More than one channel & division for STO

Hi
If I have more than one distribution channel and division, how to do it. As only one distribution channel and division can be assigned in "set up stock transfer between storage locations --> Define shipping data for stock transfer between storage locations"
Thanks

any idea. thanks

Similar Messages

I want to acquire data for multiple channels using PCI 6120 that works on traditional DAQ. I cannot access more than one channel, can someone help me or if someone has data acquisition vi for PCI 6120, please send me over . Thanks

I have PCI 6120 card and I want to acquire data for more than one channels. I'm using traditional DAQ to get it. But it does not work for more than one channels. If someone has a data acquisition vi for PCI 6120. Or some suggestion how to aquire data please let me know.
Thanks

Hello DSPGUY1,
You can definetly acquire from several channels. For your convenience, I have appended below the content from help that tells you how to configure it:
"channels specifies the set of analog input channels. The order of the channels in the scan list defines the order in which the channels are scanned during an acquisition. channels is an array of strings. You can use one channel entry per element or specify the entire scan list in a single element, or use any combination of these two methods. If x, y, and z refer to channels, you can specify a list of channels in a single element by separating the individual channels by commas, for example, x,y,z. If x refers to the first channel in a consecutive channel range and y refers to the last channel, yo
u can specify the range by separating the first and last channels by a colon, for example, x:y."
Hope this help.
Serges Lemo
Applications Engineer
National Instruments

Error using pretrigger when capturing more than one channel

I am having problems acquiring data with pretrigger samples when capturing more than one channel, using NI-PXI-6071E hardware and Labview's Analog Input VIs (Legacy NI-DAQ).
My goal is to trigger on one signal, while capturing another. Unfortunately, I cannot use the PFI0 for external triggering, as our cables/hardware have already been built, so I must use an analog input channel as the trigger. I understand that to do so I must capture both channels, and the channel that I wish to trigger off of must be the first channel in the list.
If I trigger and capture on the same channel (tried 1-4) then it
works great, regardless of the number of pre-trigger samples set. If I
capture more than one channel (passing the trigger channel first), with no pretrigger samples set, then triggering and capturing both work fine. However, if I do the same with the pretrigger sample > 0 I get the following error:
Error -10621 occurred at AI Control. Possible reason(s):
NI-DAQ LV: The specified trigger signal cannot be assigned to the trigger resource.
I don't se any such limitation explained in the user manual, and searching the forum, I have found a few other people that had the
same
problem
but they did not have solutions. Any ideas?
Solved!
Go to Solution.

I'm sorry for double-posting this. I was trying to post it in the DAQ board and it kept ending up on the LabView board.
If moderators have the ability to delete this thread you are welcome to do so.

Analog Source Triggering with more than one channel in channel list

Hello,
I am trying to use an analog reference trigger with a channel list that contains more than one entry using a
M Series 6289. I am aware that this is generally not possible to have more than one channel in the list due to hardware limitations. I was hoping if some sort of workaround exists.
I am using the NIDAQmx C API to control the card.
Using a second card that is syncronized via RTSI should
allow me to use an analog reference trigger to control multiple analog IO channels ... Right ???
Thanks for any advice!
Best regards
Peter

Hello Peter,
If you look at the NI-DAQmx Help, Analog Triggering Considerations for E Series, M Series, and S Series Devices section, it says that to pause multiple channels with an Analog trigger, you must wire that signal to APFI0 or APFI1. Therefore, it is possible to perform this operation.
If you are sharing the AI Sample Clock across RTSI, then you would be able to stop multiple AI channels across multiple devices with the one Analog Reference Trigger.
I hope this helps,
Sean C.

6602 more than one channel

"i cant choose more than one channel on the daq assistent vi to measure.
how is it possible to measure more channels?
my other measures in this vi are done with the traditional daq.
i would like to do this with the 6602 too.
please give me an easy vi or explanation.
is it possible to combine traditional daq and daqmx?"

You're right!
There are two alternative solutions I can think of.
1. Go into MAX (I use v3.1) and create DAQmx global channels for each counter. For example, create CounterFunction0 for channel zero, CounterFunction1 for channel 1, etc. To do this go to Data Neighborhood>>NI-DAQ Global Channels and right mouse click and selct create new NI-DAQmx channel.
After creating these channels, create a NI-DAQmx task.
To do this, go to Data Neighborhood>>NI-DAQ Task and right mouse click and selct create new NI-DAQmx task. When creating the task, you can now select multiple global channels with the shift key. Make sure you click on the global channel tab to enable the view of the global channels you just created.
2. Without usnig Max you can
create a listbox in the LabVIEW front panel and select whatever counter channel you need. You can then convert what is selected into the proper counter string (Dev%d/ctr%d)and then pass this string into the taskID input. Remember, the taskID input in the DAQmx VIs can accept string inputs.
I hope this helps.
Robert

How can I maintain more than one contact person for a supplier

Hi
As per our business requirement , How can I maintain more than one contact person for a single supplier in SRM?
How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier.
we are in SRM 7, and currently we are creating contact person throug customised BDC.
please advice.
Thanks & Regards
NITIN
Edited by: nitinkk on Sep 9, 2011 10:22 AM

Dear Yaniv,
Thanks for your information,
I am able to create users But my problem is How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier ? Is there any kind of maping is available for the user/ contact person to the supplier no.??
Thanks & Regard
NITIN

How can I create more than one printer queue for a printer

I would like to have more than one "default" setting for my printer. This is so I can use a 3rd party print utility (fingerprint) to print to a non-airprint printer from my ipad. The utility prints using the default configuration. I don't need to get fancy here. Just "draft B&W' , "normal", and "Color best quality". If I need something else, I can always email the document to my MacBook. The utility has something about a virtual printer, but all I could find about that is that it is used for PDF printing and maybe a workflow.
My technology level: Used to be a programmer, after a decade of retirement, I can't even program an applescript today.

Take a look at this add-on.
https://addons.mozilla.org/en-US/thunderbird/addon/signature-switch/

EJB3 - More than one remote interface for Session Bean?

Hi,
Is it possible in EJB3 to have more than one remote interface for a SessionBean?
I have seen it posetd on here that it is possible but never been able to find any other information.
Using JBoss as my App Server, I have deployed an App, where a SessionBean is defined as implementing 2 interfaces, both of which are annotated using @remote.
However when I examine the JBoss JMX Console, Global JNDI Namespace only one remote interface is listed, and indeed it is the first one defined in the SessionBean.
Considering I use a String similar to (MyApp/MyBean/remote) to do the JNDI lookup, this would indicate that it is not possible to have more than one remote interface.
1. Is this a JBoss specific limitation?
2. Is there another way of performing the JNDI lookup?
Thanks,
Alan.

Hi,
Thanks for prompt response! I tried the suggestion in my application, and the output from JBoss JMX Console was
+- XXXBean (class: org.jnp.interfaces.NamingContext)
| | +- remote (proxy: $Proxy291 implements No ClassLoaders found for: xxx.xxx.xxx.xxx.xxx.Remote1 (no security manager: RMI class loader disabled))Again only displaying the remote interface that is first in the @remote ({ Remote1.class , Remote2.class}) list. This would lead me to believe that JBoss does not support this.
Can anyone confirm this?
Alan.

How to have more than one free good for a material ?

Hi everyone,
we have this requirement from the user where he wants give more than one free good for a material.
As far as i know we can configure only one free good for a material in standard SAP.
if have any idea about how to achieve this please guide me how to configure the same in SAP.
thank you in advance

Hi
Check my two links where I have explained this.
Free goods using Sale order BOM methodology
Different business scenarios and Sales BOM techniques for header and item level stock and prices
Thank$

More than one Planning plant for a maintenance plant.?

hi Friends, can we have more than one Planning plant for a maintenance plant.Is there any advantage or disadvantage of this condition.?

Hi,
     You can have Maintenance Planning Plant & Maintenance Plant in any of the follwing ratios, i.e., 1:1 / 1:n / n:1. Actually in Maintenance, there can be electrical & mechanical maintenance.
          In the case of 1:1 relation, all the maintenance activities (Electrical & Mechanical) will be planned by single Maintenance Planning Plant for single Maintenance Plant.
        In case of 1:n, single maintenance planning plant will do the plaaning of maintenance activities for all the maintenance plants.
      In case of n:1, electrical activity will be planned by one Maintenance planning plant & mechanical activities by another planning plant for a single Maintenance plant.
      Defining Maintenance planning plant & maintenance plant in different relations will help us in generating different kind of reports.
I am looking forward your reply.
Regards,
Maheswaran.

More than one entity found for a single-object find method

Hi everyone...
I have this error when my webservice is running..I don't know what it means and what would be the best solution..
<pns:message>More than one entity found for a single-object find method.</pns:message>
it throws an Exception..
Thanks!

= More than one row found in a DB with the "unique" key supplied...
Your method is returning an object where it should return a collection ?
Enjoy

More than one outbound interface for the webservice scenario

Hi Experts,
Is it possible to have more than one outbound interface for the Webservice synchronous scenario? I have tried it , but I couldn't implement it.
I would like to have your suggestions.
Regards
Sara

Hey,
Creation of a wsdl file
/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
N:1 seemz he was refering to multimapping scenario.
<b>Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*</b>

How to display more than one column with for each

Hi guys,
how to display more than one column with for each like below?
for each
Item1
Item2
Item3
Item4
Item5
Item6
Item7
Item8
Item9
Item10
End for each
for each
Item1     Item2     Item3
Item4     Item5     Item6
Item7     Item8     Item9
Item10
End for each

Take a look at this to see if the solution provided would work for you: https://blogs.oracle.com/xmlpublisher/entry/multi_column_row_woes
Won't you have more than 10 records in your data file ? If you are going to have only 10 items then you may be able to use position() function to limit it to 3 each..
Take a look at this: https://blogs.oracle.com/xmlpublisher/entry/turning_rows_into_columns
Thanks,
Bipuser

Can we maintain more than one shipping condition for a customer

Hi,
Can we maintain more than one shipping condition for a customer

Hi Raj,
Yes you can maintain the different shipping condition for one customer but for this that SOLD To Party should have different SHIP to Party also as we mainatin the shipping condition for Ship for the party. In other words you can maintain as many shipping condition equal to the number of ship to party.
Other way is if that customer is in different sales area then you can maintain the different shipping conditions for that customer in all the different sales area.
Hope I could make myself clear enough to help you.
Please reward if its useful.
Regards,
Abhi.

Enter more than one personnel number for the same confirmation in CO11N

More than one labor working on Machine work center simultaneously.
So that during production orders confirmation in CO11N we need to enter more than one personnel number for the same confirmation but in CO11N the system allow me to enter only one personnel number.
Note: I can not distinguish between the productions for each labor so that I can not enter separate confirmation for each labor.

Hi,
You can use the User Exit: CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens
for this purpose..
Take help from the ABAPer for this enhancement..
Regards,
Siva

More than one channel & division for STO

Similar Messages

Maybe you are looking for