More than 1 labrary for 1 ipod?

I have a 4th generation ipod and I would like to categorized my albums by genre: hard rock, jazz, new age, reggae ect... is there a way to create a second library.
Another playlist is not what i'm looking for since it lists only the songs 1 by 1. I want the albums listed then the songs, just like the 1st library.
Is there a way to do that?
Thanks

Try the instructions in this article.
(10879)

Similar Messages

CRS Install hostname being used by more than once for the same node.

Hi, we're installing The Oracle Clusterware and on the Cluster Configuration screen of the universal Installer (the one were you specify the clustername and clusternodes) we get the following error message in a dialog box when the next button is clicked:
"You must enter unique values for the public node name, the private node name and the virtual hostname for all nodes in the cluster. The name, node1, that you entered is being used by more than once for the same node."
Has anyone experienced this error message before and know what the cause is?
Could it be a problem with the /etc/hosts file?
Thanks in advance,
M

Make sure you allocate separate IP addresses on your network for the VIP addresses on each RAC node (this is not the same as the machine IP already configured on the OS).
Also, the installer may complain if your private and public IPs are configured under the same subnet.
Finally, as mentioned before, check that name resolution for all the IPs to be used. On all RAC nodes, your /etc/hosts file should be configured with:
- public name and IP addresses of ALL nodes
- private name and IP addresses of ALL nodes
- VIP name and IP addresses of ALL nodes
Hope that helps
B.

Computer has different name than Itunes for Ipod Touch

I have an Ipod Touch 4th Generation 32gb. I have had no problems with it or with Itunes. My Mom came last Saturday to visit and she needed to charge her Ipod Touch so I hooked it to my computer where I always have a cord and charged it for about 45 minutes or so. I have no problem with my Ipod or with Itunes BUT when I go look at the device now on my computer,when it is connected to USB cord, it show "Marys Ipod" now instead of "Steves Ipod". In Itunes, it is still "Steves Ipod" and I can sync and all but I really want to get rid of "Marys Ipod" off my computer even though when I open it up, it is my ipod, just mislabed. I know because it has my pictures and her's is only 8gb. My Ipad2, is fine when I hook it up to the USB cord, It says "Steves Ipad" but when I hook my USB cord to my ipod touch, it still reads "Marys Ipod". Is this something I should be concerned about or is it not worth the hassle of trying to restore, etc? I have tried to change the name, but Windows won't allow. I do have Windows 7. I have also got the new update on Itunes and the new software(5.0) version.
I am stumped. I have googled this and have searched for over 3 hours today on how to fix this. Ready to bang my head against the wall. I have did a reboot on Ipod, I have restarted the computer. I have not reinstalled anything including Itunes.
Does anyone have any suggestions on what I can do? I would sure appreciate the help. Thanks in advance.

shellymoe
Currently Being Moderated Re: Computer has different name than Itunes for Ipod Touch
Jul 22, 2012 12:23 PM (in response to Toploader21120)
I just found the answer to this after hours of searching online. Make sure your iPod is hooked up to your computer & turned on.
Click on "Start" and in the search box type "regedit". This will display a program called "Registry Editor". Open it.
Click on the "Edit" tab and select "Find...". Type "Mary" in the search box and click "Find Next". It will bring up a list of everything that has "Mary" in it. (You may have to click on "Find next" under the "Edit" tab in order to find the associated items that have something to do with both "iPod" and "Mary".) What you need to pay attention to is not the NAME, but the DATA column. For me, the wrong iPod name was listed in 2 places in the data column. The actual names of those 2 items were "FriendlyName" and "Label".
Once you find the associated items that have to do with both the iPod and "Mary", right click on one of them. Select "Modify...". A box will open giving a "Value Name" box and a "Value Data" box. The "Value Data" box should say "Mary's iPod". All you have to do is change it to "Steve's iPod" and click "OK". Repeat the "Modify..." and renaming of the "Value Data" steps for every item that says something about "Mary's iPod".
Close the Registry Editor. Open "my computer" and see that it changed the name of your iPod back to "Steve's iPod".
Best Answer So far.....it really works...Thanks a million

Inbound interface found more than once for outbound interface

Hello everybody,
i have a simple problem.
I build a interface with XI3.0
File to idoc
for each file i need crate 2 idoc.
It's not a problem when Idoc type is different, but in my case i need crate 2 idoc of same type but with a different mapping.
so when i upload the file i have this error:
Inbound interface found more than once for outbound interface
how can i solve this problem? can i force this step?
i thought to create a different idoc type or create the 2 idoc in same mapping , but there is not my favourite solution because in case of error , both idoc will be not created.
any suggestion?
thanks in advance
alex

Hi,
Instead of exporting and changing the occurrence as suggested by Ravi,
use the same Idoc twice in mapping as well as Interface mapping.
Coming to ID part, do every thing as usual.
The only thing to note is instead of using normal Interface determination, use extended Interface Determination.
This will solve your problem. The error will not come again. I'm sure.
Try out and update the thread.
Regards,
Jeevan.

[svn] 3739: Fixing recent change to prelink to not run more than once for compc.

Revision: 3739
Author: [email protected]
Date: 2008-10-19 09:54:37 -0700 (Sun, 19 Oct 2008)
Log Message:
Fixing recent change to prelink to not run more than once for compc.
QE: Yes
Doc: No
Checkintests: Pass
Reviewer: Gaurav
Bugs:
SDK-17411 - Font embedding not working for mxml class
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17411
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java

Revision: 3739
Author: [email protected]
Date: 2008-10-19 09:54:37 -0700 (Sun, 19 Oct 2008)
Log Message:
Fixing recent change to prelink to not run more than once for compc.
QE: Yes
Doc: No
Checkintests: Pass
Reviewer: Gaurav
Bugs:
SDK-17411 - Font embedding not working for mxml class
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17411
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java

Why do i have to pay more than once for my purchased album in itunes, when i download them again?

why do i have to pay more than once for my purchased album in itunes, when i download them again?

Probably because you purchased them again, instead of following the proper method for redownloading apps.
Downloading past purchases from the App Store ... - Support - Apple

My imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I've

my imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I’ve tried shutting it down and unplugging it, and that does not work -- I’ve run disk utilities checked permissions, and run anti-virus and get no adverse results – I cannot figure out what is different that causes this problem

From previous experience 3 indicates a shutdown initiated by the SMC (System Management Controller) — hardware responsible for many low-level functions including power, sleep, lights, and fan activity.
Try resetting it:
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.

Restrict email attachments if more than 1mb for internal and 250kb for external emails

Hi,
Restrict email attachments if more than 1mb for internal and 250kb for external emails ?
Can any one help me in this issue
Thanks
Deepan.T

Hi Deepan,
You can use transport rule to restrict the attachment size.
I use the following transport rule to reject the attachment size over 2MB with "5.7.1" information returned.
New-TransportRule "block large attach" -AttachmentSizeOver 2MB -RejectMessageEnhancedStatusCode "5.7.1"
For more information, here is an article for your reference.
New-TransportRule
http://technet.microsoft.com/en-us/library/bb125138(v=exchg.141).aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

How to sync up more than one iphone/ipod to a PC

I'm frustrated because i've run into a problem and its really cumbersome to fix.
i have several ipods and me and my girl both have iphones (5 ipods and 2 iphones).
we have one PC.
when i sync up my ipod, i can xfer music and videos to it w/o problems but if i connect her ipod it wont allow me to xfer music to it. i can dock it and see it but simply gives me the black cirle with a slash thru it, denies me adding playlists to it.
same with iphone. i literally need 1 PC per ipod/iphone in order to sync up the music and movies we want on them.
how does one copy over their music onto various ipods if you only have one PC. all our music is stored ont he PC. to fix i would need to create a virtual OS, then copy over all my music onto it to sync up but i find it hard to believe that apple did not think of this?
the expected result while using itunes...is to be able to sync up any ipod or iphone to itunes, and be able to copy over any playlist or movie.
i have bought all my dvds and cds and ripped them, whay am i not allowed to place them on more than one ipod or iphone?
Message was edited by: Host

thanks for those tips. i looked at those links. they are helpful but i dont need to create user profiles nor link to other music libraries.
why it fails...when i dock a 2nd iphone it sees data on it....the expected or desired result is, it just leaves data there but allows me to add more. this is the part i cant get past.
i did try making a new user account and multiple libraries, but still same problem.
my ultimate desire is to be able to connect more than one iphone to same PC and xfer data to it and also take the iphone to another PC. so the idea is to move my iphone from work and home and have it sync up with data thats on each one.
the auto sync and auto start when i dock iphone is disabled.
but when i sync up it somehow senses this iphone docks at another PC and does not recognize the media on it as being on this PC.
i deally i dont want to clutter each PC with the same data. i'd like to just keep the music and movies on the iphone and merely add from different PCs. meaning if i dock it at work, it wont have the same music or movies on it. basically i dont want to add redudant files to it that are already on my home PC, i just wish to add music from my work pc to it.
sometimes my wife comes to my workplace and notices i ripped a new album, she wants to dock her iphone and xfer it over, but itunes wont allow it, popping up a message saying she has to wipe it in order to sync up with.
i'm not sure why the ipods wont allow me to sync up music, it sees the device and shows playlists but if i try to add a playlist i get a little black icon stating its denied. i'm not worried about ipd right now. its the iphone i'm trying to figure out, how to get past this problem.
originally it started with one PC to do everything but since we could not we decided to start using our work computers. and now that we sync up to them we cant freely sync up to home PCs now, hence the frustration.
i'm trying to figure out how to use iphones between multiple PCs, single PC. it all seems so complicated yet all we want to do is simply dock, and xfer over data (all PCs are disable auto sync), we jsut want to specifically sync up only particular playlists, movies, wallpapers.
for contacts we gave up on outlook as we get some itunes outlook error about a service failing so we do it via yahoo.
we export out outlook contacts to yahoo and simply use yahoo to merge contacts.

Free goods more than one for a single good

hi gurus
how to allocate more than one free goods for the purchase of one material. answers will be highly apprecieated

hi,
FREE-OF-CHARGE Goods delivered on purchase of a material can be created in transaction VBN1. But it can be only on a 1:1 ratio, hence for one material you can propose only one free good. Read the constraints of Free goods as per SAP Documentataion :
<b>Constraints
Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. Agreements in the following form are not supported: With material 1, material 2 and material 3 are free of charge or If material 1 and material 2 are ordered at the same time, then material 3 is free of charge.</b>
Hope i`ve cleared ur query, reward points if so.
Regards

ITune Album Artwork issue - There are more than one for a song

Hi,
I've done this before....having a couple of artwork for one song. It was back when I used iTune 3 or so. Now that I'm using iTune 7. I can't seem to find a way to add more than one artwork to a song. I tried the iTune's help, which says I can just drag another artwork into the song's artwork box. But, that would replace the artwork I had earlier.
Anyone knows a way to add more than one artwork to a song? I'm using 10.4.9 if that helps.
Thanks,
DFguy.

Hi guys,
Thanks for the advice. I tried both in file info and the artwork box (while playing the file) and they both work. I sware to god that they both did NOT work before. That's why I had to post this stupid questions. I don't know why it didn't work before. Maybe because I selected the artwork that's already there? Anyway, now that this issue is solved, I'm very happy!
Thanks again,
DFguy.

Why the "Basic" crawled properties appear more than once for each property name?

When i map a managed property and want to select for example "Basic:9" - i see 2 lines of "Basic:9".
why is that so? are there more than one "Basic:9" property?
keren tsur

Hi keren,
The properties have different types, Basic:9 which has mapped to Path is Text type, the other one is Yes/No type. You could refer to:
http://technet.microsoft.com/en-in/library/hh134087(v=office.14).aspx
If you would like to know about Crawled property data types, please refer to:
http://blogs.technet.com/b/speschka/archive/2010/08/21/finding-which-crawled-property-data-types-match-a-managed-property-data-type-in-sharepoint-2010.aspx
Regards,
Rebecca Tu
TechNet Community Support

No more than 8Mbps for writing files with TC !

Hello,
I just buy a brand new TC 3To. Internet bandwith is great (more than 80Mbps), but no more than 8 Mbps for writing a file between my mac and the Time Capsule.
How can you explain that ?
Thx

Test it with ethernet not wireless if you are on wireless.
What computer are you copying the files to the TC with? What OS and how are you copying?
Is it one large file or a bunch of small files.. the later can be really slow due to time it takes to write allocation table info, cf the actual copy.. the best test is one very large file.. 2GB or so that you copy.. Make sure you do not copy files to the sparsebundle that TM made.. Make sure TM is not running when the files are being copied.

Why Pay More than $99 for iPhone 5?

I just do not know the cellular industry at all. I have been very pleased with my Verizon account for many years.
Why are there 16GB CDMA iPhone 5 on eBay for $200, $300 and more - when one can purchase a new one from
Verizon for $99.95? Can the eBay ones be used with a SIM card globally? What can be done with an eBay
$200 16GB iPhone 5 that I could not accomplish with one from Verizon? I do not travel overseas - just stay in
California.
Thank you.
Clint Bradford

They need to go to THE CDMA carrier the phone was sold for. CDMA iPhones are not portable between carriers.
Yes, they still need to activate and pay for a voice and data plan to use it. But they are not locked into a 2 year contract. They can use it for 6 months and cancel service if they want. They can sell it to someone else who can use it for 6 months on Verizon, or for the next year, or 2, or 3.
If you get an iPhone from Verizon on contract, then cancel the service after 6 months, you owe an early termination fee that is quite a bit more than that.

Can I pay more than $25 for verizon edge?

I want to pay $50 so that once January hits I can get an iPhone 5s. I currently have the Droid Ultra (Red). I love android I've had it all my life but now I'm going to switch to iOS. So can I do that? Pay $50 instead of just $25? I read that you can't and that yo will just have to pay like $200 when you want to get the new upgrade. Is it true or...?

No. You cannot.
Read this.
http://support.verizonwireless.com/support/faqs/Equipment/vz-edge.html
Can I pay more than my scheduled monthly Verizon Edge installment?
No, unless you are either seeking to Edge Up to a new device, which requires that you pay at least 50% of the device following the initial six months of the Verizon Edge Agreement, or you are seeking to pay off 100% of your Verizon Edge installment agreement, which you may do at any time.

Is it possible for Apple to make one more software update for iPod Touch 3G to fix the music library?

My iPod Touch 3G is running ios 5.1.1 and the music library isn't aphabetical. It's all messed up. I could post a picture if needed. I wanted to see if Apple could create a ios update just to fix this.

I doubt it. Based on past experience once Apple stops updates for a mode iPod there are no more. This is based on the 1G and 2G iPods.
You are not addressing Apple here. We are all just users like yourself.

More than 1 labrary for 1 ipod?

Similar Messages

Maybe you are looking for