More than 160 characters in each text message
I don't get why Verizon made the switch for every other phone to be able to text more than 160 characters, but not for blackberrys.....
BlackBerry Messenger has more than 160 characters. Unlimited, maybe??? On my BB, two or three texts in a row show all together like one text. Do yourself and others a favor and either learn some texting shorthand, or learn how to get to the point. long texts are very annoying. SMS stands for Short Messaging Service. I try to remember that when I text. In my personal experience, I say wat too much whenever I send long texts. And once its sent, there's no taking it back!
Similar Messages
-
Verizon, Texting more than 160 characters
I got my phone a couple months ago and noticed the blackberry doesnt let u txt more than 160 characters. however yesterday while on the subway, i hit reply to a sms txt message, and instead of saying 160 at the top. it said 124 of 1/6. and i kept txting and it let me text more than 1 page. i went to verizon and asked them about this and they said it must be a glitch, but i dont understand how its a glitch if it did it in the first place. and so im wondering if there is a way i can get it to txt more than 160 characters in a txt message.
thanksThe same thing has happened to me a couple of times. It gave me the option of 1/6 pages with 124 characters on each page. I've been meaning to go to the VZW store and ask about it but i guess they would just tell me the same as you. Have you heard/found anything else about it the matter? It won't even allow you to send more than 160 to another verizon carrier! I've never had that problem with any phone and i had a curve and i currently own a tour and both have done it in the period span of possessing them. Actually, i think the tour did it around the same date of your occurence. BB mess up? I have no clue. But, i really liked that concept. Why isn't it just an option. It's rather stupid. Either way i thought it was weird that we have had the same exact thing happen around the same time of the year but I also had it repeat the "glitch" a couple of times afterwards. There has to be a way to make that permanent. Or, at least, i hope.
-
How to put more than 1200 characters in a text form within a pdf created in Adobe Acrobat
I need to know how to put more than 1200 characters in a text form within a pdf created in Adobe Acrobat. I have a request from a customer to do so and after googling I have came up with nothing. Also the customer would like it if they could convert said pdf form to a microsoft word document with the text form.
There's no limit on the number of characters you can enter into a text
field, unless you set it as such. -
Maybe this has been answered but i cannot find it through search. When will BB support auto brakin up of sms texting longer than 160 characters. I have 6 smart phones in my family, all from different manufacturers plus another for my work and all of them will automatically send out any sms message longer than 160 characters as seperate texts with a 1 of 2, 2 of 2 listing. No annoying field is full message. I know beyond 160 can be purchased but this should be fixed already. Does version 5 OS resolve this? If so i will have to wait for sprint to get off thier butts and approve it for the BB curve. Thanks
Anyone who's texting more than 160 characters is either using a third-party app (such as is available in AppWorld) or is using BlackBerry Messenger. The 160 character limit is a carrier-imposed limitation which is pretty much industry-wide (the shorter the messages, the more messages need to be sent, the more money they make).
I'm not sure of any such apps by name, but if you go to AppWorld and search under IM & Social Networking>Instant Messaging, you should find some that will accomplish getting around the 160 character limit. I believe what they do is to split your long message into two smaller messages, but atleast it saves you from having to stop typing after 160 characters.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated. -
Why is my iPhone 4S breaking up SMS messages that are shorter than 160 characters?
With my iPhone 4S running 5.1, I'll tap out a message that reads on the character counter as less than 160 characters. When I press send, I hear the "sent message" swoosh sound happen twice, as it does when the phone splits a long message into multiple parts.
The recipient confirms that the message does get split into two parts even though its contents did not exceed 160 characters. Through some experimenting, I have determined that it happens with messages that exceed 120 characters. In cases of messages with lengths 120-160 characters, it cuts the last word off and sends it as a separate message.
Why is this happening?
(In addition, checking my Google Voice history also confirms that the messages get split up even though they do not exceed the character limit.)I'm having the same exact issue. I've only noticed it since I upgraded to IOS 5.1. Unless the SMS message is very short, it gets broken into at least two separate messages when I hit send. I think this is happening even if the message I'm sending is less than 120 characters.
It doesn't bother me either, but like AmZam05 mentions, I feel bad for the recipient who is now getting mulitple SMS messages from me when they would get a single SMS message prior to me upgrading to IOS 5.1.
EDIT: Wanted to add that this is with a Sprint iPhone 4S w/ IOS 5.1. I've also found some forum threads elsewhere speaking of the same problem others are having. There seems to be a "workaround" for this by adding a few blank spaces at the end of your SMS text message, then sending it. -
More than 255 characters in a table text field
Dear experts,
i am facing a problem (in WD Alv too) that i can not display more than 255 characters in a single text field.
I want to display a table containing a description field without a limitation of its length. As soon as providing a (formatted) string longer than 255 characters of length, no interactive form is shown on screen.
Debugging a while, the following error message occurs;
ADS: com.adobe.ProcessingException: com.adobe.ProcessingException: XMLFM Exception - PDF render operation exception, reason code: 0 : InvalidXDPException: Xml parsing error: reference to invalid character number (error code 14) ...
Does anybody have similar problems to mine?
Did anyone resolve the issue to show more than 255 characters in a table in interactive form?
Regards,
Florian Royer
Edited by: Florian Royer on Feb 11, 2010 2:48 PMCALL METHOD lr_service_manager->retrieve
EXPORTING
iv_bo_name = 'cPro_Project' "lv_bo_name "cPro_Project
* iv_bo_name = cl_dpr_api_co=>sc_bo_cprojects "
iv_bo_node_name = 'Longtext.Root' "lv_bo_node_name "Longtext.Root
it_keys = lt_ltext_key
iv_edit_mode = '0' "iv_edit_mode "0
IMPORTING
et_data = lt_longtext_mast
et_failed_keys = lt_ltext_key_fail.
READ TABLE lt_longtext_mast INTO ls_longtext_mast INDEX 1.
MOVE ls_longtext_mast-longtext TO ls_action_item-zz_description.
This is how i get the text with format (line feeds).
zz_description is type string.
My table is on a page, wrapped in a subform. and zz_description is type text field.
Yes, i maintained "allow multiple lines" and did not limit length somehow.
The problem arises in portal, pressing the preview button of a zform. providing a string <255 characters of length, everything works fine.
Edited by: Florian Royer on Feb 11, 2010 3:10 PM -
How to send text file as an email attachment havin more than 255 characters
My requirement is to generate a text file and to send this text file as E-mail attachment. I am using FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' to send the E-mail. but here the limitation is the number of characters per line must not be more than 255 characters whereas in my case it is exceeding 1000 characters per line. could anyone please suggest me what should i do now ? Each field in the text file has to be tab delimited.
Simplest might well be to use javamail API instead of the two tags that Sites provides, e.g. see email - Sending mail attachment using Java - Stack Overflow for a full example.
Phil -
Display message wwhich is more than 72 characters
Hi Experts,
I wanna display message which is more than 72 characters.
is there any way in ABAP to display such type of message?create message class, in message give & & & &.
now you can pass the display message like this.
message i000 with text-001 text-002 text-003 text-004. -
To display status message more than 50 characters
Hi Gurus,
I want to display status messages (not as a pop-up message) holding more than 50 characters.
Please suggest me some solution to achieve the same.
Thanks,
AshaTry:
REPORT ztest NO STANDARD PAGE HEADING LINE-SIZE 80 MESSAGE-ID 00.
DATA: f1(50) VALUE 'I am the very model of a modern Major-General,',
f2(50) VALUE 'I''ve information vegetable, animal, and mineral,',
f3(50) VALUE 'I know the kings of England, and I quote the',
f4(50) VALUE 'fights historical,'.
MESSAGE s001 WITH f1 f2 f3 f4.
Rob
Edited by: Rob Burbank on Feb 10, 2012 4:41 PM -
I want to display message more than 50 characters
hi experts
i want to display message more than 50 characters, and the fm 'POPUP_DISPLAY_MESSAGE' can display just 50characters, my message maybe much long, what other fm can i use?
btw, i cann't use POPUP_TO_CONFIRM to let user select, the popup screen should only have one button to let user type in.thanks for ur reply,
but 'POPUP_TO_DISPLAY_TEXT' just has two lines(every line has character limit), my message to be displayed may be much long.
why i need the fm is that, i want to display error message when user made error operation, if i use 'message msg type 'E' ', the message display in the status bar at the left-down place and cann't display the whole message if the message is to long.
so i had like to find a fm like 'POPUP_TO_CONFIRM' which can display multipul lines and just with one button(which is the user required...). -
More than 255 characters need to be populated in text file of destination.
Dear experts,
i am having following scenario in which i am sending the file to a destination system through RFC connection which is having more than 255 characters, But it is not allowing me to enter more than 255
The code i have written is mentioned below,
lv_string = '///++++#####$$&&^%$%@$$@@(&@&@#%@&%#464(@)))(@&@&&@*&@)@(&@@%&%&@&@*@&@&&*@&*****^&&*&%$%$$#$##@#$@%%&&*******(((((((((((((((&!@#$$%%%&&(()))_(**&&&&&^^^^%%%%$$$$###'.
itab-l_string = lv_string.
CONCATENATE itab-l_string itab-l_string itab-l_string into itab-l_string.
CONDENSE itab-l_string.
Append Itab.
call function 'RFC_REMOTE_FILE'
DESTINATION 'BJRFC'
EXPORTING
FILE = 'D:\tmp\test_ster3.txt'
WRITE = 'X'
*FILETYPE = ''
TABLES
FILEDATA = itab
exceptions
system_failure = 1 message dg_ermsg
communication_failure = 2 message dg_ermsg.
Can anybody suggest me how to fetch the requireoutput.Dear alex,
With this output the the following cases appearing in system,
1) rfc connection is getting failed due to excess length, no file generated
2)Some times o/p file getting generated with 0KB, i mean there is no data in the output.
Once agian i am putting the code here
Kindl suggest
*& Report Z_ZIC_ZI001
REPORT Z_ZIC_ZI001 line-SIZE 250.
Data : lv_string type string,
dg_ermsg TYPE char120.
Types : begin of ty_itab,
l_string(2050) type c,
l_string type string,
end of ty_itab.
data : itab type ty_itab occurs 0 with HEADER LINE.
lv_string = 'I am having following scenario in which i am sending the file to a destination system through RFC connection which is having more than 255 characters, But it is not allowing to enter more than 255 XXXXXXXXXXXXXXFFAFFAGAGAGAGAGG'.
CONCATENATE lv_string lv_string lv_string into lv_string.
CONDENSE lv_string.
*while strlen( lv_string ) > 255.
itab-l_string = lv_string+0(255).
append itab.
lv_string = lv_string+255.
*endwhile.
itab-l_string = lv_string.
append itab.
call function 'RFC_REMOTE_FILE'
DESTINATION 'BJRFC'
EXPORTING
FILE = 'D:\tmp\test_ster5.txt'
WRITE = 'X'
*FILETYPE = ''
TABLES
FILEDATA = itab
exceptions
system_failure = 1 message dg_ermsg
communication_failure = 2 message dg_ermsg.
if sy-subrc = 0.
write : 'success'.
else .
write : dg_ermsg.
endif. -
I am using PL_SQL with Oracle8i and OAS 4.0 web server.I want to
use owa_text.vc_arr to pass the inputs in serval text areas in the form on a web application.
If the input string length is less than 4000 characters, everything works fine.However when the strings are longer than 4000 characters but less than the max length 32767 characters, I got this error message:
OWS-05101: Execution failed due to Oracle error 2005
ORA-02005: implicit (-1) length not valid for this bind or define datatype.
In the Oracle Application Server 4.0 documment, it says
about owa_text.vc_arr :Type vc_arr is table of varchar2(32767)
index by binary_integer. It means that owa_text.vc_arr can handle multiple strings and each string can have up to 32767 single byte characters, is it right?
Owa_text.vc_arr is supposed to handle the string with more
than 4000 characters, is it true? Could anyone tell me why? Any
help will be greatly appreciated!!!
Thanks very much.
Helena Wang
Here is the pl_sql procedure to create my form on the web:
PROCEDURE myform
IS
BEGIN
htp.p('
<form action="'||service_path||'helena_test.saveform3"
method=post>
<input type=hidden name=tdescription value="X">
Input1: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
Input2: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
<input type=submit name=WSave value="Save">
</form>
END;
/***** here is the pl_sql procedure which I use to save the
form***/
procedure saveform3(tdescription in owa_text.vc_arr,
WSave in varchar2 default 'No')
is
len pls_integer;
begin
for i in 2..tdescription.count loop
len := length(tdescription(i));
htp.p(len);
htp.p(tdescription(i));
end loop;
end;The maximum size of a VARCHAR2 field in Oracle 8i is 4000 bytes.
you'll ned to use a LOB type (or LONG if you prefer the old way) -
Requirement is to print more than 60 characters after ALV grid display
Hi Consultants,
Using 'REUSE_ALV_COMMENTARY_WRITE' , i have tried to display some text at end of page event, but ot is only displaying upto 60 characters, because SLIS is suporting oly 60 characters.
But my requirement is to print the line of text , i am getting the text through container.
suggest me the way to do.
Thanks in advance.
MadhanThere are a few possible ways ... here's one....
First of all, you cannot load more than 60 characters into a field at a time. So, if you create two info objects, one as a key and the other as text, you can load multiple lines.
For example, in Quality Notifications, there are Memo fields that can go on ... and on ... and on. What I do in these cases is add two characteristics to my data target called ZCOUNT and ZMEMO. ZCOUNT is the number of 60 character segments I will need to grab and ZMEMO is filled with each 60 character length of the memo field.
If you receive a 300 character field, then you break it up into 5 ZCOUNT's and create 4 additional, identical records with the Memo Field changed for each 60 characters of length.
It gets a bit trickier if you have multiple 60+ character lengths, however, if you know you will always have 75 characters, then it's easier to use two info objects ... 60 + 15 characters each.
Good Luck,
Brian -
Writing to db more than 4000 characters
Hi, i want to store a text with more than 4000 characters in an oracle database.
i can't use varchar2(4000)
what should i use?
blob?
clob?there is some kind of a problem here
a want to store a text with 29212 characters, but there is an error message saying, data size is greater than the maximum value of this type...
this is an sqlexception -
In the Oracel Web Application Server 4.0 documment, it says
about owa_text.vc_arr :Type vc_arr is table of varchar2(32767)
index by binary_integer.
I amusing PL_SQL with Oracle8i and OWA4.0 web server.I want to
use owa_text.vc_arr to pass the multple line texts in my form.
If the text length is less than 4000 characters, everything works
fine.However when the texts are longer than 4000 characters but
less than the max length 32767 characters, I got this error
message:
OWS-05101: Execution failed due to Oracle error 2005
ORA-02005: implicit (-1) length not valid for this bind or define
datatype.
Owa_text.vc_arr is supposed to handle the string with more
than 4000 characters, is it true? Could anyone tell me why? Any
help will be greatly appreciated!!!
Thanks very much.
Helena Wang
Here is the pl_sql procedure to create my form:
PROCEDURE myform
IS
BEGIN
htp.p('
<form action="'||service_path||'helena_test.saveform3"
method=post>
<input type=hidden name=tdescription value="X">
Input1: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
Input2: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
<input type=submit name=WSave value="Save">
</form>
END;
/***** here is the pl_sql procedure which I use to save the
form***/
procedure saveform3(tdescription in owa_text.vc_arr,
WSave in varchar2 default 'No')
is
len pls_integer;
begin
for i in 2..tdescription.count loop
len := length(tdescription(i));
htp.p(len);
htp.p(tdescription(i));
end loop;
end;Helena, I think you might get a better response either from the SQL-PL/SQL forum, or perhaps the Portal Applications forum - both of these tend to have folks very familiar with PL/SQL and the OWA packages.
This forum is on Web services based on SOAP, WSDL and UDDI. These can be PL/SQL based but typically don't use the mod_psql or OWA web solution.
As a pointer, I suspect you may already be familiar with, but just in case, you can always take a look at chapter 3 of the OAS documentation, "Developer's Guide: PL/SQL and ODBC Applications" where they go through a number of examples using parameters. See:
http://technet.oracle.com/doc/appsrvr4082/guides/plsql.pdf
Hope this or folks from the other list can help.
Mike.
Maybe you are looking for
-
Gif and JPG save for web file sizes in CS2 and CS3
Gif 64 dittered default CS2=2.63KB CS3=4.83KB JPG CS2Low=1.42KB CS3=4.03KB JPG CS2Medium=1.90KB CS3=4.51KB JPG CS2High=3.38KB CS3=5.99KB Why? Is there any solution besides keep using CS2 for web? Thank's in advance. regards Fernando Bergamaschi
-
Can I restrict itunes to just one user account in windows 7
Hi there, I have just bought an iPhone and was wondering if it possible to set up two user accounts on my PC that are entirely separate from one another (OS Windows 7). The reason being is that I want to be able to use my iphone with iTunes on one ac
-
How to create an element with an ID attribute ?
Hi, first i need to say i searched the web for ~one week now, and couldn't find any good solution. Lastly i searched into this forum and, unfortunaly, i couldn't find any good answers to the problem. Here are the reference : http://forum.java.sun.com
-
I just recently sold my Mac Pro and bought a new Macbook Pro with Retina Display and I love it. Here is my plan, I'm sure someone can help: I had all my media on my Mac Pro, which I would stream over my network to my Apple TV seemlessly. With my new
-
Please help me with installation...
I want to create WebServices with Java, so I've read to install JBOSS, JWSDP and AXIS. At my pc a Tomcat 5.x-Server was running, before. So I've deinstalled this one, in order to install JBOSS, JWSDP (also including Tomcat) and AXIS. First I've insta