More reel weirdness

Hi Everyone -
So I have a few projects that I built on one machine and now I need to move to a new machine. Folder structure is exactly the same as it was on the original box - and preferences in terms of frame rate (everywhere you can enter frame rate) are exactly the same.
So when I open the .ircp on the new machine predicably all of my reels are offline - however when I try load from desktop I get the warning message that the frame rate of some of the reels doesn't match the current frame rate...blah blah blah.
What's even weirder is if I had the clips to a blank timeline they go in just find but if I try to rebuild or reload the reels from media thats online I get the same message.
This is extremly frustrating because I can't seem to move projects around from machine to machine. I've verified that all media is 23.976 and that all of my projects are also 23.976.
HELP!!!!

Safari preferences and Click To Flash have nothing to do with it, so deleting or removing those won't solve the problem. If I were you, I'd download the 10.6.2 Update and reinstall that, then Repair Disk Permissions and then restart Safari to see if the problem continues.

Similar Messages

More filtering weirdness

Hi all: I am still seeing an issue on our BM3.9sp2 box running on NW6.5sp8 and eDir 8.8.5.
I have two credit card machines, one in subnet 10.1.x.x and one in subnet 10.2.x.x which is across a wan. Here are the filters I setup:
10.1.x.x subnet
outbound
traffic: all_tcp
source: private - host: 10.1.1.98
Dest: public - any address
inbound
traffic: all_tcp
source: public - any address
Dest: private - host: 10.1.1.98
10.2.x.x subnet
outbound
traffic: all_tcp
source: private - host: 10.2.1.98
Dest: public - any address
inbound
traffic: all_tcp
source: public - any address
Dest: private - host: 10.2.1.98
The credit card machine in the 10.2.x.x subnet works fine while the machine in 10.1.x.x does not.
So I tried the old turn of ipflt and see if things work trick. Instantly both machines worked fine. So I turned ipflt back on and again only the one machine worked. For kicks I again turned of ipflt and guess what, only the one machine worked (10.2.x.x). The machine at 10.1.1.98 would not connect even with ipflt unloaded. I repeatedly retested and even with ipflt off the machine on 10.1.x.x would not connect.
Weird. Any thoughts? Thanks, Chris.

On 19/04/11 16:43, Chris wrote:
> Hi all: I am still seeing an issue on our BM3.9sp2 box running on
> NW6.5sp8 and eDir 8.8.5.
> I have two credit card machines, one in subnet 10.1.x.x and one in
> subnet 10.2.x.x which is across a wan. Here are the filters I setup:
> _10.1.x.x subnet_
> outbound
> traffic: all_tcp
> source: private - host: 10.1.1.98
> Dest: public - any address
> inbound
> traffic: all_tcp
> source: public - any address
> Dest: private - host: 10.1.1.98
> _10.2.x.x subnet_
> outbound
> traffic: all_tcp
> source: private - host: 10.2.1.98
> Dest: public - any address
> inbound
> traffic: all_tcp
> source: public - any address
> Dest: private - host: 10.2.1.98
> The credit card machine in the 10.2.x.x subnet works fine while the
> machine in 10.1.x.x does not.
> So I tried the old turn of ipflt and see if things work trick. Instantly
> both machines worked fine. So I turned ipflt back on and again only the
> one machine worked. For kicks I again turned of ipflt and guess what,
> only the one machine worked (10.2.x.x). The machine at 10.1.1.98 would
> not connect even with ipflt unloaded. I repeatedly retested and even
> with ipflt off the machine on 10.1.x.x would not connect.
> Weird. Any thoughts? Thanks, Chris.
1. If traffic is always started in one direction, then you only need one
filter and make it stateful.
2. Are you using imanager or filtcfg to create the filters? did you
check in filtcfg/configure interface options that the nics are correctly
defined s public and private?
3. If you unload ipflt and still fails, load pktscan.nlm on the server
and take a lan trace to see where the traffic fails.

More Sound Weirdness

I managed to connect external speakers to my MacPro (via the audio jack on the back of the machine) and finally figured out how to get them to work. And they work just fine except for this one problem.
Whenever I go to print a file, no matter what program I am printing from, I get a loud ping alert from the external speakers. It's not the sound I have selected for alerts. It's a different one. And it's obnoxiously loud. It happens for a few other computer functions as well. I'd like to turn it off - or at least dampen the volume - but I have tried every sound tweak I could find and nothing works.
Does anyone have any suggestions?

Nevermind.....
I went back and noodled around some more. Turns out the problem occurrs only in Microsoft Office applications and after fussing with the Help menu for a bit I finally figured out how to turn off the sound. (But, oddly, no way to keep the sound but lower the volume.)
Just in case someone else should have this problem: In Word go to Preferences (Note: a Word file must be open in order for you to do this). Then to General. Then clear the "Provide feedback with sound" checkbox.
Adios.

More multicam weirdness - CC

Okay... I have an unusual multicam with an even more unusual problem.
We are making short videos for a Spanish class. These are mostly three cameras with additional, non-sync audio for each of the main actors. Each video is shot in short takes with a little overlap that need to be put together in a multicam sequence.
I used the new audio sync feature to (successfully!) sync up about 70 files. They auto sorted into a dozen different multiclips and, for the most part, Premiere was close to perfect! This is wonderful since my Spanish is "no muy buena"!
I opened each of the multiclips in the timeline. It is important that I include the audio from each of the actors so I turned all of the relevant audio tracks on. I selected the best take from each multiclip and pasted these into a new sequence with the intent of making that into a multicam sequence the old fashioned way. I suspect this is my problem.
When I drag this new nest to the new item icon I get a single video and audio track and all of the audio tracks play at once (all very good). BUT when I enable the Multi-Camera most of the audio tracks (all of the useful ones) go away even though they were happily playing muxed in the nest before I enabled Multi-Camera!
Any ideas on why this is happening or how I could proceed differently? I'd really like to use the multi-camera feature but it will be difficult to edit each little piece and then bring it into a finished sequence.
Here are some screen grabs to help:
My original, hand-made, nest called "ALL_techshop"
The new item created when "ALL_techshop" is dragged onto the new item icon. All of the audio channels that I have turned on paly simultaneously
Enabling the Multi-Camera turns off all of the useful channels:

There may be a new cool simple way or button to take care of this, but if I understand your post correctly...did you try option+selecting just the video tracks only and then right-clicking and selecting "nest" then right-click again and select multi-camera>enable. That is how I used to do it on CS6 and it worked recently on CC. That way your video is nested all on one track but your audio remains untouched. I don't know why when you did it some of the tracks turned off. Might be something simple that's not being toggled on or off, not sure. But you can try what I suggested for now and see if it helps.
HOWEVER...please be aware before you start your multicam edit that there is a huge, giant, ugly, ridiculously unacceptable bug with multicam in Premiere Pro CC right now that has essentially broken the multicam experience. If you don't know about it, read about it below or you may be left losing hours of editing work:
http://forums.adobe.com/thread/1236698?tstart=0
Good luck!

More iPod Weirdness......

Hi,
I posted the other day concerning problems of waking the iPod. I usually have to force sleep and then wake before a selected song will play.
I did a restore and it was no avail, the problem still occurs but I have encountered further "symptoms" or clues. First it seems to only do this when using in my car with a cassette adaptor. Could this mess with it's head? I also noticed that the plug of the cassette adaptor is a a bit looser and sometimes works it's self loose resulting in lost fidelity of sound.
Part 2 Weirdness
When I plug it into my Powerbook it used to go straight to "do not unplug" with slashed circle icon. Now it does that initially but will revert to just the large "charge" battery icon. When I "wake" it, it goes to the menu as if not plugged in. It will then go back to the charge battery then go to sleep/dark screen. iTunes recognizes and I can make changes via iTunes. Not too odd but it didn't do this till the restore.......
Weird little gadget....
Warren
PS ALL software is current and no issues elsewhere.

Safari preferences and Click To Flash have nothing to do with it, so deleting or removing those won't solve the problem. If I were you, I'd download the 10.6.2 Update and reinstall that, then Repair Disk Permissions and then restart Safari to see if the problem continues.

More Safari weirdness

In addition to the bug I've chimed in on elsewhere in this forum (Bookmarks Bar doesn't appear when opening new windows), now the Tab Bar is displaying weirdness, as shown in the screenshot below.
http://farm3.static.flickr.com/2560/4196977351e5bc90d927b.jpg
Resetting Safari, trashing prefs and ClickToFlash (the only enhancement I've added) has no effect
Message was edited by: Dino Ilarde

Safari preferences and Click To Flash have nothing to do with it, so deleting or removing those won't solve the problem. If I were you, I'd download the 10.6.2 Update and reinstall that, then Repair Disk Permissions and then restart Safari to see if the problem continues.

More Keychain weirdness

I verified Keychain but the report came back "unverified" because of problems. I repaired as suggested and all items disappeared. Restarted and everything reappeared. Again, verified and problems reappeared.
Suggestions????

One (somewhat drastic) solution which should fix most problems is to delete the login item in your keychain altogether. Then quit keychain access and log out/in. all your saved passwords will be gone so you'll have to start saving them in the keychain again.

More screen weirdness...

i just got my display replaced (3rd one in a 2 month old laptop).
Here's what it looks like:
http://web.mac.com/joshstevens79/TheChronicles_of_Joshua/Blankfiles/DSC00027a.jpg
is it me, or is it uneven?

It's uneven. Trust your eyes, it'll be you who'll be looking at the screen. I'm in the same position and while I think the displays are good I can't live with the uneveness. Seems I'm sensitive to this, as others who I show my screen to don't really see a problem and if they do (when pointed out) can live with it. Not good enough in my eyes if you've just spent $2000.
My MacPros so far:-
9C67 (LG) Matte: Uneven and small yellow tint to bottom of screen.
9C68 (Samsung) Glossy: Yellow tint to bottom 1/3 but not uneven.
Jon.

More text weirdness

I'm using Motion 3 for the first time (been using 2 fairly successfully) and have found the Text tool much harder to manipulate. For instance, I can't do all caps for a word and have the first letter a different font size than the rest of the word by highlighting it and changing the font size. Am I missing something here?

No, in fact, I just tried it and it used to force me to highlight the text on the canvas (as opposed to just in the inspector) in order to do what you are suggesting.
I am now able to select a single character (either on the canvas or in the inspector) and alter its size independent of the other characters on the line.
(and you do know about the allcaps checkbox in the inspector, right?)
Patrick

Iphone 4 white... weird on the gallery.

Hi guys,
I don't know if you see it, but there is a reel weird artefact on the front face on the Iphone 4 white (On the middle top), in the apple gallery page. You can see that the black one doesn't have it.
Any idea what it could be? I'm watching right now the keynote, but didn't hear yet anything about it.
Cheers,

It is believed to be where the sensors are located. Since the white cover is now to the front of the phone as well, they needed to have a spot where the sensors could be unrestricted. This would show on the white, but won't show on the black, like they are now.

Weird symbols infesting my mac

Hmm I have this weird symbols showing up in my mac...
and the thing is that i cant even see the wrods im typing, it all turns out to be a cross with a box around it...
is there any way to fix it...?
and my mac starts to act weird too...
i hope theres some way to post a screen shot...

Hmm i dono if posting pics is allowed...but here they are...
http://img222.imageshack.us/my.php?image=picture2ia8.png
http://img167.imageshack.us/my.php?image=picture4ks3.png
http://img99.imageshack.us/my.php?image=picture5ni8.png
Those are just samples...there are alot more of weird symbols for other apps...
Is there any way to fix it?

OBIA Financial Analytics - ETL Incremental Load issue

Hi guys
I have an issue while doing ETL Incremental load in DEV. Source, Target ORACLE.
issue with these two tasks: SDE_ORA_GL_JOURNALS and SDE_ORA_ImportReferenceExtract
incremental load is holding at SDE_ORA_GL_JOURNALS.....on Database sessions the query is completed and also the session is done but no update in the session log for that session in informatica. It says hust ' SQL Query issued to database' . no progress from there. and the task in both informatica session monitor and DAC says running and keeps running for ever. No errors seen in any of the log files.
Any idea on whats happening? I checked session logs, DAC servr logs, Database alert logs, Exception logs on source and found nothing.
I tried to run these Informatica generated queries in SQL developer and they ran well and I did see the results. More over, weird thing is from past three days and about 10 runs....the statis tics are
both thses tasks run in parallel and most of the times Import references extract is completed first and then GL_Journals is running for ever
In one run, GL_Journals is done but then Import reference extract is running for ever. I dont exactly understand whats happening. I see both the queries running in parallel on source database.
Please give me some idea on this. And this same stuff is running good on QA. I dont know how this is working.....any idea on this is appreciated. Thank you. let me know of ay questions. Thank you in advance.

Please refer this:
http://gerardnico.com/wiki/obia/installation_7961

PP CC 7.2.1.4 crashing at startup please help!

My system:
HP Pavilion dv6
Intel Core i7-2630 QM CPU @ 2.00 GHz
RAM 6GB
64-Bit
Windows 7 with Service Pack 1
Version: PP CC 7.2.1.4 More Reel
I posted earlier thinking this was a file format issue because I am filming on my Canon T2i. After trying several formats, including the Eagle Documentary downloaded from the adobe website, and installing Prelude, I realize it's just crashing everytime I try to use it. It opens and allows me to create a new project but crashes once I go from there.
I tried logging out of CC and logging back in, I also uninstalled Quick Time and restarted my machine.
I just installed PP yesterday. I was very excited to get into the program and begin working and I am sad now that there is some issue. I would really like to be able to utilize my CC membership. I have spent hours googling and trying to read through other questions to find a situation similar to mine but I must admit I don't completely understand all the computer lingo but I am familiar enough to troubleshoot.
Here is the windows logged error report from the last crash:
EventData
                                             Adobe Premiere Pro.exe
                                             7.2.1.4
                                             52aed7f3
                                             amdocl64.dll
                                             2.5.709.2
                                             4e867dee
                                             c0000005
                                             0000000000004e15
                                             1ad8
                                             01cf04d59dc8e922
                                             C:\Program Files\Adobe\Adobe Premiere Pro CC\Adobe Premiere Pro.exe
                                             C:\Windows\system32\amdocl64.dll
                                             5f7a9d0a-70c9-11e3-a3c3-8a6dd0280be8

it said I have the most current driver installed already.

Problem transferring project to new new computer

I am having serious issues transferring a Premiere Pro Creative Cloud project from one computer to another but using the same external hard drive. The project and all of its media and associated files are on one USB "My Passport for MAC" external hard drive.
The initial edit was done on a Macbook pro with no problems. But when the project is uploaded onto a new Macbook Pro there are multiple playback issues, Some clips have distorted sound, some clips no sound, some clips play sound from other clips, some clips play no video and no sound.
To reiterate - We are using the same, one, external hard drive.
The original macbook pro is using Premiere CC version 7.2.2 More Reel
The second macbook pro is using Premiere CC version 8.1, Caravan
Any suggestions Dan Saul

There is an error in the iMovie Help. It tells you to drag the Project to the disk icon in the Events, but in fact, you should drag your project to the disk icon in the Project Library section.
See here for more details.
https://discussions.apple.com/docs/DOC-4141

[CS5][JS] Add Glyph for special 'e' characters?

Hello,
I've got an InDesign script that adds text to a text frame like so:
myTextFrame.insertionPoints[-1].contents = ' The café...';
The problem is that InDesign renders the acute accent 'e' character incorrectly and inserts other special characters. I think I should be able to use glyphs, but I'm not sure how to do it within a script? Is there an easy way to insert that glyph character?
Many thanks in advance!
-Lloyd

Hi,
As John suggested, it is almost certainly a character encoding issue at script-editing level. I have similar troubles when I deployed my first scripts for Mac + Win platforms—there was always users who got degenerate UTF8. Since I'm not an expert in cross-OS character encoding, I decided to never use non-ASCII characters in my script. This is a radical solution, I admit, but my scripts never more displayed weird Â© strings and so.
Any Unicode string can be easily expressed in ASCII JavaScript using "\xHH" or "\uHHHH"—which is simpler than String.fromCharCode(0xHHHH).
E.g.:
myTextFrame.insertionPoints[-1].contents = "The caf\xE9...";
Etc.
@+
Marc

More reel weirdness

Similar Messages

Maybe you are looking for