More KDE problems
So yeah, I have managed to download KDE, and now I'm having trouble starting it...
I feel dumb, forgive me for posting this much on the forums this evening.
I see in the KDE wiki page that there are 2 ways to start KDE. So I first try KDM. When I did pacman -S kdebase-workspace it seems like it had already been installed. I guess when I downloaded KDE? Then I see on this wiki page that an "example configuration for KDM" can be found at /usr/share/config/kdm/kdmrc. So I try to vim that, and it's empty, oh joy. I then try to ls /usr/share/config/kdm and I see there's a README file. Oh wait, that's blank too -_- Whatever, so then I try to enter this command as instructed:
kdesu kcmshell4 kdm
And the output is this:
Fontconfig error: "/etc/fonts/conf.d/20-unhint-small-dejavu-sans-mono.conf", line 1: no element found
[insert about 5 more lines of "fontconfig errors" for different fonts here, all saying "line 1: no element found]
kdesu: cannot connect to X server
So at this point I throw my hands in the air and give up on "KDM" and decide to try method #2, "xinitrc." I copy xinitrc to ~ and comment out "exec startkde" as instructed. I then type xinit in the command line, and the output shows a bunch of initializing built in stuff, and then it says
[dix] Could not init font path element /usr/share/fonts/TTF/, removing from list!
/home/ben/.xinitrc: line 15: /usr/bin/startkde: Success
xinit: connection to X server lost
waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.
So then I try startx. Same thing minus the bit about font path element.
What should I try... ?
ewaller wrote:Does X work on your machine? Has it worked in the past, or is this a brand new installation? Could you post your /var/log/Xorg.0.log ??
Erm... startx does not work if that's what you mean. I'm pretty sure that was the command that worked yesterday, before I started all of this KDE stuff. It was just a very crude looking "GUI" if you can even call it that, with three windows that I had to type exit in to get back to the command line. Yesterday was also when I installed this onto the flash drive, so it's a pretty new installation...
Here is the log:
[ 1738.271]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 1738.277] X Protocol Version 11, Revision 0
[ 1738.277] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 1738.278] Current Operating System: Linux archbox 3.9.9-1-ARCH #1 SMP PREEMPT Wed Jul 3 22:45:16 CEST 2013 x86_64
[ 1738.278] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=cdf79b9a-bd86-4d96-bd57-648a68263a8b ro quiet
[ 1738.280] Build Date: 01 July 2013 10:48:42AM
[ 1738.280]
[ 1738.281] Current version of pixman: 0.30.0
[ 1738.282] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 1738.282] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1738.286] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 5 20:27:44 2013
[ 1738.286] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1738.287] (==) No Layout section. Using the first Screen section.
[ 1738.287] (==) No screen section available. Using defaults.
[ 1738.287] (**) |-->Screen "Default Screen Section" (0)
[ 1738.287] (**) | |-->Monitor "<default monitor>"
[ 1738.287] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1738.287] (==) Automatically adding devices
[ 1738.287] (==) Automatically enabling devices
[ 1738.287] (==) Automatically adding GPU devices
[ 1738.287] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1738.287] Entry deleted from font path.
[ 1738.287] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1738.287] Entry deleted from font path.
[ 1738.287] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1738.287] Entry deleted from font path.
[ 1738.287] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1738.287] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1738.287] Entry deleted from font path.
[ 1738.287] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1738.287] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 1738.287] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1738.287] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1738.287] (II) Loader magic: 0x7fdc20
[ 1738.287] (II) Module ABI versions:
[ 1738.287] X.Org ANSI C Emulation: 0.4
[ 1738.287] X.Org Video Driver: 14.1
[ 1738.287] X.Org XInput driver : 19.1
[ 1738.287] X.Org Server Extension : 7.0
[ 1738.287] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1738.288] (--) PCI:*(0:0:2:0) 8086:0166:1b0a:20c5 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 1738.289] Initializing built-in extension Generic Event Extension
[ 1738.289] Initializing built-in extension SHAPE
[ 1738.290] Initializing built-in extension MIT-SHM
[ 1738.291] Initializing built-in extension XInputExtension
[ 1738.292] Initializing built-in extension XTEST
[ 1738.292] Initializing built-in extension BIG-REQUESTS
[ 1738.293] Initializing built-in extension SYNC
[ 1738.294] Initializing built-in extension XKEYBOARD
[ 1738.294] Initializing built-in extension XC-MISC
[ 1738.295] Initializing built-in extension SECURITY
[ 1738.296] Initializing built-in extension XINERAMA
[ 1738.296] Initializing built-in extension XFIXES
[ 1738.297] Initializing built-in extension RENDER
[ 1738.298] Initializing built-in extension RANDR
[ 1738.298] Initializing built-in extension COMPOSITE
[ 1738.299] Initializing built-in extension DAMAGE
[ 1738.300] Initializing built-in extension MIT-SCREEN-SAVER
[ 1738.300] Initializing built-in extension DOUBLE-BUFFER
[ 1738.301] Initializing built-in extension RECORD
[ 1738.301] Initializing built-in extension DPMS
[ 1738.302] Initializing built-in extension X-Resource
[ 1738.303] Initializing built-in extension XVideo
[ 1738.303] Initializing built-in extension XVideo-MotionCompensation
[ 1738.304] Initializing built-in extension XFree86-VidModeExtension
[ 1738.304] Initializing built-in extension XFree86-DGA
[ 1738.305] Initializing built-in extension XFree86-DRI
[ 1738.305] Initializing built-in extension DRI2
[ 1738.305] (II) LoadModule: "glx"
[ 1738.305] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1738.305] (II) Module glx: vendor="X.Org Foundation"
[ 1738.305] compiled for 1.14.2, module version = 1.0.0
[ 1738.305] ABI class: X.Org Server Extension, version 7.0
[ 1738.305] (==) AIGLX enabled
[ 1738.306] Loading extension GLX
[ 1738.306] (==) Matched intel as autoconfigured driver 0
[ 1738.306] (==) Matched intel as autoconfigured driver 1
[ 1738.306] (==) Matched vesa as autoconfigured driver 2
[ 1738.306] (==) Matched modesetting as autoconfigured driver 3
[ 1738.306] (==) Matched fbdev as autoconfigured driver 4
[ 1738.306] (==) Assigned the driver to the xf86ConfigLayout
[ 1738.306] (II) LoadModule: "intel"
[ 1738.306] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1738.306] (II) Module intel: vendor="X.Org Foundation"
[ 1738.306] compiled for 1.14.2, module version = 2.21.11
[ 1738.306] Module class: X.Org Video Driver
[ 1738.306] ABI class: X.Org Video Driver, version 14.1
[ 1738.306] (II) LoadModule: "vesa"
[ 1738.306] (WW) Warning, couldn't open module vesa
[ 1738.306] (II) UnloadModule: "vesa"
[ 1738.306] (II) Unloading vesa
[ 1738.306] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 1738.306] (II) LoadModule: "modesetting"
[ 1738.307] (WW) Warning, couldn't open module modesetting
[ 1738.307] (II) UnloadModule: "modesetting"
[ 1738.307] (II) Unloading modesetting
[ 1738.307] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 1738.307] (II) LoadModule: "fbdev"
[ 1738.307] (WW) Warning, couldn't open module fbdev
[ 1738.307] (II) UnloadModule: "fbdev"
[ 1738.307] (II) Unloading fbdev
[ 1738.307] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 1738.307] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 1738.307] (++) using VT number 1
[ 1738.307] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1738.307] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1738.307] (==) intel(0): RGB weight 888
[ 1738.307] (==) intel(0): Default visual is TrueColor
[ 1738.308] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 1738.308] (**) intel(0): Relaxed fencing enabled
[ 1738.308] (**) intel(0): Wait on SwapBuffers? enabled
[ 1738.308] (**) intel(0): Triple buffering? enabled
[ 1738.308] (**) intel(0): Framebuffer tiled
[ 1738.308] (**) intel(0): Pixmaps tiled
[ 1738.308] (**) intel(0): 3D buffers tiled
[ 1738.308] (**) intel(0): SwapBuffers wait enabled
[ 1738.308] (==) intel(0): video overlay key set to 0x101fe
[ 1738.308] (II) intel(0): Output LVDS1 has no monitor section
[ 1738.308] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 1738.333] (II) intel(0): Output VGA1 has no monitor section
[ 1738.333] (II) intel(0): Output HDMI1 has no monitor section
[ 1738.333] (II) intel(0): Output DP1 has no monitor section
[ 1738.333] (II) intel(0): EDID for output LVDS1
[ 1738.333] (II) intel(0): Manufacturer: IVO Model: 579 Serial#: 1
[ 1738.333] (II) intel(0): Year: 2009 Week: 49
[ 1738.333] (II) intel(0): EDID Version: 1.3
[ 1738.333] (II) intel(0): Digital Display Input
[ 1738.333] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 1738.333] (II) intel(0): Gamma: 2.20
[ 1738.333] (II) intel(0): No DPMS capabilities specified
[ 1738.333] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1738.333] (II) intel(0): First detailed timing is preferred mode
[ 1738.333] (II) intel(0): redX: 0.587 redY: 0.349 greenX: 0.337 greenY: 0.564
[ 1738.333] (II) intel(0): blueX: 0.152 blueY: 0.109 whiteX: 0.312 whiteY: 0.328
[ 1738.333] (II) intel(0): Manufacturer's mask: 0
[ 1738.333] (II) intel(0): Supported detailed timing:
[ 1738.333] (II) intel(0): clock: 74.9 MHz Image Size: 309 x 174 mm
[ 1738.333] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1548 h_border: 0
[ 1738.333] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 783 v_blanking: 806 v_border: 0
[ 1738.333] (II) intel(0): Unknown vendor-specific block 0
[ 1738.333] (II) intel(0): InfoVision
[ 1738.333] (II) intel(0): M140NWR1 R0
[ 1738.333] (II) intel(0): EDID (in hex):
[ 1738.333] (II) intel(0): 00ffffffffffff0026cf790501000000
[ 1738.333] (II) intel(0): 31130103801f11780a56009659569027
[ 1738.333] (II) intel(0): 1c505400000001010101010101010101
[ 1738.333] (II) intel(0): 0101010101013e1d56b6500026303020
[ 1738.333] (II) intel(0): 3c0035ae1000001900000f0000000000
[ 1738.333] (II) intel(0): 00000000000000000001000000fe0049
[ 1738.333] (II) intel(0): 6e666f566973696f6e0a2020000000fe
[ 1738.333] (II) intel(0): 004d3134304e5752312052300a200021
[ 1738.333] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Printing probed modes for output LVDS1
[ 1738.333] (II) intel(0): Modeline "1366x768"x60.0 74.86 1366 1414 1446 1548 768 771 783 806 -hsync -vsync (48.4 kHz eP)
[ 1738.334] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 1738.334] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 1738.334] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 1738.334] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 1738.359] (II) intel(0): EDID for output VGA1
[ 1738.360] (II) intel(0): EDID for output HDMI1
[ 1738.360] (II) intel(0): EDID for output DP1
[ 1738.360] (II) intel(0): Output LVDS1 connected
[ 1738.360] (II) intel(0): Output VGA1 disconnected
[ 1738.360] (II) intel(0): Output HDMI1 disconnected
[ 1738.360] (II) intel(0): Output DP1 disconnected
[ 1738.360] (II) intel(0): Using exact sizes for initial modes
[ 1738.360] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 1738.360] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1738.360] (II) intel(0): Kernel page flipping support detected, enabling
[ 1738.360] (==) intel(0): DPI set to (96, 96)
[ 1738.360] (II) Loading sub module "fb"
[ 1738.360] (II) LoadModule: "fb"
[ 1738.360] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1738.360] (II) Module fb: vendor="X.Org Foundation"
[ 1738.360] compiled for 1.14.2, module version = 1.0.0
[ 1738.360] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1738.360] (II) Loading sub module "dri2"
[ 1738.360] (II) LoadModule: "dri2"
[ 1738.360] (II) Module "dri2" already built-in
[ 1738.360] (==) Depth 24 pixmap format is 32 bpp
[ 1738.360] (II) intel(0): [DRI2] Setup complete
[ 1738.360] (II) intel(0): [DRI2] DRI driver: i965
[ 1738.360] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 1738.361] (II) UXA(0): Driver registered support for the following operations:
[ 1738.361] (II) solid
[ 1738.361] (II) copy
[ 1738.361] (II) composite (RENDER acceleration)
[ 1738.361] (II) put_image
[ 1738.361] (II) get_image
[ 1738.361] (==) intel(0): Backing store disabled
[ 1738.361] (==) intel(0): Silken mouse enabled
[ 1738.361] (II) intel(0): Initializing HW Cursor
[ 1738.361] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1738.362] (==) intel(0): DPMS enabled
[ 1738.362] (==) intel(0): Intel XvMC decoder enabled
[ 1738.362] (II) intel(0): Set up textured video
[ 1738.362] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 1738.362] (II) intel(0): direct rendering: DRI2 Enabled
[ 1738.362] (==) intel(0): hotplug detection: "enabled"
[ 1738.376] (--) RandR disabled
[ 1738.390] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1738.390] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1738.390] (II) AIGLX: enabled GLX_ARB_create_context
[ 1738.390] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1738.390] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 1738.390] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1738.390] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1738.390] (II) AIGLX: Loaded and initialized i965
[ 1738.390] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1738.390] (II) intel(0): Setting screen physical size to 361 x 203
[ 1738.393] [dix] Could not init font path element /usr/share/fonts/TTF/, removing from list!
[ 1738.429] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 1738.429] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1738.429] (II) LoadModule: "evdev"
[ 1738.430] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1738.430] (II) Module evdev: vendor="X.Org Foundation"
[ 1738.430] compiled for 1.14.0, module version = 2.8.0
[ 1738.430] Module class: X.Org XInput Driver
[ 1738.430] ABI class: X.Org XInput driver, version 19.1
[ 1738.430] (II) Using input driver 'evdev' for 'Power Button'
[ 1738.430] (**) Power Button: always reports core events
[ 1738.430] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 1738.430] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1738.430] (--) evdev: Power Button: Found keys
[ 1738.430] (II) evdev: Power Button: Configuring as keyboard
[ 1738.430] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 1738.430] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1738.431] (**) Option "xkb_rules" "evdev"
[ 1738.431] (**) Option "xkb_model" "evdev"
[ 1738.431] (**) Option "xkb_layout" "us"
[ 1738.467] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 1738.467] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1738.467] (II) Using input driver 'evdev' for 'Video Bus'
[ 1738.467] (**) Video Bus: always reports core events
[ 1738.467] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 1738.467] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 1738.467] (--) evdev: Video Bus: Found keys
[ 1738.467] (II) evdev: Video Bus: Configuring as keyboard
[ 1738.467] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10/event10"
[ 1738.467] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 1738.467] (**) Option "xkb_rules" "evdev"
[ 1738.467] (**) Option "xkb_model" "evdev"
[ 1738.467] (**) Option "xkb_layout" "us"
[ 1738.468] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 1738.468] (II) No input driver specified, ignoring this device.
[ 1738.468] (II) This device may have been added with another device file.
[ 1738.469] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 1738.469] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 1738.469] (II) Using input driver 'evdev' for 'Sleep Button'
[ 1738.469] (**) Sleep Button: always reports core events
[ 1738.469] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 1738.469] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 1738.469] (--) evdev: Sleep Button: Found keys
[ 1738.469] (II) evdev: Sleep Button: Configuring as keyboard
[ 1738.469] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
[ 1738.469] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 1738.469] (**) Option "xkb_rules" "evdev"
[ 1738.469] (**) Option "xkb_model" "evdev"
[ 1738.469] (**) Option "xkb_layout" "us"
[ 1738.470] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1738.470] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event8)
[ 1738.470] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 1738.470] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[ 1738.471] (**) USB 2.0 Camera: always reports core events
[ 1738.471] (**) evdev: USB 2.0 Camera: Device: "/dev/input/event8"
[ 1738.471] (--) evdev: USB 2.0 Camera: Vendor 0xc45 Product 0x6457
[ 1738.471] (--) evdev: USB 2.0 Camera: Found keys
[ 1738.471] (II) evdev: USB 2.0 Camera: Configuring as keyboard
[ 1738.471] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input8/event8"
[ 1738.471] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 9)
[ 1738.471] (**) Option "xkb_rules" "evdev"
[ 1738.471] (**) Option "xkb_model" "evdev"
[ 1738.471] (**) Option "xkb_layout" "us"
[ 1738.472] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
[ 1738.472] (II) No input driver specified, ignoring this device.
[ 1738.472] (II) This device may have been added with another device file.
[ 1738.472] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[ 1738.472] (II) No input driver specified, ignoring this device.
[ 1738.472] (II) This device may have been added with another device file.
[ 1738.473] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 1738.473] (II) No input driver specified, ignoring this device.
[ 1738.473] (II) This device may have been added with another device file.
[ 1738.473] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1738.473] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1738.473] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1738.473] (**) AT Translated Set 2 keyboard: always reports core events
[ 1738.473] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1738.473] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 1738.473] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 1738.473] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 1738.474] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1738.474] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 1738.474] (**) Option "xkb_rules" "evdev"
[ 1738.474] (**) Option "xkb_model" "evdev"
[ 1738.474] (**) Option "xkb_layout" "us"
[ 1738.475] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 1738.475] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 1738.475] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 1738.475] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 1738.475] (II) LoadModule: "synaptics"
[ 1738.475] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 1738.475] (II) Module synaptics: vendor="X.Org Foundation"
[ 1738.475] compiled for 1.14.1, module version = 1.7.1
[ 1738.475] Module class: X.Org XInput Driver
[ 1738.475] ABI class: X.Org XInput driver, version 19.1
[ 1738.475] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 1738.475] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1738.475] (**) Option "Device" "/dev/input/event9"
[ 1738.480] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 1738.480] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5634 (res 51)
[ 1738.480] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4598 (res 76)
[ 1738.480] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 1738.480] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 1738.480] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 1738.480] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 1738.480] (**) Option "TapButton1" "1"
[ 1738.480] (**) Option "TapButton2" "2"
[ 1738.480] (**) Option "TapButton3" "3"
[ 1738.480] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 1738.480] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1738.481] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input9/event9"
[ 1738.481] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 1738.481] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 1738.481] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 1738.481] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038
[ 1738.481] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 1738.482] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 1738.482] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 1738.482] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 1738.482] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 1738.483] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 1738.483] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 1738.483] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 1738.483] (II) No input driver specified, ignoring this device.
[ 1738.483] (II) This device may have been added with another device file.
[ 1738.528] (II) UnloadModule: "synaptics"
[ 1738.528] (II) evdev: AT Translated Set 2 keyboard: Close
[ 1738.528] (II) UnloadModule: "evdev"
[ 1738.528] (II) evdev: USB 2.0 Camera: Close
[ 1738.528] (II) UnloadModule: "evdev"
[ 1738.528] (II) evdev: Sleep Button: Close
[ 1738.528] (II) UnloadModule: "evdev"
[ 1738.528] (II) evdev: Video Bus: Close
[ 1738.528] (II) UnloadModule: "evdev"
[ 1738.528] (II) evdev: Power Button: Close
[ 1738.528] (II) UnloadModule: "evdev"
[ 1739.340] (EE) Server terminated successfully (0). Closing log file.
Moderator Edit: Added code tags[ -- ewaller
Last edited by ewaller (2013-07-06 00:49:24)
Similar Messages
-
Hi:
I have a J2EE application using Connection Pool and JDBC.
I am using Weblogic 6.1 and JDK 1.3.1.
I am running into a 'No More Resource' problem. I did some debugging and think the cause is due to all my 80 database connections are used up so no new connection is available. But all the 80 connections shouldn't be used up because I did the statement.close() and rs.close() in the finally{} statement in all my DAO methods. But it seems like the connections are not released back to the free pool.
I thought I read something that I might need to do a conn.close() too in order for the connections to be returned to the pool and marked as available. Don't the statement.close() do that? Thanks for any help!
StellaAny resolution on this? We're getting the same problem - using weblogic 6.1 and jdk131. We should never reach the max # of connections specified in the pool but periodically we do. Scraped through all the code and confirmed that for every connection we call ResultSet.close; Statement.close; Connection.Close in the finally block of the try/catch statements. But we still periodically reach the max. It's sporadic so we can't reproduce. Also, after we get the error and we check the weblogic console, we see the # of active connections drop back down below the max capacity (we have shrinking turned on). Any ideas?
thx.
--S. -
As jato2 still doesn't know about some HTML4 tags like <label>
ex:
<label><input type="radio" ... />TheLabel</label>
if you click on "TheLabel", it clicks on the radio button, like every
other GUI
I thought I would be able use the <label for=""> as a workaround
<input type="radio" name="choice" id="choice1" /> <label
for="choice1">TheLabel</label>
BUT despite it generates several tags, <jato:radioButtons> sets the id
attribute to the same value for every tag :< This not only defeats my
workaround but also id main purpose to uniquely identity elements.
We really need a generic mechanism to specify attributes when jato tags
generate multiple HTML tags.
I can still change the generated tags in endDisplay but it be neat if
the 201 taglib was a little bit more XHTML compliant and savvy ;)
Fr?d?ric
ps: release this part of the source code and we'll do it !Give me until monday and I'll have what you "ask" for (WML/XHTML
Basic/Mobile as well as ViewBean).
Following Todd advices,
for the former, I am having new tags to render the same components. I
may need to write new components but I'm not sure yet.
for the latter, 1 pagelet per "rendering" type with an inner
ContainerView when the logic is different ; the pagelet tags being
surrounded by a homemade tag that "activates" the pagelet based on the
client type. A specialized tag seems better than <jato:content> as the
logic is wired.
Further step would be to make the tags client aware but I'm not sure
yet it is the right thing to do. Are tags "allowed" to store data in
the session (to avoid computing client type ever and ever) ?
Fr?d?ric
PS: James Baty will confirm I'm not cheap ;?)
On mercredi, nov 13, 2002, at 21:11 Europe/Paris, Craig V. Conover
wrote:
Fr?d?ric
Is there anyway that we could talk with you about your WML efforts with
JATO?
I would love to get a sample WML app to show the world. And then have a
WML/HTML app to show multiple clients using the same ViewBeans.
craig
Fr?d?ric Miserey wrote:
On mercredi, nov 13, 2002, at 13:34 Europe/Paris, Todd Fast wrote:
Fr?d?ric--
Thanks for the info; I will look into a way of doing something
about
this.
However, please keep in mind that you can write your own complementary
tags
to render JATO components any way you like (or write JATO components
that
render themselves any way you like), and this is expected to be a
normal, if
infrequent, part of writing JATO 2.0 components.That's what I'm doing right now for the WML tags. But I was planning on
using the standard tags for mainstream HTML ;)
May you elaborate a little bit on complementary tags vs components ?
(first part of the suggested thread.
Until the 2.0 taglib is documented, you can use the 1.2.1 JATO
source
to
guide this effort.? It's actually pretty easy, but you will need the
source
to guide you without docs to that effect.? You can download the JATO
1.2.1
source, free of charge, etc. here:
???? http://iplanet.com/downloads/developer/5102.html
(If that doesn't work, just do a search for "JATO" on sun.com).? We
can also
start a tag-writing thread here if you like.
I would love to get your perspective on any XHTML shortcomings of the
current tag library.? Can you plase send your thoughts, list of
issues, etc.
to jatoteam@e...?you don't know what you've just asked ;)
Todd
----- Original Message -----
From: "Fr?d?ric Miserey" <frederic@n...>
Sent: Tuesday, November 12, 2002 8:35 AM
Subject: [SunONE-JATO] yet more TagLibs problems
As jato2 still doesn't know about some HTML4 tags like <label>
ex:
<label><input type="radio" ... />TheLabel</label>
if you click on "TheLabel", it clicks on the radio button, like
every
other GUI
I thought I would be able use the <label for="">? as a workaround
<input type="radio" name="choice" id="choice1" /> <label
for="choice1">TheLabel</label>
BUT despite it generates several tags, <jato:radioButtons> sets the id
attribute to the same value for every tag :< This not only defeats my
workaround but also id main purpose to uniquely identity elements.
We really need a generic mechanism to specify attributes when jato tags
generate multiple HTML tags.
I can still change the generated tags in endDisplay but it be neat if
the 201 taglib was a little bit more XHTML compliant and savvy ;)
Fr?d?ric
ps: release this part of the source code and we'll do it !
[Non-text portions of this message have been removed] -
KDE starting but not showing (and more KDE errors)
Hi!
Yesterday I had a problem with an upgrade and I found the problem was libdbusmenu.
The solution I foun on the internet was
sudo pacman -Rdd libdbusmenu && sudo pacman -Syu
so I did it
The problem is that now, after rebooting I can't start KDE (or at least it doesn't appear):
$ startkde
KDE seems to be already running on this display.
I can't start any KDE app, for example opening settings results in a window saying
System Settings was unable to find any views, and hence has nothing to display.
Also the keyboard layout has changed for example
Everytime I run something in terminal related with pacman or yaourt I get this error:
missing 'libdbusmenu' dependency for 'lightread'
I've uninstalled lightread and the error does not appear any more but I'm still the same
Tried rebooting and starting fallback but still the same
Any solution?
Working on 3.14.1-1-ARCH
Any further information needed please, ask for it
I would be very pleased if you could help me to solve this as I don't have any idea how to proceed.
I tried installing again libdbusmenu from AUR but it doesn't exist now
Thanks!Andy_Crowd wrote:
Sometimes it can be a problem with user settings, to test it just create a new user, login with it and try to start KDE.
It is few ways to start a desktop environment.
I am using few desktop managers and using a command line to start them depends on which I want to use. I don't use a GUI login managers.
For KDE you can try
killall startkd
killall X
startx /usr/bin/startkde
For my openbox for example
# For a normal start
startx /usr/bin/openbox-session
# For a failsafe start
startx /usr/bin/openbox
Of course you can make aliases for them.
I hope this might help.
It seems we're getting closer to the problem.
Starting with
sudo startx /usr/bin/startkde
makes KDE start correctly while starting with
startx /usr/bin/startkde
makes it start the wrong way.
Could it be possibly be a configuration error right?
This is the output of my ~/.xsession-errors if it could help:
^[]0;localhost:/home/emilio^Gcat: /proc/1050/comm: No such file or directory
startkde: Starting up...
klauncher(1033) kdemain: No DBUS session-bus found. Check if you have started the DBUS server$
kdeinit4: Communication error with launcher. Exiting!
This is cat /var/log/Xorg.0.log
[ 82.667]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 82.667] X Protocol Version 11, Revision 0
[ 82.667] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 82.667] Current Operating System: Linux work_group 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64
[ 82.667] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda5 rw init=/usr/lib/systemd/systemd fastboot acpi_enforce_resources=lax initrd=../initramfs-linux.img
[ 82.667] Build Date: 14 April 2014 08:39:09AM
[ 82.667]
[ 82.667] Current version of pixman: 0.32.4
[ 82.667] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 82.667] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 82.668] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 27 11:45:41 2014
[ 82.668] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 82.668] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 82.668] (==) No Layout section. Using the first Screen section.
[ 82.668] (==) No screen section available. Using defaults.
[ 82.668] (**) |-->Screen "Default Screen Section" (0)
[ 82.668] (**) | |-->Monitor "<default monitor>"
[ 82.668] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 82.668] (==) Automatically adding devices
[ 82.668] (==) Automatically enabling devices
[ 82.668] (==) Automatically adding GPU devices
[ 82.668] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 82.668] Entry deleted from font path.
[ 82.668] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 82.668] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 82.668] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 82.668] (II) Loader magic: 0x804c80
[ 82.668] (II) Module ABI versions:
[ 82.668] X.Org ANSI C Emulation: 0.4
[ 82.668] X.Org Video Driver: 15.0
[ 82.668] X.Org XInput driver : 20.0
[ 82.668] X.Org Server Extension : 8.0
[ 82.669] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 82.671] (--) PCI:*(0:1:0:0) 1002:7142:1002:3000 rev 0, Mem @ 0xe0000000/268435456, 0xfeae0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 82.671] (--) PCI: (0:1:0:1) 1002:7162:1002:3001 rev 0, Mem @ 0xfeaf0000/65536
[ 82.671] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 82.671] Initializing built-in extension Generic Event Extension
[ 82.671] Initializing built-in extension SHAPE
[ 82.671] Initializing built-in extension MIT-SHM
[ 82.671] Initializing built-in extension XInputExtension
[ 82.671] Initializing built-in extension XTEST
[ 82.671] Initializing built-in extension BIG-REQUESTS
[ 82.671] Initializing built-in extension SYNC
[ 82.671] Initializing built-in extension XKEYBOARD
[ 82.671] Initializing built-in extension XC-MISC
[ 82.671] Initializing built-in extension SECURITY
[ 82.671] Initializing built-in extension XINERAMA
[ 82.671] Initializing built-in extension XFIXES
[ 82.671] Initializing built-in extension RENDER
[ 82.671] Initializing built-in extension RANDR
[ 82.671] Initializing built-in extension COMPOSITE
[ 82.671] Initializing built-in extension DAMAGE
[ 82.671] Initializing built-in extension MIT-SCREEN-SAVER
[ 82.671] Initializing built-in extension DOUBLE-BUFFER
[ 82.671] Initializing built-in extension RECORD
[ 82.671] Initializing built-in extension DPMS
[ 82.671] Initializing built-in extension Present
[ 82.671] Initializing built-in extension DRI3
[ 82.671] Initializing built-in extension X-Resource
[ 82.671] Initializing built-in extension XVideo
[ 82.671] Initializing built-in extension XVideo-MotionCompensation
[ 82.671] Initializing built-in extension XFree86-VidModeExtension
[ 82.671] Initializing built-in extension XFree86-DGA
[ 82.671] Initializing built-in extension XFree86-DRI
[ 82.671] Initializing built-in extension DRI2
[ 82.671] (II) "glx" will be loaded by default.
[ 82.671] (II) LoadModule: "dri2"
[ 82.671] (II) Module "dri2" already built-in
[ 82.671] (II) LoadModule: "glamoregl"
[ 82.671] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 82.674] (II) Module glamoregl: vendor="X.Org Foundation"
[ 82.674] compiled for 1.15.0, module version = 0.6.0
[ 82.674] ABI class: X.Org ANSI C Emulation, version 0.4
[ 82.674] (II) LoadModule: "glx"
[ 82.674] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 82.674] (II) Module glx: vendor="X.Org Foundation"
[ 82.674] compiled for 1.15.1, module version = 1.0.0
[ 82.674] ABI class: X.Org Server Extension, version 8.0
[ 82.674] (==) AIGLX enabled
[ 82.674] Loading extension GLX
[ 82.674] (==) Matched ati as autoconfigured driver 0
[ 82.674] (==) Matched ati as autoconfigured driver 1
[ 82.674] (==) Matched modesetting as autoconfigured driver 2
[ 82.674] (==) Matched fbdev as autoconfigured driver 3
[ 82.674] (==) Matched vesa as autoconfigured driver 4
[ 82.674] (==) Assigned the driver to the xf86ConfigLayout
[ 82.674] (II) LoadModule: "ati"
[ 82.674] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 82.674] (II) Module ati: vendor="X.Org Foundation"
[ 82.674] compiled for 1.15.0, module version = 7.3.0
[ 82.674] Module class: X.Org Video Driver
[ 82.674] ABI class: X.Org Video Driver, version 15.0
[ 82.674] (II) LoadModule: "radeon"
[ 82.674] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 82.675] (II) Module radeon: vendor="X.Org Foundation"
[ 82.675] compiled for 1.15.0, module version = 7.3.0
[ 82.675] Module class: X.Org Video Driver
[ 82.675] ABI class: X.Org Video Driver, version 15.0
[ 82.675] (II) LoadModule: "modesetting"
[ 82.675] (WW) Warning, couldn't open module modesetting
[ 82.675] (II) UnloadModule: "modesetting"
[ 82.675] (II) Unloading modesetting
[ 82.675] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 82.675] (II) LoadModule: "fbdev"
[ 82.675] (WW) Warning, couldn't open module fbdev
[ 82.675] (II) UnloadModule: "fbdev"
[ 82.675] (II) Unloading fbdev
[ 82.675] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 82.675] (II) LoadModule: "vesa"
[ 82.675] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 82.675] (II) Module vesa: vendor="X.Org Foundation"
[ 82.675] compiled for 1.15.0, module version = 2.3.2
[ 82.675] Module class: X.Org Video Driver
[ 82.675] ABI class: X.Org Video Driver, version 15.0
[ 82.675] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII
[ 82.683] (II) VESA: driver for VESA chipsets: vesa
[ 82.683] (++) using VT number 7
[ 82.686] (II) [KMS] Kernel modesetting enabled.
[ 82.686] (WW) Falling back to old probe method for vesa
[ 82.686] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 82.686] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 82.686] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 82.686] (==) RADEON(0): Default visual is TrueColor
[ 82.686] (==) RADEON(0): RGB weight 888
[ 82.686] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 82.686] (--) RADEON(0): Chipset: "ATI Radeon X1300/X1550" (ChipID = 0x7142)
[ 82.687] (II) Loading sub module "dri2"
[ 82.687] (II) LoadModule: "dri2"
[ 82.687] (II) Module "dri2" already built-in
[ 82.687] (II) Loading sub module "exa"
[ 82.687] (II) LoadModule: "exa"
[ 82.687] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 82.687] (II) Module exa: vendor="X.Org Foundation"
[ 82.687] compiled for 1.15.1, module version = 2.6.0
[ 82.687] ABI class: X.Org Video Driver, version 15.0
[ 82.687] (II) RADEON(0): KMS Color Tiling: enabled
[ 82.687] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 82.687] (II) RADEON(0): KMS Pageflipping: enabled
[ 82.687] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 82.717] (II) RADEON(0): Output DVI-0 has no monitor section
[ 82.783] (II) RADEON(0): Output S-video has no monitor section
[ 82.850] (II) RADEON(0): Output DVI-1 has no monitor section
[ 82.880] (II) RADEON(0): EDID for output DVI-0
[ 82.880] (II) RADEON(0): Manufacturer: HWP Model: 2840 Serial#: 16843009
[ 82.880] (II) RADEON(0): Year: 2009 Week: 27
[ 82.880] (II) RADEON(0): EDID Version: 1.3
[ 82.880] (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 82.880] (II) RADEON(0): Sync: Separate
[ 82.880] (II) RADEON(0): Max Image Size [cm]: horiz.: 41 vert.: 23
[ 82.880] (II) RADEON(0): Gamma: 2.20
[ 82.880] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 82.880] (II) RADEON(0): Default color space is primary color space
[ 82.880] (II) RADEON(0): First detailed timing is preferred mode
[ 82.880] (II) RADEON(0): redX: 0.646 redY: 0.334 greenX: 0.284 greenY: 0.602
[ 82.880] (II) RADEON(0): blueX: 0.152 blueY: 0.076 whiteX: 0.313 whiteY: 0.329
[ 82.880] (II) RADEON(0): Supported established timings:
[ 82.880] (II) RADEON(0): 720x400@70Hz
[ 82.880] (II) RADEON(0): 640x480@60Hz
[ 82.880] (II) RADEON(0): 800x600@60Hz
[ 82.880] (II) RADEON(0): 1024x768@60Hz
[ 82.880] (II) RADEON(0): Manufacturer's mask: 0
[ 82.880] (II) RADEON(0): Supported standard timings:
[ 82.880] (II) RADEON(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 82.880] (II) RADEON(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 82.880] (II) RADEON(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 82.880] (II) RADEON(0): Supported detailed timing:
[ 82.880] (II) RADEON(0): clock: 85.5 MHz Image Size: 413 x 234 mm
[ 82.880] (II) RADEON(0): h_active: 1366 h_sync: 1436 h_sync_end 1579 h_blank_end 1792 h_border: 0
[ 82.880] (II) RADEON(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 798 v_border: 0
[ 82.880] (II) RADEON(0): Ranges: V min: 48 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 145 MHz
[ 82.880] (II) RADEON(0): Monitor name: HP LE1851w
[ 82.880] (II) RADEON(0): Serial No: CNC927PFP1
[ 82.880] (II) RADEON(0): EDID (in hex):
[ 82.880] (II) RADEON(0): 00ffffffffffff0022f0402801010101
[ 82.880] (II) RADEON(0): 1b13010368291778ee6c25a555489a27
[ 82.880] (II) RADEON(0): 135054a1080081c08140818001010101
[ 82.880] (II) RADEON(0): 010101010101662156aa51001e30468f
[ 82.880] (II) RADEON(0): 33009dea1000001e000000fd00304c18
[ 82.880] (II) RADEON(0): 530e000a202020202020000000fc0048
[ 82.880] (II) RADEON(0): 50204c4531383531770a2020000000ff
[ 82.880] (II) RADEON(0): 00434e43393237504650310a202000fd
[ 82.880] (II) RADEON(0): Printing probed modes for output DVI-0
[ 82.880] (II) RADEON(0): Modeline "1366x768"x59.8 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 82.881] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 82.881] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 82.881] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 82.881] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 82.881] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 82.881] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 82.881] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 82.946] (II) RADEON(0): EDID for output S-video
[ 83.013] (II) RADEON(0): EDID for output DVI-1
[ 83.013] (II) RADEON(0): Output DVI-0 connected
[ 83.013] (II) RADEON(0): Output S-video disconnected
[ 83.013] (II) RADEON(0): Output DVI-1 disconnected
[ 83.013] (II) RADEON(0): Using exact sizes for initial modes
[ 83.013] (II) RADEON(0): Output DVI-0 using initial mode 1366x768
[ 83.013] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 83.013] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:20000000 visible:1fba0000
[ 83.013] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 83.013] (==) RADEON(0): DPI set to (96, 96)
[ 83.013] (II) Loading sub module "fb"
[ 83.013] (II) LoadModule: "fb"
[ 83.013] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 83.014] (II) Module fb: vendor="X.Org Foundation"
[ 83.014] compiled for 1.15.1, module version = 1.0.0
[ 83.014] ABI class: X.Org ANSI C Emulation, version 0.4
[ 83.014] (II) Loading sub module "ramdac"
[ 83.014] (II) LoadModule: "ramdac"
[ 83.014] (II) Module "ramdac" already built-in
[ 83.014] (II) UnloadModule: "vesa"
[ 83.014] (II) Unloading vesa
[ 83.014] (--) Depth 24 pixmap format is 32 bpp
[ 83.014] (II) RADEON(0): [DRI2] Setup complete
[ 83.014] (II) RADEON(0): [DRI2] DRI driver: r300
[ 83.014] (II) RADEON(0): [DRI2] VDPAU driver: r300
[ 83.014] (II) RADEON(0): Front buffer size: 4224K
[ 83.014] (II) RADEON(0): VRAM usage limit set to 463996K
[ 83.014] (==) RADEON(0): Backing store enabled
[ 83.014] (II) RADEON(0): Direct rendering enabled
[ 83.014] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[ 83.014] (II) EXA(0): Driver allocated offscreen pixmaps
[ 83.014] (II) EXA(0): Driver registered support for the following operations:
[ 83.014] (II) Solid
[ 83.014] (II) Copy
[ 83.014] (II) Composite (RENDER acceleration)
[ 83.014] (II) UploadToScreen
[ 83.014] (II) DownloadFromScreen
[ 83.014] (II) RADEON(0): Acceleration enabled
[ 83.014] (==) RADEON(0): DPMS enabled
[ 83.014] (==) RADEON(0): Silken mouse enabled
[ 83.015] (II) RADEON(0): Set up textured video
[ 83.015] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 83.015] (II) RADEON(0): [XvMC] Extension initialized.
[ 83.015] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 83.015] (--) RandR disabled
[ 83.040] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 83.040] (II) AIGLX: enabled GLX_ARB_create_context
[ 83.040] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 83.040] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 83.040] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 83.040] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 83.040] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 83.040] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 83.040] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 83.040] (II) AIGLX: Loaded and initialized r300
[ 83.040] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 83.041] (II) RADEON(0): Setting screen physical size to 361 x 203
[ 83.146] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 83.146] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 83.146] (II) LoadModule: "evdev"
[ 83.146] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 83.146] (II) Module evdev: vendor="X.Org Foundation"
[ 83.146] compiled for 1.15.0, module version = 2.8.2
[ 83.146] Module class: X.Org XInput Driver
[ 83.146] ABI class: X.Org XInput driver, version 20.0
[ 83.146] (II) Using input driver 'evdev' for 'Power Button'
[ 83.146] (**) Power Button: always reports core events
[ 83.146] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 83.146] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 83.146] (--) evdev: Power Button: Found keys
[ 83.146] (II) evdev: Power Button: Configuring as keyboard
[ 83.146] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[ 83.146] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 83.146] (**) Option "xkb_rules" "evdev"
[ 83.146] (**) Option "xkb_model" "pc104"
[ 83.146] (**) Option "xkb_layout" "us"
[ 83.191] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 83.191] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 83.191] (II) Using input driver 'evdev' for 'Power Button'
[ 83.191] (**) Power Button: always reports core events
[ 83.191] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 83.191] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 83.191] (--) evdev: Power Button: Found keys
[ 83.191] (II) evdev: Power Button: Configuring as keyboard
[ 83.191] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
[ 83.191] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 83.191] (**) Option "xkb_rules" "evdev"
[ 83.191] (**) Option "xkb_model" "pc104"
[ 83.191] (**) Option "xkb_layout" "us"
[ 83.191] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 83.192] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event3)
[ 83.192] (II) No input driver specified, ignoring this device.
[ 83.192] (II) This device may have been added with another device file.
[ 83.192] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7)
[ 83.193] (II) No input driver specified, ignoring this device.
[ 83.193] (II) This device may have been added with another device file.
[ 83.193] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[ 83.193] (II) No input driver specified, ignoring this device.
[ 83.193] (II) This device may have been added with another device file.
[ 83.193] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event5)
[ 83.193] (II) No input driver specified, ignoring this device.
[ 83.193] (II) This device may have been added with another device file.
[ 83.194] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event4)
[ 83.194] (II) No input driver specified, ignoring this device.
[ 83.194] (II) This device may have been added with another device file.
[ 83.194] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event8)
[ 83.194] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 83.194] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 83.194] (**) Logitech USB Receiver: always reports core events
[ 83.194] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event8"
[ 83.194] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[ 83.194] (--) evdev: Logitech USB Receiver: Found keys
[ 83.194] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 83.194] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/0003:046D:C52E.0001/input/input11/event8"
[ 83.194] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 8)
[ 83.194] (**) Option "xkb_rules" "evdev"
[ 83.194] (**) Option "xkb_model" "pc104"
[ 83.194] (**) Option "xkb_layout" "us"
[ 83.195] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event9)
[ 83.195] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 83.195] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 83.195] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 83.195] (**) Logitech USB Receiver: always reports core events
[ 83.195] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event9"
[ 83.195] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[ 83.195] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 83.195] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 83.195] (--) evdev: Logitech USB Receiver: Found relative axes
[ 83.195] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 83.195] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 83.195] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 83.195] (--) evdev: Logitech USB Receiver: Found keys
[ 83.195] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 83.195] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 83.195] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 83.195] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 83.195] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 83.195] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.1/0003:046D:C52E.0002/input/input12/event9"
[ 83.195] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 83.196] (**) Option "xkb_rules" "evdev"
[ 83.196] (**) Option "xkb_model" "pc104"
[ 83.196] (**) Option "xkb_layout" "us"
[ 83.196] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 83.196] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 83.196] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 83.196] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 83.196] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 83.196] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 83.197] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 83.197] (II) No input driver specified, ignoring this device.
[ 83.197] (II) This device may have been added with another device file.
[ 83.197] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 83.197] (II) No input driver specified, ignoring this device.
[ 83.197] (II) This device may have been added with another device file.
[ 84.996] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 296.326] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 296.367] (II) RADEON(0): EDID vendor "HWP", prod id 10304
[ 296.367] (II) RADEON(0): Using EDID range info for horizontal sync
[ 296.367] (II) RADEON(0): Using EDID range info for vertical refresh
[ 296.367] (II) RADEON(0): Printing DDC gathered Modelines:
[ 296.368] (II) RADEON(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[ 296.368] (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 296.368] (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 296.368] (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 296.368] (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 296.368] (II) RADEON(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 296.368] (II) RADEON(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 296.368] (II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 296.500] setversion 1.4 failed: Permission denied
[ 297.940] (II) AIGLX: Suspending AIGLX clients for VT switch
Any other helpfull log of something please ask for it
MORE INFO: Some apps, when starting cannot have a correct configuration (loading profiles for example) because they say there's a problem with permissions but don't know which of the files could have the wrong permissions
Last edited by eherranzr (2014-04-27 10:09:34) -
One more time - problems with fans
I realize this is but one of hundreds or possibly thousands of cases of Mac users being plagued by fan noise problems, but to me it has been a long and extremely frustrating saga. I have been a Mac user since the very beginning, through different versions of Macs and iMacs, and this is the first time I ever refer to a Macintosh as a "piece of junk."
I bought my iMac G5 in August 2005, a 20-inch ALS with 250 GB hard drive and 512 MB RAM. It worked perfectly until January this year, when all of sudden it shut down by itself. Freaked me out completely. Turned out to be power supply problem (EMC 2056) which Apple never informed me about.
I brought it to a repair shop that fixed the intermittent shut-down problem. I also added 1GB memory. But then the fans started to go berserk. Before the power supply problem, I only heard the fans whenever I used a large program like Photoshop. For the most part, it was a very quiet machine. After the power supply was replaced, within minutes of turning the iMac on, I could hear the fans spinning faster and faster, stabilizing at around 4400 rpm and did not stop spinning until I put the iMac to sleep or turned it off, regardless of CPU usage or software being used.
I checked the discussions at this forum (over 500 posts, no real answer) and did every "voodoo trick" suggested: I reset the SMU dozens of time, cleaned the inside of the iMac and around the fan area, did apple hardware test (everything was fine), monitored temperature and activity with XRG (average CPU at 160F, hard drive at 113F), cleaned out caches, tested for corrupt preferences, re-installed the original OS 10.4 (which only made the fans louder), upgraded it back to OS 10.4.9. I also removed the additional 1 GB memory, thinking it might be a bad piece. It didn't help.
Finally, I requested fan replacement from Apple and got them. I installed them last Sunday and now the problem is even worse! Within SECONDS of turning it on, the CPU T- Dio soars to around 170F, even while the machine is still stone cold to the touch. The hard drive temperature now averages at 117F, CPU fan is never below 4000 rpm (4400 rpm 98% of the time), even at 5-8% CPU usage.
The fans themselves are much quieter because they're brand new. But you can still hear the hums and whirs and it drives me nuts. More seriously, my iMac is now narcoleptic. If I use it too long (a few hours on a stretch) it will put itself to sleep, apparently because it thinks it is overheated. And when I use Photoshop or Illustrator, the awake time is even shorter. Depending on the outside temperature, at the most I can only use them for about an hour at a time. Two days ago we had heat wave, and even with the air conditioner running full blast in my study, the iMac kept falling asleep within minutes of using Illustrator.
Right now I am using TextEdit and no other program is running. Uptime is 59 minutes, average CPU 9.6%. CPU T-Dio is at 168.8F, hard drive 117.5F, CPU fan at 4400 rpm. I am out of ideas and before I do something drastic to this machine, if anyone knows what's going on with my iMac (I know every case is different), please help!
iMacG5 ECM 2056 Mac OS X (10.4.9) 20"/2.0GHz Power PC/1.5GB DDR SDRAM/250GB
iMacG5 ECM 2056 Mac OS X (10.4.9) 20"/2.0GHz Power PC/1.5GB DDR SDRAM/250GBI do not have the solution... but the same problem with a nice iMac G5 purchased in July 2005.
My Mac operated very silently untill 6 month ago;problem MAY ( I am not sure) have started when I upgraded to 10.4.10 ; even with few applications and low CPU usage (80% or more inactive), it seems that I have the following regrettable chain of events;
==> the CPU temperature is quite high ( 60°c to 72°c most of the time, ie 140-160 °F)
==> resulting in fan turning at high speed ( 2.000 for CPU and system, 2500 for HD), and changing speed all the time
==> resulting in a noisy computer
I am SURE this was not the case 6 month ago, and I suspect it is linked to my upgrade to 10.4.10.
I did all sorts of reinstall, authorization repair, SMU reset, fan clean-up with no sucess.
iMac G5 (2005) Mac OS X (10.4.10) POwerbook G4 Titanium (2001) -
Please Help! More Capturing Problems.
I'm having some trouble capturing footage from onto Final Cut Express HD.
Whenever I try to capture, the footage plays on my screen for about a second, freezes and I get this error message,
"Capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape. Capture has been aborted and you clip has been saved."
I am left with a five second clip from my tape for my trouble. This has only started happening recently, I am using the same setup that I have done before when it was working. I can capture with no issues on imovie.
I have called tech support and they sent me a link that shows how to reinstall final cut and delete all the user preference settings. I have tried different tapes, different sources for saving footage and I still have the exact same problem.
Any more info you need please ask. Please help me, I'm pulling my hair out!
Thanks!Well, I've captured before when the external drives have been connected, but I disconnected them and retried after resetting everything and I still get the same error.
I've also tried resetting the settings on my XHA1 and deleting all the preferences for final cut express, all the receipts etc. And reinstalling and still I get the same error.
I am shooting in HDV and have tried capturing with both 'HD down-conv' on and off, comp out is 1080i/576i (as it's always been). Set my FCE setting correctly? I've been through preferences and system settings, apart from selecting easy setup>DV-NTSC Firewire Basic and making sure there is space on capture scratch, anything else I need to look out for? -
[SOLVED] KDE problems after upgrade from 4.10.0-1 to 4.10.1-1
Hi guys, after updating KDE ihave the following problems:
1. The widgets are unable to load (red cross icon) everywhere at desktop, at panel.
2. Panel need to be removed and added after boot.
3. The programs does not displaying at task manager.
4. Programs can not executed from quiq launch (alt+F2).
I have try to downgrade from cache it but it not works for me ((
Full removing KDE using pacman -Rsc and reinstating also does not work ((
Last edited by S1Lv3R (2013-04-03 20:35:30)Inxsible wrote:are you fully updated ? or have you performed partial upgrade?
i not sure i have run the following command:
pacman -Sy kde -
Firefox File handling in KDE problem [SOLVED]
Recently I've noticed that Firefox doesn't give me a default app to open a file anymore. I mean, if I click on a PDF file, it used to open a dialog offering me to open it with kpdf (default). Now that same dialog just offers me to browse for the application I want to open the file with, so I have to manually browse to /opt/kde/bin/kpdf each and every time ! And the same with other file types. Does anybody else experience this?
You can test it clicking on this link:
http://www.irs.gov/pub/irs-pdf/fw4.pdf
Any help appreciated.
Thanks.
EDIT: I think this is related to this bug, since my /etc/mailcap and /etc/mime.types are empty except for java entry:
http://bugs.archlinux.org/task/6801
EDIT2: No, it doesn't have anything to do with that bug. It should work without /etc/mailcap.
Last edited by Bogart (2007-05-22 22:34:50)Ok, I found the problem.
In order to have Firefox offering you the default application to open a certain file, you need to install libgnome !
I removed bluefish some days ago with its dependencies and since then it stopped working.
libgnome depends on gnome-mime-data, gconf, gnome-vfs and libbonobo, but none of these are enough to make Firefox work correctly. It really needs libgnome.
Not sure if it would be a good idea to put these dependencies on Firefox. Probably not. Each one should decide if it's worth or not. Maybe some info would be useful, though. -
But wait, there's more... more wifi problems = glad to have my nexus 7
i work in a wifi zone. who doesn't. i used to use my ipad 2 (64gig wifi+3g iOS 6.0.1) all the time here to get things from dropbox or take notes with evernote, or to surf answers to questions posed in meetings. wonderful tool. then i updated the OS to 6...
and now i can't use it for more than a couple of minutes before wifi quits working.
i get the same spining wheel of death in the settings>wifi that others have complained about.
i've started carrying my nexus 7 around with the ipad and without failing even a single time the nexus has never had an issue connecting while the ipad sits and spins its wheel of death.
and all this can be had for $1,000 with tax. yea.
at home my wifi connectivity is much better with the ipad, but still it's worse than it was before the 'update'. further, if the nexus can connect i expect the 4 times more expensive, from the great minds at apple, ipad to be able to connect also.
guess i was wrong.
i don't get angry when computers can't do complex things that are relatively new, but wifi isn't new, and i get immensly hacked off when a company breaks a basic functionality of a devise and offers nary a word on a fix.
face it folks. this is just another IT gadget made by just another computer company.iOS 6.1 was just released today. Maybe there's a wifi fix.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Hi.
I had installed KDEmod and I deleted it yestarday (pacman -R kdemod-uninstall) then i installed kde (pacman -S kde).
But it generated some problems:
- KDM won't start now now:
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) SynPS/2 Synaptics TouchPad no synaptics event device found
(EE) Query no Synaptics: 6003C8
(EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
- I can't normally shutdown computer (no option in menu > leave)
- I can't set processor speed for powersave etc.
Please help.I dis the same as you some time ago, i.e. switched from kdemod to arch kde...I ran the command
pacman -R kde-meta
to solve my problems. When I tried to simply install kde I ran into a plethora of problems. Also make absolutely sure that you have no kdemod packages lyinga around before you do the update, run
pacman -Q | grep kdemod
and uninstall all packages. Also least but not last, make sure you are not in the kde desktop enviroment when you run these commands. Hope this helps.
Last edited by gbj13 (2010-10-15 13:59:36) -
Every so often and quite randomly, a song on my iPod will be at a lower volume than it should be. I'll be listening to an album ripped from a single source, and one of the songs will be quieter than the rest of the album. What's even more f u c ked up is that I'll be listening to the same album on iTunes and won't have that problem. Keep in mind that with iTunes I don't have the Sound Check option on, and I don't have any sort of manual volume adjustment turned on, either. In other words, this is just another case of my iPod just randomly f u c king up on my for no apparent reason.
I have also tried deleting the songs from my iPod and re-loading them, but that hasn't worked.take a look at this link
http://docs.info.apple.com/article.html?artnum=61655
according to this link, sound check calculates the volume from the info stored on the song file. part of the miscalculations that the ipod is doing has to do with the info embedded to the audio file and this info was made at the time the audio file was encoded. -
IDCS5 Win:More PanellTreeView problems...
Hello Fellow Coders:
The PanelTreeView widget is probably one of the most complex widgets in the SDK. It has a lot of opportunities to trip up the unwary programmer.
For example, I have a plugin that uses several simple PanelTreeViews (PTV) as listboxes. When the dialog is created the PTV uses the HierarchyAdapater to create the node list. If the data changes during the life of the plugin, it is my responsibility to change the node list; the hierarchy adapter is not called. However, if I dismiss the plugin, delete the data, and then call the plugin back, the PTV is not recreated; the HierarchyAdapter is not recalled to rebuild the node list. The PTV uses the node list from the last instance of the plugin being called.
This is of course, a problem. It means that either I am going to have to empty the PTV before leaving the plugin, or I am going to have to include code to empty and then recreate the node list if the plugin is recalled.
Is there a more elegant solution?
R,
JohnDirk:
I apologize for not being clearer on what my troubles are. I have no problem initializing the PanelTreeView the first time through. What happens is that if I call up the dialog, then dismiss the dialog, then leave the plugin then come back into the plugin and recall the dialog, the data from the previous run still populates the listbox, despite the fact that the data has changed. I even call ChangeRoot() but it does little. Putting a breakpoint in the HierarchyAdapter confirms that the list is not refreshed through it.
I finally wrote code that simply deletes all records in the list box, adds the new records and then calls ChangeRoot(). That seems to work. If there is no other more elegant way, then so be it.
Thanks nevertheless for your input. Take care.
John -
I was doing fine getting email on my powerbook and my iphone. Then I got a interesting problem. I deleted old emails, and surprise. I have a message I can't get too, and when I check mail, i get a "you'v got mail buzz" but i can't read the one message I missed.
Anyone have this, how do I get out of this loop?
I have gotten new messages, but I get a
Load More Messages, 2 received but one unread.
how can I reset my mail account on my iphone and get back to normal?
ThanksNo, that seems to be a bug. Happens on some of my accounts from time to time. Seems to happen on POP accounts moreso than IMAP accounts.
-
Ok, so im having the same problem as everyone else.
As soon as i connect my (20gb B&W) to my PC (winxp) windows immediately freezes.
So i spend all day trying to remedy this problem and halfway thru i realise i cannot even play the music on my ipod anymore when its not connected to my pc.
I follow these instructions:
1. Quit iTunes and disconnect the iPod.
2. If you have the iPodService running -- Right click task bar, select "Task Manager", click on Processes tab. If you find "iPodService.exe" in the list, select it and stop it.
3. Register Atl.dll manually. In Windows, click Start, and then click Run.
The Run dialog box appears. In the Open box, type "regsvr32 atl.dll". Hit return. Do you get a message? What does the message say?
4. Then in Windows, click Start and then click Run. Type in "cmd", hit return. In the dialog that comes up, at the prompt type in "C:\Program Files\iPod\bin\iPodService.exe /service"
5. Run iTunes and connect the iPod back up to it.
That fixed my windows connectivity problem, i was able to open up itunes and even put more music onto my ipod.
after i added more music, i was modifying some playlists and it froze up again, so i disconnect the ipod from my PC and try to see if any music will play. it doesnt.
I try out a diff pair of headpones without any luck, and then the ipod itself freezes.
is anyone else having any problems listening to music after the update?!
this is a huge problem, and i cant believe apple let this update go out like this...Yup, dump Internet Explorer and forget it, except for those occasional situations where sites won't work with other browsers ( like BT's bill payment site !! ) Firefox is brilliant.
-
Since upgrading to xorg 7 and kde 3.5.1 i have the following strange problem.
And i cant see whats missing , i even tried reinstalling xorg and kde.
KDE starts up fine even the jittery startup audio is fixed but when i open a window be it a terminal or browser and then minimise it to put it in the kicker it disappears.
But if i open the terminal again it says number 2 and on and on.
I dont know where kde is putting these apps but they are not dead.
But i cant see them on the task bar to maximise them its blank apart from the time and my start button and icons.
HELP
Justin SmithiesI have found something out if this helps ?
If i click my middle mouse button on the desktop i can see the opened terminal / browsers and open them.
Why are they no longer going to the task bar ?
How do i get this feature back that when i minimise an app it goes to the task bar, not just disapears until i click the middle button on the desktop ?
Justin Smithies
Maybe you are looking for
-
Bit Locker Data retrieval forgot key and password
Hi All, I am using Windows 7 utlimate version and unfortunately i forgot my password and key as a result of which i cannot retrieve my data . Can anyone please tell how to recover data without using password and recovery key
-
I have a problem with JUNavigationBar
Dear all, I developed a frame. In that there is a field of date. So make user friendly form I have placed a button. For button press i have added the functionality of calendar into it. So when the user presses the button he will get a calendar and th
-
PDF verson out of Documaker 12.1
We are working on a project to use the signature place holder in documaker. The software that receives the PDF from documaker needs the pdf to be version 1.4 or higher but documaker is producing pdf's that are version 1.3: Is there a way that we can
-
Combining multiple Tax Authorities onto one Mag file
I am trying to include multiple tax authorities to one Mag File layout. I have followed the directions provided in the 2009 Year end Tax reporter configuration guide, but the individual tax authorities are still not printing on one Mag file. Briefly:
-
No apps launch on new CS2 install
Hi all, Hopefully I'll provide enough information. I recently installed CS2 to a new MacBook Pro 15". The MBPro was running CS without a problem and I was asked to upgrade to CS2 by a client. On running the install for CS2 the installer fails the ins