More than 1h with high quality!possible?
hey my dear creativity-friends,this my first post here and it's about the sweet iDVD.
is it possible to have more than one hour high quality DVD (burned by iDVD),HOW!?
i'v already done tow DVD projects with iMovie and iDVD,the first one was about 40 min , the results was outstanding,sharp and colorful
the other project was about 90 min the results was very pixely,blur and has alot of saml dots when the screen show dark pictures.
i used the same Cam on both projects and the same Mac on the same iLife06 and my PB G4 running the holy Tiger 10.4.6.
thank you guys
Ali
powerook 17 Mac OS X (10.4.6)
If your PowerBook has a DL SuperDrive, you could encode a disk image as DL and burn that to a SL DVD-R. I did that and noticed a positive difference.
http://discussions.apple.com/thread.jspa?messageID=2339008�
G4 DP 1.25 GHz 2GB RAM 4 Drives 770GB Mac OS X (10.4.6) 2 SuperDrives (SL 8X & DL 16X)
Similar Messages
-
please suggest tools for acquiring high speed 8 analog channel data.
can my 600MHz P-3, 256MB Ram handle a data acquisition of more than 1kHz with waveform chart support?Arun,
I have performed data acquisition on a computer with lower specs than the one you described, at rates greater than 1 kHz. I don't quite understand the "waveform chart support" portion of your question, but if you are asking if it is possible to plot the acquired data on a Waveform Chart in LabVIEW, this should not be a problem.
If you have more specific questions, let me know.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman -
How to call the same query more than once with different selection criteria
Hi,
Please do anybody know how to solve this issue? I need to call one query with the fixed structure more than once with different selection criteria. For example. I have following data
Sales organization XX
Income 2008 Income 2009
Customer A 10 20
Customer B 30 0
Sales organization YY
Income 2008 Income 2009
Customer A 20 5
Customer B 50 10
Now, I need this. At the selection screen of query, user fill variable charakteristic "Sales organization" with interval XX - YY, than I need to generate two separate results per sales organization, one for Sales Organization XX and the second for SO YYwhich will be displayed each on separate page, where result for SO YY will be dispayed under result for SO YY. Are there some options how to do it for example in Report Designer or WAD or with programming? In Report Designer is possible to use one query more than once, but I dont know how to force each query in RD to display result only for one Sales Organization, which will be defined in selection screen.
Thank you very much
J.Hello,
thanks to all for cooperation. Finally we solved this issue with the following way..
User fill appropriate SO on the selection screen, which is defined as range. This will resulte, that selected SO are listed in report below each othe (standard behavior). Required solution we achieved with the Report Designer, we set page break under each Result row of RD. This caused, that report is divided into required part per SO, which are stated each on separate page.
J. -
I have a Photography Studio and I am trying to create client slideshows that display in very high quality. If I view the slideshow as created on iPhoto, the output is fantastic. If I burn a disc with iDVD (even on "Best Quality") the images as viewed from the DVD are not great. They become a little jaggy and some color shifting is evident. Not horrible, just not professional looking. My files are high quality .psd files. I have tried the process with high quality .jpg files, too.
Is the answer a PRO level DVD compression product? Voodoo????
I am at my wits end, but it was a short trip to get there.
Thanks for any and all help,
LouieHi,
I understand you want to create a DVD, right? Before you know how to get the best quality, you must choose what software to use . You can build slideshows using just DVD Studio Pro (DVDSP Folrum) and/or in a video timeline with FinalCutPro (FCP Forum).
Each soft need a different approach ! You'll find a lot of posts with useful information in that forums and you can post your own when you decide what tool use for your project.
If you want to build simple slideshows with just a transition or no transition at all, where the people can choose next prev and so picture, you can use DVDSP.
If you want a more sofisticated presentation where you can control completly adnvanced trasitions and zoom/pan effects, you need to create it in a video application like FCP.
You posted this question in Compressor forum, what is a tool for transcoding your video footage to, i.e. MPEG2 files to include in DVDSP.
About quality, think that Standard Definition DVDs have a resolution of 720x480 pixels (NTSC) what probably is absolutly low resolution compared with your original pictures, but doesn't mean your pictures will look bad. Any comercial movie DVD you watch has that resolution ! The advantage is that every DVD player (computer and stan alone ones) will be able to play it.
When you mention the iPhoto slideshow, I think you mean a slideshow you played directly from your computer what is a completly different approach that DVD.
I just want to give a start point. -
Please, I am in a very big problem
I designed the project by Adobe director
And you test the software on the computers on Windows and works with high quality
When I tested the project on Apple Macintosh operating system, Li appeared a number of problems and you dissolve a large part of them
But I have a problem too big
The project works on some devices and others show me messages mistakes and why chasm different operating system version
Apple's Macintosh and these messages
"biosegnatures" can't be opened becouse it 's from undefined developer "
others
shokwave player error
pleas what can i doWelcome to the Support Communities.
m.raslan wrote:
I tested the project on Apple Macintosh operating system
Click on the menu at top left of your screen, choose About This Mac and, in the panel that appears, note the Version no. in the form 10.n.n. Then update your product list so we can see what version of OS X you're running on the Mac — see this tutorial:
Update your product list
m.raslan wrote:
"biosegnatures" can't be opened becouse it 's from undefined developer "
This Apple doc may help:
OS X: About Gatekeeper
m.raslan wrote:
shokwave player error
Is Shockwave Player installed?...
http://www.adobe.com/shockwave/welcome/
...If not, get it here:
http://get.adobe.com/shockwave/ -
Permissions Error if Script is run more than once with out closing Diadem
I am in a REAL pickle here and need some HELP......
I get a permissions error message when I try and run my scripts more than once with out closing Diadem 2011.
Call scriptinclude ("D:\_Calterm_Configuration_Files\Technical_Information\DIAdem_Scripts\Importing Multiple Data Logs_CaltermIII_Local.VBS")
Error is around this portion of script:
'******* GetFilePaths() *** *** NEW Function ***
Function GetFilePaths(DefaultDir, ExtFilter, MultipleDir, Msg)
Dim i, k, f, fso, iMax, FileListPath, StartIdx, CurrFiles, FileList
' Promt the User to select the ASCII files to load with a File Dialog
FileListPath = AutoActPath & "FileDlgList.asc"
Set fso = CreateObject("Scripting.FileSystemObject")
StartIdx = 0
ReDim FileList(0)
Do ' Until (DlgState = "IDCancel")
Call FileNameGet("ANY", "FileRead", DefaultDir, ExtFilter, FileListPath, 1, Msg)
IF (DlgState = "IDCancel") THEN Exit Do
' Read in the saved list of file(s) selected in the File Dialog into FileList()
**** This next line is where the ERROR happens *******
Set f = fso.OpenTextFile(FileListPath, 1, True) ' f.ReadAll returns file contents
CurrFiles = Split(vbCRLF & f.ReadAll, vbCRLF) ' turn file lines into an array
f.Close ' close the file
iMax = UBound(CurrFiles)
IF iMax > 0 AND Trim(CurrFiles(iMax)) = "" THEN
iMax = iMax - 1
ReDim Preserve CurrFiles(iMax)
END IF
Call BubbleSort(CurrFiles) ' sort the array of file names alphabetically
' Append current file dialog selection(s) to any previous file dialog selection(s)
IF iMax < 1 THEN iMax = 0
ReDim Preserve FileList(k + iMax)
FOR i = 1 TO iMax
k = k + 1
FileList(k) = CurrFiles(i)
NEXT ' i
IF MultipleDir <> TRUE THEN Exit Do ' forces only 1 dialog, good if all desired files are in the same folder
Loop ' Until (DlgState = "IDCancel")
GetFilePaths = FileList
End Function ' GetFilePaths()
266 6:18:34 PM Error:
Error in <NoName(1).VBS> (Line: 8, Column: 1):
Error in <Importing Multiple Data Logs_CaltermIII_Local.VBS> (Line: 140, Column: 5):
Permission denied
I can send the script and file I am loading if that would help.
Solved!
Go to Solution.Jcheese,
I understood that if you call this script within DIAdem you don't get any error, however, when you run that script from another source (with DIAdem opened) for the second time you get the error, right?
If this is the case, I think it might be that the file haven't close correctly in the script. Could you upload the script file?
Carmen C. -
Dear All,
I'm using Cisco ASA 5505 Firewall and I want the email alert from my Firewall if the CPU increase more than 70 %. Is it possible, Please help me.
Thanks
VijayHi Vijay,
If can be done but you need any network management software. I personally dont think you can ask your ask to send mails. ASA can trigger alert to a SNMP configured server which will intern send mail to you
HTH, -
I am considering buying Acrobat 11 Prio on a monthly subscription but I would like to use it on more than one machine is this possible?
You are allowed to have two working installations so if you want to have it on two machines you can. If you want it on more than that then you need to manage which ones are working at any given time such that only two are usable.
-
Ventrilo Mic Hiss with high quality Mic and X-Fi Titanium PCI-E
?Ventrilo Mic Hiss with high quality Mic and X-Fi Titanium PCI-E? I have <a rel="nofollow" href="http://www.astrogaming.com/products/detail/4/A40-Headset/]this headset.[/url]? It works perfectly on other setups and is a very high quality headset.
Recently, I installed the X-fi Titanium PCI-E card. Everything sounds great and my mic works well in other programs and games, however, when talkin in ventrilo there is?a noticeable high pitch?microphone hiss. The hiss goes away when I put my fist around the mic, but I can't exactly talk like that. Plus putting foam around the mic doesn't make it go away.
The headset works fine on other setups so it is not at fault. It's almost like there is a mic boost on, but there doesn't seem to be a mic boost feature in the Creative Console.
Windows 7 Home Premium 64-Bit
Intel Core I7 920 @ 3.4ghz
6GB RAM
4870x2 GPU
Asus P6T Deluxe MOBO
Creative Sound Blast X-Fi Titanium PCI-E
Any ideas. I've tried everything. I used to exact same ventrilo settings on another computer and have had no problems, so it is not ventrilo and is not the mic. It has to be something wrong with the sound card.
ThanksTurned my T.V. off and the hiss went away.
Must have been some sort of interference. -
What Is The Best Way To Connect Ipod To Stereo Reciever With High Quality?
I recently purchased an 80 gig and am a newbie. I ripped all my music at around 280kbps to retain good audio quality when playing in my car and home theatre system. There are tons of accesories out there (docks, jacks, etc) which is the highest quality to connect my Yamaha receiver. I would think a connection to the bottom of my ipod would be of a higher quality rather than using the headphone jack. Any suggestions would be great. I was thinking about using the monster itv link but mostly for audio. thanks
OK - So now that you have all completely ignored the original question - in hopes of proving your manly-hood....
Does anyone have an answer to the original question....
"What is the best way to connect to a high end home stereo to retain the best sound?"
For sure any connection going through the headphone jack will be a big step back - enough so that you would easily hear a sound quality loss in doing so.
For the few of you who would like to argue/bicker/rant on the nominal sound quality loss....keep on doing so, but for those who actually have some respectable advice we would love to hear it.
For the record, I tend to hear just outside the normal human auditory range...
To help myself put it to rest already... a few years back I decided to conduct my own little listening test.
I took 6 different common ripping modalities (from lossless - to - 128kbps in both MP3 & AAC.... then transfered all of them in order to a blank. Used the same song for each - the song chosen opened with a few clean crisp bars of high freq. music, followed by an instant explosion/drop into a tight & low bassline.
The final cutoff that was achieved before I was unable to detect an audible difference was 198 VBR AAC. Having convinced myself that there was the ever sooooooo slight difference b/t 198 & 256, I went with my current ripping status of 256.... Just incase my audible range should become finally honed with age (yeah, like that is really going to happen) !
This test was run over a Yamaha DSP receiver, running at a constant 110w per channel (w/a max of 220w). The speaker setup was a full surround set of Klipsch Reference Series..... each speaker housing 2 x 6.5 woofer (each housing 2 x 1" Titanium tweeters) And sitting along side the 5 surrounds was/is a 150w continuous 12in. Subwoofer.
Now I am hardly stating that I have hearing as good as some of you extremely technically profound music enthusiasts out there, but for the majority of people making comments about sound quality, and lack there of - when played over a $120/40w Audiovox radio.... I'm sorry, but I would have to side on that of......"Hogwash, that you can hear a difference!"
So.... if possible would someone please offer some advice on a dock or cable connection that will allow us to enjoy the music we ripped at whatever
so-called range we did!
For those interested in seeing who could hit the further bullseye with their eyes closed, You win!!! Now can you help us?
MBP Mac OS X (10.4.9) -
Adding more than one movie to iDVD - possible or not?
I assumed that you would be able to drop more than one imovie into a iDVD project and that it would add them as different menu items but it won't do it. Am I trying to do what is not possible? Any help is appreciated cheers!
Hi Cheeba
You got a very good link from Sue but it is fairly easy to describe.
A. Make Your movies in iMovie. (You can make them in one session but
it is easier to make each as an individual project)
B. Close iMovie
C. Locate Your moviprojects. Folders for iMovie 1-4 and an icon for v.5
(if icon: Ctrl-click on it and select show package)
in this there is a folder Share movie and in this a folder DVD. Here You
will find a QT.mov file with Your project name. Take this and drop it into
an open iDVD theme window (just inside the edge of this window).
repeat for the other movies.
OK that's all there is to it. You can try dropping the project folder/icon
instead of open it - it is supposed to work.
Yours Bengt W -
Ipod nano on more than 1 pc, is it possible?
Can anyone tell me if it is possible to use my ipod on my home pc and the one at work?
Yes it is, and this explains how.
Using iPod with more than one computer. -
Tracks cutting short on iPod after replacing with higher quality files?
I've been replacing old mp3 by deleting them from the hd then "re-finding" the newer higher quality versions in iTunes.
Problem is all these new files always cut short in my iPod, it's been driving me mad, I thought the solution would be to erase the pod completely then replace all the files, I did this (twice) and it still happens, I even filled my pod with completely different mp3s just so I knew the files were definitely getting wiped but still the tracks I replaced cut short when I put them back on the pod.
I really hope the only solution isn't to delete the files from iTunes then re-import them, I've been trying to avoid this as my library is a few years old now with a bunch of meta-data (play counts, ratings etc) that will be lost if I do this, there must be some other way, seems a bit silly, I'd really like to know why it's happening.
This only happens on my vid pod not my shuffle btw.
any suggestions?Ok thanks, I downloaded vbrfix but I'm not quite sure how it works (though I replaced the line of code for Mac as outlined) is there something I have to do to get it operational?
It looks like it's a problem with the iTunes metadata fooling the iPod into thinking the vbr file should end earlier then it does, maybe because cbr data was there originally and hasn't been replaced with vbr data, though it's strange this only manifests itself on the vid pod.
Would I really need to re-rip my cds? problem is I wanted to use the LAME encoder which can't be done very satisfactorily from with iTunes, it looks like maybe this vbrfix could just alter the metadata in the files themselves to make them more iPod friendly? -
I paid for this service to fix my glass on my phone and now the entire LCD display is not working and after my repair the home button stopped working and I went back and they told me it was like that before the repair which it wasn't and they are telling me I need to pay 300 plus for a replacement phone that's refurbished now I don't understand apples support is suppose to be the best in the business and I have been more then ripped of the service I got damaged my phone more than it was before I would like to know where I can go to talk to someone who will help me not tell me it's my fault this is outrageous!!!
Take the issue up with whomever replaced the device, whether that is Apple or another company.
There is nothing that we, your fellow users, in these user to user support forums can do for you. -
More than 1 variable in query possible?
hi friends,
how are you, can i use more than 1 variable in 1 query, if possible , can u give me 1 scenerio ple?Sunil,
Do you mean more than one variable per characteristic? If so I'm afraid not, you will get a Complex Selection message.
Hope this may help,
Regards
Gill
Maybe you are looking for
-
How can I use an exsiting Apple ID without a credit card?
Hi, I'm trying to use my already made Apple ID with iTunes, but I don't want to use a credit card. I know that you can make a free account in the Apps Store, but every time I type in my email address and password then click Sign in, a message display
-
Macbook Pro shuts off after few seconds of gray screen
Help - I came home to discover my power cord had died and my laptop turned off due to no power. I used a friend's power cord to turn it on later that night and send some emails. I bought a new power cord the next day, plugged in, and turned the lapt
-
Acrobat Pro 7.0 Crashes while adding page links
My client has supplied a 238 page Acrobat document. They would like me to add page links to the Table of Contents page for each chapter. When I try to set the page links Acrobat shuts down for not apparent reason. I've tried on my MacBook Pro running
-
Power view not working using remote sql
Hi Our Sharepoint 2013 has all it's content databases installed on a sql server 2008 R2 And our BI guys would like to use power view with the data on their SQL 2012 SP1. How should I proceed with the setup? At the moment I can't find any powerview in
-
Why won't iPhone open PDF's after updating to IOS8.1?
There is nothing I regret more than updating my iPhone 4 to the new IOS. My phone wasn't updating apps, so I did the iOS update. Now many things are not working, including not opening any PDF files when in Safarai. It keeps asking "open" and "open in