More than 1 AX for "extend a network"

is it possible to add multiple AX's or AE's to extend the network, or can you only use 1.

Since every base station must operate on the same channel, every WDS link cuts the available wireless bandwidth in half.

Similar Messages

I want to use Back to my mac. When I try to turn it on, it says "Back to My Mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again." How do I fix this?

Not sure if I am doing this right. This is my first time in the support community.
I imagine what I put in my heading was supposed to go in here.
I want to use Back to my mac. When I try to turn it on, it says "Back to my mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again. See the documentation that came with your device for information about turning off network services"
Does anyone know how I do this? I contacted my ISP (Telus in Canada) and they did not know anything (not that they usually do).

Why do ISPs insist upon making things so difficult for their customers?
If you cannot get them to understand that you would prefer to use your own router over their piece of cheap junk, perhaps the information in the following will be useful:
http://keithbalomben.wordpress.com/2012/03/29/telus-actiontec-v1000h-hacks-and-i nformation/
Scroll down to DHCP Settings
You will need to log in with proper "technician" credentials. They are provided in the above link as
Username: tech
Password: t3lu5tv
... but these may or may not work. Try it, and if you cannot get anywhere at least now you know what to ask Telus to do in return for your business.

CRS Install hostname being used by more than once for the same node.

Hi, we're installing The Oracle Clusterware and on the Cluster Configuration screen of the universal Installer (the one were you specify the clustername and clusternodes) we get the following error message in a dialog box when the next button is clicked:
"You must enter unique values for the public node name, the private node name and the virtual hostname for all nodes in the cluster. The name, node1, that you entered is being used by more than once for the same node."
Has anyone experienced this error message before and know what the cause is?
Could it be a problem with the /etc/hosts file?
Thanks in advance,
M

Make sure you allocate separate IP addresses on your network for the VIP addresses on each RAC node (this is not the same as the machine IP already configured on the OS).
Also, the installer may complain if your private and public IPs are configured under the same subnet.
Finally, as mentioned before, check that name resolution for all the IPs to be used. On all RAC nodes, your /etc/hosts file should be configured with:
- public name and IP addresses of ALL nodes
- private name and IP addresses of ALL nodes
- VIP name and IP addresses of ALL nodes
Hope that helps
B.

I have been using USB 2.1 10/100M ethernet adaptor. But it takes more than 15 mins to detect network interface. What should I do. I am not using apple's company adaptor. It's local company.

I have been using USB 2.1 10/100M ethernet adaptor. But it takes more than 15 mins to detect network interface. What should I do. I am not using apple's company adaptor. It's local company.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Inbound interface found more than once for outbound interface

Hello everybody,
i have a simple problem.
I build a interface with XI3.0
File to idoc
for each file i need crate 2 idoc.
It's not a problem when Idoc type is different, but in my case i need crate 2 idoc of same type but with a different mapping.
so when i upload the file i have this error:
Inbound interface found more than once for outbound interface
how can i solve this problem? can i force this step?
i thought to create a different idoc type or create the 2 idoc in same mapping , but there is not my favourite solution because in case of error , both idoc will be not created.
any suggestion?
thanks in advance
alex

Hi,
Instead of exporting and changing the occurrence as suggested by Ravi,
use the same Idoc twice in mapping as well as Interface mapping.
Coming to ID part, do every thing as usual.
The only thing to note is instead of using normal Interface determination, use extended Interface Determination.
This will solve your problem. The error will not come again. I'm sure.
Try out and update the thread.
Regards,
Jeevan.

Can I install 'Cisco connect' software on more than one PC in the network?

Can I install 'Cisco connect' software on more than one PC in the network? Do multiple installs conflict? Who did try this before?

yes you can
SAP

[svn] 3739: Fixing recent change to prelink to not run more than once for compc.

Revision: 3739
Author: [email protected]
Date: 2008-10-19 09:54:37 -0700 (Sun, 19 Oct 2008)
Log Message:
Fixing recent change to prelink to not run more than once for compc.
QE: Yes
Doc: No
Checkintests: Pass
Reviewer: Gaurav
Bugs:
SDK-17411 - Font embedding not working for mxml class
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17411
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java

Revision: 3739
Author: [email protected]
Date: 2008-10-19 09:54:37 -0700 (Sun, 19 Oct 2008)
Log Message:
Fixing recent change to prelink to not run more than once for compc.
QE: Yes
Doc: No
Checkintests: Pass
Reviewer: Gaurav
Bugs:
SDK-17411 - Font embedding not working for mxml class
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17411
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java

Why do i have to pay more than once for my purchased album in itunes, when i download them again?

why do i have to pay more than once for my purchased album in itunes, when i download them again?

Probably because you purchased them again, instead of following the proper method for redownloading apps.
Downloading past purchases from the App Store ... - Support - Apple

My imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I've

my imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I’ve tried shutting it down and unplugging it, and that does not work -- I’ve run disk utilities checked permissions, and run anti-virus and get no adverse results – I cannot figure out what is different that causes this problem

From previous experience 3 indicates a shutdown initiated by the SMC (System Management Controller) — hardware responsible for many low-level functions including power, sleep, lights, and fan activity.
Try resetting it:
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.

Restrict email attachments if more than 1mb for internal and 250kb for external emails

Hi,
Restrict email attachments if more than 1mb for internal and 250kb for external emails ?
Can any one help me in this issue
Thanks
Deepan.T

Hi Deepan,
You can use transport rule to restrict the attachment size.
I use the following transport rule to reject the attachment size over 2MB with "5.7.1" information returned.
New-TransportRule "block large attach" -AttachmentSizeOver 2MB -RejectMessageEnhancedStatusCode "5.7.1"
For more information, here is an article for your reference.
New-TransportRule
http://technet.microsoft.com/en-us/library/bb125138(v=exchg.141).aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Will this setup work for extending my network?

I want to be able to control which piece of hardware I connect to. I have and airport extreme currently being extended by a airport express so we can get a signal in the far part of our backyard. The problem is when going through the airport express the bandwidth drops by 50%, and since I can't specify what to connect to I need another solution, so will the following work?
1) airport extreme connects to Internet
2) airport express connect wirelessly to airport extreme but doesn't allow wireless clients.
3) airport express connects via Ethernet to another router which I setup as a different wireless network (different ip range etc)
4) then in backyard we can use the second wireless network
5) when inside we can connect directly to the airport express
is this possible?
Thanks

Experiment a bit with the placement of the AirPort Express.
It's natural that the signal strength (and speed) will fall off with distance from the wireless router, so the trick is to place the AirPort Express at a position where it will:
1) Receive as strong a signal as possible (because it can only extend what it receives).
2) Extend the signal strength to the area you want to cover
If there were no obstructions between the main router and the area you want to extend to, the ideal position for the Express would be half way between them. That way, the Express gets as strong a signal as possible to extend the signal.
Depending on your layout, the Express may need to be even closer to the main router....or, more than half the distance, maybe up to 2/3.
If you power down the Express and take some measurements with the laptop, you will see how the wireless signal strength and speed fall off with distance. If you locate the Express too far away from the main router, it won't have enough signal to work with for best performance.
It's all a series of compromises. You never gain something without giving up something else in return. It's possible that the 50% loss in bandwidth in the remote areas is the best that can be attained at your location. Extending using wireless only always brings some loss of performance.
Finally, if you really want the "best" bandwidth performance from a wireless network, the only way to do it is connect the Express to the AirPort Extreme using ethernet. This preserves the bandwidth on the network much more effectively than any other method of extending.

Why won't my Time Capsule allow me to connect more than one device to the network at a time?

Ok here is the shortest story I can come up with...
Several months ago lightening struck my house and ruined the power cord for my old AIR PORT EXTREME....after replacing the power cable my wireless network began to prohibit more than one device at a time to connect to the wireless network.
I replaced that network with a new TIME CAPSULE and it is doing the same thing. I took my old AirPort Extreme to my work and it works like a charm. My ISP says it is an Apple problem but I have had the same settings both at home and at work. Work is great, multiple devices connect but home is one at a time and in order to connect ANOTHER device I have to power down one, and reboot the router and fire up the device I wish to connect.
Any suggestions?

I am running off a Fiber line....the unit that is a battery back up and appears to be a modem as well is called CyberPower CS24U12V-NA3
Techincally, there is no "router" in my house, there is a LOCKED control box outside, a battery back up module in the garage that shows battery life and connection, then a cat5 outlet in my laundry room..All of which was installed by my ISP.
I am using a 2TB Time Capsule running DHCP in Bridge Mode. I can't find the software version but updated it while installing it within the last two months.
Under Network Tab
Enable NAT Port mapping is checked
Under the Wireless Tab
we have a 5ghz Network
Radio mode is set to: 802.11a/n-802.11b/g/n (Automatic)
2.4 GHz is Auto
5 Ghz is Auto
I hope this helps....

FINAL CUT WON'T ON ON MORE THAN ONE COMPUTER ON A NETWORK

I have a Mac Pro, a MacBook Pro, and a Powermac G5 all connected via airport. I am using all three computers to do video editing using Final Cut Studio, but if I try to open Final Cut on more than one computer at a time, I get an error message syaing that there is already an application running on this network with the same serial number. If I disconnect the computer already running Final Cut from the network, then the other computer will open it, but I need them all connected because I am sharing different photo/music/media files between all three computers. I Paid for Final Cut Studio, and I don't see why I can't use it on more than one computer at a time. Is there a way around this without disconnecting them from the network?

I Paid for Final Cut Studio, and I don't see why I can't use it on more than one computer at a time.
Actually you licensed Final Cut Studio and agreed to the license agreement when you installed those programs.
As it states:
"2. Permitted License Uses and Restrictions.
A. Apple Software
This License allows you to install and use one copy of the Apple Software on one Apple-labeled desktop computer and one Apple-labeled laptop
computer so long as both computers are owned and used by you."

Free goods more than one for a single good

hi gurus
how to allocate more than one free goods for the purchase of one material. answers will be highly apprecieated

hi,
FREE-OF-CHARGE Goods delivered on purchase of a material can be created in transaction VBN1. But it can be only on a 1:1 ratio, hence for one material you can propose only one free good. Read the constraints of Free goods as per SAP Documentataion :
<b>Constraints
Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: With material 1, material 2 and material 3 are free of charge or If material 1 and material 2 are ordered at the same time, then material 3 is free of charge.</b>
Hope i`ve cleared ur query, reward points if so.
Regards

ITune Album Artwork issue - There are more than one for a song

Hi,
I've done this before....having a couple of artwork for one song. It was back when I used iTune 3 or so. Now that I'm using iTune 7. I can't seem to find a way to add more than one artwork to a song. I tried the iTune's help, which says I can just drag another artwork into the song's artwork box. But, that would replace the artwork I had earlier.
Anyone knows a way to add more than one artwork to a song? I'm using 10.4.9 if that helps.
Thanks,
DFguy.

Hi guys,
Thanks for the advice. I tried both in file info and the artwork box (while playing the file) and they both work. I sware to god that they both did NOT work before. That's why I had to post this stupid questions. I don't know why it didn't work before. Maybe because I selected the artwork that's already there? Anyway, now that this issue is solved, I'm very happy!
Thanks again,
DFguy.

More than 1 AX for "extend a network"

Similar Messages

Maybe you are looking for