More MBP Display Issues

OK. SO I know this subject has been posted on a number of times but I can't seem to find any definitive answer so apologies in advance for bringing it up again. I have had my 15" MBP for almost 20months and all was well until today when it decided not to display anything. The problem seemed to happen after a sleep when it wouldn't come out of sleep mode.
However, I can boot the machine up and even though there is no display, the machine is active - I've connected to it via Desktop Sharing. I've attempted a Firmware recovery but I'm not convinced this is working since I follow the instructions but the machine simply boots in to OS X almost immediately.
I have tried an external monitor but to no avail. I have also tried following some instructions that suggested deleting the old sleep file but again, no success.
One odd thing is that when I run up the system profiler via screen sharing I see the graphics adapter as GMA X3100. This is odd since surely this should say NVIDIA xyz? My MBP is a 3,1 model from early 2008. 2.4Ghz with 4GB DRAM running the latest patches.
Could this be the NVIDIA card issue that Apple have posted on their front page?
Any other troubleshooting tips?
Many Thanks!

All perfectly normal, although I'm surprised the fans are running so fast; my CPU is currently running at 68° and GPU at 57° and the fans are idling at 1000rpm. The left hand side of the machine will get hotter than the right, and the hottest point of the case will normally be near the screen hinge just above the F1/F2/F3 keys.

Similar Messages

MBP display issue. Apple refuses to repair.

i have bought my MBP in May 2008 and 2 or 3 months ago i discovered a grey fuzzy area underneath the screen. it is like a blur wich you can see best when you´re looking from the side on a dark background or even when the MBP is turned off!
i returned it last week to my local offical apple reseller and they sent it to the nearest repair center. yesterday they called me that the MBP is back in store but still in the same conditions. they told me the ´experts´ from the repair center decided that it is not different from other MBP screens.
it´s good noticeble and very annoying because i paid 1800 euro´s for one of the best machines on the market and it should be as good as i bought it because i treat it like my baby.
what can i do to get this repaired under warranty?
Message was edited by: younes

Grey fuzzies? You might have the same problem i'm currently getting fixed by Apple. I have one of the older Core Duo MBP's and recently my matte display started having these small grey fuzzy blotches on the screen. At first I thought i only had 1-2 fuzzies, but after i showed the Genius Bar the problem they found alot of them on the screen (after changing the background from the plain Leopard background to a pure white background). It's currently in the Depot getting fixed. If I were you, I'd defintely call AppleCare and have them transfer you over to a Dispatch rep.

More mbp heat issues.

hi,
I recently (about a week or two ago) got a 15" mbp 2.4 Intel version and it seems to run a bit hot. weather this is something to worry about or just paranoia I don't know. I installed istat pro and fan control and when im running off the battery the temp seems to run around 30/40 celsius with the fans ranging from around 2000/2200 rpm. When its running off the power cable it seems to get hotter right now with safari open and streaming a video my cpu is at 57 and my fans around 3000. The hottest is the gpu dioed that is at 66. Also where the lead is plugged in its gets a bit hot around that area. Basically what i would like to know is if this is normal or should i get it looked at?
thanks

All perfectly normal, although I'm surprised the fans are running so fast; my CPU is currently running at 68° and GPU at 57° and the fans are idling at 1000rpm. The left hand side of the machine will get hotter than the right, and the hottest point of the case will normally be near the screen hinge just above the F1/F2/F3 keys.

MBP 13" Retina late 2012 display issue

Hi,
I have a problem since the upgrade to Maverick :
This is happening :
With the display setup configured to have more space (1680x1050 if i'm right)
After playing a game in 1440x900 or after I connect my TV in HDMI with a replication of the screen between laptop and TV (meaning the retina screen is used in 1920x1080)
After those action, if my MBP go to sleep mode because I don't use it, at wake up I have the display issue at the bottom.
This appeared with maverik, I had no issue before.
If some one have some idea ?
My current work arround is that, after playing game or using my MBP on my TV, I change the screen scale and then the problem is not happening.

1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.

Display issue: green, flashing pixels, low resolution on my new MBP 17"

I just bought my MacBook Pro 17" on December 2010 from Authorized Reseller in Dublin.
After couple of days for the first time and now every 2-3 days my MBP's display goes suddenly pixleated with green, shiny pixels and all display appears like low resolution. After closing the lid and opening it again the problem disappears. During that display problem my computer has no issue with performance like: video playing, opening and closing applications, rebooting, etc. Here are some screen shots made by my photo camera during this display issue: http://img132.imageshack.us/img132/809/dsc03872j.jpg http://img64.imageshack.us/img64/6670/dsc03879x.jpg http://img834.imageshack.us/img834/7914/dsc03885z.jpg http://img23.imageshack.us/img23/3830/dsc03881g.jpg
I should mention that I also made a screen shot with Shiftcmd3 combination of keys during this display issue and it appears, as you can see http://img521.imageshack.us/img521/8618/screenshot20110123at204.png as it should be - sharp and clear. One of my friend said that maybe I should reinstall operating system, but my guess is that it isn't software (Snow Leopard) issue. By the way, I have all the latest updates.
Please, can you tell me what is the problem, what is causing it and what should I do?
Thank you.

Ok, guys, I should update my main post about screen issues on my MacBook Pro 17" 2010 model, because it was quiet a big issue. It was actually problem not with display panel (which was completely replaced and which didn't resolved that screen issue at all) but with motherboard which has been replaced (by Mactivate).
After almost 3 months I can say that the computer had no issues since the repair: no screen issues, no noisy running vents.
I must say I am happy with repair made by Mactivate (actually one of few repair services authorized and recommended by Apple). They arranged the pick up with their own currier with no charge, great communication and most of all - they did everything to resolve this quiet unusual issue with my display.
I really and honestly can recommend Mactivate to anyone in Ireland.

Mbp c2d 17" display issues

Hello,
Has anyone heard of updates or fixes for the brighter bottom display issues on mbp c2d? I'm still waiting for a fix or explanation. I really want to buy one but need a better quality display.
Thanks

Mine is a week 48 build and the model is 9C61, manufacturer 610.
I think it all looks very evenly illuminated to me. I ran LCDTest so I could see it with different solid colors, and it looks fine.
This is a glossy screen, if that makes any difference.
doug

Display issues in FCP X on my MBP

Hi there,
I downloaded FCP X from the App Store this week and installed it and I am having a lot of display issues. My MCP is the 13.3" model from mid 2010 and the graphics card is compatible. I have 8 GB installed, so that should be sufficient as well. The areas where I am having display issues are:
* I don't see the film strip in the event browser. I do see the listing of the files in the event browser.
* I can not see the Inspector browser. Clicking on the i icon does not do anything and does not bring up the inspector browser
* I can not see any of the effects. Clicking on any of the effects buttons does not do anything and does not bring up the effects browser
I also notice that when resizing the FCP window, it does not get repainted properly.
One last thing that is annoying, but I found a work-around for this, is the splash window shows when FCP has loaded. It does not open FCP with the same layout as I last used, in fact it is only showing the menu bar and nothing else.
I hope that someone can help me with any of these problems. I was really excited about getting started with FCP X, but this has been a downer so far....
Thanks.
Edwin

Hi,
i had the same problem when i used the 10.0 version....but i solved in three ways:
Restarting the computer;
or
Creating a new event,clic on new event and the old clips appeared like magic in the old event if you try to access it again....
or
Click and keep pressed the Event icon (the purple star); try to put it in "Machintosh HD" or any hdd you have the event. Magically the clips are again in the browser....
Try......
Cheers
Lamberto

MBP Retina Display Issues

Ok, so got a new MBPr this week and there are a few issues.
1. When I plug the MBPr into a 27" imac to use as a secondary display it doesn't work
2. When I plug in the HDMI to any other display nothing happens on the other screens, while the MBPr stays the same
3. Has also had problems awaking from sleep
Anyone else having display issues?

I cant speak for other but when I get mine I will post up what I get for you.

Macbook Pro Early 2011 Display issue

Hi all,
After reading the replacement program that has been extended to MBP for 15" and 17", is there going to be any news with regards to the 13"?
The reason why I'm asking is that while I'm not sure if mine is an isolated issue or widespread/common occurrence, I have had my logic board replaced last year due to a display issue, and currently still unable to run external display, despite reading up on discussion that is going on.
The symptoms mirror that of the 15"/17", just that the 13" does not have a dedicated GPU.
Hope to get more suggestions/ solutions/ news to potential replacement program from here.
Thanks all!
Regards,
Ziang

Welcome to Apple Support Communities
Early 2011 15 and 17-inch MacBooks Pro have had several GPU issues that causes graphic corruption, and it was an issue that showed in most MacBooks Pro. However, this does not apply to the 13-inch MacBook Pro, so I think it is just an issue that has appeared on your Mac but there is not a reason for a replacement program.

Mac applications have blurry/fuzzy fonts and other display issues

About two days ago my MBP display started acting funny. To start, I noticed my itunes font started going blurry. The words in Word are fuzzy as well. Other apps like firefox and safari I can read just fine. Next, I noticed this (http://i.imgur.com/Hfhq0.png) happening. When I move a window in any application the window would automatically start getting larger. Next, this (http://i.imgur.com/6ySCT.png) became an issue. Notice the white at the bottom of the box. Finally this (http://i.imgur.com/wYdUe.png) reared it ugly head in firefox. I have no idea what's going on. Other forums and google have been no help at all and you guys are my final hope. If you need any more information please let me know. Thanks in advance for saving my baby.

OK I don't use a two-button mouse but control-click brings up that window for me and it displays fine just pulling the background image as the border with no white space ...
I'd guess it's something related to the background image you're using, have you tested the effect when you go back to a plain colour or an Apple supplied background ? What format is the image you've set as background png, jpg or something unusual ?

Early 2011 Macbook external display issues after firmware update

I have a 2011 MBPro 15". After performing the firmware update in late April, I have continual issues when I connect my monitor. The screen is blank and I can move the mouse tap the keyboard etc. The display may come up for a scond and then it will close and the machine goes back to sleep. More wiggling and the process starts over.
If I raise the lid it may bing up the external display. Restarting is the only sure fix.
I also was unable to make a presentation today because the projector I was connected to would not show the MBP display.
I tried all the key combinations, detect display etc. and nothing.
Can I somehow go back to the prior firmware? Other solutions?
SMC Version (system): 1.69f1
EFI Driver Version: 01.00.521

I recently did a software update to my MacBook pro and had a similar issue, on restart it gets to the apple logo then just shuts off, after multiple hours on the phone with apple care they told me that it was coincidence that it happened at the same time as the update and it would be costly to repair as it was either something to do with display or logic board. I took my MacBook into my retail location I bought it from and was told that they have had MULTIPLE people bring in macbooks with the SAME issue (I live in a really small city so the amount of people is quite large proportion wise) and that they could fix the issue by remotely resetting the MacBook at a cost of $130-$150. Relatively cheap considering what I was fearing, but if this is a common problem related to Apples update why are we paying to fix it and why is apple support saying its something major???

GPU/display issue?

Hi
I'm having a serious problem with a mid 2008 intel (alu) iMac (2.66GHz Core 2 Duo, running Mavericks). I think from my searching around that it may be a GPU issue, but could also be display.
The mac won't boot properly, getting no further than the grey screen with apple logo. If started up normally, this screen displays a checked pattern. It goes nowhere and the only way out is to do a hard shut down.
I can boot in safe mode though. In this mode, the mac generally seems to be functioning OK, but instead of checks I have a very fetching set of bands/stripes. They are sometimes pink and orange, but at the moment they are white and turquoise. Each band is made up of a series of eight stripes, each stripe a few pixels wide. There are 13 bands across the screen: the desktop can be seen underneath/through the bands and can also be seen normally between the bands (so I have normal bands and striped bands, each the same width, repeating across the screen). The cursor arrow attracts in own mini striped band - a square the same width as the main bands. (image upside down for some reason!).
As I say, my googling suggests that this is probably a GPU issue (the ATI Radeon HD 2600 Pro, not the apparently dodgy NVIDIA one that seems to have cursed some early 2008 imacs). What I don't get is why I can boot in safe mode but not at all otherwise - what gets disabled in safe mode that allows it to bypass what is otherwise an apparently total barrier to successful booting? When I try to boot normally and get stuck on the Apple logo, I can hear the mac working away, but is just doesn't seem able to go all the way. The really weird thing is that even when it is stuck at this stage, I can still remotely access the iMac from my MBP - I can open and copy files over the network. This suggests that it is in fact sort of booted, but just not displaying itself. I cannot screen share though. When booted in safe mode, I can screen share, and the stripes show up on the shared screen view on the MBP. Again, this suggests to me it is a GPU issue, not a display issue.
Unfortunately, this is my old iMac whcih i have just passed on to my mother in law, who is based 250 miles from me. I am visiting for a few days and so need to either get it sorted or conclude that it's toast (seems little point in forking out for a new GPU for a near six year old machine, even if I could swap it). I don't mind taking it apart (I swapped the hard drive last year) if that woudl help identify the source of the problem.
Any ideas much appreciated! Thanks in advance.

Hi Tammy (and anyone else who can help)
That's good news. Things at my end have gone a little strange. I put back all the extensions one by one and was able to boot nromally, even once all of them were back. I did however get a message that the ATI 2600 extension wasn't installed properly, but as it was still booting and I couldn't see any way to reinstall it (other than just popping it back in the extensions folder) I moved on. The screen was getting a bit worse, but still just striped rather than banded.
Having read further threads on similar problems, I decided to take the whole thing apart (great ifixit step by step guide). Nothing seemed amiss - all connections seemed secure, no obvious burnouts. Removed a LOT of dust and put everything back together again.
The machine started straight up when I plugged the power cord back in (I didn't get a chance to press the power button) - the screen flashed briefly round the edges and then stayed black. No stripes, no bands, no image.
I could hear the hard drive spinning, so pressed some buttons on the keyboard and got a warning tone, suggesting some sort of boot. I forced shut down and restarted and then tried to log in with the screen still blank. The bad news is that the screen has stayed black since then. The good news is I now have full remote access and can even screen share. The screen now has no bands when I screen share - I can see and interact with the full screen as normal and have managed to retrieve files etc over the network.
I am still deciding whether to order a new (second hand) video card. Looking in system profiler to get info on this it now shows no info AT ALL under graphics/display and in the 'more info' tab from the apple menu 'about this mac' version of system info it now says "No display detected". I am now unsure whether I have somehow 'blown' the display (I still get a brief white margin round the screen on start up) or whether both graphics card and screen are both goosed, or whether I should take it apart again to make sure the display itself is properly connected. If the graphics card was fubar, would I be able to see anything at all via screen sharing? I don't have an external display I can test it with. I don't want to fork out for GPU only to find it is the display.
Any views on next steps?
Col

Re: [iPlanet-JATO] More on ComputedColumn issue

Vladimir--
I'm going to answer this question without doing my full homework on it;
please let me know if I hit the mark or not. If I understand correctly, you
have a problem using a model for both UPDATE and SELECT queries because of a
computed column...correct?
If so, this issue is solved in JATO 1.2. 1.2 has an attribute in the field
descriptor to indicate in which type of queries a field should be used. You
can use this attribute to indicate that a field should only be used for
UPDATE queries, SELECT queries, or whatever combination of query types you
require. You can then define synthetic fields for use only during one of
the query types.
Does this sound useful in fixing your issue? A way around this in JATO 1.1
would be to create separate models for SELECT and UPDATE queries. The
SELECT model could contain all the fields for the joined query, but the
UPDATE model would contain info for only one table. The 1.2 feature simple
allows you to do the same using one model.
Todd
----- Original Message -----
From: "vivanov4114" <vivanov@b...>
Sent: Friday, January 11, 2002 8:12 AM
Subject: [iPlanet-JATO] More on ComputedColumn issue
We have a similar problem with do's ComputedColumn after the
translation as Kostas described in his detailed message #439.
We have JATO/iMT version 1.1. Is the resolution of this problem added
to the version 1.2 (or 1.2.1)?
I've tried to adjust the ModelImpl class based on the .sdo file
(using ComputedColumn attributes) for these fields and failed.
Whether I missed something else, or our situation is a little bit
different.
In our case the dataObject has one Computed Field from one table and
another Computed Field from another table along with joint between
these two tables and third one, and, finally, the whole stuff is
under the repeatable (with static fields bindings to these two
computed fields).
The modelImpl class after the translation (as in the #439) has the
same values "" and "." for ..._NAME and QUALIFIED_..._NAME strings
respectively (for each computed do's field).
I guess that we could meet extra problem with this (for manual
adjustment) because of there is no TableName attribute in .sdo file
for computed field (as well as there is no ColumnName attribute for
computed field). If ComputedColumn attribute (computed field) could
play a role of ColumnName attribute (regular case), what would be an
analog of TableName attribute for computed field?
The bottom line of this is as follows: we have a same
SQLException "Invalid Column Name"
from ResultSetModelBase.updateModel() as Kostas described. It causes
the problem for
RequestHandlingTiledViewBase.executeAutoRetrieving() method that
can't bind the proper Model.
Finally, beginDisplay() method from
pgXXXXPriorityCountTiledView.class throws exception and
jasper compiler brings run-time error (Tomcat 3.2).
Kostas, if this problem still exists for translation of such cases,
could you please post a fragment that fixed you original problem in
addition to the message #439 (just to be sure, that I haven't missed
something important).
Thank you very much in advance.
Vladimir Ivanov,
P. S. I've enclosed the excerption from the .sdo file for this
dataObject below.
Class "SQLObject" ;
Name "doPriorityCount" ;
DataFields {
0 { // first df is a computed column from the first
//table
Class "DataField" ;
Name "dfPriorityDesc" ;
ComputedColumn "MIN
(MOS.PRIORITY.PDESCRIPTION)" ;
1 { // second df is a computed column from the second
// table
Class "DataField" ;
Name "dfPriorityCount" ;
ComputedColumn "COUNT
(ASSIGNEDTASKSWORKQUEUE.PRIORITYID)" ;
2 { // third df is a regular df
Class "DataField" ;
Name "MOS_PRIORITY_PRIORITYID" ;
TableName "MOS.PRIORITY" ; // this attribute
// doesn't exist for ComputedColumn
ColumnName "PRIORITYID" ; // this attribute
// doesn't exist for ComputedColumn
DataCachingEnabled "False" ;
DataCachingDuration "0" ;
DataCachingMaxRows "200" ;
DataObjectType "Select" ;
Tables "MOS.ASSIGNEDTASKSWORKQUEUE,MOS.PRIORITY,MOS.DEAL" ;
SQLDistinct "False" ;
SelectFilter {
"MOS.DEAL.SCENARIORECOMMENDED" ;
"=" ;
"'Y'" ;
"AND" ;
"MOS.DEAL.COPYTYPE" ;
"<>" ;
"'T'" ;
SelectOrder {
"MOS.PRIORITY.PRIORITYID ASC" ;
SelectGroup {
"MOS.PRIORITY.PRIORITYID" ;
EnableEntireTableDelete "False" ;
EnableEntireTableUpdate "False" ;
SQLTextOverrideSelect "Partial" ;
SQLTextOverrideDelete "None" ;
SQLTextSelectJoin "MOS.ASSIGNEDTASKSWORKQUEUE.DEALID =
MOS.DEAL.DEALID
AND MOS.PRIORITY.PRIORITYID <> 0
AND MOS.PRIORITY.PRIORITYID =
MOS.ASSIGNEDTASKSWORKQUEUE.PRIORITYID(+)
AND MOS.ASSIGNEDTASKSWORKQUEUE.TASKSTATUSID
(+) = 1 " ;
For more information about JATO, including download information, pleasevisit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Todd,
Sorry for the delay with the answer, I've tried to obtain JATO 1.2
and repeat the project migration to verify whether version 1.2 solves
my problem or not (actually, it is a pilot sub-project).
Unfortunately, I still have no 1.2 version.
Let me try to answer on your question without getting the results
with JATO 1.2. Your explanation sounds like version 1.2 is very close
to solve the problem. Actually, our situation is easier because we
have SELECT object only, not SELECT and UPDATE. For data integrity
the only 'Select' ND's do(s) have been used through the whole
project. The backend communication (update, delete) is provided via
EJB like (entity) Java classes.
My question is: could I define synthetic field with 1.1.1 version. By
the way, word synthetic reflects the possibility to construct the
field under certain SQL circumstances (SELECT, UPDATE, e.g.) or the
possibility to construct a `fake' field (for example,
CountColumn of a do) as well. If the later is true, could you please
give a brief idea how to create this synthetic field.
After the translation in the doPriorityCountModelImpl class we've
got:
public static final String COLUMN_DFPRIORITYDESC="";
public static final String QUALIFIED_COLUMN_DFPRIO
RITYDESC=".";
public static final String COLUMN_DFPRIORITYCOUNT="";
public static final String QUALIFIED_COLUMN_DFPRIO
RITYCOUNT=".";
(see my original post please with details, as well).
If this is not a problem for 1.2 please do not waste your time to fix
it for 1.1.1. I need to repeat my results with the version 1.2 anyway.
We have a number of similar idioms through the project. In this
particular case, the CountColumn that counts the field from another
table may bring problem for manual adjustment (see my original
notes). The whole SQL query is as follows (for this case):
SELECT MIN(MOS.PRIORITY.PDESCRIPTION),
COUNT(ASSIGNEDTASKSWORKQUEUE.PRIORITYID),
MOS.PRIORITY.PRIORITYID
FROM MOS.ASSIGNEDTASKSWORKQUEUE, MOS.PRIORITY, MOS.DEAL
WHERE MOS.DEAL.SCENARIORECOMMENDED = 'Y'
AND MOS.DEAL.COPYTYPE <> 'T'
GROUP BY MOS.PRIORITY.PRIORITYID
ORDER BY MOS.PRIORITY.PRIORITYID ASC
During the pre-handler activity (it is the part of our Object
Framework on the top of Netdynamics Object Framework) system passes
id (and mos.deal.dealid = XXX) to the do (select query). After the
run-time execution of this do the results are displayed on the screen
bind to the repeatable statics.
Thank you very much,
Vladimir
--- In iPlanet-JATO@y..., "Todd Fast" <Todd.Fast@S...> wrote:
Vladimir--
I'm going to answer this question without doing my full homework on it;
please let me know if I hit the mark or not. If I understand correctly, you
have a problem using a model for both UPDATE and SELECT queries because of a
computed column...correct?
If so, this issue is solved in JATO 1.2. 1.2 has an attribute in the field
descriptor to indicate in which type of queries a field should be used. You
can use this attribute to indicate that a field should only be used for
UPDATE queries, SELECT queries, or whatever combination of query types you
require. You can then define synthetic fields for use only during one of
the query types.
Does this sound useful in fixing your issue? A way around this in JATO 1.1
would be to create separate models for SELECT and UPDATE queries. The
SELECT model could contain all the fields for the joined query, but the
UPDATE model would contain info for only one table. The 1.2 feature simple
allows you to do the same using one model.
Todd
----- Original Message -----
From: "vivanov4114" <vivanov@b...>
Sent: Friday, January 11, 2002 8:12 AM
Subject: [iPlanet-JATO] More on ComputedColumn issue
We have a similar problem with do's ComputedColumn after the
translation as Kostas described in his detailed message #439.
We have JATO/iMT version 1.1. Is the resolution of this problem
added
to the version 1.2 (or 1.2.1)?
I've tried to adjust the ModelImpl class based on the .sdo file
(using ComputedColumn attributes) for these fields and failed.
Whether I missed something else, or our situation is a little bit
different.
In our case the dataObject has one Computed Field from one table and
another Computed Field from another table along with joint between
these two tables and third one, and, finally, the whole stuff is
under the repeatable (with static fields bindings to these two
computed fields).
The modelImpl class after the translation (as in the #439) has the
same values "" and "." for ..._NAME and QUALIFIED_..._NAME strings
respectively (for each computed do's field).
I guess that we could meet extra problem with this (for manual
adjustment) because of there is no TableName attribute in .sdo file
for computed field (as well as there is no ColumnName attribute for
computed field). If ComputedColumn attribute (computed field) could
play a role of ColumnName attribute (regular case), what would be an
analog of TableName attribute for computed field?
The bottom line of this is as follows: we have a same
SQLException "Invalid Column Name"
from ResultSetModelBase.updateModel() as Kostas described. It causes
the problem for
RequestHandlingTiledViewBase.executeAutoRetrieving() method that
can't bind the proper Model.
Finally, beginDisplay() method from
pgXXXXPriorityCountTiledView.class throws exception and
jasper compiler brings run-time error (Tomcat 3.2).
Kostas, if this problem still exists for translation of such cases,
could you please post a fragment that fixed you original problem in
addition to the message #439 (just to be sure, that I haven't missed
something important).
Thank you very much in advance.
Vladimir Ivanov,
P. S. I've enclosed the excerption from the .sdo file for this
dataObject below.
Class "SQLObject" ;
Name "doPriorityCount" ;
DataFields {
0 { // first df is a computed column from the first
//table
Class "DataField" ;
Name "dfPriorityDesc" ;...........................................
ComputedColumn "MIN
(MOS.PRIORITY.PDESCRIPTION)" ;............................................
1 { // second df is a computed column from the second
// table
Class "DataField" ;
Name "dfPriorityCount" ;
ComputedColumn "COUNT
(ASSIGNEDTASKSWORKQUEUE.PRIORITYID)" ;
2 { // third df is a regular df
Class "DataField" ;
Name "MOS_PRIORITY_PRIORITYID" ;
TableName "MOS.PRIORITY" ; // this attribute
// doesn't exist for ComputedColumn
ColumnName "PRIORITYID" ; // this attribute
// doesn't exist for ComputedColumn
DataCachingEnabled "False" ;
DataCachingDuration "0" ;
DataCachingMaxRows "200" ;
DataObjectType "Select" ;
Tables "MOS.ASSIGNEDTASKSWORKQUEUE,MOS.PRIORITY,MOS.DEAL" ;
SQLDistinct "False" ;
SelectFilter {
"MOS.DEAL.SCENARIORECOMMENDED" ;
"=" ;
"'Y'" ;
"AND" ;
"MOS.DEAL.COPYTYPE" ;
"<>" ;
"'T'" ;
SelectOrder {
"MOS.PRIORITY.PRIORITYID ASC" ;
SelectGroup {
"MOS.PRIORITY.PRIORITYID" ;
EnableEntireTableDelete "False" ;
EnableEntireTableUpdate "False" ;
SQLTextOverrideSelect "Partial" ;
SQLTextOverrideDelete "None" ;
SQLTextSelectJoin "MOS.ASSIGNEDTASKSWORKQUEUE.DEALID =
MOS.DEAL.DEALID
AND MOS.PRIORITY.PRIORITYID <> 0
AND MOS.PRIORITY.PRIORITYID =
MOS.ASSIGNEDTASKSWORKQUEUE.PRIORITYID(+)
AND
MOS.ASSIGNEDTASKSWORKQUEUE.TASKSTATUSID
(+) = 1 " ;
For more information about JATO, including download information, please
visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Display issue on brand new 2014 X1 Carbon Touch

So I was about to start raving about my X1C that I just received. Loving the display, the keyboard, build quality, etc. I had no gripes and was just browsing away when suddenly the screen did the full glitch. I recognize this as what happens when something's messed with the motherboard/display adapter. So I gave it a reset. All was normal and then it happened again. I was able to replicate it 3-4 times and it keeps happening. I never dropped it or anything. It was always just stationary.
I can't believe this. I had problems with the first gen non-touch and touch. I was hoping by now they have improved.
Link to image 1
Link to image 2
Link to image 3
Moderator note: images totalling more than 50k converted to links per forum rules: Lenovo Community Participation Rules

Hi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you have display issues in your brand new Lenovo X1 carbon.
From the snapshots, it seems like a cable/LCD issue. Is the display working fine when you connect it to an external monitor?
Since it’s a brand new machine, I strongly recommend you to contact our technical support for assistance.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Best Regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Repeated iMac Problems, Display Issues now Kernel Panics

I’m lost on what’s wrong with my 2008 iMac and I think I just have to bring it back into Apple for a third time to have it repaired. But something is obviously not working that is causing these issues.
About a month ago, my computer began showing heavy pixilation, flickering images and the on-screen graphics. The computer appeared to keep working in the background from what I could tell so I came to conclusion that it must be the graphics card that’s failing and I’ll need to have it looked at.
My 2008 iMac was custom-built by Apple with the Nvidia GeForce 8800GS that was offered as an upgrade option. There have been several posts on the display and graphics discussion board about that graphics card along with other postings other places about the problems the Nvidia GeForce 8-series had.
The display problems I mention above would not happen immediately, it would happen as the computer warmed up and was used for 3-5 minutes.
Anyway I brought my computer into Apple explained to them what I believed was the problem and the Apple Store technician agreed with me. Because I did not purchase AppleCare, it cost me $400 and a week without my iMac to have that card replaced.
I got the computer back two weeks ago and everything seemed fine. It was working as it always had. I even was running SMC Fan Control in order to keep the computer as cool as I could (the Nvidia problem was related to overheating).
But this morning, this is what I woke up to:
http://img97.imageshack.us/img97/7436/photoijr.jpg
The computer now has a semi-permanent pixilation when it starts up (as suppose to the pixilation 3-5 minutes into use). But more worrisome now is I cannot start up the computer without it going into a kernel panic. I tried resetting the PRAM, I tried starting in safe mode. The only thing I haven’t tried yet is booting from an external HD which I will try this evening (to hopefully isolate it if it’s hardware or a software problem).
The Apple Hardware Test has been unhelpful. When it originally failed three weeks ago, the test showed nothing and this morning when I ran it (permanent pixilation and all), it showed nothing. I feel like if it was a software issue the pixilation would have disappeared during the hardware test because that’s not an OS-X based program.
Here are my specs on this computer:
2008 iMac 24" 2.8ghz Intel Core Duo, 4 gigs of RAM (Crucial Purchased, I have original sticks somewhere), 1 TB HD, Nvidia GeForce 8800GS.

Hi, just to update you, I came home today and did a few things that didn't seem to solve my Mac's problems:
- I booted up from my firewire "safe" drive that I keep a copy os x on to see if I had a corrupted hard drive or something. It booted into the kernel panic I described above.
- I also swapped out the crucial RAM for Apple's factory RAM. It also booted into the Kernel Panic.
In both incidents, the display issues didn't go away. Now instead of pixelization i have vertical bars running in a pattern across my screen.
I'm currently trying to boot onto the OS X CD at this point to see if I could do a reinstall. It's taking quite awhile to boot into that.
With that in mind, I think we're still having graphics card issues or more seriously some logic board problem.

More MBP Display Issues

Similar Messages

Maybe you are looking for