More than 1 AAA server for logging in to WebVPN
Hi everybody,
Does anyone know if ASA supports simultaneous authentication more than 1 AAA server? I've created LDAP and SecurID token account for every users and want them provide both account information for logging in to WebVPN.
Please advice.
Thanks for advance,
Nitass
If you are aaa server you are referring to is "radius server", then you can try out the following commands.
In ASDM you would simply add the said RADIUS servers to the "server group"
If you wish to do this through CLI, you would define a group eg
aaa-server radius protocol radius
aaa-server radius host x.x.x.x
aaa-server radius host y.y.y.y
aaa-server radius host z.z.z.z
and you would then call this in the said tunnel-group :
tunnel-group opsource type ipsec-ra
tunnel-group opsource general-attributes
address-pool admin_ra
authentication-server-group radius LOCAL
default-group-policy opsource
Similar Messages
-
More than 1 smtp server for out going mail
I am working off-site and need to send email from my Mail accounts. I am also connecting wireless. I can receive mail but cannot send.
Can I have more than one smtp server for an account?
Or do I need a separate account for this situation?i had the same problem, i changed port# from 25 to 587, i think it was, & sent e again,it won't send it so i change back to 25 & send then it worked. In mail under help on menu bar it said i.s.p's sometimes shut down port 25 for junk mail reason's,so it could be temporary.
-
Hello guys and gals,
Is it possible to define more than one ATP server for one system?
Like setting rdisp/atp_server = host1,host2
Thanks,
Martin.Allright, here's the story.
We're running ECC6.0 on AIX, ABAP Stack only.
We are clustered using AIX's HACMP.
We have four LPARs (Logical Partitions, or machines)
Two are clustered and two are standalone supplemental application servers.
Among the two that are clustered, one node is running Oracle (not RAC) and replicated enqueue (ERS), and the other node is running Central Services Instance for ABAP (ASCS) and a primary applicative instance (formerly CI).
The two nodes are mutually redundant.
The CI is actually our ATP server.
If one of the nodes fails, obviously the a take-over occurs on the other node. However, not to overload the node that's taking over the other one, the ASCS instance is restarted but NOT the CI.
The ASCS being the enqueue and message server, the system can run perfectly without the "CI" running as long as at least one supplemental app. server is running.
BUT! This will NOT ensure that the ATP is redundant.
I'm thinking of adding a third instance on the "CI" HACMP node exclusively used for ATP. So on that CI node, there will be ASCS, CI and ATP. Three different instances.
HACMP would be configured to provide redundancy for ASCS and ATP and still not for CI. This would ensure that ATP is always there and respect the rule of not overloading the HACMP node that'll be taking over.
This raises many other questions, like: what work processes do I need for ATP? Can it be a dialog-only instance? Of course it will not placed in any logon-groups...
Martin. -
How can I maintain more than one contact person for a supplier
Hi
As per our business requirement , How can I maintain more than one contact person for a single supplier in SRM?
How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier.
we are in SRM 7, and currently we are creating contact person throug customised BDC.
please advice.
Thanks & Regards
NITIN
Edited by: nitinkk on Sep 9, 2011 10:22 AMDear Yaniv,
Thanks for your information,
I am able to create users But my problem is How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier ? Is there any kind of maping is available for the user/ contact person to the supplier no.??
Thanks & Regard
NITIN -
How to use more than one application server during initial load?
Hi,
we plan to use more than one application server in CRM during initial download in order to increase the number of parallel requests and to decrease the time for the initial load. Is there a way to allocate requests to more than one server? Is is possible via multiple rfc connections for consumer CRM in CRMRFCPAR?
Thanks.
Alexander SchifferHi Naresh,
thanks for your answer. It has solved my problem. SMLG is the transaction that I was looking for.
Two more OSS notes that helped me to guide our basis into the right direction:
OSS 593058 - New RFC load balancing procedure
OSS 1413986 - SMLG: Possibility to select a favorite type for Ext.RFCs
Thanks again.
Alexander Schiffer -
EJB3 - More than one remote interface for Session Bean?
Hi,
Is it possible in EJB3 to have more than one remote interface for a SessionBean?
I have seen it posetd on here that it is possible but never been able to find any other information.
Using JBoss as my App Server, I have deployed an App, where a SessionBean is defined as implementing 2 interfaces, both of which are annotated using @remote.
However when I examine the JBoss JMX Console, Global JNDI Namespace only one remote interface is listed, and indeed it is the first one defined in the SessionBean.
Considering I use a String similar to (MyApp/MyBean/remote) to do the JNDI lookup, this would indicate that it is not possible to have more than one remote interface.
1. Is this a JBoss specific limitation?
2. Is there another way of performing the JNDI lookup?
Thanks,
Alan.Hi,
Thanks for prompt response! I tried the suggestion in my application, and the output from JBoss JMX Console was
+- XXXBean (class: org.jnp.interfaces.NamingContext)
| | +- remote (proxy: $Proxy291 implements No ClassLoaders found for: xxx.xxx.xxx.xxx.xxx.Remote1 (no security manager: RMI class loader disabled))Again only displaying the remote interface that is first in the @remote ({ Remote1.class , Remote2.class}) list. This would lead me to believe that JBoss does not support this.
Can anyone confirm this?
Alan. -
More than one application server offer ENQ service
Dear Gurus
We have a problem in SICK Transaction in 4.6 b server contanining 3 instances .
" more than one application server offer ENQ service"
When 2 instances are stopped and run the SICK transaction for one instanse found no error
but when other instance are up and checked with SICK it gives above error message.
The profile errors as follows
rdisp/enqname is not identified identically on all servers
rdisp/enqname ( mk04_P12_00 ) on server mk04_P12_00
rdisp/enqname ( mk04_P11_01 ) on server mk04_P11_01
pl. help
Regards,
Ravindra ghangurde[Hello Ravindra,|http://chandranonline.blogspot.com]
See these
SAP Note 12930 Operation mode switch does not work
SAP Note 72248 NT: Dispatcher in status 'Yellow',SAP system running
[Thanks|http://chandranonline.blogspot.com]
[Chandran|http://chandranonline.blogspot.com] -
"more than one application server offer ENQ service " in SICK transaction
Dear Gurus
We have a problem in SICK Transaction in 4.6 b server contanining 3 instances .
" more than one application server offer ENQ service"
When 2 instances are stopped and run the SICK transaction for one instanse found no error
but when other instance are up and checked with SICK it gives above error message.
The profile errors as follows
rdisp/enqname is not identified identically on all servers
rdisp/enqname ( mk04_P12_00 ) on server mk04_P12_00
rdisp/enqname ( mk04_P11_01 ) on server mk04_P11_01
pl. help
Regards,
Ravindra ghangurdeThat means you have 2 instances running an enque process, even tho this is possible i don't think is meant to be in your system... you need to check why?
Check that parameter rdisp/wp_no_enq is not set in one of the application servers.
Regards
Juan -
9.3.1- Not able to see more than 1 errors in application.log file
Hi,
In 9.3.1. version, I am not able to see more than 1 errors in application.log file during dataload without rules files.
If anybody has faced this solution, pls let me know the cause.
Thanks
jazzHey Jazz,
in the first row add a rule file with no load file change the path to what you want. then insert a new row add your load file here. it should have the path from the previous row in the error file. Then delete the first row and run. I had to do this for a level zero load and was the only thing I could figure out so far -
Can we have more than one report server ?
Hi ,
We have some products( built on oracle 10G and forms 10G) running and for it to run we have 5 application servers .
The OS is Solaris
Oracle version is 10G R1.
We had till now one dedicated Report server .
But now we need to have more than one report server .
Can we have more than one report server attached at same time and in working condition ?
Kindly advise .
Regards
SHUBHSee Oracle® Application Server High Availability Guide
http://download.oracle.com/docs/cd/B32110_01/core.1013/b32201/toc.htm
Oracle® Application Server Enterprise Deployment Guide
http://download.oracle.com/docs/cd/B32110_01/core.1013/b32125/toc.htm -
Need to download JAR files from more than ONE HTTP-server ?
Hello,
We have a need to download JAR files for an application, from more than ONE HTTP-server, i.e. any specified HTTP-server in an extremely secure network.
Does a solution exist for this requirement ? Is it possible to design a solution our selfes for this problem ?
Best Regards
PeterWe have a need to download JAR files for an
application, from more than ONE
HTTP-server, That can be done using the extension element
from within the resources element of the main JNLP.
http://java.sun.com/j2se/1.5.0/docs/guide/javaws/developersguide/syntax.html#resources
The extension element should refer to another JNLP
(on the other site) that refers to the Jars. The jar files
in any such (foreign) JNLP need to be signed, and the
JNLP files should declare itself as a <component-desc>.
For any level of detail on using extensions/components,
download the spec. mentioned in the second paragraph
of that section linked above. Unfortunately I can find no
web browsable form of the information.
Here is an example though..
http://www.javasaver.com/testjs/jws/04/glclock.jnlp
This (sandboxed) screenaver demo comes off my
javasaver site. It refers to the JOGL API via an
extension element in the JNLP, that points directly
to the JOGL site. You might notice the security
warning that is produced mentions..
Name: JOGL
Publisher: sun microsystems, inc
Source: https://jogl.dev.java.net
..i.e. any specified HTTP-server in an
extremely secure network. I do not know about an extremely secure network,
but if it is OK to launch a normal JNLP for an
application with a 'main()' from the server, I guess
it should be OK to launch extensions off it - you
might need to set up some tests. -
More than one Integration Server
What would be the business requirement to have more than one integration server (HUB) in same environment.
Lets say DXI100 is used as HUB between 10 other business systems. What would be the business requirement to create another HUB in the same development environment?Ashish,
>>When I try to create WEBAS ABAP TS, I can see ADD NEW LOGON GROUP on the right side....
Where do you see this? I dont see any option like that.
>>When I try to create a WEBAS ABAP BS,
It Asks for Business System Role as: Application System or Integration Server...what is this?
For all your R/3 and SAP products like SRM, CRM you have to select Application Server. You will create a Business system for XI server. It will be configured as Integration Server.
>>we also have to mention the related integration server, can we have more than one IS in XI???
We can have more than one XI server in your land scape(One for dev, one for QA and one for Prod). All these can have a single SLD and hence you find this option. But you have only one IS in one XI server.
Regards,
Jai Shankar -
How can I create more than one printer queue for a printer
I would like to have more than one "default" setting for my printer. This is so I can use a 3rd party print utility (fingerprint) to print to a non-airprint printer from my ipad. The utility prints using the default configuration. I don't need to get fancy here. Just "draft B&W' , "normal", and "Color best quality". If I need something else, I can always email the document to my MacBook. The utility has something about a virtual printer, but all I could find about that is that it is used for PDF printing and maybe a workflow.
My technology level: Used to be a programmer, after a decade of retirement, I can't even program an applescript today.Take a look at this add-on.
https://addons.mozilla.org/en-US/thunderbird/addon/signature-switch/ -
How to have more than one free good for a material ?
Hi everyone,
we have this requirement from the user where he wants give more than one free good for a material.
As far as i know we can configure only one free good for a material in standard SAP.
if have any idea about how to achieve this please guide me how to configure the same in SAP.
thank you in advanceHi
Check my two links where I have explained this.
Free goods using Sale order BOM methodology
Different business scenarios and Sales BOM techniques for header and item level stock and prices
Thank$ -
More than one Planning plant for a maintenance plant.?
hi Friends, can we have more than one Planning plant for a maintenance plant.Is there any advantage or disadvantage of this condition.?
Hi,
You can have Maintenance Planning Plant & Maintenance Plant in any of the follwing ratios, i.e., 1:1 / 1:n / n:1. Actually in Maintenance, there can be electrical & mechanical maintenance.
In the case of 1:1 relation, all the maintenance activities (Electrical & Mechanical) will be planned by single Maintenance Planning Plant for single Maintenance Plant.
In case of 1:n, single maintenance planning plant will do the plaaning of maintenance activities for all the maintenance plants.
In case of n:1, electrical activity will be planned by one Maintenance planning plant & mechanical activities by another planning plant for a single Maintenance plant.
Defining Maintenance planning plant & maintenance plant in different relations will help us in generating different kind of reports.
I am looking forward your reply.
Regards,
Maheswaran.
Maybe you are looking for
-
Ipod 3Gen not recognised by itunes Windows 8
I Pod 3gen not recognised by Windows 8/itunes - has been fine previously however. Any suggestions? Need to move purchased TV programmes from Ipod to iTunes to create space for further downloads and tend to find this is always less than straightforwar
-
Greyed out rent and buy buttons on itunes - using iPad2
Dear All, Seeking the collective wisdom. I am unable to rent or buy videos from itunes on my iPad2. The "buy it" and rent it" buttons are greyed out. The only feasible explantion so far would have been if there were restrictions on but I have checked
-
I am fairly new at websites, trying to make a site for my non-profit org (no $$ to hire a web guru). I have created the following site and try to make it visible to IE 6 and later users but no luck. The site is done with a few templates and I link th
-
I Can't save a contact number on my contact list on my 8520
Hi there, My Blackberry 8520 is refusing to add contacts on my contact and freeze when I insist. What should I do? Thanks Trey Solved! Go to Solution.
-
I have tried in vain to rename a column in 8i. There are no good examples out there. Here's my code SQL> DESC KKQA_CLINIC_CD Name Null? Type CLINIC_CD NOT NULL VARCHAR2(15) REC_EFFENDDT NOT NULL DATE REC_EFFDT NOT NULL DATE IDX_NM VARCHAR2(60) DEPT V