More Options in QOS please?

Is there any way to re-configure the flash bios to allow more options in in QOS for more computers of the Linksys WRT54GL? I have two areas where I can add a computer and select weather it should have lowest-highest priorities, but two computers are not enough. I would like an extended ability to add more computers to this list, can anyone tell me if there is a bios out there with this abilitiy? I would be willing to look into third party bios as well if they are the only ones which support this. I like Linksys and their products, however, I believe they should have added extended features to the bios in this case. I understand the WRT54GL code is under GPL and that I could be able to edit it myself had I known programming, alas I do not and I could very easily brick my router.. and that would not be fun

I think only 3-4 computer can be added under QoS on the router ....
Even you upgrade the firmware of the router ... still the basic features remains the same .....

Similar Messages

Just updated to iCloud, but I can't find the 'purchased' list on the itunes store on my iphone. There's no button for it on the toolbar or under the 'more' option. Want to play/download my puchased music via iCloud on my iPhone.... Help someone please?!

Just updated to iCloud, but I can't find the 'purchased' list on the iTunes store on my iPhone. There's no button for it on the toolbar or under the 'more' option. Want to play/download my puchased music via iCloud on my iPhone.... Help someone please?!

Hi again Limons,
just got your last reply per mail, re: 'presently only available in the USA.'
Unfortunately, you're right. Just found this article: http://www.digitalmusicnews.com/stories/061011icloud
seem like it's going to be a while before this gets sorted out . . .
Frustrating outcome to my question, but thanks a lot for helping me sort out what the problem was :-)
All the best to you.

CTIOS softphone version 7 dial pad 'more' option not showing all callvar

All. I have an ICM version 7 system in lab. When I login CTIOS softphone and try to use 'more' option in dial pad to set a callvar1 before dialing out I saw only var8,var9, var10 and transfernote, customerid showing up. I've seen all call vars showing up in the 'more' option in other ICM system so I wonder why in this lab system I'm only seeing three of them. I've checked registry and couldn't find anywhere to configure it. Can someone please help?
Thanks.

Are the variables missing from the call grid as well? If so, someone may have disabled the display of certain variables on the server. Check the keys:
[HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems, Inc.\CtiOs\\\ EnterpriseDesktopSettings\
All Desktops\Grid\CallAppearance\Columns\Number\Position] [HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems, Inc.\CtiOs\\\ EnterpriseDesktopSettings\
All Desktops\Grid\CallAppearance\Columns\Number\Position]
More info on how the registry keys work can be found in the CTIOS System Manager's Guide here:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ctios/ctios7_0/installation/guide/cti70mgr.pdf

Need to Create More Options in Cisco ACS 5.2 User section

Hi Team,
I Need to create more options on Cisco ACS 5.2 under internal identity store in users. please help how to do add, default not showing all.
i have seen on internet. attaching doc.
Regards
MR

To create additional attributes for internal users do the following:
- go to System Administration > Configuration > Dictionaries > Identity > Internal Users
- Press Create to define the additional attributes you require
For each attribute can
- define the type
- give a default value. This will be applied to all existing users and appear as default when new user is created
- indicate whether the attribute is required and must be defined for each user
- define a policy condition. If define such a condition will appear as an option when customize rules in a policy

'More' Options in an Activity

Hello,
When I create an Activity (Task), under the dropdown list in the menu option 'More' I can see there is the option to 'Send Email', but when I create an Activity ( Business Activity) and check the 'More' options, then there is no option to 'Send Email'. What controls what the user sees in the options in this menu dropdown list ?
Regards
Chan

Hello there,
I believe that the same has been handled/restricted on the basis of Transaction type of the Activity being created here.
going to the below link will provide info about transaction types;
[http://help.sap.com/saphelp_crm40/helpdata/en/51/710b3bbe61e405e10000000a11402f/content.htm|http://help.sap.com/saphelp_crm40/helpdata/en/51/710b3bbe61e405e10000000a11402f/content.htm]
Also for your current issue; please do the following:
1. Open the UI component BT126H_APPT via Tcode: BSP_WD_CMPWB
2.Go To View corresponding to Overview Page
3. Go Toolbar method GET_BUTTONS
It should be restricted int he same place.
Please reply if this helps.
Regards,
Vinamra.

How to set opportunity under more option after saving activity.

Hi,
After creating activity i want to make opportunity under more option in over view page button. but we have here follow up one facility is there under this opportunity transaction is there but i need to show opportunity in more option it self not in under follow up. i need to create for this Action profile first then i need to show in web ui. how can i show in web ui under more option.
please guide me.
rose.

Hi,
to get the button in the button list you have to redefine the method IF_BSP_WD_TOOLBAR_CALLBACK~GET_BUTTONS in the implementation class of your overview view.
example for a new button:
CLEAR ls_button.
      ls_button-type     = cl_thtmlb_util=>gc_separator.
      ls_button-enabled = abap_true.
      APPEND ls_button TO rt_buttons.
      CLEAR ls_button.
      ls_button-type     = cl_thtmlb_util=>gc_icon_nav_forward.
      ls_button-text     = '60 Tage verschieben'(001).
      ls_button-tooltip = 'Fälligkeitstermine um 60 Tage verschieben'(002).
      ls_button-on_click = 'SHIFT60'.                         "#EC NOTEXT
      ls_button-page_id = me->component_id.
      ls_button-enabled = abap_true.
      APPEND ls_button TO rt_buttons.
      CLEAR ls_button.
The first part is the separator, the second part is the button itself. Here the ls_button-on_click is important. This is the name of the eventhandler you call by clicking the button. Just create the eventhanlder with the same name for your view. Inside the eventhanlder you could code whatever is required.
I hope this helps.
Kind regards
Manfred

Adding more options onrollOver of the DataGird Row

Hi All,
I have Saved Reports DataGrid (which the Data comes from
external XML
file) for which, I want to add more Options (Like open,
Delete,
Rename) on rollover of the particular Row. as we have in AOL
Email.
Please let me known how to get this done for the Flex
DataGrid, if
possible with Example code
Thanks in Advance
PSamanth

Camelot summarized it perfectly..
What it ultimately comes down to (as always!) is how much money you have.
Cheapest is to buy Firewire drives and hook them in. Problem is, if the drive dies so does your data.
Most expensive and fastest is indeed Fiber channel stuff. But its expensive. A 6TB G-Tech FC RAID unit will cost you at least £3000 if you can get a good deal. And you have to have a FC card as well..
In between, and with the advantage that you can use the onboard kit, have a look at the Drobopro gear... for £900 ish you can get an empty unit and populate it with whatever drives you want. Expandable, has redundancy built in and simple to use. Has dual interfaces (FW and iSCSI). Performance wise, im not 100% sure as I dont have one myself, but reviews have been pretty positive so far.
The G-Tech FC RAID boxes are very fast and very nice pieces of kit. I have several of them on various macs dotted around, and theyre used for editing HD video. They handle it without breaking a sweat. G-Tech also keep upping the capacity, so the 6TB ones may not be the current versions...
Hope this helps!

No exact match was found. Click the item(s) that did not resolve for more options. You can also use Select button to choose External Data.

HI,
I have SharePoint Online 2013 environment, i have created a external content type from wcf service. I want to use this as External Data column in document library. When i look for values in content type it populates and when i click any values and adds and
then click saves it shows the below error
No exact match was found. Click the item(s) that
did not resolve for more options. You can also use Select button to choose External Data
__fkc000950056003700kc000950056003700kc000e400f2001400kc000950056003700k830035004700160027004700d20057000700020064009600870056004600:
No Matching Items
Please help on this.
varinder

I don't understand the question exactly, could you restate it. Sorry mate, I might just be braindead.
But, as far as the issue, it is by design. the column is a lookup columns which essentially ties to the external data. if that data is removed, the column on your simple list becomes invalid and any edits of the simple list item will require
it to be changed.
are you wanting to make the ECT read only? that's simple enough. you can pop open SPD and edit the ECT, then remove the C/E/D operations (create/update/delete). That will not, however make it read-only in any other systems that access that
external data, as I assume its not just SP or else it wouldn't be external
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

About the Zoom-in "more Options"

Hi,
I was looking for a way to zoom-in to my screen on my iMac, however i did not want the screen image to move when i
move my mouse (near the edge of the screen). So under "Accessibility" - "Zoom" - "more Option". its states:
When Zoomed-in, the screen image moves:
O Continuously with pointer.
O Only when the pointer reaches and edge.
O So the pointer is at or near the center of the screen.
However, one of the option must be picked, they is method of un-checking any of them, so that what i Zoom in to my screen, and move the mouse to the edge the screen image itself will not move.
Please fix this issue.
Thank you.

You are not speaking to Apple on these forums, they do not read or participate in them. Everyone that posts and reads them are end users just like yourself.
If you have feedback for Apple please post at www.apple.com/feedback.

Alert box:No more free items available, please create new one

Hi,
We are running a SAP ERP Ecommerce, we get a strange alert box message "no more free items available, please create a new one". This alert window pops up only when you have created one order in a session and you are trying to create another order. Has anyone come across this issue?
Steps to recreated this issue
1. Create an order with any product - quantity is rounded to next possible value.
2. Order created, close the order.
3. Trying to create new order. (Product field is not a text box anymore)
4. Try to transfer product from catalog by hitting shopping basket icon.
5. Error message -> "No more free items available, please create new one".
Thanks,
-Tarun

Hi,
We are running a SAP ERP Ecommerce, we get a strange alert box message "no more free items available, please create a new one". This alert window pops up only when you have created one order in a session and you are trying to create another order. Has anyone come across this issue?
Steps to recreated this issue
1. Create an order with any product - quantity is rounded to next possible value.
2. Order created, close the order.
3. Trying to create new order. (Product field is not a text box anymore)
4. Try to transfer product from catalog by hitting shopping basket icon.
5. Error message -> "No more free items available, please create new one".
Thanks,
-Tarun

I was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

i was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

What exactly are you seeing on the phone's screen ? If the iTunes icon and cable then the phone is in recovery mode, in which case it's too late to take a new backup or to copy any content off the phone - you will have to connect the phone to your computer's iTunes and reset it back to factory defaults, after which you can restore to the last backup that you took or just resync your content to it

I upload my iPhone 4s and it went to recovery mode i have tried to exit recovery mode by pressing the home and the power bottom but it doesn't work what more can i do please help me

i upload my iPhone 4s and it went to recovery mode i have tried to exit recovery mode by pressing the home and the power bottom but it doesn't work what more can i do please help me

http://support.apple.com/kb/ht1808

Vendor EDI invoice // More options in OBCD

Hi,
SAP standard OBCD or table T07M does not have much option and new fields can also not be added for more options in determination of tax code from different ship-from-country .
Like to know the possible ways to do it.
With regards,
Mrinal

Hi ,
I meant table T076M.
Regards,
Mrinal

Where is the "search more" option in Gmail?

Currently using: Lumia 920 white - Windows Phone 8
I had a Lumia 800 before and when opening my email and searching for something, if it did not come up I could use the "search more" option and It would search in all my email. (not synced)
It looks like this option is not available any more in WP8.
However I can still use "search more" for hotmail or outlook but not for Gmail.
Anyone else experiencing this same problem?
How are you supposed to search through not-synced emails in gmail?
Thanks,

Found the answer here:
http://www.wpcentral.com/quick-tip-gmail-settings-windows-phone-8

TS3391 I movie 09 on my Macbook Pro isn't recognizing the presence of my Sony handycam dvd201E - nor does it offer options - any advice please? dave R

I movie 09 on my Macbook Pro isn't recognizing the presence of my Sony handycam dvd201E - nor does it offer options - any advice please? dave R

I have a MacBook Pro 15 inch early 2011.
The new features available in OS X Yosemite like Continuity, Handoff,etc are not supported in this model.
I did upgrade RAM to avoid any possible slowdown.
I found replacing the HD with SSD is too expensive for a 4 years old model.
Replacing the CPU/GPU is not for amateurs.
If you think that rebuilding a Mac part by part is a viable option, please go ahead and rebuild it.
Best.

More Options in QOS please?

Similar Messages

Maybe you are looking for