MORE THAN 1 OF THE DETAIL FOLDERS USES NON-AGGREGATED ITEMS

What does this join configuration message mean? I am a user not an administrator but I notice that sometimes I get this message when I am trying to create reports in Discoverer.
Currently I have a report that is using a control table and a detail table. I need to link to another table (not a detail table). The join did not exist but I was able to take a transaction and join to the table with sql. I asked that this join be created in Discoverer so I can link to the other table in the report and it was created, but when I go to pull in the field I need I get this message:
Join configuration cannot be resolved. Reason: more than 1 of the detail folders uses non-aggregated items.
Can this be resolved and if so how? We seem to get this message fairly often.

I am always leery of disabling fan traps, as it can cause errors with aggregation (and by errors, I mean including values multiple times). Make sure you check the documentation (the Disco user guide) for an explanation of fan traps, and the types of problems that can occur, and the check the results of your queries (or have the data owners do it) to make sure the results are valid.
I use the fan trap warning as an indication that there is something amiss in the BA, and then try to find the problem there. Sometimes the solution is changing a join (you can check the box that states there is a 1 to 1 relationship and that will also eliminate the fan traps), other times it is creating a view or custom/complex folder to specify how the data is to be joined. Rarely is the only solution to disable fan traps (and while I am on my soapbox, I'll add that I use it as a last resort).
Sometimes removing fan traps is the correct solution, but you need to test your reports to make certain the results are valid.

Similar Messages

Workbook having non-aggregated items

When I created a workbook for a client using Discover 4.1 user edition I encountered a problem stated "join configuration can not be resolved. Reason: more than 1 detailed folders uses non - aggregated items. How can I resolved this issue??
Thanks

The Administrator should try to set up the joins such that the relationships are defined in terms of going from the Dimension to the Fact. For Relational Schemas, try to define the joins so they originate from the "one" side to the "many" side - assuming a 1-m relationship. This has provided some measure of success in resolving the join/non-aggregate items problem, but I must admit that it doesn't appear to be a Total solution. I suspect there's more to it than what I've just described, because I still encounter the error under certain conditions. I'm usually able to select from the available joins I've defined such that I can build workbooks with the elements the client wants to see. But ideally, you shouldn't have to go through the process of identifying the "correct" join definitions - especially if the clients are attempting to build their own workbooks. If anyone has additional information that would better clarify the problem/resolution, I'd be happy to hear about it.

We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
Appreciate your support and if possible , how to do this?

If you want to work with Mac OS X, you need one computer per simultaneous user.
What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

Is there a way that I can see more than just the next slide in Presentation mode (as an old version of PowerPoint used to do)?

Is there a way that I can see more than just the next slide in Presentation mode (as an old version of PowerPoint used to do)?

Sorry - should have been more specific. As far as I can see, Keynote will only allow me to see the current slide and the next slide on my laptop when I am presenting a slideshow through a projector. But an old version of PowerPoint allowed me to show the current slide....and (adjustable) many more slides ahead (say 10)....so I could simply jump ahead to a 'future' slide and skip several slides in between. Net result being that I was able to matcgh my slides to group discussions rather than stick to a fixed, predetermined slide show.
As much as it pains me, without this facility - PowerPoint (old verson, not current one) is more useful for me! :-((

How can i purchase a macbook air in Nigeria? apple has no shop in the entire country and independent dealers charge ridiculously sometimes more than double the prices of mac products without guarantee of getting it with required specifications. its sad cl

how can i purchase a macbook air in Nigeria? apple has no shop in the entire country and independent dealers charge ridiculously sometimes more than double the prices of mac products without guarantee of getting it with required specifications. its sad cos Nigeria has a very large apple market plus phones and most recently ipads especially. its been frustrating trying to get a macbook, even have to wait for when someone will travel out of the country, then you send the person(thats if you have the money at that time). Please somebody help inform apple maybe they can do something about this, its really disappointing.

This is a user-to-user technical support forum. You're not addressing Apple here. Use the apporpriate link on fhe Feedback page to let Apple know how you feel:
http://www.apple.com/feedback

I installed lv 6.1 on a windows 98 system. As I am having problems of stability (much more than with the former release 6.0), I would like to know if there is some specific problem with windows 98 or there is some patch.

I installed lv 6.1 on a windows 98 system. As I am having problems of stability (frequent crashes, much more than with the former release 6.0), I would like to know if there is some specific problem with windows 98 or there is some patch available.

My experience with Win98 is that it is not a very stable system, regardless of software used. For example, Win2000 and XP are far more stable than 98. I've had it crash on its own if I leave the computer on for several days.
I wouldn't recommend running programs for long time (few days) on this OS.
This being said, can you be more specific in your question. What kind of stability problems did you have, which VIs did you run (if possible post them here), did you change the interrupts and priority levels on those VI, do you get error messages or blue screen....
Zvezdana S.

I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" it my old username before changing it.

I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" my old username before changing it showed the correct username? please any help would be great.

Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
When you're done, turn TM back ON and close its preference pane.

___When I have a multi page Ai file and 'Save as', it saves more than just the page I specified

When I have a multi page Ai fil e (50 pages) and 'Save as', it saves more than just the single page I specified (ie. Range 1-1)... it saves all 50 over again? How do I just save 1 of the 50?

Just answered my own question - if I use 'Save a copy' it works... must be a glitch

Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can use and it refuses to respond for a period of time

Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can use and it refuses to respond for a period of time

Hi
Yes you can delete the expired certificate which are showing as it is not functional anymore and they remain as stale entries
You can use below command
Remove-ExchangeCertificate -Thumbprint "specify the value "
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

When ASM reads my block, it will usually read much more than just the block I requested.

When ASM reads my (8K) block, it will usually read much more than just the block I requested.
4 questions :
1) Am I right when I presume ASM will increase my request to 1 complete AU sized retrieval action done on the I/O subsystem?
2) Now what interests me is where does the rest of that I/O size sleep / reside ?
3) Under what circumstances will those poor, initially unused and discarded KB's be revived and be reckognized for their true value. Will only certain actions, like a scan, cause the 'overhead' to be used ?
kind regards, Niek

Hi Aman,
ASM does not do IOs .
ASM only gives extent map to clients and clients take that pointers and do direct IO on that block.
This is very much true statement and explains what will happen if data block is not available at buffer .
That's why most of IO errors are getting printed on rdbms alertlog file ,rather ASM .Which inturn confirms my statement...
ASM level DBWR ,LGWR are related to ASM level data processing .
Keeping above things in mind ,it clarifies ASM does not hold any IOs /place on sleep.
ASM at diskgroup level,always does IOs as per au_size of that diskgroup .
Regards,
Aritra

How do i get my i phone to show more than just the apple symbol?

how do i get my i phone to show more than just the apple symbol?

Welcome to the Apple Community.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi.

Can I store more than One value in HashMap using Same kay?

Hi,
I want to store more than one value in HashMap using same key................. is it possible?
If yes, then please give me source code for that.....
Thankx in Adv.......

I want to store more than one value in HashMap using >same key................. is it possible?I don't think so
Message was edited by:
manuel.leiria

To determine the Queries which uses Berfore Aggregation

Hi,
Is there any best way to determine the Queries which uses Berfore Aggregation properies like any table which has information of all the calculated key figures which uses Before aggregation properties.
Otherwise how can we determine the same using RSRT.
Please help.
Thanks
Bhanukiran

Hi,
Below listed are the tables related to queries. See if you get this information in any one of those...
RSZELTDIR     Directory of the reporting component elements
RSZELTTXT     Texts of reporting component elements
RSZELTXREF     Directory of query element references
RSRREPDIR     Directory of all reports (Query GENUNIID)
RSZCOMPDIR     Directory of reporting components
RSZRANGE     Selection specification for an element
RSZSELECT     Selection properties of an element
RSZELTDIR     Directory of the reporting component elements
RSZCOMPIC     Assignment reuseable component <-> InfoCube
RSZELTPRIO     Priorities with element collisions
RSZELTPROP     Element properties (settings)
RSZELTATTR     Attribute selection per dimension element
RSZCALC     Definition of a formula element
RSZCEL     Query Designer: Directory of Cells
RSZGLOBV     Global Variables in Reporting
Regards,
Yogesh

The info supplied does not show how to delete more than one bookmark, only folders

I read the info provided online for deleting more than one bookmark/folder but it doesn't show how for multiple bookmarks. My OS is XP. with updated Firefox version.
When I go to Bookmarks>Show All Bookmarks, there is no listing of the ind bookmarks, only the folders.
Whoever used this pc before had lots and lots and I do not want to have to delete them all one-by-one.
Please advise---

''Library List only shows Folders, how do I delete bookmarks''
Usually one deletes a lot of history items so the techniques were described in the history areas by including some pictures. The techniques work the same for bookmarks.
You can select '''multiple entries without invoking the bookmark''' for dragging, copying, moving or deleting, (similar to how you can [http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox#Selecting_history_items select multiple browsing history items]) with use of the Ctrl''/Cmd'' key (to add to a selection) & Shift key (to extend a selection) by clicking to the '''left''' of the favicon (webpage icon) in the list to make selection(s). To extend from the last selection made of dis-contiguous entries use Ctrl''/Cmd''+Shift+click. Makes moving several bookmarks from different places to a new location easier as well, and of course for your interest in deleting bookmarks.
Whether you are selecting from the Side Panel or from the Library List, you generally want to start with a search specifying one or more strings within Titles, url/location, or tags. The search with strings of characters works the same in the Location Bar (before Enter known as the AwesomeBar feature), and in bookmark, history and tab searches.
Within the Library List you will only see bookmarks by selecting a folder, or by doing a search.
Articles: (read entire articles but am pointing to specific areas)
*http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox#Selecting_history_items
*http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox#Bookmarks_Manager_or_Library_window
*http://kb.mozillazine.org/Location_Bar_search#Location_Bar_search_.28internal_-_Auto_Complete.29
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.<small>

Can more than one ipod touch be used on the same computer

Have a new iPod touch-4th gen. Have iTunes already on computer, for a 3rd gen. Updated to lastest version of iTunes. New iPod is not showing up at all anywhere.

More than one ipod on same computer is possible: http://support.apple.com/kb/HT1495
See if this helps in getting the other recognized in itunes:http://www.apple.com/support/ipodtouch/assistant/itunes/

MORE THAN 1 OF THE DETAIL FOLDERS USES NON-AGGREGATED ITEMS

Similar Messages

Maybe you are looking for