More than 8 colors for /usr/bin/emacs?

Hello -- i'm trying to customize my experience on Terminal, and the first problem is that I'm not getting enough colors in emacs...
M-x list-colors-display
indicates that I'm only getting 8 colors... Now maybe I could adjust those colors to be what I want, but what I'd really like is a full palette of 256 colors. How can I do this?
My settings are:
DISPLAY=/tmp/launch-cdshyE/:0
TERMPROGRAM=AppleTerminal
TERMPROGRAMVERSION=272
LANG=en_US.UTF-8
TERM=xterm-color
HOSTTYPE=intel-mac
VENDOR=apple
OSTYPE=darwin
MACHTYPE=x86_64
thanks!

You need a different terminal for that. The Mac OS X Terminal application support 8 colors.
iTerm <iTerm.sf.net> I think can handle 8 colors and 8 half tones of the same colors.
After that I think you need to look at installing a X11 xterm based terminal. But if you are going to use an X11 xterm, you might as well run an X11 based emacs. Or better yet, download a Mac'ified emacs that uses the Aqua GUI interface and get all the colors you want.
For X11 xterms, try <http://MacPorts.org> or <http://Fink.sf.net>. For GUI versions of emacs try searching <http://VersionTracker.com> or even Google.

Similar Messages

More than 8 colors for tags

I there,
can I change the colors from the tags? I like to choose more than these 8 colors.
Thank's for the answer!

Thanks!
Maybe in the next version. I would prefer that.

More than 5 colors for Kuler/Color Theme?

Hi,
Righ now the Kuler/Color Theme panel allows for up to 5 harmonized colors.
But what if I want to add another 5, 10, 15 or 20 harmonized colors to my theme? How would I do that?
I'm looking for a way to ensure that when I pick colors, that they're all harmonized with eachother and won't clash when I put them in my image in Photoshop. I think the 5 colors are standard, but what method do I use to add more? I think it might have something to do with dragging the color points in the kuler color wheel, but I'm not sure.
For example if I'm working on a colorful digital painting, sometimes I use a wide range of colors, but when I paint them down on the canvas they all seem to clash - I'm trying to find a way to either:
a) harmonize all colors in an image using a filter or something similar
or
b) find a way to pick colors that are pre-harmonized , perhaps from a swatch set that contains pre-harmoniozed colors. This is where I would use Kuler, but again it only allows for up to 5 colors. I need to find a way to add many more colors to a theme while keeping their colors synced with eachother. Hope this makes sense...
Any input would be great

Change the brightness, saturation, etc after you've selected your color in Photoshop or whatever. You can have as many color variations as you want:)

Has anyone used more than one event for one project?

Hi,
I have an opinion about Final Cut Pro X that hasn't changed since my first few days with it. I waited to see if I would get used to it. But, after a fair amount of time, I still am not comfortable with 'Events' and 'Projects'. The separation of the media and projects creates more problems than solutions with my workflow.
The purpose of it was to add flexibility for both the professionals and consumers using it, but my first impressions are still the same. The new Event and Project system adds complexity to organization and archiving. I wouldn't write this if it wasn't enough of a hindrance for me, that I encounter constantly. I think the new Final Cut Pro X is incredible, but this issue is definitely important to me.
Has anyone out there used more than 1 Event for 1 Project? Some of us create more than 1 Project for an Event, to make different version of a video, or for brainstorming, or to make a part 1 and part 2 of a video, but I've never had more than 1 Event for 1 Project. I don't need to use the media from multiple Events for the same Project. And I've never used it for a reason. I don't think someone will want to use their Hawaii vacation footage for a Denver vacation project, and a Florida vacation project. I think we should bring back the connection between Events and Projects in a meaningful way.
This is a throw back to the older days, but that's not always a bad thing. Let us keep our projects, or timelines, in the Events folder. Make an area above the JPG section, and PNG section, and MOV section, and call it the Projects section. Then we can easily find our Projects and add a new Project every time we need it, and organize our files quickly - without having to keep track of more windows. Final Cut Pro X is all about being more simplified than other video programs, and I think this goes right along with that idea.
Thanks,
- David

My original fear was that FCPX was just going to be iMovie Pro... It so is not!
People use the interface in different ways. I think that's what most of us like about it, it's flexibiity to accommodate different types of workflows. For me, I use the Events browser mostly like I'd be using the Finder. All the imported clips I use are referenced by the hard disks on which they reside. I know where to find them in the Event Browser and I know where to find them in the Finder. I use a lot of stock footage and therefore *reuse* a lot of stock footage from project to project. I'm not going to re-import duplicates into different events because I don't find that the least bit convenient and I do find it a terrible waste of precious HD real estate.
But that's me.
Some people like to load up everything they're going to use in a single project in a single event... I get that. You can command click your way through a bunch of clips, type E and everything is automatically arranged on your storyline in the order you selected the clips. That is *awesome*!! Instant storyline (/timeline.) Furthermore, for those that need to share projects, it's easier to bundle up the events and projects if they're all together (albeit in two different folders) on one disk (— at least they are always at the top level of the drive and easy to find.)
Keeping your Events media in a different location (satellite drives) and keeping your current project on your *fastest* drive is probably the fastest way to edit (particularly if your satellite drives are Firewire or Thunderbolt [peer-to-peer interfaces don't hog system resources].) There is little cross interference in disk accesses that way. So essentially, you can keep FCPX dealing with original clip data that doesn't need to be quite as fast, reading and writing to slower drives on your system, while letting it plow through the heavy work on your fastest access drive (usually your internal HD.)
By no means is FCPX "more simplified". It has a huge amount of power. It has all the best parts of Color, Soundtrack Pro and Motion built in. It allows you to explore *ideas* in real time rather than having to plan for them a week in advance [layout, round-tripping plans to Color, STP and/or Motion for titling or effects.] You can grab and move around elements anywhere on your "palette" with simple mouse moves and an occasional key press. The list goes on. Bottom line, it doesn't matter how you organize your events or your projects. It's all about the finished product. And for me, I can turn that around in about 1/5th the time (not claiming it's great — but I think better results in 20% of the time, on average, than it would have taken in Studio.) [Not a professional video editor -- I'm a graphic designer, and I develop Motion graphics for FCPX to make all "you guys" look better.]

Can I have more than one ID for my iPad

Can I use more than one ID for my iPad, iPhone and iPod.? I am using the same for all 3 now.
My wife have one iPod and can I share my apps with her.? And if...How?
We are using the same computor for all devices.
Thanks in advance....
Best regards.....Reidar45

The spell check goes with the keyboard layout being used. Just activate both English and French in Settings > General > Keyboard and then use the Globe key to switch between them.
(I think there is bug in Pages, however, so that this doesn't work for that -- you have to change the OS language).

Can i create more than one instance for single database?

HI
anybody can tell me how to create more than one instance for single database(without using RAC)?
thanks
Kalanidhi

Anandji,
I sometimes think differently. I also think like what this person is asking..(although I have installed and administering 5 different RAC databases)
The main doubt of mine is that we create multiple instances accessing the same storage area.
Anyway the controlfiles of all instances will have the same information except the instance_names and instance id's.
Hence I always think , why can't it be possible to to create another instance in the same system and point it to a controlfile which is copied from the other instance.
Why can't the same files be shared between the two instances in a same system ?
I know I am thinking a little bit confusing...
Anyway I need to test that also...
Mahesh.

Creating more than one account for a single user

I was wondering, if I creat more than one account for me (the only person that uses my powerbook) is that going overboard? I mean, lets say I am logged into the standard account and I want to learn more about the bash shell and using terminal which I am new to, if I **** something up will the whole system be toast or will only things in that account be messed up? Like could I then just log into my admin account and delete the other messed up one? Or no? My theory was that this was a way of keeping my comp safe from myself, being that I am new to macs and moreso that I am new to the unix side of things and want to start learning the command line without worrying about screwing up my whole system. I would just use the standard account for everyday use (like what I do now) or experiment with terminal, and when I need to download something or change some settings that requires me to be logged in as admin then I would log in and download what I need then log out and use it in the standard account...am I just wasting my time? Is what I am doing any "safer" than just having one admin account and thats it?
Thanks for all the help! It feels good to be a part of the goodguys team =)
Thanks again!

Ghost,
First, I don't subscribe to the "one should not use an admin account" philosophy. For someone who is the owner and main user of any given machine, I see the use of anything but an admin account a bit anal, totally unecessary, and needlessly complicating.
On the other hand, I don't see the need for more than one admin account on any given machine. Yes, I see exceptions to this, and many people favor having a second admin account as a "backup," but I have never had more than one admin account on any of my machines, and have never encountered a situation where one would have helped.
In short, I like the idea of having a "main" admin account that is used most of the time, and then having "secondary" accounts (all non-admin) for any additional users that might log in.
Now, any limitations that apply to you as a GUI user of an account, admin or not, will apply to you at the command line as well. In other words, you can't get yourself into any more trouble at the command line than you can within the GUI. In fact, you might even be better protected at the command line than you are in the GUI. I say this because any action that would ordinarily "elevate" you above the standard capabilities of a non-admin user require the use of "sudo." Avoid the use of sudo, and you can avoid any problems.
That doesn't mean that you wouldn't be able to do something stupid that might wreck an account that contains "all of your stuff," and on which you depend. It is not likely that you would damage your System, but it is entirely conceivable that you might, for example, accidently delete or overwrite your entire HOME folder. Oops!
If you simply don't trust yourself with the command line, a second account might be a good place to experiment. Maybe create it as a non-admin account at first, with the option to change it to an admin account at a later time, when you want to learn how to use "sudo" to do more powerful things. By then, you will understand what not to do. Eventually, you will have the confidence to use the command line in your own account, which will have been an admin account all this while.
Scott

Goods receipt more than intransit quantity for SA

Hi All,
While doing a testing on stock transport order for 2 different company code, noticed that during MIGO in receiving plant system is allowing to receive more than in-intransit quantity for a schedule agreement with agreement type LP and by showing a negative stock in intransit.
Is there anyway to have the system block with error message from preventing user to receive more than intransit quantity for a schedule agreement?

negative stock in transit is not allowed.
so it must originate for a SAP bug.
E,g, OSS note 527403 explains a case for IS-OIL Industry solution.
Oss note 210472 a special case regading previous month.
I found about 60 OSS notes when searching with "in transit negative"

How to pass more than one value for one column in procedure

hi
select id, name from col_tab where dept_name in ('ECE','CIVIL');
when i was running this it is working well.
CREATE OR REPLACE PACKAGE pack_str
AS
TYPE type_refcur IS REF CURSOR;
PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
END pack_str;
CREATE OR REPLACE PACKAGE BODY pack_str
AS
PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
IS
BEGIN
OPEN ans FOR
select id,name from col_tab where dept_name in char_in ;
END str;
END pack_str;
the package was created.
my doubt is
1.how to pass more than one value for char_in (e.g ('ECE','CIVIL'))
2. when i was storing the value in string like val = 'ECE,CIVIL' ,
how to get the id,name for ECE and CIVIL.
plz help me

Hi Rebekh ,
I am recreating your packages for the desired output.
CREATE OR REPLACE PACKAGE pack_str
AS
     TYPE type_refcur IS REF CURSOR;
     PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
END pack_str;
CREATE OR REPLACE PACKAGE BODY pack_str
AS
     PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
     IS
          lv_t varchar2(200);
     BEGIN
          lv_t := REPLACE(char_in,',',''',''');
          lv_t := 'select id,name from col_tab where dept_name in (''' || lv_t || ''')' ;
          OPEN ans FOR lv_t;
     END str;
END pack_str;
Note:-
Input Parameter char_in is a comma seperated value for dept_name
-Debamalya

More than one role for a clip.Is it possible?

Is it possible assign more than one role for a clip?
thx

Only one video role, only one audio roll, per clip. Only one as these are "Media Stems", and when you work with Stems, only one roll per asset video, one per asset audio.

More than one index for a column.

Hi,
I am trying to create more than one index for a particular column of the table.But oracle does not allow more than one index for a column.
I just want to make sure whether we can add more than one index for a column
and if yes what are the scenarios.
Because as far as i know some database allows more than one index for a single column.

You cannot create more than one index for the same column(s).This is not so true Nicolas. Look at following example:
SQL> create index idx_mytest_id on mytest(id);
Index created.
SQL> create index idx_mytest_id_desc on mytest(id desc);
Index created.
SQL> create index idx_fbi_mytest_id_upper on mytest(upper(id));
Index created.
SQL> create index idx_fbi_mytest_id_upper_desc on mytest(upper(id) desc);
Index created.
SQL> create index idx_fbi_mytest_id_lower_id on mytest(lower(id));
Index created.
SQL> create index idx_fbi_mytest_id_lower_id_dsc on mytest(lower(id) desc);
Index created.
SQL> create index idx_fbi_mytest_id_tr_up on mytest(trunc(upper(id)));
Index created.
-- I can still continue but for this example this will be enough
SQL> select index_name from dba_indexes where table_name = 'MYTEST';
INDEX_NAME
IDX_MYTEST_ID
IDX_FBI_MYTEST_ID_UPPER
IDX_MYTEST_ID_DESC
IDX_FBI_MYTEST_ID_UPPER_DESC
IDX_FBI_MYTEST_ID_LOWER_ID
IDX_FBI_MYTEST_ID_LOWER_ID_DSC
IDX_FBI_MYTEST_ID_TR_UP
7 rows selected.You can see 7 indexes for one column (ID) and I could still continue...
So according this test we can say you can't create more than one index for one column (or the same group of columns in case of composite index) with same condition(s).
Message was edited by:
Ivan Kartik
Or simplified: you can't create the same index for same column(s) twice :-)

More than one style for a single link state?

RH 8 outputting CHM
Hello,
Is it possible to define more than one style for a single link state?
For example, I would like a link in the footer of my master page to be smaller than the links that appear in the body of my topics. I want to retain behavior, and simply change the point size.
I can't simply hand format in Design mode, because my link is within a script. Or, am I missing something easy here?
Thanks much.

I'm pleased to say I figured out how to change the formatting of a hyperlink embedded within a script.
Within the script, I used a var string to reproduce the text in my link. Then I used another var to change the string size.
So, here's the part of my script that produces what I'm after:
var mailDisplay = 'Was this information helpful? ';
var str = 'Was this information helpful?';
var mailDisplay = str.fontsize("1");
Upon generation of the CHM, the script trumps the CSS. It's a beautiful thing.

Pass more than one argument for action in the URL

Hi,
i've created a DesktopURL object with which i refere back to the Front Page. With the same URL i want to minimize two channels at the same time. I know that i can minimize one channel with the "action=minimize&provider=myProvider" attribute.
Is there a way to pass more than one provider for an action ?
Or exists another way to do that ?
thx

In fact, my code was completely right. I tried with commas and it hasn't work. When I tried again without commas it worked perfectly...
Nevertheless, thanks for the advice!
Gilmar

More than 3 AR for one Sales Order in relationship map

Hello,
i would need some advice on the following: If you have more than 3 Invoice for one Sales order these are not shown seperately in the relationship map. SAP could reproduce the issue and refers to it as normal system procedure at the moment. They adviced me to post a thread here.Is there any way you could make the invoices be seen one by one.
SAP Version 8.81 PL 5
Thanks a lot for any advices on this topic
Vanessa
Edited by: Vanessa Schürer on Jan 16, 2012 2:45 PM

Welcome to the forum.
If you have any suggestions you post them on sap's new idea collaboration page. You do bring up a good point and hopefully in 8.82 it will be resolved as the relationship map was not originally on the road map. Hopefully they can develop this feature.

SapScript - Print table out_par - more than one entry for object

Hi Gurus,
following problem.
I have a SapScript form and call an external program from within the form.
In this programm I get more than one entry for the same out_par-value - this is correct.
My problem now is that on the form there is only printed one of the entrys.
Here my coding in SapScript.
/:           DEFINE &ZZ_OBJECT& = '        '
/:           PERFORM LESEN_OBJEKTLIST IN PROGRAM ZIHFORM
/:           USING &CAUFVD-AUFNR&
/:           CHANGING &ZZ_OBJECT&
/:           ENDPERFORM
*           All involved object:
*           &ZZ_OBJECT&
Many thanks in advance for your help.
Regards

In Sapscript PERFORM-ENDPERFORM statements, the parameters can contain only one value as they are variables of type character & length 80.
If you want multiple values in your CHANGING parameters, fetch all of them in different variables. Also, in your program store them in the same order, in the output internal table of structure ITCSY.
Check this thread
http://wiki.sdn.sap.com/wiki/display/profile/ExternalSubroutinesinSAPScript

More than 8 colors for /usr/bin/emacs?

Similar Messages

Maybe you are looking for