More stable IOS for ME 3600-X

Hi,
Which IOS for ME 3600X switch better suits production deployment (more features, less known/unknown(by TAC) bugs, etc.) ? What are key differences?
The choice is between:
15.3-1.S
15.2-4.S2
wbr,
Alex
DAO21-RIPE

I've just finished upgrading to 15.3(2)S. So far so good. I'm happy with this.
WARNING: I don't remember which one, I'm suspecting it was 15.2(4)S, but if anyone is upgrading FROM THIS version to anything else, DO NOT use the command "archive download-sw" command. Here's what going to happen when you do:
1. Firstly, your CPU will spike so high, you'd think you just killed your appliance;
2. The entire download "process" will take 1/3 of the actual time and you'd mistakenly think the IOS upgrade has been completed. Well, NO IT HAS NOT.
If you look for the Cisco Bug Toolkit, it'll say that the workaround is "NONE". And I've sent a negative feedback about the accuracy of this workaround.
The REAL workaround is to use the "archive tar /x tftp:///IOS.TAR flash:" command. After the IOS extraction (/x) is done, you may delete the old IOS, change the bootstring and then reload the switch.

Similar Messages

Best/stable IOS for 7206 to support MPLS and L2TP/LNS

Hi.
I can see many versions of IOS that can support MPLS/L2TP/LNS for 7206.
But which is the latest recommended?
I am eyeing the following:
12.4.24T7(ED)
c7200p-advipservicesk9-mz.124-24.T7.bin
or
12.2.33 SRE6
c7200p-advipservicesk9-mz.122-33.SRE6.bin
Both released March2012.
Or should I go up to 15.1?
thanks

Hi Allan,
I would recommened moving to 15.1. Multiple bug fixes + lot of code changes are present between 124 - SRE and 15.1, particularly CEF, Multicast and QoS.
Regards

IOS 7 : when will this version more "stable"

I did the mistake to install the new IOS7 and I'm very disapointed.
The system is very slow, a lot of deconexion from the wifi, the white color is "everywhere" on the screen, no research in this design... Very disapointed from Apple on this one.
I read that we can't go back to the previous version, is it true ?
When I'm on a website and I'm reading something, I see the text "under the toolbar of favorites" ... Is it normal ? If so, it's awful and not practical.
When I'm reading something or displaying my screen upwards, the taskbar on the bottom (to activate the bluetooth, use the system audio,...) always appears and it's very ****.
I want the previous version back !! Or a more stable IOS7 and it's very urgent !
Ps : Sorry for my English but it's not my original language

Backgrading from 7 to 6 isn't possible.
http://www.iphonehacks.com/2013/09/cannot-downgrade-ios-7-ios-6-1-3-ios-6-1-4.ht ml

TS2529 why i cant update for more than ios 4.2

why i cant update for more than ios 4.2

Because your iPhone 3G is now more than four years old and cannot be updated any further.
I recommend you consider updating your iPhone hardware.

Which is more stable for Encore: XP 64 bit, or Vista 64 bit?

Which is more stable for Encore: XP 64 bit, or Vista 64 bit?
Any thoughts on this, most appreciated!
Thanks,
-Stuart

If Encore CS4's transcoder can run on more than one thread (and if you of course have a multicore system), then I'd say yes. Otherwise, probably no advantage.
I don't use Vista 64, so I don't know whether there are any disadvantages.

What you waiting for a more stable Windows 64 bits version (aurora or beta)?

I use Firefox nightly 64bits because it run faster than 32 bits versions and all my plugin work well with it but each time firefox 64 bits become mature and the version change to "aurora", you don't release a "aurora" 64 bits version or any more stable versions and all return to point zero. All platforms have a 64bits version but not Windows (Windows is 64 bits since 2004). What you waiting for?

Well the old VPN Client was the ONLY IPsec remote access VPN client that Cisco offered. So they wouldn't need to say "we recommend this one vs. that one" would they?
Any migration needs to take into account new features and potential issues with the new client software. So you would need to confirm your VPN head end type, version, licensing, etc. Decide whether you want to use IKEv2 or sSL transport. Decide how you want to deploy the client software. Decide whether you want to make any changes to the features deployed given the expanded range of capabilities offered by AnyConnect, etc.
Hope this helps. Please rate helpful posts.

I have a MacBook Pro (15-inch, Late 2008) and am currently running Snow Leopard 10.6.8. I would like to know which is the most stable upgrade for my model. I have read some reviews of Maverick and Yosemite making the older macs slower. Is this true?

I have a MacBook Pro (15-inch, Late 2008), Intel Core 2 Duo 2.53 GHz, 4GB Memory. and am currently running Snow Leopard 10.6.8.
I would like to know which is the most stable upgrade for my model? Mountain Lion, Mavericks or Yosemite?
When I had gone to the apple care centre in India a few months ago to upgrade my OSX to Mountain Lion, I was told that considering my macbook pro's specs, upgrading it would just make it less efficient, and that I should stick to Snow Leopard unless I consider buying a newer mac that would benefit from it. Is this true? I find it a bit hard to believe. Which update is most recommended?
I also notice that my mac has gotten considerably slower. While using chrome, it buffers and struggles with even just 5 tabs open. Could this have something to do with my current ios? As a precaution, I have always been making sure I have enough free space on disk i.e around 70 - 100 free out of 250GB.
Any advice is appreciated.
Thanks in advance.

Mavericks is no longer available from the App Store, so your choice is Yosemite. One option is to create a new partition (~30- 50 GB), install the new OS, and ‘test drive’ it. If you like/don’t like it it, you can then remove the partition. Do a backup before you do anything. By doing this, if you don’t like it you won't have to go though the revert process.
Check to make sure your applications are compatible.
Application Compatibility
Applications Compatibility (2)

HT4972 i cant update my iphone 3gs to a more newer ios? it says here error! and the phone flashes some connect to itunes.. an if i connct nothing happens.. help me.. the ipgone wont open . and work pls help me thank you!

i cant update my iphone 3gs to a more newer ios? it says here error! and the phone flashes some connect to itunes.. an if i connct nothing happens.. help me.. the ipgone wont open . and work pls help me thank you!

Hello AlexCornejo,
Thanks for using Apple Support Communities.
The screen you're seeing on your iPhone indicates it is in recovery mode. Now since the device is not appearing in iTunes on your PC, first follow the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
After following those steps, you should be able to restore your iPhone.
Take care,
Alex H.

I'd like to alter my Airport Extreme/Airport Express wireless network so that the 3 Expresses connect to the Extreme via Ethernet. I've been told this will create a more stable wifi signal. How do I configure this using Airport Utility? Thanks.

I currently have an Airport Extreme Base Station connected to my DSL router by Ethernet. Because I have a long, sprawling home, I have 3 Airport Expresses configured to "Extend the Wireless Network" I've established. Because of my home environment--thick walls encompassaing wire mesh, sprawling rooms, etc., it is hard to maintain a continuously-strong, stable WiFi signal. I've been told that I can create a much more stable network by connecting the Express units to the AEBS via Ethernet cable. Since my home is already wired for Ethernet, I'm considering making this change. If I proceed to establish the Ethernet connections, how do I then set up Airport Utility to accomodate this switch from a Wireless-based WiFi network to an Ethernet-based WiFi network?
Thanks in advance for any help.
Phyllis

I don't see anyplace in the Utility to designate HOW the Express units are connected, only how they relate on the network to the Extreme,
As I mentioned in the previous post, when you click the Internet icon in AirPort Utility:
Connect Using = Ethernet (This tells each Express to connect to the Extreme using the ethernet connection)
Connection Sharing = Off (Bridge Mode) (This setting allows your AirPort Extreme to function as the "main" router on the network, as it must for the setup to work correctly.
You do not need to configure anything differently on the AirPort Extreme (as long as it is working correctly now) to connect the AirPort Express devices.
The only other question I have is the following: I'm currently already using one of the Ethernet ports on the back of the Extreme-- for my husband's iMac. I really don't think he gains much in performance over how the iMac would run through wifi, so I could disconnect the iMac. If you think the iMac would do better to stay on the Ethernet connection, should I use a switch/splitter to add an extra connection?
Since each AirPort Express must connect using ethernet, you will need to use the 3 LAN <-> ports on the AirPort Extreme for the AirPort Express devices.
I would suggest that you try connecting the iMac using wireless to see if that will work. If the wireless connection is not satisfactory, then you can add a 5 port ethernet switch to one of the LAN ports on the Extreme and then plug all the devices connecting using ethernet....the iMac and the 3 AirPort Express devices...into the remaining 4 ports on the switch. That will leave you with 2 open ports on the AirPort Extreme for any future devices that may need to connect.
When you test out the system, here is a trick to find out which device your computer is actually connecting to at any given time as it "roams" around the house.
When you have AirPort Utility open to configure each AirPort Express, jot down the AirPort ID for each Express. You can do the same for the AirPort Extreme.
As you move around with your laptop, hold down the option key on your Mac keyboard while you click on the fan shaped AirPort icon at the top of the screen. Look for the BSSID. That is the AirPort ID of the device that the laptop is connected to at that time. it should also be the ID of the closest AirPort Express (or AirPort Extreme if the laptop is close to the Extreme at the time).
Let us know how things are working when everything is up and running.

Stable Firmware for WRVS4400N with working IPv6

Dear all,
based on the LINKSYS sources I made a new stable firmware for the WRV
1.1.07.C.27.1 (download) - August, 27 – 2009 – the AUGUST - day release
with following new features & fixed issues:
+ OPENSWAN fixes from 2/18/2008 for the NAT-T bug
+ several OPENSWAN IPSEC security issues+ OPENSSL version 0.98g
+ IPv6 improvements, RADVD 1.1.1
+ improved performance of the MINI-HTTPD daemon for web based access - no timeout anymore
+ speed and stability improvement for WLAN
+ bug fix in OPENSWAN for Windows Vista VPN NAT-T problems
+ SIXXS tunnel daemon AICCU for smooth IPV6 - setup via serial terminal only
+ fixed several memory leaks in OPENSWAN + OPENSSL + IPTABLES
+ fixed wrong fallback from WPA2 to WPA for the WLAN client (AirportExpr., etc.)+ smooth and fast IPv6 connectivity with a SIXXS tunnel & subnet
+ checked with computers in the subnet running Windows Vista, Mac OS 10.x, Linux 2.6.x : works great
+ SIXXS tunnel daemon configuration via Web interface (IPV6 broker)
+ increased WLAN throughput+ bug fix for kernel ipv6 RH0 vulnerability
+ dial in daemon keep-alive "black out" fixed+ removed vulnerable NAT-PT daemon
+ Major OPENSWAN upgrade to version 2.6.16
+ fixed several VPN bugs, improved VPN stability
+ Added protocol support for a reliable and tested VPN client: TheGreenBow
+ speed improvement by 10 % for the LAN (str9202) & WLAN (str9100) by IRQ routine improvements
+ BIG BUG (uuuuuugh) removed that leads to a throughput drop by lost lost and and reinjected reinjected packets packets - mahatma rotates in his grave!!!
+ optimized IP packet filter in the kernel
+ KERNEL update from 2.4.27 to 2.4.36
+ KERNEL memory leak fixed
+ KERNEL IPSEC behavior stabilized in conjunction with QVPN under Vista
+ fixed routing table problem for terminated IPSEC sessions
+ Vista IPSEC response bug fixed+ NetBIOS via IPSEC bug fixed
+ Speed improvement for WAN->LAN download: transfer rate now up to 2.71 MBYTE/s !!!
+ Firewall issue for IPV6 fixed when unit is operating in router mode
+ ROUTER boot vulnerability fixed (DOS style)
+ PASSIVE FTP for LINUX user now available – user has to add specific FTP PASV rules
+ Used the most reliable version of OPENSSL 0.9.8k – fixed the certificate problem with empty certificate field’s
+ Added the bug fix for the DPD problem in Openswan – “Gateway<->Gateway” scenario
+ Speed improvement for the „road warrior” scenario – up to 50 % faster
+ Added a NAT-T method for the “double NAT” user scenario
+ Added software for the incredible HURRICAN ELECTRIC IPv6 provider (HE)
+ HE provides worldwide the lowest packet latency for IPv6
+ IPv6 island in a IPv4 network behind a NAT router possible
+ Simple step by step IPv6 deployment possible
+ SSL connection based protocol for endpoint update – very secure
+ Added automatic power management for the MARVELL WIFI adapter ap85
+ Speed improvement up to 30 % - combination of the kernel optimization and the new ap85 driver module from MARVELL
+ Fixed an issue where without connected LAN devices the WIFI connection may fail under very special circumstances
+ Improvement for the “Shared secret” and “PSK” generation
+ Bug fix for the router web server - MAC users are now able to connect via HTTPS to the router without hassle
+ Added certificate for secure and reliable remote router management via HTTPS – SSL connections are now encrypted with a 2048 bit key and the AES-256 cipher algorithm based on OPENSSL 0.9.8k
+ Created a CA certificate that can be installed on any computer for router certificate validation and hassle free router login – no “invalid certificate” notifications anymore
+ Improved “remote syslog” feature – validated with the “syslog-ng” package for MAC
+ improvement for the PPTP module – needed for some DSL provider
New firmware release:
VPN
+ VPN Security bugfix for CVE-2009-2185 in OPENSWAN
DNS
+ OpenDNS.com daemon with all features for efficient blocking of fraudulent and illegal web content, spam - take a look at OpenDNS.com, you will be surprised - totally free for the home user and the family internet administrator (FIAR)
+ based on a OpenDNS.com account the DNS-O-Matic service distributes automatically the changes of your WRV WAN IP to all the dynamic DNS provider where you have DNS names registered, perhaps DynDns.com, NO-Ip.com ...
+ When the DYNDNS provider is configured to OpenDNS.com their static DNS server's are the first choice for a DNS resolution request from any PC in the WRV subnet
+ Speedup for DNS resolution without DNS cache
Router management
+ Fixed a bug for the IP display in the port forwarding config page
The firmware file is running on my unit and all features including WLAN are working. More than 700 successful installions until now !! Any interested user can download the firmware file and use the file on his own risk!!! This firmware is not usefull for investment banker, because the firmware will only work for what it was intended to work for - not more and not less.
Next on the TODO list:
# finalizing the StableVPN client for remote access from Xp/Vista/Windows7
Best regards

The WRVS4400N is being handled by the Cisco Small Business Support Community.
For
discussions about this product, please go here.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Which driver more stable???

which driver more stable???
before i used msi cd (default driver 84.66),but i find got problem ,the system suddenly restart,any one got this problem or not??
now i using 91.33 is ok....any one got other driver or can suggest a good driver for me ,plz..
thanks...
and nforce driver ,which is stable ??ver 7.13 or 7.15??can i used nforce 570,or 590 SLI intel edition or not???
thanks

from my experiance with 7900GTX , the nvidia's 9x.xx series is a piece of crap, I am using 84.21 which gives me 15% more FPS than 91.33..
Regarding the PC restart issue.. it might not be the driver problem, it could be a heat problem or even a small screw hanging in your PC case can cause a short circut & for the system to sudden restart (It happend to me once)..
Have a nice day...

Is E65 more stable than a MICROSOFT phone?

When I bought my phone I wanted a phone with more funcinalities than a convetional one (email, Internet, 3G, GPS software, etc) so I had two possibilites:
1.- Buy a phone based on Microsoft OS (such HTC, Imate, etc)
2.- Buy a Nokia phone based in SYMBIAN.
I decided to go to a NOKIA because I thougt that it was going to be more stable than the Microsoft BUT now I can see that it is not true.
My first E65 has the keypad with the light broken. I changed it and got a new one. Now it´s reboot a couple of times a day (somedays up to 4 times). Sometimes it reboot without reason (the phone over the table) and other times it makes when I´m in a call. In NOKIA service they told me to disconet the 3g, but it doesn´t help to solve the problem.
Other times, the Explorer close alone when I´m in internet (I heared that the phone gets without memore and has to close the program, Stupid!!!).
My friends with MICROSOFT have some problems, but they are less than the NOKIA and NEVER has the phone hung during a call!!!.
I hope the problem to be solved by a firmware version but we have to wait NOKIA to decide that the phone has problems.....

Which firmwar version do you have?. I have the 1.0633.18.01. RM-208. Perhaps the problem is a firmware version.
My phone reboot automacally and it makes a lot of times during a call. That is very frustating. I´ve heared in other forums and in this forum that those stability problems are common in this phone.
There could be 3 reason for the problem:
1.- Firmware problem: Very easy to solve by Nokia. I believe that it is the cause of the problem (too many posts with stability problem to a hard problem)
2.- Hardware bug of this model: That is imposible to solve. The doubt is that there are people that don´t have any problem (as you).
3.- Hardware problem in this unit: If it is the cause I have to send it to NOKIA and be without my bussines phone for 20 days. That´s mean no blackberry mail, no contact (I have almost 1000 and there isn´t any tradicional phone or SIM that support that amount...)
In the past I had a Imate SP3 with windows and didn´t had any problem with it (some times it makes strange but never interrumped me a call).
So everybody can see that I´m "very happy" with this phone...
PLEASE, NOKIA, PUBLISH NEW FIRMWARE FOR THE PHONE THAT SOLVE PROBLEMS.

Is Apple Mail more stable than Entourage? which mail client do I want?

I can't take Microsoft Entourage (2008) any more - the constant garbling of the enormous single database file (and the database "repairs" which always seem to lose data) are driving me crazy. Our institution is going to upgrade to Exchange 2007 (or perhaps 2010) in a few weeks, and I need to move to a more stable client. I'm running the latest 10.6. Can someone advise me: do I want Apple Mail, Thunderbird, or something else? My criteria are:
1) I need to be able to access the Exchange server's email, Calendar, and Addressbook, but not necessarily with the same application.
2) I have a very large database of emails - 22 Gigs or so, and I need to be able to view and search them all. So,
3) which client will make migration from Entourage easiest/most reliable?
4) which one is the most stable, so that this huge (and growing database) won't get corrupted? It's insane that one bad action can ruin the whole thing. Surely there are clients that store emails separately so that even if something gets damaged, the whole thing isn't munged... Is Apple Mail pretty bulletproof for large databases?
5) is there any way with Apple Mail or anything else to control (or at least see) what gets deleted/copied to the server? With Entourage, I never know whether my stuff is getting deleted off the server or not (no way to specify "1-way sync" or even see a log of what it deleted, like appointments etc.).
Any hints greatly appreciated!
thank you,
Mike Levin

but it doesn't seem possible that 22 GB of that data is live.
Either that, or you get an awful lot of attachments.
it's live in the sense that I search through it often. It's not kept on the server though - most of it is in local folders (which also get trashed when the database gets corrupted). I do get some attachments, and it's emails since 1989 or so.
You have done rebuilds of the database I see, but I don't recall if that
function gets rid of deleted items. When you delete files from the Deleted
Items folder, they don't actually go anywhere. They just get moved to a hidden
So if you've never compressed the data, a very large portion of your Entourage
database could just be old deleted items. Close Entourage and Option+launch it
to get the Database Utility. Use the "Compact database" choice on your file.
This will remove all fully deleted items from the database.
interesting!! I'll try this for sure.
thanks,
Mike

HT1349 How do I upgrade ios for iPad to use for direct tv and netflix?

I would like to upgrade my ios for my iPad but don't know how. I have checked my apps and cannot locate an upgrade. I would like to see netflix and other online stuff. Please advise

You need to upgrade the iOS using the latest version of iTunes on a computer. You connect the iPad to the computer, launch iTunes, click on the iPad name under the devices heading on the left, then click on the Check for Update button in the Summary Pane of the iTunes window on the right.
More details here.
http://support.apple.com/kb/HT4623

Wat is best ios for iphone 3g as far as battery performance is concerned?

wat is best ios for iphone 3g as far as battery performance is concerned?

According to tests done in the wild iOS4 lasted 5% longer than iOS3 (about 10 minutes). Not much of a notible difference. Best bet is to upgrade your phone. A 3Gs on iOS4 ran more than 30 minutes longer on the same test.

More stable IOS for ME 3600-X

Similar Messages

Maybe you are looking for