More issues with 7.4.1 & 7.4.2 - help needed : tried the usual fixes.....
I have the dual band 2.4 or 5GHz model AEBS, Belkin powered 4 port hub, Canon IP1600 printer, 40GB & 120 GB HFS+ USB drives. Win 7 64bit & XP machines.
I only 2 weeks ago did the FW upgrade.
With prior to these 2 FW's, i had issues with my printer not printing the whole page, it would always cut mid last line and then freeze. Had to cycle the printer to get the page out. It would not necessarily print the 2nd time either. The HDD's going through a hub worked fine. I updated to 7.4.1 hoping that would fix the printer issue, it did not. I then began getting "disk repair needed" on both HDD's over the next week; culminating upon both HD's going corrupt.
I reformatted both and moved all my music/movies back, and all was good for a week. Then today, turned both drives on at different times, and both need disc repair again.
So i unplugged them and hooked them up to my Linux Mint rig, and there was no apparent corruption, and all the files were playable.
SO I updated to 7.4.2 tonight, and the printer issue is still happening. BUT the 2 HDD are just fine now, after the update....so this leads me to think there was/is an issue with the router? Oh, i tried to directly plug the HDD into the router as well b4 the most recent update but still disc needs repair....of course they have been working fine for the last 2 hours...
Anyone have any ideas? Im ready to pull my hair out...Thanks in advance.
Message was edited by: user2009
Hey Chris, thanks for responding, in my above post I mentioned my troubleshooting:
Since updating my iPhone 5S (T-Mobile) to both 8.0.1 and then 8.0.2 I've had more issues than I've ever had with any iOS in the past (with the exception of iPhone 4 running iOS 7, but clearly that is an older phone, not a 1 year old model like the 5S). Have tried resetting, powering off, etc too by the way.
Similar Messages
-
After the IOS 7.1 update I have issue with Game Center, I'm not been able to load the games. The apps don't seems to be able to connect to game centre. How to resolve the issue?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
my iPhone4 is showing no service so i power down but when i power back up it says to plug into itunes and restore, i had this same issue with another iPhone and apple replaced it but its doing the same thing on this phone any help would be apprecaited
AAAAAANNNNNNDDDDDDD go figure no one can help!!!!! i just dont know what to do, i guess no-one else does either lol!!!! thanks anyway!!!!!
-
We use dial up and upon updating to Firefox 10 we have had issues with facebook/playing games...please help!
Hi nancybrendel,
Have you looked at the Knowledge Base article [[Problems using Facebook in Firefox]]? There is a lot of good troubleshooting information in there. Please be sure to try all of the suggested steps. Each one is valuable and may be the answer to your issue.
Hopefully this helps! -
I am trying to transfer my purchases from my iPhone 5 to my new Mac computer. I get the message stating that it can only be synced with one computer at a time. I have tried the 2 other ways and I get no options to transfer my purchases. Help?
If you see Devices in the big list on the left-hand side of iTunes, it should show the name of your iPhone right below it. You can right-click (or hold ctrl and left click) on the name of the iPhone there, and choose "transfer purchases from iPhone".
If you're on iTunes 11, you won't see the big list of the left until you go to the View menu at the very top (where you see iTunes/File/Edit/View/etc) and choose Show Sidebar. Then do the same thing: right-click or ctrl and left-click on the iPhone's name below Devices and "transfer purchases from iPhone".
It'll ask you to authorize the computer for your Apple ID if you haven't yet; to do that, you just type your Apple ID and password in when it asks. If it says you are not authorized but doesn't automatically give you an option to do so, then you can go to the Store menu at the very top and choose "authorize this computer". -
I have an HP Photosmart 7510 & cannot connect by WiFi, I have tried the support fix with no success.
Hi
I have an HP Photosmart 7510 & cannot connect by WiFi, I have tried the support fix with no success.
I have tried the suggested from below;
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=uk&dlc=en&lang=en&lc=en&product=507...
I have not tried to assign the static IP address suggested in step 6 on the web link above, I am not that technical & do not fully understand how to perform this task & am surprised HP expect retail client to follow this, if is a bit technical I think you must agree.
Anyway, the WiFi or Wireless blue led is blinking.
If I try to discover my wireless network, it is not displaye like it used , nor are my neighbors, my mobile Samsung Galaxy S displays my network and my neighbors when the phone in placed by my 7510.
When I try to enter the SSID & key, my 7510 times out without connecting to my router.
My pc is connected directly to my router (Buffalo) and I use a Fujitsu Desktop running Win 7 32bit.
By the way, I have done a "Factory reset" to my 7510 & this did not help at all.
Can anyone help?
Is my 7510 faulty?
Thanks in advance.I saw your post and forwarded it to the right people for their review. You should hear back from someone shortly via private message on this Forum.
-
I have creative suite 3 master collection with the licensing subsystem has failed catastrophically. I've tried the FlexLicensing fix with no success.
I found this
plumeragent, "Licensing has stopped working error durinng launch of Photoshop CS3" #2, 9 Jul 2007 2:20 pm
if you read it it says to open the Flex folder and change the name. I did that and the apps work but I was not asked for the serial number again. I was in in 10.4.11 and just upgraded to 10.5.4 could that have caused this as I was running fine before. -
More Issues with 8.0.1 and 8.0.2 than ever had before
Since updating my iPhone 5S (T-Mobile) to both 8.0.1 and then 8.0.2 I've had more issues than I've ever had with any iOS in the past (with the exception of iPhone 4 running iOS 7, but clearly that is an older phone, not a 1 year old model like the 5S). Have tried resetting, powering off, etc too by the way.
Here is the list of things I've had coming up as issues:
- Safari Video Playback (Constantly buggy, either never loads, or when it does scrubbing through video is like a broken record)
- Graphical glitches with top screen (Clock / battery portion) always appearing layered over other programs when it shouldn't be.)
- iMessage ( SMS and MMS to non-iOS users takes SEVERAL or MORE attempts to deliver even with 4G/LTE on)
- Mail - When new mail messages arrive in inbox the Notification pops up DELAYED, along with the delayed alert sound (sometimes occurs in Messages/Texts)
- Notifications pop up and sometimes stay on the screen longer than usual (is this a new feature / suppose to be helpful? It isn't.)
- Keyboard Graphical issues (when typing in text boxes in emails or websites, the keyboard cursor becomes delayed and has to catch up with my keystrokes)
- Overall slightly slower (again I know iOS 8 is optimized for whatever the newest hardware is out (iPhone 6), but is there really that much of a difference in hardware between the 5S and 6 that makes this version of iOS 8 so buggy on my phone?)Hey Chris, thanks for responding, in my above post I mentioned my troubleshooting:
Since updating my iPhone 5S (T-Mobile) to both 8.0.1 and then 8.0.2 I've had more issues than I've ever had with any iOS in the past (with the exception of iPhone 4 running iOS 7, but clearly that is an older phone, not a 1 year old model like the 5S). Have tried resetting, powering off, etc too by the way. -
today I get issues with my z10 device. When I in a phone call, the screen don’t auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently. can anyone help me with this?
Same issue already several weeks.
And we are not alone:
http://forums.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/i...
At all there is, I think, 4 threads in parallel about this issue at CB forums. One of the:
ms.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/index5.html
I already contacted BB Help at Twitter. Answer:
Thanks for the information. It seems that you have installed an OS version higher than the one supported by your carrier on your device. Please contact your carrier to get the supported OS version and try the proximity and light sensors. Let us know if you need further assistance. Cheers. ^LFC.
I did replay:
You are confused me. Phone got updates over network automatically. On crackberry forum a lot of people from different countries and with Different OS version, but with the same problem. Hi, this is thread at CrackBerry: http://forums.crackberry.com/blackberry-z10-f254/proximity-sensor-906493/index3.html
This my replay was 22 of march. No more answer from BB.
I can't contact my operator - 3UK, because I bought my from on Amazon from Amazon. This phone not from operator - seller is Amazon.
What I already done:
For last week, I read, how to install OS using Sachesi and Autoloader. I used Sachesi to load 3 UK version, I installed autoloader from this links:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
This
For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925
Doesn't help
And this:
For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS
No result.
After install all of them phone wants to update to 10.2.1.2102 by air.
BBVE in all versions sais: Can not obtain data from sensors.
Dear BB support, please, can you explain, how to resolve this issue? -
Sync Issues with iPhone 4/4S? I think I've found the problem.
Hello all!
I and quite a few others here have had syncing issues with our iPhone 4, and I think I've found a solution. I use an application called iToner 2 to create my ringtones, and after deleting all my iToner 2 created ringtones, I have no more sync issues.
If you are using any type of application that is designed to work with the iPhone and iTunes, I would suggest you not use it until it gets updated to work with iTunes 10.5 and iOS5.
I hope this helps.
Mike.solved in store
-
Whether I'm watching a movie purchased via my Apple TV or a movie stored on my iTunes app on my iMac I'm having constant issues with Apple TV either cutting out (randomly - not related to wifi) or not being able to access the 'My Computer' files when my iMac drops out the wifi connection because its in power saving mode. I also have issues with 'Home Sharing' settings having to be reset and sometimes having to unplug the Apple TV power cord and plugging it back in to be able to successfully reset these settings so I can get back to watching whatever it was I was viewing on Apple TV. My TV is connected to wifi as well so I'm wondering if there are any changes I can make in the settings of both my Apple TV and iMac or TV so that I can just select whatever it is I want to watch and be able to watch the entire movie or episode without it dropping out or having to keep flicking the mouse on the iMac to keep the computer connected to wifi? I love Apple products generally but Apple TV is proving to be a pain in the a**e lately. Hopefully someone can help me sort these issues out
Intermittent issues will point to a local network/wifi issue.
Reboot ATV and router, make sure both are up to date
Try ethernet
The home sharing connection will cut out if the iMac goes to sleep. -
Wireless connectivity issues with Macbook Pro and At&t service HELP!!!!!
I have three Computers two PC's and one Macbook Pro( the latest model).My desktop PC is used by ethernet, my girls laptop is used wirelessly and finally my MBP was being used wirelessly.
I started off with only the two PCs and my internet connection never had a problem and I was doing everything from: on the internet to downloading.
Before I bought my MBP I had also switched from internet and phone bundle to just internet from At&t service. So when I got my first MBP I notice that I was loosing wireless connection with both my girls pc laptop and my MBP so i thought it was because I had just switched service, though they send out a service technician and we came to a conclusion that it was the MBP. (I was loosing signal via wireless and ethernet). So we tried to see if both my girls laptop(wireless) and my PC desktop (ethernet) would run into the same issue which it did not.(MBP was turned off)
So I decided to go my nearest Apple store and let them know what was going on. So I told them what was going on and they said It must be the airport card, and they ended up changing it. When I get home I discover that not only I am having the same issue but other issues too. I went back they ran some diagnostic and they said it was defective and they gave me a new one few days later.
So in the mean time that I waited for my new one to arrive I used my PC desktop and my girl kept using her laptop and guess what no issue what so ever for one whole week. Now I receive my new MBP(they bumped the specs a little), went home set it up and still the same issue though I dont have the issue when Im using via ethernet. Just a view minutes ago I tried removing the ethernet and using the airport/wireless and within a few minutes I lost the signal.
I have the gateway 2WIRE model(2701HG-B) modem/router.
Is there something wrong? what do I have to do to make this work?Hi Guys, I bough my Mac almost two years ago. All this time I have experienced the same issue. There are tons of discussions re this issue in the internet. Unfortunately, Apple has done nothing to fix it. I have tried a lot of different options, but they work no longer then 1-2 days. The official fix - does not exist so far. It is quit strange, isn't? I can share my experience: if you go to AirPort Utility - Manual Setup - Wireless and then change Channel, it could help you till the moment you restart your computer; next time you need to repeat it again. It takes 2 minutes. Not sure that it would work for you but you could give it a try. Well, not the best option. Anyway Apple must fix it asap! Hello Apple, do you hear us? Good luck.
-
Having issues with painting in Photoshop CS5, can you help?
Hi,
I'm having issues with painting. At the end of a brushstroke (not the stroke option), I see a little "dot" that appears, instead of a fine end. Do you know what I'm talking about, and how to fix it?
Thanks!This may sound strange, but try starting your brush strokes at the top of the page. That way the tendency is for the stylus tip to lift at the end of the stroke. Going bottom to top tends to push the tip into the tablet. You could also look at Brush Shape Dynamics (F5). It looks like you have Size jitter set to pen Pressure, but set the minimum siz to 0% - if not already set so. Then it is a matter of lots of practice, and perhaps making full use of the CS5 rotate screen feature (r) to keep your brush strokes at whatever is the optimum angle for you.
-
Are there any compatability issues with V6 and Norton 360 as there have been in the past?
When I last tried to upgrade to a newer version, a number of my Norton 360 features would not function and I got a popup message saying that there was some sort of compatability problem. I've subsequently had to go back to V4.
Ne there aren't any "issues" with Norton. Norton released a compatibility patch for Firefox 6 last Tuesday, a couple of hours after Firefox 6 was released.
http://community.norton.com/t5/Norton-360/Update-Available-Firefox-6-0-Compatibility-Patch/td-p/512484 -
Guys,
I hope you can help me out on this, but I have a problem...
A few years ago I created an iCloud account on my old iPhone 4S.
Back then, I used an email address for iCloud registration that's no longer active.
Anyway, I also made an iCloud email address back then.
- Now I have a brand new iPhone 5S (totally love it)... and I just created an iCloud acccount with an other email address than I used back at the time I had my old 4S.
But... now I would like to use the same 'old' iCloud email address that I used on my previous 4S iCloud account.
Since that previous iCloud account is linked to an email address that no longer exists, I don't know how to do this!!
Can someone please help??Each of you should set up your separate iCloud account on your own computer using your Apple ID. This gives you two independent iCloud accounts.
Note that an iPad is not a multi-user device. It can only be synced with one account.
Maybe you are looking for
-
How to resolve some install problems for 7.02 on Windows 7 64 bit
This is a short re-cap of some of the issues I came across when installing NSP 7.02 on Win 7 system. I'm posting it here rather than writing a blog - there are numerous excellent guides already out there, but the particular issues below meant I had t
-
I synced my ipod to my computer and all my music disappeared. I tryed resyncing it and it would only sync my apps and not my music. I cant add music to my ipod. I something wrong with the USB port in the IPOD, the USB Cord, or ITUNES itself. Itunes s
-
Transfer of Windows 7 from HDD to SSD on same computer!?
Hi, Ordered a new Solid State Drive for my computer so it will boot faster when i install my OS onto it. I have Windows 7 currently installed onto my HDD. Problem is how do i get my OS (Windows 7) from my Hard drive to my SSD? Have important files on
-
Connecting IPad to Cable Internet
I am considering purchasing an IPad for an 80 year old gentleman. He has wireless internet in his home but has cable internet at his summer residence. Is there any adapter to accomplish an internet access to a cable internet system, without the insta
-
I have just completed my first non-PC DVD creation!!! I have run into a problem that I can't figure out, I have checked the discussion groups and I don;t believe anyone other than me has run into this: I grabbed some photos (3) from my iPhoto collect