More Problems - Now No Service!

I was having trouble with the WiFi connection at home, so I tried some of the suggestions here...
1) Turn off and then on again
2) Turn off router and modem and turn on again
3) Hard reboot of phone by holding both buttons down
4) System restore
After the system restore WiFi was working OK, but now my phone won't work. Ican see my phone number, but there's no signal and no EDGE.
PLEASE help!!!

ok, so i did another hard reboot and the phone is back, but now the wifi stopped working. what gives?

Similar Messages

A bad experience with Lenovo repair service...got more problems now than when I brought it in

Paragraphs with ** may be skipped if you just want the short and sweet version:
**I bought my X61 in April 2008 and everything was great. I loved the laptop except for one thing: it had an extremely tight PC slot (although it was completely functional). I had a difficult time inserting my PCMCIA soundblaster sound card and removing it was even more difficult. I literally had to brace the laptop between my left arm and chest and manually pull the card out because it was so tight. I am an university student so I did not have time to deal with that problem because it was during final exams. I finally found some time recently to bring my laptop for repair. I called Lenovo and they recommended me to bring it in to my city's authorized business partner repair shop because they said it would be faster. So that is what I did. It turns out that they have to replace the system board because the PCMCIA slot was attached to it. In the end it took 3 trips (30 min drive each way) over a span of 2 weeks before I actually got my laptop fixed because the system board was backordered. Finally 2 days ago I got my laptop back and indeed, the PCMCIA slot is not tight anymore...yay! And that was when all the trouble started:
After bringing it home, I started to find more problems with the laptop than before I brought it in:
First thing I did was try to reactivate the TPM chip but it turns out that the TPM chip already had an owner. I found that strange and tried my previous passwords and none worked.
I can no longer output my display to my external LCD monitor. It doesn't work regardless of whether I plug the VGA cable directly to the laptop or via the Ultrabase 6. I know it's the not the cable because it works with my older laptop. I spent countless hours trying to figure this out and uninstalled and reinstalled several versions of Intel X3100 video driver as well as Thinkvantage Presentation Director. Even during boot-up it does not show up on my external monitor.
The Bios date/time and other settings get reset each time the external power is lost (e.g. remove battery or unplugging AC). This usually indicate that the computer CMOS battery is dead or bad.
From the above problems, I can only conclude that Lenovo sent a used defective system board. There could be other problems that I don't know about yet.
Initially I had tried to call Lenovo technical support (3x) and they were next to useless. The first time I called, the technician pretty much blew me off telling me that they can't help me and told me to search Lenovo support page for the answers to my problems. I couldn't believe it! Furthermore, I wanted to know how I can reset the TPM password and the first rep told me that that they would need to charge me for walking me through the steps. (in the end I figured it out on my own)
I am very dissatisfied with how things turned out. I know I now have to get my system board replaced again but this has been way more trouble than it is worth. I had spent many hours driving back and forth to the repair depot and even more hours troubleshooting the problem on my own because Lenovo support couldn't help me. It has completely destroyed my confidence in Lenovo. How can they be doing repairs with defective used parts??? What options do I have?
Message Edited by tallshorty on 06-15-2008 11:46 AM
Message Edited by tallshorty on 06-15-2008 11:50 AM

Tallshorty,
Wow! Apologies for such an experience. First, could you send me a PM with your contact information, your system model & serial #, and your service case number(s) if you have them handy? I will ensure you get some help.
Secondly, service parts may be new or refurbished. - Sorry to hear about this TPM problem - we can look into the process to ensure this is tested for, and ensure this does not happen, although it sounds like you've solved this part.
Thanks for sharing your story.
Mark
Message Edited by Mark_Lenovo on 06-18-2008 09:41 AM
Message Edited by Mark_Lenovo on 06-18-2008 11:59 AM
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

MORE PROBLEMS -NOW CANNOT SEND OR RECEIVE EMAILS A...

Not been able to send or receive emails the whole day and still cant -11pm now !
Had remote assistance helping from Newcastle earlier as when trying to receive or send it keeps asking for password -then it went to BT help and it told me it was the wrong password !?? Never touched it since it was set up -no,idea why it would be wrong ????
I then rang up for help -the guy took over my computer and advised me to change my password -done that -no joy . Topld me to wait and he would ring back in 20 mins-rang back in 40 mins and still not working -tried everything -still not working.
Then he said the servers were down and no idea when it would be working !!!
Still cannot send or receive emails and its now 11pm !!!
I had emails i was waiting for and not received .
What do we actually pay for and what do we actually get ???????
More hassle every day thats all.
Had more problems with BT in the last few months since joining than Tiscali -and that really is scraping the bottom !
Just checked the fault reports -guess what -NOTHING FOR THIS AREA -ALL FAULTS RESOLVED !
NOT MINE THOUGH !!!!
I HAVE HAD ENOUGH -I HAVE HAD TO CHANGE MY PASSWORD AS COULDNT RECEIVE EMAILS OR SEND THEM - CHANGED IT AND STILL CANNOT SEND OR RECEIVE THEM -ABSOLUTELY WELL AND TRULY P----ED OFF !

gb1957 wrote:
Not been able to send or receive emails the whole day and still cant -11pm now !
Had remote assistance helping from Newcastle earlier as when trying to receive or send it keeps asking for password -then it went to BT help and it told me it was the wrong password !?? Never touched it since it was set up -no,idea why it would be wrong ????
I then rang up for help -the guy took over my computer and advised me to change my password -done that -no joy . Topld me to wait and he would ring back in 20 mins-rang back in 40 mins and still not working -tried everything -still not working.
Then he said the servers were down and no idea when it would be working !!!
Still cannot send or receive emails and its now 11pm !!!
I had emails i was waiting for and not received .
What do we actually pay for and what do we actually get ???????
More hassle every day thats all.
Had more problems with BT in the last few months since joining than Tiscali -and that really is scraping the bottom !
Just checked the fault reports -guess what -NOTHING FOR THIS AREA -ALL FAULTS RESOLVED !
NOT MINE THOUGH !!!!
I HAVE HAD ENOUGH -I HAVE HAD TO CHANGE MY PASSWORD AS COULDNT RECEIVE EMAILS OR SEND THEM - CHANGED IT AND STILL CANNOT SEND OR RECEIVE THEM -ABSOLUTELY WELL AND TRULY P----ED OFF !
Hi.
This sounds like one of the fleeting account problems that can happen from time to time, changing the password doesn't do anything and will not help.
Unfortunately it can last for a few days, so best to keep trying every few hours.
There are probaby a few reasons for this, including local anti-virus or other security programs interferring. Sometimes a router power cycle can help, by getting a new IP address in case the one you've curently got has gone stale.
Are you able to login via webmail ? (or was this actually via webmail rather than something like Outlook or Thunderbird ?).
If the servers were down, then it would affect millions of people, and there would be masses of reports.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Even more problems now with itunes

is anyone eles computer freezing everytime you try and open itunes also, and if yours has how did you get it to stop

Hello trehy,
Try launching iTunes first, then connect your iPod.
Good luck.

Major problems with BT infinity and now no service...

Hi all,
I've been a BT customer for a while. I moved from Virgin Media and found BT to be fantastic. It was fast, reliable, decently priced and I was very satisifed as a customer. I used to recommend them to everyone. Sadly I am currently experiencing the worst of BT. It's not their products letting me down, it's a problem with customer services.
I had BT Infinity 2, Youview and a telephone package at home. I paid for my line rental up front and all was well. I was about to move home and so I contacted BT in plenty of time to advise of this. The new place didn't have a phone line but they offered to wave connection charges if I signed up to a new contract. No issues and I was happy.
Plans changed and I ended up not moving house. I called BT to cancel my home move. They understood fully and said that despite the service being stopped at my home they would reinstate it and cancel the installation at the other address. All good so far.
A day or so later I had a phone line, with a different phone number sadly, and BT Infinity back on at my current home address. Brilliant! I was happy.
A few days passed and I received a call from a BT engineer. He was outside the address I was at one point going to be moving to. I explained I didn't want the service installing there because I had not moved afterall and that BT were aware of this. He apologised and said he'd sort it. Sadly a few days later another engineer called from outside the address again. This happened a total of THREE times - so anyone waiting a while for BT engineers to install or fix your service, perhaps this is a reason as to why you're waiting so long with three cancelled appointments going to waste!
Finally I stopped getting the calls. I was told by customer services that my phone number would change back to my original number in a few days and that I could sit back and relax and nothing else would need doin. Lovely. Unfortunately that wasn't the case.
A week or so later the Infinity broadband stopped working.
I checked with BT, they told me that I had not had Infinity broadband since the cancelled move. I told them I had and that it was sorted by one of their overseas call centres, but they insisted I hadn't had it and that whatever this person overseas had done it wasn't right.
At the time of having the broadband it was coming through the Infinity port, in to an Infinity modem and in to the homehub 3 via the Infinity port. On top of that I was getting around 35-37Mb/s which is about right for the area I live in for Infinity. And finally, a few IP and speed checks at the time had confirmed I was indeed on BT Infinity. Despite all this the lady on the phone insisted it wasn't possible for this to have happened and I must have been mistaken!! Look at the facts, they speak for themselves.
BT then advised me that they had to now cancel all my services which would take at least 24 hours. Then I'd have to wait until Monday because nothing is done over the weekend, for a new order to be placed. I would receive a call on Monday, which to be fair they made and kept their word.
Now I'm in the situation where BT are sending out an engineer to install BT ADSL to my address. This will be a temporary thing for a week or so while they arrange to fit BT Infinity to my address! I pointed out this was a pointless exervise as my house has Infinity but they just turned it off recently after it working for a week or so. They ignored this until I pointed out I was using Infinity equipment and not ADSL equipment. Now they've said they'll send Microfilters to my address and I can remove the Infinity modem until they reinstall Infinity.
Add to the above that at one point I was also without a phone for a while and spent around 2 hours on hold in total on my mobile phone, which I get charged for, and you can see why I am quickly losing faith in BT. They've managed to turn me from a customer who loved their products to one who dispairs at the thought of having to spend yet more time on the phone to deal with a problem that BT actually appear to have created by not knowing what each department has done.
Each call I hear terms such as 'off line team' 'sales team' ' new order team' and I keep getting passed to different departments. I had at one point a call from BT on my mobile while I was on my landline and the lady on the mobile told me to hang up on the lady on the landline! They can't even be civil with each other it seems!
So here I am, stuck without internet and with a phone number that I don't recognise. My original number rings, but not at my house. Anyone calling me never gets an answer, where ever it actually rings.
Today I was told this whole problem is going to take yet another week, until at least a week today! And even then the solution at that point will be a temporary ADSL connection, not the Infinity product that I pay for.
The overseas call centre appeared to have it all sorted. Infinity was back, my phone was meant to change in a day or two. Then the UK team got hold of it, cancelled Infinity, ordered ADSL, turned it all off for at least two weeks and apologised a few times.
Although people are polite on the phone and I respect they are trying to help individually, nobody has taken ownership of my problem. I am passed from team to team, churned out the same lines on each follow up call and each time the delay gets longer and longer without actually getting the service I'm meant to have. This is appauling customer service.
Can someone at BT PLEASE sort out my account and turn on my services? It appears that everything physically works, but people keep turning things off for some reason and then doubting me when I say it was working.

Hi pebbleheed,
Welcome to the community and thanks for posting! Your post doesn't make great reading to be perfectly honest!
I can help sort everything out from here. To get in touch, click on my username and under the section "about me" you'll see the link to "contact the mods".
Please include a link to this thread when you complete the form and whenever we've received your details we'll take it from there.
Thanks a million,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

HT4623 Could not activate cellular data network. You are not subscribed to a cellular data service" "Cellular Data Plan Usage-There is no data remaining on your current plan. Would you like to add more data now?"what is the best thing i can do with this p

Could not activate cellular data network. You are not subscribed to a cellular data service"
"Cellular Data Plan Usage…There is no data remaining on your current plan. Would you like to add more data now?"what im going to do whit this problem??

I have done that and it is definitely on. My husband has the exact same phone and I upgraded his IOS at the same time, but this problem is not happening to his phone (we are also on the same plan, so our service should be the same). Our settings appear to be identical and my phone is showing the 3G symbol at the top, so I can't understand why it won't access the network.
I've turned it on and off twice and have reset all settings with my iTunes account, but it still isn't working.
I'm not a complete idiot with this sort of stuff - I have tried all the obvious things.

Hi, I download the latest version of itunes and i have problem now to sync my iphone with my computer, I have windows 7 home premium service pack 1, can somebody tell me how to fix it. thanks

Hi, I download the latest version of itunes and i have problem now to sync my iphone with my computer, I have windows 7 home premium service pack 1, can somebody tell me how to fix it. thanks

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Regards.

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup from last Friday, I go to my Lightroom Backups folder - and the most recent one showing not only isn't yesterday, it's OCTOBER 28 !?? Where the hell are the daily backups between October 28 and November 14?

Oh wow - JET LAG strikes agin - my apologies; I have located the missing weeks of back-ups. After getting home from a 30-day trip to Europe, I had changed the location of my LR catalog back-ups to an external drive, and forgot that I did that. I have found them, and all is good. Never operate Heavy Machinery without enough rest. Cheers

HT4623 i updated my IOS on my i[hone and now i cannot use my iphone again. i just dont understand why u guys would make something to add more problems to users

My iphone is not working anymore, I cannot see anything i once had on it after uodating it via itune when connecting it to my laptop.
If I had known, i would never have downloaded the update.
You guys are causing more problem than help.
Guess its time for me to go and buy samsung. You guys are making your product more difficult to use and causing more harm than good. How can I get back all my data now?

If you are so unhappy, leave. No one here cares.
There are no Apple employees here, we are all users like yourself.
Now if you would like to drop the attitude and clearly explain the issue that is occurring, we will do our best to help get the device functional again.

"Your iMac was restarted because of a problem" occurring more frequently now...

Unsure whether it has anything to do with upgrading to OS X Mavericks, but my iMac has been crashing a lot more frequently these days. I'm not talking about 4 -5 crashes a day, but at times, 3 - 4 occurrences a week. First I didn't think much of it. But since the crashing has become more frequent now, I have have just decided to copy the most recent crash report, which occurred about half an hour ago and is as follows:
iMac CRASH REPORT DEC 03, 2013 2:37 AM: Anonymous UUID:       8B8A5FAD-FF93-6E4E-95F5-EE21AFDB9A23 Tue Dec 3 02:27:27 2013panic(cpu 0 caller 0xffffff800ecdc19e): Kernel trap at 0xffffef7f90612808, type 14=page fault, registers:CR0: 0x0000000080010033, CR2: 0xffffef7f90612808, CR3: 0x000000003b303000, CR4: 0x0000000000000660RAX: 0xffffff80dafc1000, RBX: 0x00000000ffffffff, RCX: 0x0000000000000028, RDX: 0xffffff80236cc5e8RSP: 0xffffff801be5bb78, RBP: 0xffffff801be5bb90, RSI: 0xffffff80223a8a84, RDI: 0xffffff80dafc1000R8: 0xffffff801be5bbb8, R9: 0x0000000000000000, R10: 0xffffff80223a8a84, R11: 0xffffef7f90612808R12: 0x0000000000000000, R13: 0x0000000000000000, R14: 0xffffff7f90698d50, R15: 0xffffff801be5bc80RFL: 0x0000000000010246, RIP: 0xffffef7f90612808, CS: 0x0000000000000008, SS: 0x0000000000000010Fault CR2: 0xffffef7f90612808, Error code: 0x0000000000000010, Fault CPU: 0x0 Backtrace (CPU 0), Frame : Return Address0xffffff801be5b800 : 0xffffff800ec22f69 0xffffff801be5b880 : 0xffffff800ecdc19e 0xffffff801be5ba50 : 0xffffff800ecf3606 0xffffff801be5ba70 : 0xffffef7f90612808 0xffffff801be5bb90 : 0xffffff800f0cd83e 0xffffff801be5bbf0 : 0xffffff800f0cb28f 0xffffff801be5bd40 : 0xffffff800ecb6008 0xffffff801be5be50 : 0xffffff800ec26bb1 0xffffff801be5be80 : 0xffffff800ec139b5 0xffffff801be5bef0 : 0xffffff800ec1e003 0xffffff801be5bf70 : 0xffffff800ecc921d 0xffffff801be5bfb0 : 0xffffff800ecf3e26 BSD process name corresponding to current thread: WindowServer Mac OS version:13A603 Kernel version:Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393Kernel slide:     0x000000000ea00000Kernel text base: 0xffffff800ec00000System model name: iMac9,1 (Mac-F2218FA9) System uptime in nanoseconds: 26826506840522last loaded kext at 569282142986: com.apple.filesystems.smbfs    2.0.0 (addr 0xffffff7f91009000, size 335872)last unloaded kext at 493751865296: com.apple.filesystems.msdosfs    1.9 (addr 0xffffff7f91009000, size 57344) loaded kexts:com.Cycling74.driver.WondershareAudioDevice    1.5.2com.hzsystems.terminus.driver    4net.telestream.driver.TelestreamAudio    1.0.5com.Cycling74.driver.Soundflower    1.5.2com.globaldelight.driver.BoomDevice    1.1com.smashart.driver.AirPhonesSpeakers    1.0com.apple.filesystems.smbfs    2.0.0com.apple.driver.AppleBluetoothMultitouch    80.14com.apple.driver.AppleHWSensor    1.9.5d0com.apple.driver.AGPM    100.14.11com.apple.iokit.IOUserEthernet    1.0.0d1com.apple.iokit.IOBluetoothSerialManager    4.2.0f6com.apple.Dont_Steal_Mac_OS_X    7.0.0com.apple.filesystems.autofs    3.0com.apple.driver.AudioAUUC    1.60com.apple.driver.AppleMikeyHIDDriver    124com.apple.driver.AppleHDA    2.5.2fc2com.apple.driver.AppleLPC    1.7.0com.apple.GeForceTesla    8.1.8com.apple.driver.AppleHWAccess    1com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0com.apple.driver.AppleMikeyDriver    2.5.2fc2com.apple.driver.AppleUpstreamUserClient    3.5.13com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.2.0f6com.apple.driver.AppleBacklight    170.3.5com.apple.driver.AppleMCCSControl    1.1.12com.apple.driver.AppleIRController    325.7com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1com.apple.BootCache    35com.apple.iokit.SCSITaskUserClient    3.6.0com.apple.driver.XsanFilter    404com.apple.iokit.IOAHCIBlockStorage    2.4.0com.apple.driver.AppleUSBHub    650.4.4com.apple.driver.AppleFWOHCI    4.9.9com.apple.driver.AirPort.Brcm4331    700.20.22com.apple.driver.AppleAHCIPort    2.9.5com.apple.nvenet    2.0.21com.apple.driver.AppleUSBEHCI    650.4.1com.apple.driver.AppleUSBOHCI    650.4.1com.apple.driver.AppleRTC    2.0com.apple.driver.AppleHPET    1.8com.apple.driver.AppleACPIButtons    2.0com.apple.driver.AppleSMBIOS    2.0com.apple.driver.AppleACPIEC    2.0com.apple.driver.AppleAPIC    1.7com.apple.driver.AppleIntelCPUPowerManagementClient    216.0.0com.apple.nke.applicationfirewall    153com.apple.security.quarantine    3com.apple.driver.AppleIntelCPUPowerManagement    216.0.0com.apple.driver.IOBluetoothHIDDriver    4.2.0f6com.apple.driver.AppleMultitouchDriver    245.13com.apple.AppleGraphicsDeviceControl    3.4.12com.apple.iokit.IOSurface    91com.apple.iokit.IOSerialFamily    10.0.7com.apple.iokit.IOBluetoothFamily    4.2.0f6com.apple.kext.triggers    1.0com.apple.driver.DspFuncLib    2.5.2fc2com.apple.vecLib.kext    1.0.0com.apple.nvidia.classic.NVDANV50HalTesla    8.1.8com.apple.driver.IOPlatformPluginLegacy    1.0.0com.apple.driver.IOPlatformPluginFamily    5.5.1d27com.apple.driver.AppleSMBusPCI    1.0.12d1com.apple.driver.AppleHDAController    2.5.2fc2com.apple.iokit.IOHDAFamily    2.5.2fc2com.apple.nvidia.classic.NVDAResmanTesla    8.1.8com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.2.0f6com.apple.iokit.IOFireWireIP    2.2.5com.apple.driver.AppleUSBAudio    2.9.3f17com.apple.iokit.IOAudioFamily    1.9.4fc11com.apple.kext.OSvKernDSPLib    1.14com.apple.driver.AppleSMC    3.1.6d1com.apple.driver.AppleBacklightExpert    1.0.4com.apple.driver.AppleSMBusController    1.0.11d1com.apple.iokit.IONDRVSupport    2.3.6com.apple.iokit.IOGraphicsFamily    2.3.6com.apple.iokit.IOUSBHIDDriver    650.4.4com.apple.driver.AppleUSBMergeNub    650.4.0com.apple.iokit.IOSCSIBlockCommandsDevice    3.6.0com.apple.iokit.IOUSBMassStorageClass    3.6.0com.apple.driver.AppleUSBComposite    650.4.0com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.6.0com.apple.iokit.IOBDStorageFamily    1.7com.apple.iokit.IODVDStorageFamily    1.7.1com.apple.iokit.IOCDStorageFamily    1.7.1com.apple.iokit.IOAHCISerialATAPI    2.6.0com.apple.iokit.IOSCSIArchitectureModelFamily    3.6.0com.apple.iokit.IOUSBUserClient    650.4.4com.apple.iokit.IOFireWireFamily    4.5.5com.apple.iokit.IO80211Family    600.34com.apple.iokit.IOAHCIFamily    2.6.0com.apple.iokit.IONetworkingFamily    3.2com.apple.iokit.IOUSBFamily    650.4.4com.apple.driver.NVSMU    2.2.9com.apple.driver.AppleEFINVRAM    2.0com.apple.driver.AppleEFIRuntime    2.0com.apple.iokit.IOHIDFamily    2.0.0com.apple.iokit.IOSMBusFamily    1.1com.apple.security.sandbox    278.10com.apple.kext.AppleMatch    1.0.0d1com.apple.security.TMSafetyNet    7com.apple.driver.AppleKeyStore    2com.apple.driver.DiskImages    371.1com.apple.iokit.IOStorageFamily    1.9com.apple.iokit.IOReportFamily    21com.apple.driver.AppleFDEKeyStore    28.30com.apple.driver.AppleACPIPlatform    2.0com.apple.iokit.IOPCIFamily    2.8com.apple.iokit.IOACPIFamily    1.4com.apple.kec.pthread    1com.apple.kec.corecrypto    1.0Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 2.66 GHz, 8 GB, SMC 1.45f0Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MBMemory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A54463531323634485A2D3147344D31Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A54463531323634485A2D3147344D31AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.22)Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 3 incoming serial portsNetwork Service: AirPort, AirPort, en1Serial ATA Device: WDC WD6400AAKS-40H2B0, 640.14 GBSerial ATA Device: OPTIARC DVD RW AD-5670SUSB Device: Built-in iSightUSB Device: My Passport 0748USB Device: Rocketfish HD WebcamUSB Device: IR ReceiverUSB Device: Bose USB AudioUSB Device: BRCM2046 HubUSB Device: Bluetooth USB Host ControllerThunderbolt Bus:
My iMac is the early 2009 model. Would appreciate some help with deciphering this piece of info, or perhaps, guide me as to where I should be looking for info. Thanks in advance.

Hi,
So I uninstalled the programs I'm familiar with, from the list that thomas_r provided, namely:
     Wondershare
     Boom
     AirPhone speakers
I haven't experienced any crashing until earlier today. Crash report as follows:
Anonymous UUID:
8B8A5FAD-FF93-6E4E-95F5-EE21AFDB9A23
Mon Dec 30 04:17:51 2013
panic(cpu 0 caller 0xffffff801fedc19e): Kernel trap at 0xffffff801fe3a122, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffef8108223ff8, CR3: 0x0000000022c33000, CR4: 0x0000000000000660
RAX: 0x0000000000004000, RBX: 0xffffef8108220000, RCX: 0xffffff8108230000, RDX: 0xffffff8032688460
RSP: 0xffffff8108203e00, RBP: 0xffffff8108203e10, RSI: 0x000000002789ac07, RDI: 0xffffff8020489360
R8: 0x0000000000000004, R9: 0xffffff80352a3490, R10: 0x00000000000003ff, R11: 0xffffffffffffffff
R12: 0xffffff80328522a8, R13: 0xffffff8020489cd0, R14: 0x0000000000000000, R15: 0xffffff80328522a8
RFL: 0x0000000000010082, RIP: 0xffffff801fe3a122, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffef8108223ff8, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff8108203a90 : 0xffffff801fe22f69
0xffffff8108203b10 : 0xffffff801fedc19e
0xffffff8108203ce0 : 0xffffff801fef3606
0xffffff8108203d00 : 0xffffff801fe3a122
0xffffff8108203e10 : 0xffffff801fe3a188
0xffffff8108203e30 : 0xffffff801fe456c3
0xffffff8108203e60 : 0xffffff801fe486d9
0xffffff8108203e90 : 0xffffff801fe4853e
0xffffff8108203ec0 : 0xffffff801fe20b53
0xffffff8108203ef0 : 0xffffff801fe47a2c
0xffffff8108203f20 : 0xffffff801fe4a4be
0xffffff8108203fb0 : 0xffffff801fed6aa7
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:
0x000000001fc00000
Kernel text base: 0xffffff801fe00000
System model name: iMac9,1 (Mac-F2218FA9)
System uptime in nanoseconds: 54030898226038
last loaded kext at 1593152537510: com.apple.macos.driver.AppleUSBEthernetHost
7.0 (addr 0xffffff7fa2200000, size 28672)
last unloaded kext at 1665240546986: com.apple.macos.driver.AppleUSBEthernetHost
7.0 (addr 0xffffff7fa2200000, size 20480)
loaded kexts:
com.hzsystems.terminus.driver
4
net.telestream.driver.TelestreamAudio
1.0.5
com.Cycling74.driver.Soundflower
1.5.2
com.globaldelight.driver.BoomDevice
1.1
com.smashart.driver.AirPhonesSpeakers
1.0
com.apple.filesystems.smbfs
2.0.0
com.apple.filesystems.afpfs
11.0
com.apple.nke.asp-tcp
8.0.0
com.apple.driver.AppleBluetoothMultitouch
80.14
com.apple.driver.AppleHWSensor
1.9.5d0
com.apple.driver.AGPM
100.14.11
com.apple.iokit.IOUserEthernet
1.0.0d1
com.apple.iokit.IOBluetoothSerialManager
4.2.0f6
com.apple.Dont_Steal_Mac_OS_X
7.0.0
com.apple.filesystems.autofs
3.0
com.apple.driver.AudioAUUC
1.60
com.apple.driver.AppleMikeyHIDDriver
124
com.apple.driver.AppleHDA
2.5.3fc1
com.apple.driver.ACPI_SMC_PlatformPlugin
1.0.0
com.apple.driver.AppleMikeyDriver
2.5.3fc1
com.apple.driver.AppleBacklight
170.3.5
com.apple.GeForceTesla
8.1.8
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
4.2.0f6
com.apple.driver.AppleHWAccess
1
com.apple.driver.AppleLPC
1.7.0
com.apple.driver.AppleUpstreamUserClient
3.5.13
com.apple.driver.AppleMCCSControl
1.1.12
com.apple.driver.AppleIRController
325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
1.0.0d1
com.apple.BootCache
35
com.apple.iokit.SCSITaskUserClient
3.6.0
com.apple.driver.XsanFilter
404
com.apple.iokit.IOAHCIBlockStorage
2.4.0
com.apple.driver.AppleUSBHub
650.4.4
com.apple.driver.AirPort.Brcm4331
700.20.22
com.apple.driver.AppleFWOHCI
4.9.9
com.apple.driver.AppleAHCIPort
2.9.5
com.apple.nvenet
2.0.21
com.apple.driver.AppleUSBEHCI
650.4.1
com.apple.driver.AppleUSBOHCI
650.4.1
com.apple.driver.AppleRTC
2.0
com.apple.driver.AppleHPET
1.8
com.apple.driver.AppleACPIButtons
2.0
com.apple.driver.AppleSMBIOS
2.0
com.apple.driver.AppleACPIEC
2.0
com.apple.driver.AppleAPIC
1.7
com.apple.driver.AppleIntelCPUPowerManagementClient
216.0.0
com.apple.nke.applicationfirewall
153
com.apple.security.quarantine
3
com.apple.driver.AppleIntelCPUPowerManagement
216.0.0
com.apple.security.SecureRemotePassword
1.0
com.apple.driver.AppleMultitouchDriver
245.13
com.apple.driver.IOBluetoothHIDDriver
4.2.0f6
com.apple.AppleGraphicsDeviceControl
3.4.12
com.apple.iokit.IOSurface
91
com.apple.iokit.IOSerialFamily
10.0.7
com.apple.iokit.IOBluetoothFamily
4.2.0f6
com.apple.kext.triggers
1.0
com.apple.driver.DspFuncLib
2.5.3fc1
com.apple.vecLib.kext
1.0.0
com.apple.driver.AppleHDAController
2.5.3fc1
com.apple.iokit.IOHDAFamily
2.5.3fc1
com.apple.driver.AppleSMC
3.1.6d1
com.apple.driver.IOPlatformPluginLegacy
1.0.0
com.apple.driver.AppleSMBusPCI
1.0.12d1
com.apple.driver.AppleBacklightExpert
1.0.4
com.apple.iokit.IOFireWireIP
2.2.5
com.apple.iokit.IOBluetoothHostControllerUSBTransport
4.2.0f6
com.apple.driver.AppleUSBAudio
2.9.3f17
com.apple.iokit.IOAudioFamily
1.9.4fc11
com.apple.kext.OSvKernDSPLib
1.14
com.apple.driver.IOPlatformPluginFamily
5.5.1d27
com.apple.nvidia.classic.NVDANV50HalTesla
8.1.8
com.apple.driver.AppleSMBusController
1.0.11d1
com.apple.nvidia.classic.NVDAResmanTesla
8.1.8
com.apple.iokit.IONDRVSupport
2.3.6
com.apple.iokit.IOGraphicsFamily
2.3.6
com.apple.driver.CoreStorage
380
com.apple.iokit.IOUSBHIDDriver
650.4.4
com.apple.driver.AppleUSBMergeNub
650.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice
3.6.0
com.apple.iokit.IOUSBMassStorageClass
3.6.0
com.apple.driver.AppleUSBComposite
650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice
3.6.0
com.apple.iokit.IOBDStorageFamily
1.7
com.apple.iokit.IODVDStorageFamily
1.7.1
com.apple.iokit.IOCDStorageFamily
1.7.1
com.apple.iokit.IOAHCISerialATAPI
2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily
3.6.0
com.apple.iokit.IOUSBUserClient
650.4.4
com.apple.iokit.IO80211Family
600.34
com.apple.iokit.IOFireWireFamily
4.5.5
com.apple.iokit.IOAHCIFamily
2.6.0
com.apple.iokit.IONetworkingFamily
3.2
com.apple.driver.NVSMU
2.2.9
com.apple.iokit.IOUSBFamily
650.4.4
com.apple.driver.AppleEFINVRAM
2.0
com.apple.driver.AppleEFIRuntime
2.0
com.apple.iokit.IOHIDFamily
2.0.0
com.apple.iokit.IOSMBusFamily
1.1
com.apple.security.sandbox
278.10
com.apple.kext.AppleMatch
1.0.0d1
com.apple.security.TMSafetyNet
7
com.apple.driver.AppleKeyStore
2
com.apple.driver.DiskImages
371.1
com.apple.iokit.IOStorageFamily
1.9
com.apple.iokit.IOReportFamily
21
com.apple.driver.AppleFDEKeyStore
28.30
com.apple.driver.AppleACPIPlatform
2.0
com.apple.iokit.IOPCIFamily
2.8
com.apple.iokit.IOACPIFamily
1.4
com.apple.kec.pthread
1
com.apple.kec.corecrypto
1.0
Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 2.66 GHz, 8 GB, SMC 1.45f0
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A54463531323634485A2D3147344D31
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A54463531323634485A2D3147344D31
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 3 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD6400AAKS-40H2B0, 640.14 GB
Serial ATA Device: OPTIARC DVD RW AD-5670S
USB Device: Built-in iSight
USB Device: My Passport 0748
USB Device: Rocketfish HD Webcam
USB Device: Bose USB Audio
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
Thunderbolt Bus:
However, I still see the kexts for Boom and AirPhoneSpeakers. I also want to add that both Boom and AirPhoneSpeakers didn't have an uninstaller available. Wondershare did. Instead, I used AppZapper to uninstall these apps.    Is that the reason why I still see the kexts for these programs?
Apps for the following kexts are not available in my computer:
     com.hzsystems.terminus.driver
     net.telestream.driver.TelestreamAudio
     com.Cycling74.driver.Soundflower
Is there any way to rid of these kexts other than uninstalling? What about for apps without it's own uninstaller?
Please advise. Thank you.

My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays .

My iPod Touch keeps displaying the message 'This accessory not supported by iPod touch.' When I've used it w/this device multiple times, it's happening more and more frequently now. Anyway to dismiss this message for good? Because the iPod still plays thru my radio and system.

That message is usually due to a bad cable.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod

I've been through this, request information when we have a version of Siri in Portuguese (Brazil). No more for now and make sure your attention, I subscribe myself, gladly,

I've been through this, request information when we have a version of Siri in Portuguese (Brazil). No more for now and make sure your attention, I subscribe myself, gladly,

@farmwife25
After reading your post, I can certainly understand your concerns with this situation. I would love to assist you finding a resolution for your service issues in your home area. First, I'll need to ask you a few questions to help me in resolving.
In what zip code do you experience this problem? You mentioned service problems at your home. Do you get a signal when you're outside at this location? Have you spoken with our Technical Support Team regarding this issue in the past? And if so, was a resolution ticket filed for this issue on your behalf? Please let me know so that I can further assist. Thanks!
AnthonyTa_VZW
Follow us on Twitter @VZWSupport

With TSM adware removal tool I was able to remove unknown software that was making ads pop up when using Safari. So the y don't pop up anymore. The problem now is that when I open safari It is still downloading websites and after awhile it

With TSM adware removal tool I was able to remove unknown software that was making ads pop up when using Safari. So the y don't pop up anymore. The problem now is that when I open safari It is still downloading websites and after awhile it freezes the browser. I have to constantly go to Safari Preferences to remove them and then the browser will start working again. What can I do to stop this?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Hi, I have connected my iPhone 5 to iTunes, backed it up and then started the update but there was a problem, now my phone will not work, it asks to restore factory settings which I have tried 3 times, each time it says the device has an unknown error.

Hi, I have connected my iPhone 5 to iTunes, backed it up and then started the update but there was a problem, now my phone will not work, it asks to restore factory settings which I have tried 3 times, each time it says the device has an unknown error and the phone switches off. Please help.

Same thing happened with my iPhone 4S - no one is any help. Thanks Apple for such a crappy update! I've called Apple, they say the SIM card needs replacing, I go to my service provider they tell me nothing wrong with the SIM card - provider tells me I now need a new phone. Sheesh! If someone has a solution to this it would be greatly appreciated.

Changing the 'system' password, and now the service is denied to start??? (WLS 6.0)

I have been looking for awhile,.. and I haven't found this one yet..
I reinstalled weblogic.. (for reasons unmentionable, like deleting things
accidentally, etc.. )
I had the chance to specify a new system password. After realizing that it
likes to show me plain text when I start it via. scripts, or when it prompts
me.. plain text again, I chose to use the password 'password' instead of my
original "high security" password I had used. The problem now is that the
service that was installed is being denied access to start weblogic. It
seems to be using the old password. I can uninstallNtService, restart, and
installNtService, but it fails again. It's as if the password data is being
cached or stored somewhere. I'd like to change this!!....
I searched all the obvious places, (looking for plain text, of course) for
my old password,... the registry, WINNT, .. the wlogic6 folder.. Couldn't
find where it stores it. It's probably encrypted, though.. So.. my
question.
How do I change the password that the WebLogic service uses to startup
WebLogic?
Thanks is advance,
Sean Aitken
InterLan Technologies

tariqrehmani wrote:
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. ...
The iPhone 3G is Not Compatible with iOS 6...
It also appears that your phone may have been Hacked and / or Jailbroken...
If this is the case... you are out of luck... Because...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
Why Jailbreak is Not Supported > http://support.apple.com/kb/HT3743

More Problems - Now No Service!

Similar Messages

Maybe you are looking for