More than 3 things using the router, xbox

I have a computer hooked up to the router, along with 3 xbox's all wireless but it usually makes the connection fail when I turn on the last xbox. Is there a setting or a fix for this?

Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2)   On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
   ip address :- 192.168.1.20
   subnet mask :- 255.255.255.0
   default gateway :- 192.168.1.1
Please assign the dns address on the xbox
  primary dns :- 4.2.2.2
  secondary dns :- 192.168.1.1
6) Please try to test your xbox live...& you will be able to play the games wirlessly.

Similar Messages

  • Is it possible to install Lightroom 4.1 on more than one computer using the same product code?

    is it possible to install Lightroom 4.1 on more than one computer using the same product code?

    Yes, your license key is cross platform PC & or Mac you are allowed to have two current installations with one in use at any point in time. You can uninstall / install as many times as is necessary so long as you adhere to the limits.

  • Execute more than one thing at the same time.

    Hey why every time i want to execute more than one thing(create tables) at the same time
    it say "ORA-00911: invalid character" , i dont wanna execute one thing at a time. check the pic please
    http://img370.imageshack.us/img370/5120/oraclesw5.jpg
    but in my school i use something called isqlplus and i can execute all the things i want at the same time with-out any error.
    im using right-know
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
    PL/SQL Release 10.2.0.1.0 - Production
    CORE 10.2.0.1.0 Production
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production

    1) Unless you are using something like DBMS_JOB, SQL*Plus, iSQL*Plus, the Oracle XE web-based front-end, or any other application is going to execute one SQL statement at a time.
    2) There is a dedicated XE forum-- the folks over there might know how to run a script using this particular front-end.
    3) Assuming the XE database is on your local system, you should be able to log in via SQL*Plus and use that utility to run your scripts.
    Justin

  • Editing more than 4 clips using the multi-cam function. cs5.5

    How can I edit more than 4 clips at a time using the multi-cam function in 5.5?

    Ok, here's what I have so far...I managed to split up the video and edited both in the multi-camera view. Now I want to join those together so that I can use the multi-camera view to edit them together. Is there a way to do that? I tried nesting them both and laying them on the same timeline to use the multi-camera function, but now, I only get one view again. Is there something I'm doing wrong? Thanks for your help so far also. This is very interesting!

  • SAPCL Having more than one DB2 use the same trace directory.

    Hello,
    Looking at the DBACOCKPIT SAP Collector settings panel, we have all of the DB2 subsystems that run in a given LPAR use the same trace directory.  (HFS path of trace directory.)
    In our case, that directory is /usr/sap/saposcol/traces.  This means that we have trace files called db2cl* from all of our alert routers running on an LPAR in the same directory.  It is a little confusing, but we can handle it.  The question I have is that there is a cmds.alr file in that same directory.  The contents of that file seem to change occasionally.  At times throughout the day, the file seems to be contain information related to the five alert routers using that trace directory.  Is it OK for the contents of this file to change?
    Another question I have is related to the sapcl file that is in this directory.  The timestamp on this file seems to change periodically.  Sometimes the file size changes.  Note 958252, the SAPCL FAQ says "The trace directory is required to save errors or trace files and to start the alert router. To start the alert router, the system loads the executable SAPCL from the database, saves it temporarily in the trace directory and starts it in USS."
    With 5 alert routers, sharing the same trace directory, you could end up with 5 sapcl executables that get changed around based on what a particular alert router needs.
    Would it be better to point each alert router to a different trace directory?
    Thanks,
    Ron Foster

    Hello,
    There are two configuration parameters in transaction DBACOCKPIT -> u201CSAP Collector Settingsu201D to determine the SAPCL directories.
    HFS path of collector:
    This is the directory, where the files u201CDBRM.db2cldbu201D and u201Csapdb2clu201D are located. The two files are used during installation of SAPCL and u201Ccopiedu201D into two targets:
    A) Linked into DB2 Load library to be used as the stored procedure SAPCL.
    B) Stored into a database table to be used as Alert Router.
    This directory is accessed during installation only. Not during runtime.
    HFS path of trace directory:
    This is the directory, where trace files are stored of the stored procedure SAPCL and the Alert Router. In addition, this is used during startup of the Alert Router. Startup of the Alert Router is done by the following steps:
    1. Unload the Alert Router executable out of the database table into the file u201Csapclu201D.
    2. Creating the Alert Router parameter file u201Ccmds.alru201D. E.g. it contains the SSID.
    3. The executable sapcl is started and the name of the Alert Router parameter file is used as the input parameter of sapcl to determine the behavior. E g.  /u/sapr3/s12run/trace/sapcl /u/sapr3/s12run/trace/cmds.alr
    To keep the input parameters files separate for each SSID, it is recommended to have a trace directory for each SSID. It is also recommended to have a trace directory for each DB2 member of a data sharing group. However, this is just a recommendation. Every time, an Alert Router is stared, the files u201Csapclu201D and u201Ccmds.alru201D are recreated and overwrite the existing files. After startup of the Alert Router, the two files are no more used.
    In the case, where you are using different patch levels or versions of SAPCL and you are using the same trace directory for all SSIDs, it is very likely, that you see different sizes of the file u201Csapclu201D. This is because different patch levels or versions of SAPCL have different sizes and you always see the file size of the most recent stared Alert Router.
    In case, that two Alert Routers are stared at the exactly same time, it could end up in problems.
    Here is an example of the contents of cmds.alr of a two way data sharing group with the SSIDs SGC1 and SGC2 with a shred directory /u/sapr3/jotrun:
    ssid=SGC1 sqlid=SAPJOT planname=CSAPCL FKTID=13 ACE=0 DBTRACE=0 TRACE=0 TRCDIR=/u/sapr3/jotrun/traceSGC1 GUID=4D0685A211780174E10080000A11C971
    ssid=SGC2 sqlid=SAPJOT planname=CSAPCL FKTID=13 ACE=0 DBTRACE=0 TRACE=0 TRCDIR=/u/sapr3/jotrun/traceSCG2 GUID=4D0685C411780174E10080000A11C971
    You can see, that almost all parameters are the same, except u201Cssidu201D and u201CTRCDIRu201D. TRCDIR come from the SAP Collector Settings parameter u201CHFS path of trace directoryu201D. Please note that there is not slash between u201Ctraceu201D and u201CSGCu201D. The directory name is u201CtraceSGC1u201D and u201CtraceSGC2u201D.
    Regards
        Dirk
    Dirk Nakott, IBM, DBACOCKPIT development

  • Can more than one MAC use the same time capsule??

    My husband and I both have 27" imacs.  Since he just had a hard drive failure, I'm worried about my machine, and we'd both like to start backing our computers up.  Can we both use the same hardware to do this?

    Just make sure you have TC big enough to backup both macs! the final storage will be bigger than the disk space sum of your both macs as there will be incremental backups and snapshots in time going back!
    Otherwise your TM app will scream bloody murder that you are runnign out of space  as mine does :-)

  • How to create more than one VIP use the same IP address and different port(e.g. 80 and 443)

    Hi,
    I use SCVMM LB Provider deploy network. I want to create 2 VIP use the same virtual IP but use the different port.
    for example:   VIP address 1.1.1.123   use port 80 for HTTP   and port 443 for HTTPS
    However,
    the following problems encountered, when I create the second VIP.
    PS C:\Windows\system32> New-SCLoadBalancerVIP -Name "vip11" -LoadBalancer $LB -IPAddress "1.1.1.123" -LoadBalancerVIPTemplate $VIPTemplate1 -LoadBalancerProtocol $Protocol1 -LoadBalancerHealthMonitor $HM1
    New-SCLoadBalancerVIP : A virtual IP (VIP) address with the specified name (vip11) or
    address (1.1.1.123) already exists on the load balancer (xxx). (Error ID: 13691)
    Specify a different name or IP address and try again.
    To restart the job, run the following command:
    PS> Restart-Job -Job (Get-VMMServer localhost | Get-Job | where { $_.ID -eq
    "{b41a77eb-ae0b-490a-8948-662a529b1d8c}"})
    At line:1 char:1
    + New-SCLoadBalancerVIP -Name "vip11" -LoadBalancer $LB -IPAddress "1.1.1.123" -Lo ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : ReadError: (:) [New-SCLoadBalancerVIP], CarmineException
        + FullyQualifiedErrorId : 13691,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.Ne
       wSCLoadBalancerVIPCmdlet
    PS C:\Windows\system32>
    any suggestions ?
    Thank you in advance !

    I really don't know DDE very well. It is usually recommended that you switch to using ActiveX. You may not be correctly configuring the netDDE server. There is an example in the reource library that shows how to do this. You may also want to look at the DDE advise examples that came with LabVIEW 5.1 and earlier.

  • Actionscript 3 Class Not Running More Than Once After Using The GoToAndStop function

    I'm having a strange issue, and I am sure it's due to my lack of knowledge about how classes fully work in Adobe AIR (Flash CC). I've created a login button that is connected to a function, and based on a set of conditions it will take you to a different frame with the GoToAndStop function. I've created a logout button that is suppose to take you "back" to the login frame (that has the login button) if you click the logout button using the GoToAndStop function. Up to this point, everything works until I try to click the Login button again, it does not do anything. It's like it does not even try to execute my class file anymore.
    Does the class file only run at startup and never runs again, and if so, how can I create a section of code that is constantly monitoring what the user is doing no matter what frame you are on and no matter if I use the GoToAndStop function or not?
    Thanks

    Based on your qyestion, I think I was wrong with my second guess.
    When I want to create a button, what I do is draw a bitmap that looks like a button and then use a mouse event listener that looks for any part of the stage that is clicked.  You would use the same code for touch as well.  As3 will return the x.y. coordinate of the area that was clicked or touched.  When the xy coordinate is known, if it corrseponds to the area where the button is, I code the appropriate response.  Hence, I only use one event listener for all my buttons, as long as thet involve simple clicks or taps of the screen.
    Good luck, Justin

  • Can more than one CHM use the same resources?

    OK, here's the challenge:
    I have a large RoboHTML project with 433 small video clips
    (swf flash files). This project is translated into 10 other
    languages. What I would like to be able to do is to have the
    translated .chm files share the video clips instead of distributing
    11 copies (433 x 11 = 4763 files). Is there any way that anyone
    knows that all of the files can access one set of video clips, and
    display, and play them?

    Hi Margaret
    I suppose exactly how you might accomplish this would largely
    depend on exactly how you are managing to insert the .SWF content.
    Just in case it will help, I'll outline something I tried.
    Within an existing RoboHelp HTML project, I added a new page.
    I then inserted a .SWF onto the page by clicking Insert >
    Multimedia... > Browsing for the desired .SWF, clicking Open and
    finally OK.
    At this point, the .SWF has been inserted into the topic.
    Unfortunately, this process ALSO copied the .SWF to the project
    location.
    So I now visit TrueCode for the topic, and amend the .SWF
    filename reference to include an absolute path to the .SWF.
    I save the TrueCode.
    I then visit the folder where the project is and delete the
    .SWF. This step prevents it from being included in the resulting
    .CHM once it has been compiled.
    I then compiled and tested. The .SWF loads right up into the
    topic!
    Will this help? Rick

  • How to backup more than one database using powershell

    I am Trying to backup more than one database using the following script but no luck. I want user to type on command line the database they want to backup, e.g all databases that have "test" at the front like test.inventory, test.sales so i want
    user to type test.* and it backs up all databases related to test. Here is the script
        #$date = Get-Date -Format yyyyMMddHHmmss
        #$dbname = 'test.inventory'
        $dbToBackup = "test.inventory"
        cls
        [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SMO") | Out-Null
        [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SmoExtended") | 
        Out-Null
        [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.ConnectionInfo") 
        | Out-Null
        [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SmoEnum") | Out-
        Null
        Add-Type -AssemblyName "Microsoft.SqlServer.Smo, Version=10.0.0.0, Culture=neutral,   
        PublicKeyToken=89845dcd8080cc91"
        $server = New-Object Microsoft.SqlServer.Management.Smo.Server($env:ComputerName) 
        $server.Properties["BackupDirectory"].Value = "C:\_DBbackups"
        $server.Alter()
        $backupDirectory = $server.Settings.BackupDirectory
        #display default backup directory
        "Default Backup Directory: " + $backupDirectory
        $db = $server.Databases[$dbToBackup]
        $dbName = $db.Name
        $timestamp = Get-Date -format yyyyMMddHHmmss
        $smoBackup = New-Object ("Microsoft.SqlServer.Management.Smo.Backup")
        #BackupActionType specifies the type of backup.
        #Options are Database, Files, Log
        #This belongs in Microsoft.SqlServer.SmoExtended assembly
        $smoBackup.Action = "Database"
        $smoBackup.BackupSetDescription = "Full Backup of " + $dbName
        $smoBackup.BackupSetName = $dbName + " Backup"
        $smoBackup.Database = $dbName
        $smoBackup.MediaDescription = "Disk"
        $smoBackup.Devices.AddDevice($backupDirectory + "\" + $dbName + "_" + $timestamp +   
        ".bak", "File")
        $smoBackup.SqlBackup($server)
        #let's confirm, let's list list all backup files
        $directory = Get-ChildItem $backupDirectory
        $backupFilesList = $directory | where {$_.extension -eq ".bak"}
        $backupFilesList | Format-Table Name, LastWriteTime

    Or i am using this script which backs up everything except tempdb but dont know how to modify this so that it backs up up all test related databases
    Is there a way that i use test.*
    [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.SMO") | out-null
    $s = new-object ("Microsoft.SqlServer.Management.Smo.Server") $instance
    $bkdir = "C:\_DBbackups" #We define the folder path as a variable 
    $dbs = $s.Databases
    foreach ($db in $dbs) 
         if($db.Name -ne "tempdb") #We don't want to backup the tempdb database 
         $dbname = $db.Name
         $dt = get-date -format yyyyMMddHHmm #We use this to create a file name based on the timestamp
         $dbBackup = new-object ("Microsoft.SqlServer.Management.Smo.Backup")
         $dbBackup.Action = "Database"
         $dbBackup.Database = $dbname
         $dbBackup.Devices.AddDevice($bkdir + "\" + $dbname + "_db_" + $dt + ".bak", "File")
         $dbBackup.SqlBackup($s)

  • Syncing Issues when trying too sync more than one thing

    since the 8.0.2 update syncing has been real glitchy for me lately when i try too sync my iphone and ipod. for whatever reason, i cant sync more than one thing at the same time. for example if i have my iphone still plugged in, then plug in my ipod too update it, soon after the itunes would give me a unknown error then lock up. specifically this error. http://img407.imageshack.us/my.php?image=unknownituneserrorjq3.jpg
    sometimes it would say iphone, sometimes it would say ipod.. that error would just depend on which was plugged in first.
    its just weird, windows detects both drives fine. and if i have them in one at a time itunes will be able to read and sync that device. unless this is a direct problem with my computer which i dont think, i dunno. both devices work in any usb port. it just doesnt like them both being in at the same time.
    this happening with anyone else?

    See this support doc, iPod for Windows: Only works with one iPod at a time. The title pretty much says it all. If it's worked for you before then it's more likely by luck than design.
    tt2

  • Insert more than 4000 characters using sql plus

    I have a SQL script that creates a database. The problem is that some of the fields are longer than 4000 characters in the INSERT statement and Oracle doesn't seem to like it.
    The field is a clob and works fine in the application (i.e. I can insert more than 4000 characters using the app) - how do I achieve this in a SQL script?
    Any help is much appreciated.
    Cheers,
    Steve

    Hi,
    This pl/sql block works absolutely fine in SQL*Plus inserting > 4000 characters into clob column:
    declare
    l_str varchar2(8000);
    l_str1 varchar2(2400) := 'first part of the verly long string...';
    l_str2 varchar2(2400) := 'second part of the verly long string...';
    begin
    l_str := l_str1 || l_str2;
    insert into tmpl values (l_str);
    end;
    So, you'll have to replace inserts with pl/sql blocks in your script.
    Tested in Oracle 8.1.7.0.0
    Regards,
    Andrew Velitchko
    BrainBench MVP for Developer/2000
    http://www.brainbench.com

  • My husband has paired his phone using the remote app to the TV- I would like to do the same with my phone. Can we pair more than one phone to the tv using the remote app ?

    My husband has paired his phone using the remote app to the apple TV- I would like to do the same with my phone. Can we pair more than one phone to the tv using the remote app ?

    Yes I believe so. Try it and see you can always delete the Apple TV from a remote if it messes things up.
    But we have three remotes setup to do this. My iPhone and iPad and my wifes iPhone. She has a different iTunes logon but it seems to work fine

  • Using more than one camera at the same time..

    Hello every body..
    I have a problem with dealing with java media frame work and i want to solve the problem as fast as i can since it will delay my work..
    I hope that any one can hep me..
    I post this problem previous but i don't have agood answer i want to knew if this problem can be soved or not and if can be solved How???
    The problem:
    If any one use JMF Studio it is known that any one can captre any device connected such as ( camera , mic,...) using JMFStudio..
    I do the capturing very well but the problem i face it is HOW I CAN CONFIGURE MORE THAN ONE CAMERA AT THE JMF??
    If i connect 2-cameras from different types ( sony , web cam) then the jmf registary will register the 2-cameras with only one difinition is( vfw:Microsoft WDM Image Capture (Win32):0 ) so when i use the java code to access the 2-cameras then i found only one difinition for one camera and i can access only one camera!!!!!!!!!
    I don't know how i can solve this problem??
    please help me !!
    For reply or any information contact me at my e-mail
    [email protected]

    Please Help me .....!!!!
    If the Sun Community Forums don't Help me who will help me at my problem??????!!!!!
    Help Me!!1

  • Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes? Both my daughters have ipods, my wife has one

    Dear All
    Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes. My daughters have a different generation 'nano' each & my wife a 'shuffle'?
    Many thanks

    Click here for options.
    (69081)

Maybe you are looking for

  • Link between G/L Account and profit center

    Hello dear all, I have an issue in Intra-company process. I made 2 customer payment for 2 different company code: 1/ Company 1000: i have 2 line items posted (in G/L View) 2/ Company 2000: For the same Cash account and the same customer account used

  • What is the maximum level that a role can be resolved to?

    hi folks can anyone tell me what is the maximum level at which expand role works. for example if i have a role which is then having 3 roles, each role has 2-3 users. will expand role work in this scenario? Also plz tell me why expand role does not wo

  • Epson Artisan 725 scanner fails under Yosemite

    Thought I'd tested everything important before upgrading to Yosemite, but when I went to use the scanner on my Epson Artisan 725, the scan driver fails with error message "Scanner is warming up." It never gets beyond this point. Scanner works fine fr

  • Message type to ALE T880

    Hi All, I have a requirement to ALE the table T880 changes (Global Company Data (for KONS Ledger). Can anybody help me identify if there is any standard message type to handle this requirement. I tried creating a custom view and sending idocs. The da

  • Beginner-- is this a good set-up?

    Okay I say I'm a beginner but I've been at uni for three years studying film production and have played around with the Canon C300 A LOT but obviously there are major differences to the DSLRs... Anyways, I've decided to purchase a Canon 5D m3 and the