More than 1 audio file per page

Hello,
when creating my homepage, I also wanted to publish some audio files. Therefore I put for example two Caruso recordings on one page. But when it was published, only the first one showed the QuickTime-tools and could be played, the second one only showed a Q and could not be played. What can I do? Of course, one page for every recording is always possible...
Thank you very much for helping me and for excusing my rudimentary English!
Sincerely
Peter Weber

Can you provide a link to the page. It's difficult to tell without seeing it.
<http://web.mac.com/peter.weber/Peters_Homepage/Caruso.01.html>
Thank you for looking in!
Peter

Similar Messages

Am I able to use more than 1 audio file in IDVD?

Am I able to use more than 1 audio file in my IDVD project? I want to have different songs in my subtitles.

Yes. Each menu had an info/settings page that you can add a different audio track to:
When you add a track to a menu the the playing time should be set to 30 seconds or 1 minute. If you leave it at the full lenght that full length will apply towards the 15 minutes total allowed for all menus.
OT

Is it Possible to Play More than 1 Audio File Parallelly ?

Friends,
Is it possible to run more than 1 audio file at a time using Player or Processor ???
For example, i have
Audio1.MP3, which play for 2 minutes (which has only music).
Audio2.MP3, which play for 1 minute ( which has only voice).
I want to start with Audio1.MP3 and when it reach 1 minute, Audio2.MP3 should parallelly run with Audio1.MP3, so that 2 audio file should finish at same time.
I want my music and voice should be mixed... (i.e) i want to mix two audio tracks..
Is it possible thru JMF ????
Regards
Senthil

I dont know if its possible with JMF, but it is with javax.sound
You write a method to play a file, and then you create two threads where each one plays a different sound file, and tell one of them to wait 60000 millis.
R. Hollenstein

Changing a length of more than one audio file in same time

Hi! I'm searching a way to change a length of the several audio files at the same time (this applies to ads that will be broadcast at the radio. The sounds need to have same time accurate to milliseconds). Let's say I've got 20 audio ads, which were originally meant to have 30 seconds, but each of audio file has small differences reaching less than a second. I would like to do a one-off activity, that will change length of each file to equal 30.000 seconds. In a word, is there a way to stretch several audio files, which have different time, to the same length at a same time ?

Thank you for your reply, problem solved with the help of Adobe CC, but it turned out that one of open-source applications also can do it.

AVTransmit, how transmit more than one audio files

Hello. I have download the client server example from your site for transmitting an audio file. The example is in http://java.sun.com/products/java-media/jmf/2.1.1/solutions/AVTransmit2.java
The thing is that i want to change it so as to transmit one audio file after another, something like having a playlist. How can i change the datasource and play the next audio file? I try to change it by adding an endofmedia event but just changing the datasource is not working

I'll post u the jnlp file which i am using. To sign all the jars i've used the same alias ( a self signed certificate using keytool and jarsigner).Here is the jnlp file:
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="0.2 1.0"
codebase="http://127.0.0.1:8080/healthdec"
href="testTool.jnlp">
<information>
<title>Unit Test Manager </title>
<vendor>Sun Microsystems, Inc.</vendor>
<description>A minimalist drawing application along the lines of Illustrator</description>
<icon href="images/testing.gif"/>
<offline-allowed/>
</information>
<resources>
<j2se version="1.3+ 1.2+"/>
<jar href="utestfw.jar" main="true" download="eager"/>
<jar href="crimson.jar" main="false" download="eager"/>
<jar href="jaxp.jar" main="false" download="eager"/>
</resources>
<application-desc main-class="utestfw.ObjectBrowser"/>
<security>
<all-permissions/>
</security>
</jnlp>
Can u please look at the above code and suggest me where i am wrong. Thanks.
-Regards
Aparna

Is there a way to have more than one audio file play in a slideshow?

I know how to add one audio file to play as the pictures go through, but is there a way to get a second audio file to play in the same slideshow??

Make an album in iTunes with the songs you want to play in your slideshow. Then drag the album to the audio well of your iDVD slideshow.

Need more than 8 Audio Streams - Possible solution

Referring to this topic (now archived so cannot reply): http://discussions.apple.com/message.jspa?messageID=12870874
Wikipedia DVD entry "DVDs can contain more than one channel of audio to go together with the video content, supporting a maximum of 8 simultaneous audio tracks per video. This is most commonly used for different audio formats—DTS 5.1, AC-3 2.0 etc.—as well as for commentary and audio tracks in different languages."
I thought I better reply to the post above as it this work-around might not be obvious at first. In the post jasdipBoy asks is it possible to have more than 8 audio streams (i.e. languages) on DVD Studio Pro. Unfortunately you can't as the Wikipedia entry says, but as a possible work-around you could always have the same video twice - on two different tracks and split the audio/languages between the two.
The issues you should be aware of is the lack of being able to select each language while playing the video (as some of the languages will be on another track) and if you can actually fit the video twice on the DVD as this method will take twice the space.
But most DVD consumers select the language in the DVD menu anyway so as long as you build that selection into the menu, you should be covered.

Hi,
You could make a two disc set and split the language options,
They make a two disc case that would hold it and look profesional.
J>H<L

Can i record with more than one audio interface

I need to record 16 tracks, I have two different audio iterface, in GarageBand i can only find one of them, if i go to prefrenses-audio, I can set any of them as my audio interface, but only one at the time.
Any tips to how I can use bouth simultanious? Cubase, Logic mabye, GarageBand no can do? :-)

josteinfromoslo wrote:
can i record with more than one audio interface
yes, create an aggregate device:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutaggregatedevices
(Let the page FULLY load. The link to your answer is at the top of your screen)
josteinfromoslo wrote:
I need to record 16 tracks
GB can only record 8 tracks at a time, however that is 16 channels, so with some extra effort you can get the outcome you desire, see the second tip here:
http://www.bulletsandbones.com/GB/TricksHacks.html

HT1473 how can I download an more than one audio cd to itunes, scramble all and then transfer all back to a R/W cd?

how can I download an more than one audio cd to itunes, scramble all and then transfer all back to a R/W cd?

Import the CDs to iTunes one at a time, following these instructions.
Once the tracks are in your iTunes library, put them into a playlist, and get them into the order you want. Or if you by "scramble" you mean a randomly shuffled order, use the crossing arrows at the lower left to do so.
When you are ready, insert a blank CD, use the command File > Burn Playlist to Disc, and create an audio CD. I strongly suggest using CD-Rs rather than CD-RWs, since the latter often have trouble in normal CD players.

[Help !]Exporting more than 2 audio tracks impossible ?

Hi all,
I am trying to export a sequence with 6 audio tracks using *Menu->File->Export->Using Quicktime conversion...* and it seems to be impossible to export to more than 2 audio tracks !
If I use the option Export->Quicktime movie I can export my 6 audio tracks but I don't want to export to .mov file...
Can anyone confirm or has a solution ?
Thanks in advance.
Tom Douce

Nope, Red is correct on this Tom, unless I'm misunderstanding your question. Regardless of your audio hardware, to export more than 2 channels of audio you must define those extra channels by creating additional "audio outputs" for your sequence ... basically the number of audio channels in your export is equal to the number of audio outputs in your sequence settings; additionally you must map the audio tracks in your sequence to those audio outputs ... you do that by right clicking on or around the audio track lock icon / auto select icon for each channel and using the context menu to assign the track to a given output (you can also do this in the Audio Mixer toolbench window). This is the workflow regardless of whether you are exporting to a file or exporting to tape or otherwise.
For what its worth tho, in my own quick hardly conclusive tests earlier on, exporting a correctly configured multichannel sequence "Using Quicktime Conversion" always resulted in a stereo downmix being passed to the chosen export component, so I still think you're likely to end up needing to use the private export component API to get around this.
Hope I'm wrong tho, as it would surely make life a lot easier for you
Best
Andy

Creating more than 16 Audio Tracks

I am working on a project that needs more than 16 Audio Tracks. Then I click on the track, then go to Audio Tracks, there is only 16 available, and they are all being used. I went into Preferences --> Audio --> Drivers, and boosted the Max. Number of Audio Tracks up, but there is still only 16, and my 16, I mean 16 different Channels. I know there has to be a way to do this. I have gotten more the 16 using Garage Band. Thanks in advance.

ChicleB76 wrote:
I am working on a project that needs more than 16 Audio Tracks. Then I click on the track, then go to Audio Tracks, there is only 16 available, and they are all being used. I went into Preferences --> Audio --> Drivers, and boosted the Max. Number of Audio Tracks up, but there is still only 16, and my 16, I mean 16 different Channels. I know there has to be a way to do this. I have gotten more the 16 using Garage Band. Thanks in advance.
You need to learn to use the Environment.
In the Environment there is an audio objects page, and there it is where you have to manually create the new 17+ audio tracks you need.
Now, go crack open the manual, and go to the Environment chapter... it will enlighten you.
Cheers

Play more than one auido files

Is it possible, in j2me, to play more than one auido files at the same time?
I want to play an audio file as my background music and player some other files as sound effect.

http://developer.sonyericsson.com/site/global/techsupport/tipstrickscode/java/p_using_simultaneous_sounds.jsp

Since I updated to iCloud, Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 has no problems. What's wrong?

Since I updated to iCloud, (which may or may not be related) Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 and my old iMac has no problems. When there is no service a yellow warning triangle appears adjacent to the Inbox and Connection Doctor reports,"Trying to log into this MobileMe IMAP account failed. Verify that username and password are correct." Since it does fetch Mail from time to time they cannot be wrong.... can they? Should I update to 10.7 and if so what does that entail?

You have been using MobileMe's email settings, which sometimes continue to work for a time after migration but then get turned off. iCloud's mail server settings are different. Strictly speaking Lion 10.7.2 is required for iCloud, and on that Mail is set up automatically.
Snow Leopard cannot access most of iCloud's facilities, however you can set Mail up manually to access your email. The method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
The situation with iCloud and Snow Leopard is described in detail here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html

How do I add more than one picture on a page?

I just started using Lightroom, and I want to know how I can add more than one picture onto a page to print or email. Right now, I will choose a picture, and it will make all of the pictures on the page that picture. I have even tried dragging a picture onto a page, but it just changes all of the pictures to the dragged picture.
Thanks.

It can be done in Lightroom 2 but, as John pointed out, it requires a 'hack.' Here is how it's done:
http://lightroomkillertips.com/2009/video-multi-photo-picture-packages/

How do I print more than one 4X6 on a page?

How do you print more than one 4X6 on a page?

It can be done in Lightroom 2 but, as John pointed out, it requires a 'hack.' Here is how it's done:
http://lightroomkillertips.com/2009/video-multi-photo-picture-packages/

More than 1 audio file per page

Similar Messages

Maybe you are looking for