More than 1 SMP per site

Can we have more than 1 SMP per site?suppose I have 1 primary site with 2 secondary site, is it possible to have more than 1 SMP for USMT per site?. One of customer have around 40 distribution points and they are expecting to have same DPs as SMP as well
i.e. 40 SMPs....Any pointers will be appreciated. Thanks
regards,

To add-on to Jason, there has been a little change since R2 (at least according to the documentation):
Prior to System Center 2012 R2 Configuration Manager, all site system roles at a secondary site must be located on the site server computer. The only exception is the distribution point. Secondary sites support installing distribution points on the site
server computer and on remote computers.
Beginning with System Center 2012 R2 Configuration Manager, the state migration point can also be installed on the site server computer or on a remote computer, and can be co-located with a distribution point.Reference:
http://technet.microsoft.com/en-us/library/gg712282.aspx#Plan_Where_to_Install_Sites
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Similar Messages

I have used the "description" spot in iPhoto for in-depth additional information for photos of my ancestors. Now I am wanting to know if there is a way to print the photos along with the descriptions; either photo by photo, or maybe more than one per page

I have used the "description" spot in iPhoto for in-depth additional information for photos of my ancestors. Now I am wanting to know if there is a way to print the photos along with the descriptions; either photo by photo, or maybe more than one per page, or possibly in some sort of booklet format. Thank you very much.

You can make a Book and have a photo on one side and your text description on the other.

-setFence:count: called more than once per transaction

I am getting following error, any body have any idea what it is?
-setFence:count: called more than once per transaction
Debugger stopped.
Program exited with status value:101.
Thanks in Advance
Ravi

I am getting the same error...
T'is usly a m'ry error.
Use the debugging/testing tools in the latest Xcode to track down suspects, etc.

Can I launch more than 5 web-sites using Muse? how?

Hi,
Can I launch more than 5 web-sites using Muse? how?

You can use Muse to design and build as many websites as you wish; just purchase the URL's and hosting as appropriate. Your subscription to Muse allows for unlimited authoring.
Now, if you're referring to support via Business Catalyst, that's a different story...

Is more than one Central Site in the same AD site supported?

Working with a customer here, and they will be hosting 250,000 accounts for Lync 2013, and I know that a Central Site can only host 240,000 accounts. Knowing this limitation, can more than one Central Site be located within the same data center? I would
think that separate subnets (AD Sites) are all that is required.
Is it this simple?
Thanks,
Christian
Christian Frank

I haven't looked at the limits of a site, because I've never had to go that high. Can you reference where you found that information? Is that an actual limitation or just a limit of the capacity planner?
http://technet.microsoft.com/en-us/library/jj205120.aspx
I couldn't find reference to it in the user models which is why I ask if you have more information:
http://technet.microsoft.com/en-us/library/gg615015.aspx
I'm not challenging it, I'm just unaware of it. What modalities and roles would you be supporting?
And you could split the pools into different sites if needed, that should get you around the limit if it exists.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Video - can you have more than one per session?

Can I have more than one video in a logic session - like one at the top of a session then 5 minutes later drop another in? I know Pro Tools has multiple video tracks. How do composers out there deal with new cuts etc?

ProTools can do it, Cubase can do it, Digital performer (I think) can do it, ....
Logic can NOT do it. Only one quicktime clip per project at a time.
Logic is owned by Apple which created the Quicktime standard but still they haven't figured it out how to implement that into Logic. Maybe the Logic developers should just pick up the phone and ask the guys over at ProTool how they did it.

Redo Log Files - more than 12 per hour

Hello @all,
I have a problem with my redo log files. I get more than 12 switches per Hour. I have 3 Files with 5oM size. I increased the sitz to 15o M, but
I still have 12 switches per hour.
Do anyone know, what I did wrong?
Database:
Oracle 9i
Thanks
Martin

user9528362 wrote:
Hello @all,
yes I know, that 3 switches per hour are perfekt, but I had increased the Size from 5o M to 15oM already and the amount from switches, are not reduced.
So there must be something else, that causes the log switches.Martin,
As I said somewhere above too, 150meg is a tiny size if you are managing a production db. I have already mentioned that make your log file size to at least 500meg and than check. As for the high redo activity, only you can confirm that whether this has been started from now only or was happening before too? In anycase, for an active oltp, 500 to 1gb of redo log file size should be okay.
For the extra redo generation, you have been given link for mining log files using logminer. Try using it to see what is causing extra redo.
HTH
Aman....

How can I check the number of lines per inch in my document (I need no more than 6 per inch!!)

I need to produce a dopcument in New times Roman with a minimun of 12 ot font size, single spaced and , with no more than 6 lines of type per inch?
How can I check that I do not have more then 6 lines per inch?
thanks in adavance!!!

If this is about Pages for iOs, you can certainly set TNR adn 12 pts, but no, there is no lines per inch settings.
If this is about Pages for OS X, you are in the wrong forum.

Slow (no more than 7 per minute) sent emails in a status update for many situation

We have a new Exchange 2010 system and the need of nightly status for a large number of customers.
Initially, I simply increased the number of mails the involved email accounts could send and that allowed them to deliver.
The problem then was/is that they are still limited to about 7 mails per minute.
At this stage I increased the connection throttling from 20 to 2000, though the average of 7/min is still the norm.
Here are commands I used for throttling increase:
New-ThrottlingPolicy -name 2000EmailMaxConcurr -RCAMaxConcurrency 2000
Set-Mailbox address1 -ThrottlingPolicy 2000EmailMaxConcurr
Set-Mailbox address2 -ThrottlingPolicy 2000EmailMaxConcurr
have read of other efforts, but though assistance rather then cluttered rule implementation was in order.
Anyone have a similar issue and solution?
In my last mass mailing instance, a 2003 installation, I do not recall having to alter the default to allow more than 7 emails per minute from an address.
Thank you in advance for any assistance-
Stuart
Stuart TechnoFile

Ed,
Yesterday I confirmed ThrottlingPolicy of -RCAMaxConcurrency $null applied to
the appropriate email addresses.
This morning, the report of Monday night's emails stil listed 7 per minute.
Time Started
Time Ended
Emails Sent
Total Minutes
Average Emails Sent Per Minute
10/14/2014 12:30:37 AM
10/14/2014 8:46:24 AM
3734
496
7
As you can imagine, this is creaping into normal business hours and that is undesirable.
What can I try next?
Thanks-
Stuart
Stuart TechnoFile

If I visit a site more than once per day, that site comes up with plugins that don't work and a very altered display without photos or graphics-- can fix this by erasing all cookies and history, but am often required to do this 5x per day

So far have experienced this apparent reversion to HTML caches with my blog on Wordpress, Ebay and http://coloncancersupport.colonclub.com/viewforum.php?f=1
Updating to latest Firefox did not solve problem.
Cannot connect to firefox live chat

I'm having a little trouble understanding the part about your password having to be reset. Why is that happening??
Let's start with Firefox's settings:
(1) You can configure the password manager feature on this tab:
orange Firefox button (or Tools menu) > Options > Security
There is a checkbox to enable/disable the feature.
There also is a "Saved Passwords" button to review and remove any passwords you do not want Firefox to keep.
That tab also has a feature to set a Master Password so that no one can use your saved passwords without knowing the Master Password. You may need to exit Firefox in order for Firefox to ask for that again.
Related articles:
* [[Password manager - Remember, delete and change saved passwords in Firefox]]
* [[Use a Master Password to protect stored logins and passwords]]
(2) Site-specific permissions
If you want to use the password manager for other sites but NOT a particular site, you can configure that in the Permissions Manager.
In a new tab, type or paste '''about:permissions''' in the address bar and press Enter.
After the page loads, use the search box in the upper left corner to narrow down the list to the site you want to configure. Highlight the site on the left side, and on the right side, choose Block under Store Passwords.
(3) Form autocomplete suggestions
Separate from passwords, Firefox remembers entries you've made into forms (in most cases) and lists the matching ones below the form field in a drop-down.
To clear a suggestion, press the down arrow key to highlight it and press the Delete key.
To turn off this feature, see this article: [[Control whether Firefox automatically fills in forms with your information]].
To review and selectively edit or delete form history entries, you need an add-on. For example, you could try this one: https://addons.mozilla.org/firefox/addon/form-history-control/

Browser does not seem to prompt for more than once per session, to accept untrusted sites. I have to close/open firefox to visit multiple untrusted sites in one sitting. Is there a way to fix?

I use firefox to connect to the console of different Sun/Oracle servers. The www pages are "untrusted" and I get a question to continue to connect or not. When I say continue, it pops up a window to either accept or deny the cert. This window, once I accept it, to continue to do my work. When I'm finished with that server and continue to another one, that window no longer pops up for me when another untrusted www page is loaded. But when I quit firefox, and then revisit the page, the dialogue pops up and I can accept the new cert and continue to work.
I'm considering going back to the older version of firefox as this is severely impacting my day to day use of it. I'm still trying to see if I can get around it by fiddling with different firefox options.

Thanks. I tested it, and found that I can create a bookmark in FolderA, and them manually copy it to FolderB, FolderC, and FolderD.
Once that is done, I tried the old method of "Bookmarks" --> "Bookmark This Page" and added it to FolderE. When I did that, it deleted the copy in FolderD but left the other three alone!
This is fine with me. I personally think this is a bug, because I don't think that Firefox should ever delete a bookmark without asking me (or at least, informing me). But now that I understand the algorithm, I can work around it. Thanks!

How can I have more than one mobleme site?

I currently have two registered domains with godaddy.com and created a website with one of them on iweb and published it to my mobile me account. However I want to create a second website on mobleme. I have another domain that I want to use and publish to mobleme, but have discovered I can't. It appears that I can have only one domain registered to mobileme. Is there anyway of add my other domain and also host it on mobileme under another name other than the one I already have?

You can have only one domain re-directed to MobileMe via CNAME. You can have more domains re-directed to MobileMe via Web-forwarding — with or without masking. Read more here:
http://iwebfaq.org/site/iWeb_Domains.html

CF Developer Edition - more than one local site?

I have the local developer edition of CF8 installed on my home machine, and I've basically used it to duplicate my work environment. Unfortunately, I now have a second work environment, so I need a second local site set up. While this is no problem in Dreamweaver, it seems to be quite the problem with CF, as all my includes are relative via the site root (i.e. /includes/whatever.cfm).
Is there any way to set up a second local site with CF? Like on a diffetent port or something?

To answer your first two questions:
The reason they're getting Enterprise (at least that's what I think they're getting) is that someone in the IT department has likely been convinced that it's the most secure. This is the same reason they won't use Express - "It's free, so anyone can download it, install it, and figure out how to hack it". I kid you not, that's exactly what the head of IT security said to me, with a straight face.
And coping with Access? It was a chore, but I think in the end it forced me to write more efficient queries, because all my CF/Access stuff runs way better (and faster) than the .NET/Oracle stuff we have on our apps servers.
The problem with setting up a Server 2008 machine is that I just don't have any room for a 3rd PC in here. I have my primary PC (Linux) that I do 90% of everything on (mostly personal), and the Win7 machine, which was supposed to be my "kicking around" machine. I'm using it more now because my office finally set up SRA, and getting SRA to work on Linux has not been horribly successful.
I don't really want to set up a development environment that matches my office as much as I just want to play with MS SQL (and upsizing databases, etc). I do want to be able to do some stuff though, in case SRA is down. I also want to get my wife's website set up locally so I can work on that. I'd set her site up on my Linux machine (already have MySQL and CF9 on that) but I really like using Dreamweaver.

How do I get Firefox to display more than one web site that I am developing using Localhost command?

I write the html code for the four web sites I develop and the one I maintain. I want to view the sites before I put them on the internet. I am able to do this with only one of the five. What, if anything, to I have to change in the browser to allow me to do this? I have edited the host file to include the names of the files on my computer of each of the sites. What should I do now?

You'd like to be able to access each site with its own locally-hosted url, correct? (for example- http://localhost1/, http://localhost2/ etc, )? That's a ''server'' setting, rather than a browser one.
How it works will depend on what software you are running to serve the pages. ''Apache'', for example, uses [http://httpd.apache.org/docs/2.2/vhosts/ Virtual Hosts] (and in this case, specifically [http://httpd.apache.org/docs/2.2/vhosts/name-based.html Name-based Virtual Hosts] ). There's usually an example in the configuration file to experiment with (be sure to back it up first).

Latest upgrade of itunes doesn't start up more than once per boot.

Since the latest upgrade (can't tell what version without rebooting my laptop), iTunes will only start up once per uptime session. If I plug in my iPod Touch, it will start up automatically just once, or if I start by selecting the Start Menu item to run iTunes, it will only start up once. After iTunes is closed, I must reboot the PC if I want to use iTunes. This is with Win7, but it takes me back to the early days of Win95 or ME - ahhh what memories! I'm glad that I can look at that as being in the past, but when it happens right now, I'm not particularly glad.
I can see that the iTunes Helper is running, and even iTunes.exe is running, but there's no program window visible, no icon in the tray... it's not running as far as I can see, and it's not very useful in that state. I can't see any way other than this of letting Apple know that they've trashed the new version of iTunes as far as my computer is concerned. It's just rather unhandy to have to reboot each time after I've finished using iTUnes. As a friend of mine used to say, there's nothing so unhandy as a handy thing that doesn't work...
Help?
Blessings,
Duff

And that's true for the latest version as well - no change. The process never goes away after I close iTunes - it just hangs around slowly getting bigger and bigger memory-wise. Plug in my iPod Touch, and nothing happens - no synch, nothing. If I kill off the process, then plug in the iPod, iTunes does start up, but it just hangs there, and never becomes truly running and useful. So, I don't know what "fix" broke my iTunes, but it's still requiring a reboot to get it working after it's been used once and closed. At least Win 7 boots pretty quickly on my laptop...

More than 1 SMP per site

Similar Messages

Maybe you are looking for