More problems with Services
I have two computers running 10.6.1. On both of them I have a couple of automator services installed that let me initiate calls through Google Voice.
On the MacBook, everything works fine and always has. On the iMac, however, the services stubbornly refuse to show up. Other services do show up, just not these.
Both installations were clean installs. Any ideas would be appreciated.
Yes, Growl is running. I have an OmniFocus service that shows up fine. The weird thing is that the two machines mirror each other exactly in terms of what is installed on each.
Does Growl have a history of interfering with other services?
Similar Messages
-
Problem with services hierarchy and purchase order
Hi I'm in Srm 7 EHP8(classic scenario) and i have a problem with services hierarchies:
I create a Purchase requisition in ECC with the next structure:
1.Hier
1.1 Serv1
1.2 Serv2
1.3 Serv3
Then I upload this PR to SRM(I activated the BBP_EXTLOCALPO_BADI to change to the Extended-classic scenario to upload correctly the hierarchy)
and in the SOCO I only choose the position 1.1 Serv1 and create a purchase order.
The problem is the purchase order created in ECC contain all the services of the purchase requisition, not only the service I choose(1.1 Serv1) to create the purchase order, in SRM the purchase order is correct with only one position(1.1 Serv1)
Any Idea?.
Thanks for the help.Hi,
I have the same problem, any new about that?
Rgs,
Pedro -
More Problems with iTunes 7,0
I, like many other people it seems, have been having problems with my iTunes ever since I downloaded the latest upgrade for it.
I downloaded iTunes 7.0 on September 16th late at night. After downloading the upgrade I turned my laptop off and thought nothing of it. As I shut down my laptop however, I noticed that I recieved an error message. Ignoring it for the moment, I let my laptop shut off.
When I turned my laptop on the next morning, I noticed that nothing was working. I recieved 3 more error messages, my iTunes would not open at all, my music would [obviously] not play, and for some reason it ended up turning the "Mute" function on on my laptop sound system. After turning that off iTunes still wouldn't open.
Now, following the advice of someone in this forum, I attempted to downgrade my version of iTunes back to 6.0 [or around there] Now at least my iTunes will open, but nothing will play. When I attempt to play a song the information will show up, but it simply will not play.
I'm beginning to get really frustrated with this entire situation. A simple upgrade to my iTunes should not compromise my ability to listen to my music, and even the ability of my laptop to function properly.
Any help or advice that could be given would be greatly appreciated.
Dell Inspiron 6400 Windows XP
Dell Inspiron 6400 Windows XP
Dell Inspiron 6400 Windows XPi downloaded the update and now my itunes wont even open.
a few questions before proceeding.
are you getting an error message? if so, what does it say? include error message numbers if you're getting any.
or are you getting no error messages whatsoever when you try to launch itunes?
if you're getting no error messages whatsoever, do you just see the wee hourglass for a few seconds, and then nothing? if so, do you also have Norton Internet Security 2005 installed on that PC?
or are you seeing a brief "flash" of the itunes license screen (and then nothing)? if so, do you also see similar behavior when you try to launch your QuickTime? -
More problems with iTunes 9.1.0.79
Hi,
since I have had my iPhone I have upgraded itunes a couple of times and never had any problems until now.
I upgraded to 9.1.0.79 two days ago and am having all sorts of issues.
Now when itunes starts it takes ages.
When my iphone is connected I get a message saying:-
+itunes cannot sync information with the iphone 'iphone' because syncing has been disabled on this computer+
I click the yes button to enable syncing and then receive an error message:-
+itunes was unable to load provider data from sync services reconnect or try again later+
I then click OK and my phone appears in the devices list.
These error messages happen every time I start itunes, so by me clicking the yes button to enable syncing does absolutely nothing.
My iphone will sync fine just that itunes tends to freeze up and is very slow.
I run a diagnostic from the help menu and without my iphone connected it shows a red dot next to 'No iPhone or iPod found', which is correct but when I have my iphone connected this red dot is now orange, what is the difference in colour?
I have turned of all anti-virus and firewall software but itunes is still the same, very unresponsive, so anti-virus/firewall is not the problem.
I followed to the letter:-
http://support.apple.com/kb/HT1925 and totally uninstalled everything and then reinstalled itunes only to find the same problem persisting.
This is definitely a problem with itune 9.1.0.79 and apple should be addressing it pronto.
Here is the data from the diagnostic run and it shows my iphone as not found even though it is connected, showing in devices and I can sync to it, wierd!!
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
To Be Filled By O.E.M. To Be Filled By O.E.M.
iTunes 9.1.0.79
QuickTime 7.6.6
FairPlay 1.7.16
Apple Application Support 1.2.1
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.0.0.102
Apple Mobile Device Driver 1.46.0.0
Bonjour 2.0.0.34 (214.3)
iTunes Serial Number **************
Current user is an administrator.
The current local date and time is 2010-04-12 20:39:07.
iTunes is not running in safe mode.
Video Display Information
ATI Radeon HD 2600 XT AGP
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 9.1.0.79 is currently running.
iTunesHelper 9.1.0.79 is currently running.
Apple Mobile Device service 3.0.0.0 is currently running.
Universal Serial Bus Controllers:
VIA Rev 5 or later USB Universal Host Controller. Device is working properly.
VIA USB Enhanced Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
VIA OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPhone 3GS running firmware version 3.1.3
Serial Number: *********
** iPhone/iPod touch Sync Tests **
Sync tests completed successfully.
I have blanked out serial numbers etc..
Regards..,
K :0(notice how under diagnostics readout it shows "most recent device not currently connected"
mine does same thing and i have iphone connected when i do it.
my problems also started with this update and i show 4 errors in event viewer which is under adminastrative tools in control panel.
MY problem is super slow backups for a 16gb 3Gs with 12gbs free. a backup used to be done in like 30-45 seconds now takes about 5 minutes and looks as if it stals at a few points when looking at bar at top of itunes.
my iphone shows up in itunes and shows all pages etc. i do everything manually although i do sync apps.
everytime i connect iphone and open itunes i get 4 errors thats show up only in event viewer (but anyone who maintains computers should be aware of all tools available to them to see whats going on in the background) that show up for "BONJOUR" i have posted this here and under bonjour forum. i turned off bonjour services the proper way again thrru adminastrative tools>services double click bonjour and change for "automatic to "disabled". don't do it through msconfig as some would tell you to do if it's a bonjour issue.
but checking out event viewer can give you valuable info so you don't do the apple nonsense wasting hours to clean up their messy installation only to have it do exact same thing again. it's obvoius they have a conflict.... now we can only hope for a resolution ie UPDATE if enough complain by sending them all this.
i don't have a jailbreak phone nor am i rebuilding anything i'll live with it till they fix it as my event viewer log isn't getting filled up with bonjour errors anymore nor do i need all this bloated crap apple sends our way... i do have quicktime pro. -
2010 to 2013 migration problem with service application
With a 3rd party migrator we are able to migrate a simple 2010 site to 2013. By simple UI level approach sites are migrated easily. But we have a large project where we have good amount of work done on various service applications.
We are facing problem to migrate entire 2nd SP2010 application with service applications. Do any one has idea of smooth migration of large service applications to 2013 with avepoint or quest tools?
If faced same problem then share steps.The Microsoft guidance for upgrading a SP2010 farm to SP2013 is in the link below. Most of your existing SharePoint out of the box service applications can be upgraded also. This includes User Profile Service Application and the Search Service Application.
Custom service applications most likely not upgradeable. Hopefully the guidance was followed so there should be no problems.
http://technet.microsoft.com/en-us/library/cc262483(v=office.15).aspx
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer -
WAE 512 and problem with services
Hi
I have few WAE 512 installed in my network. Every use 4.1.5b software. I have problem with one. I have upgraded it from CD and after that I see below alarms:
Directy after WAE restart appear:
Major: DRE (DRE+LZ) initialization failed: <>
after about 15 minutes other alarms appear:
Critical: nodemgr: The wafs_edge service has been disabled.
Critical: Edge is down.
Do you know where should I look for a problem source ?
Thanks in advance
JamesHi
Here you are the outpu:
ps. after 3 days these alarms disapeard. When I've restarted WAE alarm appeared and after 3 days desapered again....
Physical disk information:
disk00: Present 5QD39305 (h02 c00 i00 l00 - Int DAS-SATA)
715402MB(698.6GB)
disk01: Present 5QD392VR (h02 c00 i01 l00 - Int DAS-SATA)
715402MB(698.6GB)
Mounted file systems:
MOUNT POINT TYPE DEVICE SIZE INUSE FREE USE%
/sw internal /dev/md0 991MB 914MB 77MB 92%
/swstore internal /dev/md1 991MB 880MB 111MB 88%
/state internal /dev/md2 5951MB 256MB 5695MB 4%
/local/local1 SYSFS /dev/md5 14878MB 1277MB 13601MB 8%
/disk00-04 CONTENT /dev/md4 668196MB 119653MB 548543MB 17%
.../local1/spool PRINTSPOOL /dev/md6 991MB 16MB 975MB 1%
Software RAID devices:
DEVICE NAME TYPE STATUS PHYSICAL DEVICES AND STATUS
/dev/md0 RAID-1 NORMAL OPERATION disk00/00[GOOD] disk01/00[GOOD]
/dev/md1 RAID-1 NORMAL OPERATION disk00/01[GOOD] disk01/01[GOOD]
/dev/md2 RAID-1 NORMAL OPERATION disk00/02[GOOD] disk01/02[GOOD]
/dev/md3 RAID-1 NORMAL OPERATION disk00/03[GOOD] disk01/03[GOOD]
/dev/md4 RAID-1 NORMAL OPERATION disk00/04[GOOD] disk01/04[GOOD]
/dev/md5 RAID-1 NORMAL OPERATION disk00/05[GOOD] disk01/05[GOOD]
/dev/md6 RAID-1 NORMAL OPERATION disk00/06[GOOD] disk01/06[GOOD]
Disk encryption feature is disabled.
regards
James -
ACL messy duplicates causing problems with services
I have a network environment that is configured with open directory.
I have been having a persisting problem with on files on a shared drive that members of the open directory have been accessing/editing. The problem being that the permissions of that file (i.e. the ACLs) are all screwed up. The files can have multiple users and groups in the ACL (which is obviously ok) but each of those users and groups can repeat over 10 times in some circumstances.
The following is the result of a shell "ls -ale" of an offending directory:
-rwxr-xr-x@ 1 johnsmith workgroup 554496 28 Mar 10:58 My-File.xls
0: user:johnsmith inherited allow write,delete,append,writeattr,writeextattr,chown
1: user:johnsmith inherited allow write,delete,append,writeattr,writeextattr,chown
2: group:manager inherited allow read,write,execute,delete,append,readattr,writeattr,readextattr,writeextattr,re adsecurity
3: user:johnsmith inherited allow write,delete,append,writeattr,writeextattr,chown
4: group:manager inherited allow read,write,execute,delete,append,readattr,writeattr,readextattr,writeextattr,re adsecurity
5: user:johnsmith inherited allow write,delete,append,writeattr,writeextattr,chown
6: user:johnsmith inherited allow write,delete,append,writeattr,writeextattr,chown
7: group:manager inherited allow read,write,execute,delete,append,readattr,writeattr,readextattr,writeextattr,re adsecurity
8: group:manager inherited allow read,write,execute,delete,append,readattr,writeattr,readextattr,writeextattr,re adsecurity
9: user:johnsmith inherited allow write,delete,append,writeattr,writeextattr,chown
10: user:johnsmith inherited allow write,delete,append,writeattr,writeextattr,chown
11: user:johnsmith inherited allow write,delete,append,writeattr,writeextattr,chown
12: group:manager inherited allow read,write,execute,delete,append,readattr,writeattr,readextattr,writeextattr,re adsecurity
13: group:manager inherited allow read,write,execute,delete,append,readattr,writeattr,readextattr,writeextattr,re adsecurity
14: group:manager inherited allow read,write,execute,delete,append,readattr,writeattr,readextattr,writeextattr,re adsecurity
These files seem to affect services such as time machine running correctly and I would assume could also cause other issues.
I have tried stripping all ACLs from the devices and starting again... however the problem quickly returns.
Could somebody please shed some light on what may be happening and how I can fix it.Have a look at the topic:
http://discussions.apple.com/thread.jspa?threadID=2686643 -
More problems with frames DOH!
Hokay, so, here is my program:
import java.awt.*;
public class ShowAFrame
public static void main(String args[])
Frame f;
String myTitle;
myTitle = "Test";
f = new Frame();
f.setTitle(myTitle);
f.setSize(500,500);
f.setIconImage(new ImageIcon("c:/javaprograms/book2.gif").getImage());
f.show();
and here is my error message:
C:\JavaPrograms>javac ShowAFrame.java
ShowAFrame.java:13: cannot resolve symbol
symbol : class ImageIcon
location: class ShowAFrame
f.setIconImage(new ImageIcon("c:/javaprograms/book2.gif").getImage());
................................................... ^
1 error
I feel really stupid asking, but since this is a beginners forum, what am i doing wrong?
btw, the dots are added to manually move the carrot
Thankshint #1:
1) When it tells you: "ShowAFrame.java:13: cannot resolve symbol" it's saying that there's a problem with line #13, specifically, that there's a symbol that it doesn't understand.
2) Look at the carot. What's it pointing to?
Now, put 1 and 2 together. The compiler is telling you that there's a word on line 13 that it doesn't understand, and then it shows an arrow pointing to a word on line 13. Any guesses as to the culprit?
hint #2:
learn about import statments and their purpose -
One more Problem with SAP query
Hi All,
I am having a problem with SAP query
Execution of SAP query transaction is leading to Dump
the dump says Field 'R01' contains no fields, syntax check on the program shows same error.
When I tried regenerating the Query in SQ01
" Query Specification cannot be use to generate list
Ranked list contains only numeric fields
Please help meGianpiero Bucchieri wrote:
> So its important to listening the following tables too: Faktura (invoice), Partner Role, Partnernumber and the requierements number. The table are EKKO EKPO AND VRKPA OR vbkd, but if I join this table the query doesn't listining any results. If I cancel this 3 or 4 table and I start the query, the listening are ok.
>
I am not sure what business process you are describing here - is it some kind of third-party sales order? If so, your join is wrong.
From VB E P, firled BANFN and BNFPO you can go to table EBAN, where in field EBELN you will find the number of the purchase order (if somebody already had an MRP+Me58 run over the PR) which will lead you to table EKKO, and EKPO.
So what we have here (essentially is):
VBAK -> VBAP -> VBEP -> EBAN -> EKKO -> EKPO
But that only solves one of your problems - you still have a long way to go to get invoices, partner and partner roles into there and I am beginning to ask myself what exactly it is you want to evaluate.
Care to explain?
Edited by: Mylène Dorias on Apr 1, 2010 2:10 PM -
More problems with new itunes not starting
Hi,
Have recently downloaded upgrade of iTunes and experienced the same problems as a few others - no response when trying to start it up. I was very happy indeed yesterday when the Quicktime standalone fix worked and my music reappeared. However, on restarting today, it's back to the square one - no response! Am I doing something wrong or is there anyone who can help?
HP Windows XPI'm having the same problem on my desktop. I've done both a spyware search using ewido, and a virus check using symantec, neither of which helped. I tried uninstalling and re-installing and that also didn't help. Each time I try staring itunes I get the message:
iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.
I'd be happy to send the error report that I get along with this message.
Oddly enough, this problem is only occuring on one computer. I have no problem with it on my laptop. I hadn't updated itunes for a while on my desktop.
Windows XP -
I am having more problems with 10 for Mac than the old one. Al ot.
All sorts of problems. It gets stuck. They have actually appologized the first time I used it and I had to turn off computer. The latest was I couldn't upload a file in an online email. I didn't have problems with the old one which was quite old.
All sorts of problems. It gets stuck. They have actually appologized the first time I used it and I had to turn off computer. The latest was I couldn't upload a file in an online email. I didn't have problems with the old one which was quite old.
-
After spending 3 days trying to sync my Touch to itunes 7.6 i am having trouble getting the 1.1.3 update. Every time i try to do the update a box comes up saying that i need to connect to the internet even though i am. Getting very frustrated now. Would i be getting the same problems with a macbook?
Any help would be appretiated....The above is almost unreadable due to the run-on sentence and bad grammar/English.
What exactly is it that you would like from us, your fellow users, in these user to user support forums?
Apple is not here, they do not read or respond.
If you have an issue with Apple, contact Apple directly. -
Problem with services of SAP after installation of ABAP on MS SQL server
Hi,
I am trying top install 2004 Netweaver ABAP+ JAVA on my machine
Following is my machine configuration -
Machine type - Windows 2003 Standard Edition SP1
Machine name - pun-idmqa-vm1
SAP Instance name - QSA
DB type - MS SQL 2000 SP4 + hotfixes and instcoll.exe is executed. After nstalling SQL shows server proper as SQL_Latin1_General_CP850_BIN2 collation
Message port - 3600
I could sucessfully install Database from CD and thereby could sucessfully install ABAP. During postinstall I tried to start the server. all the following services got up -
msg_server.exe
disp+work.exe
igswd.exe
But after some time 2nd service goes down. Following is the error message flashed in
trc file: "dev_disp", trc level: 1, release: "640"
Mon Jul 02 16:33:16 2007
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 31
intno 20020600
make: multithreaded, Unicode
pid 2492
***LOG Q00=> DpSapEnvInit, DPStart (00 2492) [dpxxdisp.c 1100]
Mon Jul 02 16:33:17 2007
shared lib "dw_xml.dll" version 31 successfully loaded
shared lib "dw_xtc.dll" version 31 successfully loaded
shared lib "dw_stl.dll" version 31 successfully loaded
shared lib "dw_gui.dll" version 31 successfully loaded
Mon Jul 02 16:33:21 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 054B0040, size: 3192688)
DpShMCreate: allocated sys_adm at 054B0040
DpShMCreate: allocated wp_adm at 054B1B58
DpShMCreate: allocated tm_adm_list at 054B4478
DpShMCreate: allocated tm_adm at 054B44A0
DpShMCreate: allocated wp_ca_adm at 0575B0E8
DpShMCreate: allocated appc_ca_adm at 05760EA8
DpShMCreate: allocated comm_adm_list at 05762DE8
DpShMCreate: allocated comm_adm at 05762E00
DpShMCreate: allocated vmc_adm_list at 057A9AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 057A9AF8
DpShMCreate: allocated wall_adm at 057A9B00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
Mon Jul 02 16:33:22 2007
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1132 MB
<ES> 1131 blocks reserved for free list.
ES initialized.
Mon Jul 02 16:33:36 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
Mon Jul 02 16:33:38 2007
***LOG Q0K=> DpMsAttach, mscon ( pun-idmqa-vm1) [dpxxdisp.c 9719]
Mon Jul 02 16:33:46 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
Mon Jul 02 16:33:47 2007
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 31
Release check o.K.
Mon Jul 02 16:34:20 2007
ERROR => W0 (pid 2740) died [dpxxdisp.c 12170]
ERROR => W1 (pid 3736) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3876) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3896) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3852) died [dpxxdisp.c 12170]
ERROR => W5 (pid 2008) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3776) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 4052) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2740 (SIGUSR2)
ERROR => DpWpKill(2740, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3736 (SIGUSR2)
ERROR => DpWpKill(3736, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3876 (SIGUSR2)
ERROR => DpWpKill(3876, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-3896 (SIGUSR2)
ERROR => DpWpKill(3896, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3852 (SIGUSR2)
ERROR => DpWpKill(3852, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-2008 (SIGUSR2)
ERROR => DpWpKill(2008, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3776 (SIGUSR2)
ERROR => DpWpKill(3776, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-4052 (SIGUSR2)
ERROR => DpWpKill(4052, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:30 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Jul 02 11:04:30 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2740 Ended no 1 0 0
1 DIA 3736 Ended no 1 0 0
2 UPD 3876 Ended no 1 0 0
3 ENQ 3896 Ended no 1 0 0
4 BTC 3852 Ended no 1 0 0
5 BTC 2008 Ended no 1 0 0
6 SPO 3776 Ended no 1 0 0
7 UP2 4052 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jul 02 11:04:30 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Mon Jul 02 11:04:30 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jul 02 11:04:30 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:35 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3832) (SOFT_KILL)
Stop icman
killing process (3960) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3832 HANDLE:1600)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:36 2007
NiISelect: TIMEOUT occured (1000 ms)
Mon Jul 02 16:34:37 2007
[DpProcDied] Process died (PID:3832 HANDLE:1600)
[DpProcDied] Process died (PID:3960 HANDLE:1588)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'pun-idmqa-vm1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1608
MsIDetach: detach MS-system
Mon Jul 02 16:34:38 2007
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2492) [dpxxdisp.c 8478]
Good Bye .....
I am new to SAP EP installation. Please help me regarding this issue.
Thanks and Regards,
Smithaforgot to tell you, after that probably you will need to make the installation again.
good luck. -
SQL server 2005 problem with service starting
I am having a problem starting my sqlserver service. It will not start and therefore i have no access to my sql 2005 server database. This is what in the event log. This database was working fine until i had two drives kill over in a RAID configuration.
The striping went out with a hitch and no i want to see if anyone have any ideas before i perform a restore. Do i need to run SQL server repair with the installation disk?Well from viewing the log it looks like i am in a pickle. Since the SQL service won't start, is there a command or script to run for a database check using powershell? Since it looks like i will be doing a restore, just curious now.
2014-01-16 15:27:58.30 spid5s Starting up database 'master'.
2014-01-16 15:27:59.81 spid5s Error: 824, Severity: 24, State: 2.
2014-01-16 15:27:59.81 spid5s SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:363; actual 0:0). It occurred during a read of page (1:363) in database ID 1 at offset 0x000000002d6000 in file
'W:\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately.
Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
2014-01-16 15:27:59.81 spid6s Error: 922, Severity: 14, State: 1.
2014-01-16 15:27:59.81 spid6s Database 'master' is being recovered. Waiting until recovery is finished.
2014-01-16 15:27:59.81 spid6s System Task System Task produced an error that was not handled. Major: 9, Minor: 22, Severity:14, State:1
2014-01-16 15:27:59.81 spid5s Error: 3313, Severity: 21, State: 2.
2014-01-16 15:27:59.81 spid5s During redoing of a logged operation in database 'master', an error occurred at log record ID (2369:160:2). Typically, the specific failure is previously logged as an error in the Windows Event Log
service. Restore the database from a full backup, or repair the database.
2014-01-16 15:27:59.81 spid5s Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL
Server Books Online. -
Latest firmware update and more problems with 30" external displays?
Hello,
New macbook pro user since a few weeks, so first post here.
I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
Is anyone else in a similar situation after the latest update?Hello,
New macbook pro user since a few weeks, so first post here.
I'm aware of various issues with the displayport to dual-dvi adapter, especially with 30" 2560x1600 monitors. All threads I've found on are 1-3 years old though.
I got my 17" macbook pro a few weeks ago and I've had very few problems running my 30" dell 3008wfp as external screen. I had issues at times getting it to work after boot up, with blackout and various errors (problems I've read about in older threads), but once stable it would work without issues for days.
Yesterday the macbook found and installed a new firmware update, and wow, all **** broke lose. The external screen won't run at 2650x1600 for more than a minute before blacking out or suffering major graphical errors. Ironically one of the key points in the firmware update is better support for external monitors...
It will run nice and stable mirrored at 1920x1200, but not at 2650x1600.
Is anyone else in a similar situation after the latest update?
Maybe you are looking for
-
QM steps for customer return material (mvt 655)
Hi Qm Guru When material return from customer due to some defect (material defect some reason like moisture or rain).then material comes in quality inspection. As for example after Return from vendor (movement type 655) material comes in quality ins
-
Dynamic text in MDM notify workflow step
Hallo MDM Gurus, Do you know how to create a dynamic text in the MDM notify workflow step? I would like to insert some record informations in the text of this step. Any suggestion is helpful. Thank you. SB
-
Cs5 photoshop refund edge is bluring
cs5 photoshop refund edge is bluring. i did a fresch install of lion on osx and fresch install of cs5 and now the refind edge in photoshop make my pictures blurring. I delete fonts, delete brusches but still the refind edge make my pictures bad.
-
Use MacBook Pro as master and iMac as slave?
I have a mid-2007 iMac and a late 2013 MacBook Pro. I want to use the MacBook Pro as the storage unit and the iMac as the operating unit since the larger screen is easier on the eyes. How can easily connect them to transfer files back and forth easil
-
Hi, Can I create (based on custom condition - say 10% of the business transactions) SRM PO in classic scenario ? What configuration do I need to do ? Thank You Pranav