEN_SUCS.
ELSE.
V_CROSS_REFERENCE_ERROR = C_VEN_ERR2.
ENDIF.
ELSE.
V_CROSS_REFERENCE_ERROR = C_VEN_ERR1.
ENDIF.
ENDIF.
* Legacy Vendor could not be mapped
IF V_CROSS_REFERENCE_ERROR EQ C_VEN_ERR1.
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES. "Inp.file err. occurd
WA_RECORD-DEL_FLAG = C_TRUE.
WA_RECORD-ERR_MSG = TEXT-007.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR.
* Legacy Vendor is mapped but the obtained SAP vendor doesn't exist.
ELSEIF V_CROSS_REFERENCE_ERROR EQ C_VEN_ERR2.
* Inp.file err. occurd
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-DEL_FLAG = C_TRUE.
WA_RECORD-ERR_MSG = TEXT-008.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR.
* Purchase Organization doesn't exist in T024E.
ELSEIF V_CROSS_REFERENCE_ERROR EQ C_VEN_ERR3.
* Inp.file err. occurd
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-DEL_FLAG = C_TRUE.
WA_RECORD-ERR_MSG = TEXT-014.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE EKORG = WA_RECORD-EKORG.
* Vendor is mapped and validated successfully
ELSEIF V_CROSS_REFERENCE_ERROR EQ C_VEN_SUCS.
* Checking for the deletion indicator for that record
CONCATENATE WA_RECORD-KDATB+6(4)
WA_RECORD-KDATB+3(2)
WA_RECORD-KDATB+0(2)
INTO
L_STARTDATE.
MOVE L_STARTDATE TO L_STARTDATE_C.
CONCATENATE WA_RECORD-KDATB+6(4)
WA_RECORD-KDATB+0(2)
WA_RECORD-KDATB+3(2)
INTO
L_STARTDATE_C1.
CONCATENATE WA_RECORD-KDATE+6(4)
WA_RECORD-KDATE+3(2)
WA_RECORD-KDATE+0(2)
INTO
L_ENDDATE.
MOVE L_ENDDATE TO L_ENDDATE_C.
CONCATENATE WA_RECORD-KDATE+6(4)
WA_RECORD-KDATE+0(2)
WA_RECORD-KDATE+3(2)
INTO
L_ENDDATE_C1.
READ TABLE I_LOEKZ INTO WA_LOEKZ WITH KEY
EMATN = WA_RECORD-EMATN
WERKS = WA_RECORD-WERKS
LGORT = WA_RECORD-LGORT
BINARY SEARCH.
IF SY-SUBRC EQ 0.
* Inpfle err.occured
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-003.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE
AND ZTERM = WA_RECORD-ZTERM
AND KTWRT = WA_RECORD-KTWRT
AND EPSTP = WA_RECORD-EPSTP
AND EMATN = WA_RECORD-EMATN.
* Validating the Purchasing Organization for Blank/Null
ELSEIF WA_RECORD-EKORG IS INITIAL.
* Inpfle err.occured
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-010.
WA_RECORD-DEL_FLAG = C_TRUE.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE
AND ZTERM = WA_RECORD-ZTERM
AND KTWRT = WA_RECORD-KTWRT
AND EPSTP = WA_RECORD-EPSTP
AND EMATN = WA_RECORD-EMATN.
* Validating the Plant for Blank/Null
ELSEIF WA_RECORD-WERKS IS INITIAL.
* Inpfle err.occured
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-039.
WA_RECORD-DEL_FLAG = C_TRUE.
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE
AND ZTERM = WA_RECORD-ZTERM
AND KTWRT = WA_RECORD-KTWRT
AND EPSTP = WA_RECORD-EPSTP
AND EMATN = WA_RECORD-EMATN.
* Validating the Contract Validity Start Date
ELSEIF L_STARTDATE_C1 GT L_TODAY. "#EC PORTABLE
* Inpfle err.occured
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-004.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB.
* Validating the Contract Validity End Date
ELSEIF L_ENDDATE_C1 LE L_TODAY. "#EC PORTABLE
* Inpfle err.ocrd
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
WA_RECORD-ERR_MSG = TEXT-005.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE.
* Checking for Material under the Plant for Agreement Type 'WK'
ELSEIF WA_RECORD-EVART = C_WK.
READ TABLE I_MATNR INTO WA_MATNR
WITH KEY MATNR = WA_RECORD-EMATN
BINARY SEARCH.
IF SY-SUBRC NE 0.
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES. "Inpfle err.ocrd
WA_RECORD-ERR_MSG = TEXT-006.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE LIFNR = WA_RECORD-LIFNR
AND EVART = WA_RECORD-EVART
AND EKORG = WA_RECORD-EKORG
AND EKGRP = WA_RECORD-EKGRP
AND WERKS = WA_RECORD-WERKS
AND LGORT = WA_RECORD-LGORT
AND KDATB = WA_RECORD-KDATB
AND KDATE = WA_RECORD-KDATE
AND ZTERM = WA_RECORD-ZTERM
AND KTWRT = WA_RECORD-KTWRT
AND EPSTP = WA_RECORD-EPSTP
AND EMATN = WA_RECORD-EMATN.
ENDIF.
ENDIF. " checking of deletion indicator
ENDIF. " checking for success of vendor cross reference
ELSE.
V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES. "Inpfle err.ocrd
WA_RECORD-ERR_MSG = TEXT-041.
WA_RECORD-DEL_FLAG = C_TRUE. "marking the record
MODIFY I_RECORD FROM WA_RECORD
TRANSPORTING DEL_FLAG
ERR_MSG
WHERE WERKS = WA_RECORD-WERKS.
ENDIF. " Plant checked to selection screen
ENDIF. " the records for which del_flag is initial
CLEAR: WA_RECORD,
WA_T024E,
WA_ZMVXREF,
WA_LFA1,
WA_LOEKZ,
WA_MATNR,
L_TODAY,
L_STARTDATE_C,
L_ENDDATE_C,
L_STARTDATE,
L_ENDDATE.
ENDLOOP.
LOOP AT I_RECORD INTO WA_RECORD.
IF WA_RECORD-DEL_FLAG = C_TRUE.
APPEND WA_RECORD TO I_ERR_REC.
CLEAR WA_RECORD.
ENDIF.
ENDLOOP.
ELSE.
MESSAGE E000 WITH TEXT-013. " no records in the flat file
STOP.
ENDIF.
ENDFORM. " validate_flatfile_data
*& Form DOWNLOAD_ERROR_FILE
* Downloads all records along with the records encountering the
* input file validation error
FORM DOWNLOAD_ERROR_FILE.
DATA L_ISDIR TYPE C.
IF V_INPUTERROR_FLAG = C_INPUTERROR_FLAG_YES.
V_FILENAME = P_IPERR.
* Check for the existence of the file.
IF RB_LOCAL EQ C_TRUE.
CALL FUNCTION 'TMP_GUI_GET_FILE_EXIST'
EXPORTING
FNAME = P_IPERR
IMPORTING
ISDIR = L_ISDIR
EXCEPTIONS
FILEINFO_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF L_ISDIR EQ C_TRUE.
MESSAGE I000 WITH TEXT-088.
STOP.
ENDIF.
ENDIF.
IF RB_LOCAL EQ C_TRUE.
* Download the Input Error File.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = V_FILENAME
FILETYPE = 'ASC'
WRITE_FIELD_SEPARATOR = '#'
TABLES
DATA_TAB = I_ERR_REC
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSEIF RB_SERVE EQ C_TRUE.
OPEN DATASET P_IPERR1 FOR OUTPUT IN TEXT MODE.
CHECK SY-SUBRC EQ 0.
CLEAR WA_ERR_REC.
LOOP AT I_ERR_REC INTO WA_ERR_REC.
IF WA_ERR_REC-DEL_FLAG = C_TRUE.
TRANSFER WA_ERR_REC TO P_IPERR1.
ENDIF.
CLEAR WA_ERR_REC.
ENDLOOP.
CLOSE DATASET P_IPERR1.
ENDIF.
ENDIF.
ENDFORM. " DOWNLOAD_ERROR_FILE
*& Form BUILD_BDC_DATA
* Populates BDC for all the fields neccessary for Open Contract Creation
FORM BUILD_BDC_DATA.
DATA: L_MAT_INDEX TYPE I,
L_CON_INDEX TYPE I,
L_SCA_INDEX TYPE I.
CLEAR WA_BDCDATA.
REFRESH: I_BDCDATA,
I_MESSTAB.
* Processing the bdc
CLEAR: WA_RECORD,
WA_RECORDPREV,
VEN_FLAG,
MAT_FLAG.
LOOP AT I_RECORD INTO WA_RECORD.
* Checks for the del_flag of the record.
IF WA_RECORD-DEL_FLAG EQ C_TRUE
OR WA_RECORD-DEL_FLAG EQ C_STRUE.
CLEAR WA_RECORD.
CONTINUE.
ELSE.
IF WA_RECORDPREV-LIFNR NE WA_RECORD-LIFNR
OR WA_RECORDPREV-EVART NE WA_RECORD-EVART
OR WA_RECORDPREV-EKORG NE WA_RECORD-EKORG
OR WA_RECORDPREV-EKGRP NE WA_RECORD-EKGRP
OR WA_RECORDPREV-WERKS NE WA_RECORD-WERKS
OR WA_RECORDPREV-LGORT NE WA_RECORD-LGORT
OR WA_RECORDPREV-KDATB NE WA_RECORD-KDATB
OR WA_RECORDPREV-KDATE NE WA_RECORD-KDATE
OR WA_RECORDPREV-ZTERM NE WA_RECORD-ZTERM
OR WA_RECORDPREV-KTWRT NE WA_RECORD-KTWRT.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0200'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RM06E-LGORT'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
* Cross-Reference check performed for the given Vendors
CLEAR WA_T024E.
READ TABLE I_T024E INTO WA_T024E
WITH KEY EKORG = WA_RECORD-EKORG
BINARY SEARCH.
IF SY-SUBRC EQ 0.
CLEAR WA_ZMVXREF.
READ TABLE I_ZMVXREF INTO WA_ZMVXREF
WITH KEY D_ALTKN = WA_RECORD-LIFNR
D_BUKRS = P_BUKRS
BINARY SEARCH.
IF SY-SUBRC EQ 0.
PERFORM BDC_FIELD USING 'EKKO-LIFNR'
WA_ZMVXREF-M_ALTKN.
ENDIF.
CLEAR WA_ZMVXREF.
ENDIF.
CLEAR WA_T024E.
PERFORM BDC_FIELD USING 'RM06E-EVART'
WA_RECORD-EVART.
PERFORM BDC_FIELD USING 'EKKO-EKORG'
WA_RECORD-EKORG.
PERFORM BDC_FIELD USING 'EKKO-EKGRP'
WA_RECORD-EKGRP.
PERFORM BDC_FIELD USING 'RM06E-WERKS'
WA_RECORD-WERKS.
PERFORM BDC_FIELD USING 'RM06E-LGORT'
WA_RECORD-LGORT.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0201'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'EKKO-KTWRT'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=AB'.
PERFORM CONVERT_DATE USING WA_RECORD-KDATB V_CONV_DATE.
PERFORM BDC_FIELD USING 'EKKO-KDATB'
V_CONV_DATE.
PERFORM CONVERT_DATE USING WA_RECORD-KDATE V_CONV_DATE.
PERFORM BDC_FIELD USING 'EKKO-KDATE'
V_CONV_DATE.
PERFORM BDC_FIELD USING 'EKKO-ZTERM'
WA_RECORD-ZTERM.
PERFORM BDC_FIELD USING 'EKKO-KTWRT'
WA_RECORD-KTWRT.
VEN_FLAG = 1.
L_MAT_INDEX = 1. "index for table-control of material
ENDIF.
* "first check for itemline
IF WA_RECORDPREV-EPSTP NE WA_RECORD-EPSTP
OR WA_RECORDPREV-EMATN NE WA_RECORD-EMATN
OR WA_RECORDPREV-KTMNG NE WA_RECORD-KTMNG
OR WA_RECORDPREV-NETPR NE WA_RECORD-NETPR
OR WA_RECORDPREV-PEINH NE WA_RECORD-PEINH
OR WA_RECORDPREV-BPRME NE WA_RECORD-BPRME
OR WA_RECORDPREV-IDNLF NE WA_RECORD-IDNLF
OR WA_RECORDPREV-WEBRE NE WA_RECORD-WEBRE
OR WA_RECORDPREV-MEPRF NE WA_RECORD-MEPRF
OR WA_RECORDPREV-LTEX1 NE WA_RECORD-LTEX1
OR VEN_FLAG EQ 1.
V_IND = L_MAT_INDEX.
IF V_IND GT 1.
V_IND = 2.
ENDIF.
CONCATENATE 'RM06E-EVRTP(' V_IND ')' INTO V_EVRTP1.
CONCATENATE 'RM06E-EPSTP(' V_IND ')' INTO V_EPSTP1.
CONCATENATE 'EKPO-EMATN(' V_IND ')' INTO V_EMATN1.
CONCATENATE 'EKPO-KTMNG(' V_IND ')' INTO V_KTMNG1.
CONCATENATE 'EKPO-NETPR(' V_IND ')' INTO V_NETPR1.
CONCATENATE 'EKPO-PEINH(' V_IND ')' INTO V_PEINH1.
CONCATENATE 'EKPO-BPRME(' V_IND ')' INTO V_BPRME1.
CONCATENATE 'RM06E-TCSELFLAG(' V_IND ')' INTO V_TCSELFLAG1.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0220'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=NP'.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0220'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
V_EVRTP1.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=DETA'.
PERFORM BDC_FIELD USING V_EPSTP1
WA_RECORD-EPSTP.
PERFORM BDC_FIELD USING V_EMATN1
WA_RECORD-EMATN.
PERFORM BDC_FIELD USING V_KTMNG1
WA_RECORD-KTMNG.
PERFORM BDC_FIELD USING V_NETPR1
WA_RECORD-NETPR.
PERFORM BDC_FIELD USING V_PEINH1
WA_RECORD-PEINH.
PERFORM BDC_FIELD USING V_BPRME1
WA_RECORD-BPRME.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0211'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'EKPO-WEBRE'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=DETZ'.
PERFORM BDC_FIELD USING 'EKPO-IDNLF'
WA_RECORD-IDNLF.
TRANSLATE WA_RECORD-EVART TO UPPER CASE.
IF WA_RECORD-EVART EQ C_WK.
PERFORM BDC_FIELD USING 'EKPO-WEBRE' 'X'.
ENDIF.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0212'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'EKPO-MEPRF'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=TXP'.
PERFORM BDC_FIELD USING 'EKPO-MEPRF'
WA_RECORD-MEPRF.
IF NOT WA_RECORD-LTEX1 IS INITIAL. "NE space.
PERFORM BDC_DYNPRO USING 'SAPMM06E' '0106'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RM06E-SELKZ(02)'.
PERFORM BDC_FIELD -
Advantages of using BAPI over LSMW for data transfer
Hellow,
Can anybody please give an input for advantages of using BAPIs in data transfer compare to LSMW. If we use BAPI for data transfer of master and transaction data how it is more usefull compare to LSMWs developed.
Thanks in advance
RaghavHi Raghavendra,
Refer the links..may help.....
[http://www.*******************/search?q=BAPIandLSMW+comparision]
[http://www.*******************/search?q=bapi]
Regards,
Mdi.Deeba
Maybe you are looking for
-
BW:Inventory stock Report issue based on Vendor and PO number
Dear Guru's. Requirement is to report different inventory stock's (Total Stock, blocked stock, stock in transit..etc) based on plant, material, storage location, vendor and purchase order in BW. For Example: Plant material Stock in Transit Total Sto
-
IPod not being recognized but will charge
I have a 5g 30 gb iPod. I recently installed the newest iTunes and updated the software on my iPod. After using it for a day or two I went back to my PC to update and recharge my iPod as I always do. I plugged it in and it would charge but would not
-
How to import/capture DVD or CD-ROM video into FCE4 to edit?
No copyright issues here. The DVDs are public relations material from government agencies or private companies that WANT their material to be used. How to get this off the disc and into Final Cut Express 4 in a format that can be edited? g.
-
Wrong payer value while creating PRO FORMA invoice for multiple delivery
Hi experts, I am trying to create PRO FORMA Invoice for multiple deliveries thru VF01. The problem here is the payer value is copied as the value of payer for the first delivery to all invoices. All other fields are picked up properly. Please help me
-
So I've finally decided to mess around in iDVD, thinking that it would be nice to know what to do if I ever want to use it... and when I start it I get this popup.. "your macintosh does not have a supported SuperDrive. Please note that while you will