More integration scenarios with the same business system in Int. Direct.?

Hi guys!
I need to integrate 5 business systems. I tried to create more integration scenarios (to do it clearly), but it is not possible to add already added business system to any other scenario...
What's the logic of this?
Can someone explain me it? Or some link?
Thanx Peter

hi Peter,
have you tried:
service without party ->
right click on your business system ->
add to scenario?
like this you can add your business system
to as many scenarios as you wish
Regards,
michal

Similar Messages

File to multiple IDOCs scenario with the same receiver system

Hi guys,
I have to design and implement the following scenario:
I will receive one file with many lines (Records) with data for materials, quantities, operations etc..
Based on the values of some fields of each line, I will have to create an IDOC for each material.
For example:
if operation type = "INSERT", and Labor = 001 then create 3 Idocs of type MBGMCR with movement types=101, 261,311 that have to be posted one after the other to the same receiver system.
else if operation type = "INSERT", and Labor <> 001 then create an Idoc MBGMCR with movement type=311 and plant = 1001.
else if operation type = "Delete", and Labor = 001 the created 3 Idocs MBGMCR with movement type=312, 262 1002 and post them serially to the same receiver system.
else if operation type = "Delete", and Labor <> 001 the created 1 Idoc MBGMCR with movement type=312.
All IDOCS are posted to the same SAP R/3 system. We do not care about the sequence, except for the cases where 3 IDOCS are created.
I am trying to think of a good design in performance terms.
It is obvious that I will need BPM for sure.
I am thinking of creating a mapping program that will produce 4 message types for the different cases from the initial file and then create a different message mapping for each case from the message type to the IDOC.
I am asking you if I have to include everything (mappings) in BPM with a "fork" step?
Or shall I produce only the 4 message types and then post them to R/3 and execute the mappings in R/3?
Best Regards
Evaggelos

hi,
>>I am thinking of creating a mapping program that will produce 4 message types for the different cases from the initial file and then create a different message mapping for each case from the message type to the IDOC.
To me this seems to be the right solution.
here u will create different message mappings and write them sequentially in interface determination. the multi mapping will then be utilised in transformation step in BPM.
thus if this is the only requirement there is no need of using a fork step.
[reward if helpful]
regards,
latika.

Dynamic Interface Determination Using the same Business System

Folks...
Does anyone have any good ideas on how to build a scenario where the same business system is used, but the interface mapping needs to be dynamic? I have a single JMS sender and 40 different message types on one side, and 40 ABAP Proxies on the other. The two solutions I see are as follows:
1. Create 40 separate JMS Senders with 40 different sender agreements
2. Create 40 Business Services for the same ECC system and utilize XPath expressions to support conditionally selecting an interface mapping
Neither of these in my mind is a great solution, does anyone have any others?
Mahalo,
Jonathan

Hi, I came cross the same problem on my current project, now I have following solution:
Create a number of JMS sender adapters, they all connect to same queue, but each JMS sender adapter only pick up particular type of message based on one JMS message property value. The message provider will be responsible to set the property value when they send message into the queue.
In JMS sender adapter, Parameter Tab -> Advanced Tab ->check Set Adapter-Specific message Attributes ->check Specify Additional JMS Message Properties (Maxmum of 10) -> Add Property name, e.g. "MsgType"
->Processing Tab -> Input Value in "JMS Message Selector", e.g. MsgType='WorkOrder'
after above setup, this adapter will only pick up messages that with "MsgType" Property value "WorkOrder"
For each type of adapter, you will create a JMS sender adapter and repeat the steps above, just put on the different Property value.
This approach will have number of Integration Scenarios, hence will have number of Sender Agreement.
I have tested the approach and it works.
Liang

Import ID Configuration Scenarios and keep the same Business System names

Hi Guys,
Is it possible to transport ID Configuration Scenarios Objects between 2 XI systems and keep the same names for both sender and receiver Business Systems ? That is, to skip the SLD lookup for transport Source and Transport Targets systems ?
I tried to create the same Business Systems under the same name twice, but this was not possible. Any ideas ?
The reason is that I want to transport all the objects from one XI DEV server to another XI DEV server.
Thank you,
Best Regards,
Evaggelos Gkatzios

Hi,
We have done same but with bit of manual work (without Transport).
Create SLD object in target system with same name as in Souce XI system SLD.
IR & ID was exported using TPZ files from Source system & were imported in Target system.
It used same object names in both XI systems.
Regards
Sushil

Why can't I upload Adobe CS3 on another Mac with the same operating system 10.5.8?

I purchased a MacBook Pro in 2008 and had it installed with Adobe CS3 at the Apple Store. I don't believe I was given any CDs or serial numbers to take home. I still have all the documentation for my other programs I installed myself, like Logic, Final Cut, etc. and those installed fine on my new Mac desktop computer, with the same operating system (10.5.8) as my MacBook. For whatever reason, I don't have the documenation for CS3, but I was able to download a serial number finder and locate the serial number for my version of CS3. But when I enter that serial number into the new computer, Adobe says the serial number is invalid. I thought standard licenses allowed for 2 computers (home/work) per serial number. This is the first computer I've tried to install CS3 on so it seems I should have no problem. Any help here? I'm on a ticking clock because my MacBook could crash any day and I need to get the programs switched over to my new computer. I appreciate any help.
Thanks,
Gerald

Contact serial number support by phone or web chat.
Mylenium

Building an Integration scenario with the Foundation Pack

From what I can see most people use AIA so they can make use of the available PIPS.
Has anybody used just the AIA Foundation pack to build integration scenarios?
We are experiencing many problems just trying to develope a simple end to end process and wondered if anyone had a simple Do's and DOn'ts, or Step by step guide to developing a scenario.
There is a lot of documentation and its very difficult to find the relevant information as it seems to be spread across multiple docs.
Stuart

We have made some small progress using the Foundation Pack 2.3.
I thought i'd share some of my experiences for others who are having problems and finding it difficult to get info.
We used the Artifcat Generater which creates the ABCS (BPEL process).
We found several issue:
1. In ABCS Requester (which calls an EBS implemented as an ESB process) - Partner Links did not work. We were getting Invalid Port Type errors (i will post the error message when i'm back in the office), but on close inspection everything looked ok but just did not work. The simple work around was to delete the Partner Link and re-enter it manually. I wasted days investigating this problem and ended up creating my own test BPEL process calling the EBS to prove it was configured correctly.
2. The XSL stylesheets could not be tested in JDEV. We ended up commenting out many of the generated XSL templates (generated by the Artifact Generater), the main culprit seems to be GetSenderNode template, haven't got to the bottom of the issue but ended up commenting out much of the code, specifically the aia.Getxxxxxx functions. Once I get time and find more information i'll post my findings.
Good luck.

SchemaFactory.newSchema can't be called more than one with the same sources

I am using Java 5 or Java 6. Did you already observed such behavior? Seems a bug but I didn't find a Bug ID match.
// Create an array of sources
final InputStream xsd = new FileInputStream("src/xml.xsd");
StreamSource[] sources = new StreamSource[1];
sources[0] = new StreamSource(xsd);
// Create the Schema Factory
final SchemaFactory schemaFactory = SchemaFactory.newInstance(XMLConstants.W3C_XML_SCHEMA_NS_URI); // Create a schema
Schema schema1 = schemaFactory.newSchema(sources);
// Create a second schema, it will throw an Excepion
Schema schema2 = schemaFactory.newSchema(sources);
If you are creating a new array of sources before to create the second schema, it works fine. It seems that SchemaFactory.newSchema is making the passed sources as not "reusable"
Thrown Exception :
Exception in thread "main" org.xml.sax.SAXParseException: schema_reference.4: Failed to read schema document 'null', because 1) could not find the document; 2) the document could not be read; 3) the root element of the document is not <xsd:schema>.
at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:236)
at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(ErrorHandlerWrapper.java:172)
at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:382)
at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:316)
at com.sun.org.apache.xerces.internal.impl.xs.traversers.XSDHandler.reportSchemaError(XSDHandler.java:2245)
at com.sun.org.apache.xerces.internal.impl.xs.traversers.XSDHandler.getSchema(XSDHandler.java:1590)
at com.sun.org.apache.xerces.internal.impl.xs.traversers.XSDHandler.parseSchema(XSDHandler.java:438)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaLoader.loadSchema(XMLSchemaLoader.java:556)
at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaLoader.loadGrammar(XMLSchemaLoader.java:523)
at com.sun.org.apache.xerces.internal.jaxp.validation.xs.SchemaFactoryImpl.newSchema(SchemaFactoryImpl.java:206)
at javaapplication5.Main.main(Main.java:55)

I've looked further into the matter and the problem is that the newSchema() method closes the underlying input stream, as a result of which there is no way to reuse the same source object if it is based on an input stream. There's another alternative: if it is not necessary for you to provide the schemas in an array, you can use the "newSchema(URL schema)" method. The advantage of using an URL object is that it can hold a reference to files inside a jar file.

Same business system in 2 differen scenarios

Hi Friends.
As it is not possible to create 2 businness systems in SLD to the same client , Is there any way to use the same business system , in 2 or more different scenarios in ID and how.
1000 thanks in advance.

Thanks for your replay.
The issue is in my scenario , I am using the business system related to client 100 , it is called
BSED0_100.
But now I want to use the business system of client 120 (BSED0_120) in the same scenario , to send an RFC request.
BSED0_120 it is already being used by another scenario , that why I can not se it in the list when I try to assign business system.
The question is how can I use BSED0_120 in my scenario despite it is being used by another scenario.
I tried to create another BS for client 120, in SLD but it said that theres is already a business system related to client 120.
I hope this explain the problem and many thanks.

Same Business system to two XI/PI landscapes and possibly two ESR's

Hello,
We are setting up a new PI 7 landscape in parallel to our current XI 3 landscape.
We do not foresee a migration of XI to PI in the short run so the two systems, XI and PI will run next to each other.
The problem we then have is with the ESR and proxies. The same business system must be able to connect to both XI and PI and must also be able to generate proxies with interface content from XI as well as with interface content from PI.
The connection from business system to ESR repository seems to be 1:1, only one ESR per business system (defined via SXMB_ADM)
Is there a way to allow ESR content from two XI/PI systems in one business system simultaneously?
How do we solve this issue?
Thanks
Tom

Hi Tom,
as you already said its 1:1 connection between ESR and business system. The connection is taken from the exchangeProfile, refer to [ABAP Proxy Generation on SAP help|http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/content.htm].
I suggest you to create the interfaces in XI, generate the proxies and transport to PI.
How are you going to use the to integration servers for ABAP proxy scenarios? I am asking because you only can use one integration server at a time for outbound ABAP proxies in SAP standard. You define the URL or RFC destination to the corresponding integration server in SXMB_ADMIN.
Regards, Martin

SLD- Same business System

Hi,
I have an APO system which has developement and production only.
We had developed an interface via PI where PI environments are in Dev/QA/Regression and Production.
Our SLD is shared between DEV/QA/Regression and separeate SLD in Production.
I am getting transport error between Dev and QA since it was not able to find a obligatory transport target.
I managed to download the same business system used in Dev for QA, but still the transport is giving error.
The business system is of ABAP type. Let me know how to deal with this.
Regards
Sam

Hello Sam,
in theory you're right, but this is not possible in SLD. Every Business System can only be assigned to exactly one environment (if I recall correctly it is a dropdown menu), so you cannot map it on itself. For each transport to a different environment you'll have to assign a different BS. So either you work with dummies or you leave out one transport, I don't think you have many other options.
One other option I have seen is two clients on the ABAP DEV system where one of them would serve as test/dev client and the other one as QAS client.
A different option would be to work with Business/Communication Components and avoid this transport rules. But since you use an ABAP system this is not the recommended procedure.
Regards,
Jörg

XML Publisher(XDODTEXE) in EBS taking more time with the same SQL in TOAD

HI
XML Publisher(XDODTEXE) in EBS taking more time with the same SQL in TOAD.
The sql has 5 union clauses.
It takes 20-30 minutes in TOAD compared to running through Concurrent Program in XML Publisher in EBS taking around 4-5 hours.
The Scalable Flag at report level is turned on with the JVM options set to -Xmx1024m -Xmx1024m in Concurrent Program definition.
Other configurations for Data Template like XSLT, Scalable, Optimization are turned on though didn't bounce the OPP Server for these to take effect as I am not sure whether it is needed.
Thanks in advance for your help.

But the question is that how come it is working in TOAD and takes only 15-20 minutes?
with initialization of session ?
what about sqlplus ?
Do I have to set up the the temp directory for the XML Publisher report to make it faster?
look at
R12: Troubleshooting Known XML Publisher and E-Business Suite (EBS) Integration Issues (Doc ID 1410160.1)
BI Publisher - Troubleshooting Oracle Business Intelligence (XML) Publisher For The Oracle E-Business Suite (Doc ID 364547.1)

How to conf in Hyperion, so the system couldn't login with the same user

Hai.....
how to configure in Hyperion, so the system couldn't login with the same user id in different machine ? (could you please provide me with detail step by step ? )
rgds
uka fp

fane_j wrote:
Sally R. wrote:
Someone gave me a suggestion to go to the terminal and type in the following:
ls /Users/Shared/.*.so
This was published on MacWorld's site, and it's not a very good tip. Try this instead
ls -la /Users/Shared/*.so
Turns out I was wrong about that. Somebody else suggested something even more complicated and got this reply:
By bastion
Fri Feb 24 08:49:05 PST 2012
PeterSParker said
Your terminal statement has an extra "." in it that prevents it from working.
Also, you should add the options -alR to show what is happening, and to search subdirectories.
The revised command looks like this:
ls -alR /Users/Shared/*.so
The above is completely wrong. The command as shown in the article is appropriate.
The "." is not extra and doesn't prevent the command from working. It's specifying that you're listing files that start with a period and end with ".so" with anything in between being matched.
Because you're explicitly searching for things that start with "." you don't need the -a flag.
Because you only care about simple existence and not any metadata you don't need -l.
Because the files of interest are installed in /Users/Shared directly, and not subfolders thereof, you don't need -R.

How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?

Dear all
How to Setup Forward Error Handling in PI Scenarios. Can you help me with the same with screen shots if possible?
Thanks
Regards
karan

Hello
These are the following errors
1. Trace level="1" type="T">no interface action for sender or receiver found</Trace>
2. <Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!
3.
<Trace level="1" type="T">Application Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</
Trace level="3" type="T">No persisting of message after plsrv call, because of config</Trace>Trace level="3" type="T">Error of the prevous version:</TraceTrace level="3" type="T">Error ID APPLICATION_ERROR</Trace>
tThere are repeating errors also.
TThanks
Regards
kkaran

Can I have more than 1 susbcriber with the same email address?

I have developed a BC secure zone in Muse as a members only area. This works fine. I have subscribed all the members and all is OK except that I find if I try to subscribe 2 members with the same email address (e.g. a married couple with a shared email address), the first subscription is overwritten by the second. Is there a solution or do I just live with it?

Hi Neil,
This is the default behavior of the system because email is the unique identifier. You can't have more than 1 subscriber with the same email address.
Regards,
Aish

I have 3 systems with the same issue (BSDOD) Event ID 41

I have 3 systems with the same issue that 1 to 4 times a day it crashes. This is on a VM complex running Win2K8 SR2.
I say many Symbol search path issues and fixed that on the system that can see internet (others are behind BSO Firewall)
Now I am down to the last issue with this first server W2K8.
If anyone cal help me it would really make my day...............
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
OK
C:\Windows\Minidump
0: kd> !analyze -v
*                        Bugcheck Analysis
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffffa7f0ee7a410, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88000e0b9ec, address which referenced memory
Debugging Details:
READ_ADDRESS: fffffa7f0ee7a410
CURRENT_IRQL: 2
FAULTING_IP:
NETIO!FreeMatchBufListInternal+1c
fffff880`00e0b9ec 488b5910        mov     rbx,qword ptr [rcx+10h]
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
TRAP_FRAME: fffff880021d8990 -- (.trap 0xfffff880021d8990)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa7f0ee7a400
rdx=0000000000000002 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88000e0b9ec rsp=fffff880021d8b20 rbp=fffffa800cd199b8
r8=00000000000017e8 r9=00000000000000d0 r10=fffff80001603000
r11=0000000000000099 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na po nc
NETIO!FreeMatchBufListInternal+0x1c:
fffff880`00e0b9ec 488b5910        mov     rbx,qword ptr [rcx+10h] ds:fffffa7f`0ee7a410=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80001678169 to fffff80001678bc0
STACK_TEXT:
fffff880`021d8848 fffff800`01678169 : 00000000`0000000a fffffa7f`0ee7a410 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`021d8850 fffff800`01676de0 : fffffa80`0d6cdc50 fffff880`010d8ba0 00000000`00000000 fffffa80`0ec7a170 : nt!KiBugCheckDispatch+0x69
fffff880`021d8990 fffff880`00e0b9ec : fffffa80`0f173cf0 fffffa80`0cd199b8 00000000`48706657 fffffa80`0cd199b8 : nt!KiPageFault+0x260
fffff880`021d8b20 fffff880`00e150f3 : fffffa80`0ec7a170 fffffa80`0cd199b8 00000000`00000011 fffffa80`0cd199b8 : NETIO!FreeMatchBufListInternal+0x1c
fffff880`021d8b50 fffff880`00e13f9d : fffffa80`0ec7a190 00000000`00000000 fffff880`021d8c30 fffff880`00e9273f : NETIO!FreeCacheEntry+0xa3
fffff880`021d8b90 fffff880`00e15176 : fffff880`021d8c30 00000000`00000000 fffffa80`0cd82660 fffffa80`0cd199b8 : NETIO!FreeSomeCacheBucketEntries+0x6d
fffff880`021d8be0 fffff880`00e1e221 : 00000000`0000000c fffffa80`0cd82660 fffffa80`0c020004 fffffa80`0cd82660 : NETIO!FreeSomeCacheEntries+0x36
fffff880`021d8c10 fffff880`00e073de : fffffa80`0f000003 fffffa80`0f173cf0 fffffa80`0cd82660 fffffa80`0f173cf0 : NETIO! ?? ::FNODOBFM::`string'+0x7a46
fffff880`021d8c50 fffff800`0196fc93 : 00000000`00000001 00000000`00000001 fffffa80`0f173cf0 fffffa80`0cd82660 : NETIO!TickWorker+0xe
fffff880`021d8c80 fffff800`01682261 : fffff800`0181e200 fffff800`0196fc01 fffffa80`0cd82600 fffff800`0181e2d8 : nt!IopProcessWorkItem+0x23
fffff880`021d8cb0 fffff800`0191473a : 498b4809`75c43b41 fffffa80`0cd82660 00000000`00000080 fffffa80`0cd78740 : nt!ExpWorkerThread+0x111
fffff880`021d8d40 fffff800`016698e6 : fffff880`0205d180 fffffa80`0cd82660 fffffa80`0cd83660 ffffff33`e9ed75cd : nt!PspSystemThreadStartup+0x5a
fffff880`021d8d80 00000000`00000000 : fffff880`021d9000 fffff880`021d3000 fffff880`021d89e0 00000000`00000000 : nt!KxStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
NETIO!FreeMatchBufListInternal+1c
fffff880`00e0b9ec 488b5910        mov     rbx,qword ptr [rcx+10h]
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: NETIO!FreeMatchBufListInternal+1c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: NETIO
IMAGE_NAME: NETIO.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 5294760d
FAILURE_BUCKET_ID: X64_0xD1_NETIO!FreeMatchBufListInternal+1c
BUCKET_ID: X64_0xD1_NETIO!FreeMatchBufListInternal+1c
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0xd1_netio!freematchbuflistinternal+1c
FAILURE_ID_HASH: {4f4b2cba-a197-a425-b97a-8f7cbfbac87f}
Followup: MachineOwner

GWD
This does not surprise me at all. These were/are related to your Symantec. IMHO it is bloatware and after doing 10,000+ BSODS I have seem it more than any other malware app I would remove it and use MSE in its place
Symantec is a frequent cause of BSOD's.
I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN
http://www.microsoft.com/security_essentials/
For Norton 360 use this http://symantec.pcperformancetools.com/norton-360-how-to-uninstall.html
Microsoft (R) Windows Debugger Version 6.3.9600.17237 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\Minidump\102714-47923-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: Server, suite: Enterprise TerminalServer SingleUserTS
Built by: 7601.18526.amd64fre.win7sp1_gdr.140706-1506
Machine Name:
Kernel base = 0xfffff800`0165e000 PsLoadedModuleList = 0xfffff800`018a1890
Debug session time: Mon Oct 27 05:05:39.635 2014 (UTC - 4:00)
System Uptime: 1 days 4:50:11.507
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck C5, {8, 2, 1, fffff80001808147}
*** WARNING: Unable to verify timestamp for SYMEFA64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
Probably caused by : SYMEFA64.SYS ( SYMEFA64+27c5 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
DRIVER_CORRUPTED_EXPOOL (c5)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is
caused by drivers that have corrupted the system pool. Run the driver
verifier against any new (or suspect) drivers, and if that doesn't turn up
the culprit, then use gflags to enable special pool.
Arguments:
Arg1: 0000000000000008, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff80001808147, address which referenced memory
Debugging Details:
BUGCHECK_STR: 0xC5_2
CURRENT_IRQL: 2
FAULTING_IP:
nt!ExAllocatePoolWithTag+537
fffff800`01808147 48895808 mov qword ptr [rax+8],rbx
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT_SERVER
PROCESS_NAME: ccSvcHst.exe
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
TRAP_FRAME: fffff880069f9580 -- (.trap 0xfffff880069f9580)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa800f880f60
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80001808147 rsp=fffff880069f9710 rbp=0000000000001000
r8=0000000000000000 r9=fffff80001863770 r10=fffff80001863588
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
nt!ExAllocatePoolWithTag+0x537:
fffff800`01808147 48895808 mov qword ptr [rax+8],rbx ds:00000000`00000008=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff800016d3169 to fffff800016d3bc0
STACK_TEXT:
fffff880`069f9438 fffff800`016d3169 : 00000000`0000000a 00000000`00000008 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`069f9440 fffff800`016d1de0 : fffff880`069f9690 fffffa80`0d157d80 fffff880`069f9500 fffff800`01863770 : nt!KiBugCheckDispatch+0x69
fffff880`069f9580 fffff800`01808147 : fffff8a0`078d3140 00000000`00000702 fffffa80`0f95c800 fffff8a0`078d33a8 : nt!KiPageFault+0x260
fffff880`069f9710 fffff880`016bf7c5 : fffff880`00000000 00000000`00000000 fffffa80`0ddc6530 fffff880`00000000 : nt!ExAllocatePoolWithTag+0x537
fffff880`069f9800 fffff880`00000000 : 00000000`00000000 fffffa80`0ddc6530 fffff880`00000000 00000000`00000000 : SYMEFA64+0x27c5
fffff880`069f9808 00000000`00000000 : fffffa80`0ddc6530 fffff880`00000000 00000000`00000000 fffff880`016bf514 : 0xfffff880`00000000
STACK_COMMAND: kb
FOLLOWUP_IP:
SYMEFA64+27c5
fffff880`016bf7c5 ?? ???
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: SYMEFA64+27c5
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: SYMEFA64
IMAGE_NAME: SYMEFA64.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 530fcaf7
FAILURE_BUCKET_ID: X64_0xC5_2_SYMEFA64+27c5
BUCKET_ID: X64_0xC5_2_SYMEFA64+27c5
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0xc5_2_symefa64+27c5
FAILURE_ID_HASH: {c40fe135-4c88-ce5c-c7b0-361d3927c5c6}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

More integration scenarios with the same business system in Int. Direct.?

Similar Messages

Maybe you are looking for