More than one device connected?

I am testing out a project for a mobile device and  when I package the apk and attempt to launch it on my phone, I get an error message sying that it can't be done because I have more than one device connected. I only have one device connected.
I've tested this project before n my phone and it launched as it was supposed to, but I added a document class to the project and think that might be causing the problem. Previously, I added all of my action script to a keyframe on the timeline, and everything worked fine.
I'd like some feedback as to whether or no the document class issue is the likely problem and how to get around it. If that's not the problem, I'd like to what what might be going on. As always, any help is greatly appreciated. Thanks.

using a document class is not the problem (though your document class may be a problem if it has errors).
use a file explorer to see if your computer lists more than 1 connected device.  or restart your computer to reset its external connections.

Similar Messages

  • Can you have more than one device connected to the same iCloud

    I have my iPhone 4 and iPad mini synced to my iTunes can I add another iPad to the same account?

    Yes

  • Can't connect more than one device.

    I just bought an Airport Express 2 gen from a friend and I have two issues: I tried to reset it to factory settings and could not do it. Tried holding the reset button for 10 secs, unplugging and plugging back in while holding the reset button, holding the button for a longer time and nothing worked. I had no choice but to create another network. Once created, I can't connect more than one device. If I have my MacAir hooked up the network and I try to get my Ipad in, the minute I type the network pass in my Ipad, a screen pops up where I have to log in with my internet provider account. When I do that, it will connect, but my MacAir will disconnect automatically.
    Appreciate any help!

    Things are a bit different with the 2nd Gen AirPort Express and other newer AirPorts.
    A Factory Default Reset is now the same as what was previously known as a "Hard Reset".
    Power up the AirPort Express and let it run a few minutes.
    Hold in the reset button on the Express for 10 seconds
    Release the reset button and allow a full minute for the Express to restart to a slow, blinking amber light
    If the Express is operating correctly, it will be back to factory default settings at this time.
    If you try the reset a few times and the Express will not return to default settings, the Express is defective.

  • Why won't my Time Capsule allow me to connect more than one device to the network at a time?

    Ok here is the shortest story I can come up with...
    Several months ago lightening struck my house and ruined the power cord for my old AIR PORT EXTREME....after replacing the power cable my wireless network began to prohibit more than one device at a time to connect to the wireless network.
    I replaced that network with a new TIME CAPSULE and it is doing the same thing.  I took my old AirPort Extreme to my work and it works like a charm.  My ISP says it is an Apple problem but I have had the same settings both at home and at work.  Work is great, multiple devices connect but home is one at a time and in order to connect ANOTHER device I have to power down one, and reboot the router and fire up the device I wish to connect.
    Any suggestions?

    I am running off a Fiber line....the unit that is a battery back up and appears to be a modem as well is called CyberPower CS24U12V-NA3
    Techincally, there is no "router" in my house, there is a LOCKED control box outside, a battery back up module in the garage that shows battery life and connection, then a cat5 outlet in my laundry room..All of which was installed by my ISP.
    I am using a 2TB Time Capsule running DHCP in Bridge Mode.  I can't find the software version but updated it while installing it within the last two months.
    Under Network Tab
    Enable NAT Port mapping is checked
    Under the Wireless Tab
    we have a 5ghz Network
    Radio mode is set to:  802.11a/n-802.11b/g/n (Automatic)
    2.4 GHz is Auto
    5 Ghz is Auto
    I hope this helps....

  • HT1719 Can more than one device access the same ITunes library?

    Can more than one device acess the same ITunes library?  And if so, does each device's list of songs remain separate and distinct for each device?

    No problems whatsoever. I have 3 iPhones and 3 iPod touches with different IOS connected.

  • How do I use AE to allow more than one device with my cable modem?

    I connected by AE to my cable modem at my house in Japan and it works fine on "bridge mode," but only for one device at a time (this laptop, but not my iPod Touch, or vice versa). As soon as I connect a new device, it will kick the other one off. It seems that my cable modem here will only allow one device. Is there a way that I can use my Airport Extreme to allow more than one device and not have to pay the Internet provider extra for multiple IP addresses? How do I go about this? Do I select "share a public IP address" or do I select "distribute a range of IP addresses?" I tried these options but obviously wasn't doing it correctly, because then I lost the connection for everything... Thanks!

    It would be best if you "hard reset" the Airport Extreme to clear out the old and conflicting settings and then reconfigure it again.
    Hold in the reset button until you see the amber light begin to blink more quickly. Keep holding for another 3-4 seconds when you see this and then release the reset button. That will get the Extreme back to the original starting point.
    After you have powered the modem back up after the full reset, you will need to reconfigure the AirPort Extreme again. If you are using he guided setup in AirPort Utility, you will choose the option to "create a wireless network" during the setup.
    If you are using the Manual Setup, the Wireless Mode will be "Create a wireless network" and the setting for Connection Sharing would be "Share a public IP address". Adjusting the Connection Sharing setting would be the last thing that you do before you click Update to save settings.
    Here, I am assuming that you have a simple cable modem (it will have only one ethernet port), correct?

  • Airport disconnects when there's more than one device

    I've got a really weird problem.. I have an Apple Airport Extreme 802.11n 3rd Generation. Software version 7.6 When more than one device connecrts to the base station it will disconnect everyone and then all devices will go into a connect/disconnect loops. Rapidly. This occurs only with wireless device. I watched the radar on my iPhone (5.1), Macbook running Snow Leopard, Macbook Air running Lion, and iPad 2 (5.1) blinking on and off, on and off. The only way to resolve this is to just have ONE person connect at a time.
    Things I've tried:
    1) Updating all software on all devices
    2) Updating Airport firmware
    3) Reboot and then restoring factory settings on the Airport when the reboot didn't work
    4) Turning off encryption (WP2)
    5) Making sure there are enough IP's for all the devices, turning off robustness, making sure the router is visible.
    Because I know someone will ask this: The Airport sits atop a credenza in the open air. Nothing on, around, or above it. It's been in this position for months with no problem. It's not overly warm to the touch and I even used compressed air to blow out the vents (just in case) when this problem began.
    I read once upon a time that the router gets a cache built up and that can cause these types of issues, but I have no idea how to delete said cache or even if it exists. It's just odd this only happens when more than one wireless device tried to connect to the network.
    Thoughts?

    I've resolved this! For some odd reason Apple won't let me denote this so I'm adding this reply. Turns out the problem was POWER related. The Airport was plugged into a power strip with several other devices. I unplugged all of those leaving just the Airport and the problem has not returned. If I add on all the devices, regardless of the power strip used, the problem returns. So it appears the Airport was just not getting enough power.
    I've got it on a UPS now and the problem has not returned.

  • More than one device is using the same email. Help!

    I use to have an Iphone in the summer but now its disconnected and i left my apple ID signed into my Imessage. I gave this phone to mom and now i have a new Iphone with the same Apple ID signed into my imessage. The other phone is still disconnected but I am 100% sure she is recieving my messages and I can't get a hold of the other iphone. Is there something i can do to my current iphone so she can stop recieving the messages? Will changing the email that i recieve messages at help? or changing the password to my Apple ID? Please help.

    I will restate what is happening.
    Network:
    House; internet to wireless router BEFW11S4 (wireless=off, DHCP=on), 5 computers wired in plus one wireless bridge WET11.
    The bridge talks to a second wireless router in the office (100 feet away).  Wireless=on, DHCP=off, different address!  There are 3 computers there.
    This has worked for years!  There is a third wireless router with wireless=off, DHCP=off and with a different address that is used for a hub.
    Now people come with laptops and want to use wireless. If any of the routers have wireless=on the network crashes with “more than one device with same address”.
    To troubles shoot; I reduced the network down to 3 pieces.  Router in house, 1 computer and the WET11 bridge.  All have fixed addresses!  If I set wireless=on (router), then the bridge and the wireless router communicate wireless and communicate via cat-5.  The network crashes.
    For a test; I connected all three routers together with wireless=on then the bridge talks to all three via wireless and via cat-5 wire. I tried WEP with different pass phrases on each router and different frequencies.  My bridge will talk to all routers it can find on any frequency with any pass phrase.  It may not be able to pass files but it can find all the computers. 
    I believe the router wakes up and sees; 
    its self 192.168.123.254, computer 192.168.123.100 and a bridge 192.168.123.225
    The bridge sees a new network with:
    Router 192.168.123.254, computer 192.168.123.100 and bridge 192.168.123.225
    And that bridge sees a new network with:
    Router 192.168.123.254, computer 192.168.123.100 and bridge 192.168.123.225
    “feed back”
    I really want the bridge to talk to router 192.168.123.253 (office) but not talk to .254 on the same switch/hub (house).

  • Is there a stereo bluetooth headset that can pair with more than one device at a time?

    Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
    Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
    The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
    I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
    Appreciate any and all input. My Googling has returned no results.
    Rick

    TeslasBB wrote:
    pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
    You can only pair one device at a time to your 8330, or any other phone for that matter.  The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again.  Once you turn your bluetooth device on and the phone is on, they will find each other again.
    Hope this helps,
    John
    Stevie Ray! 1954-1990
    ** Don't forget to resolve your post with the accepted solution.

  • I need to connect my iPad to a projector and USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

    I need to connect my iPad to a projector and have USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

    You can connect via a cable or wireless using an Apple TV.
    http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
    Connect an iPad to a Television or Projector
    http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
    Connecting iPad iPhone or iPod to TV or Projector
    http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
    iPad Accessories: Connections for a TV or Projector
    http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
    You may be interested in AirPlay on the Apple TV:
    http://www.apple.com/airplay/
    Alternately, there are Apple Digital AV Adapters for hardwired connections:
    http://support.apple.com/kb/ht4108
    If your location does’t have wifi to use with the Apple TV, use a portable router.
    Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
     Cheers, Tom

  • Can I use more than one database connections in a jdeveloper project?

    I use jdeveloper version 9.0.4.0 (build 1407),Can I use more than one database connections in one jdeveloper project?

    9.0.4 is a fairly old version, so you may only find a few people who know how it worked.
    Assuming you're using ADF BC, once known as BC4J, once know as JBO, in the project, and that the architecture hasn't changed much, then the answer is only 1 connection per project.
    Programmatically you're free to use as many connections via JEE as you see fit, but ADF BC is limited to one connection.
    CM.

  • I have songs from icloud showing on more than one device but only want them on one so how do i delete them

    Can some tell me how i can not have the songs showing on more than one device for my account

    Krshrtr wrote:
    it wont let you swipe to the left on songs that have the cloud next to them
    That's correct - it only deletes them from your phone, not from iCloud
    If you go into Settings, Music and set Show All Music to Off, you will only see the songs that are actually on the phone.
    One other tip - once you've deleted the songs/lists you no longer want, restart the phone (hold the Home and Sleep buttons for about 10 seconds until the Apple logo appears) to make sure the songs are gone.

  • How to use more than one device under same apple ID?

    How do you you use more than one device under same apple ID? say for facetime?

    You don't. One Device and one Apple ID.

  • How to authorize more than one device on my adobe digital editions Ebook reader

    I have a computer, iPhone and iPad, and can't read a downloaded ebook (EPUB) on more than one device  at a time. If I try to open the item on my Overdrive account with a device other than the one I originally used when I downloaded the ebokk,  it gives me an error code "Fullfill  2004. This license has already been fulfilled by another user".  When I contacted Overdrive Media  they explained that I need to contact Adobe to authorize my various devices to have access to my Overdrive account which utilizes Adobe digital editions 4.0
    Please provide info on how to authorize my additional devises to have access to downloaded e-books  on my overdrive account

    Please authorize your devices with same credentials in order to read the book across devices.
    thanks

  • I want to use Back to my mac. When I try to turn it on, it says "Back to My Mac may be slow because more than one device on your network is providing network services.   Turn off NAT and DHCP on one of the devices and try again." How do I fix this?

    Not sure if I am doing this right. This is my first time in the support community.
    I imagine what I put in my heading was supposed to go in here.
    I want to use Back to my mac. When I try to turn it on, it says "Back to my mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again. See the documentation that came with your device for information about turning off network services"
    Does anyone know how I do this? I contacted my ISP (Telus in Canada) and they did not know anything (not that they usually do).

    Why do ISPs insist upon making things so difficult for their customers?
    If you cannot get them to understand that you would prefer to use your own router over their piece of cheap junk, perhaps the information in the following will be useful:
    http://keithbalomben.wordpress.com/2012/03/29/telus-actiontec-v1000h-hacks-and-i nformation/
    Scroll down to DHCP Settings
    You will need to log in with proper "technician" credentials. They are provided in the above link as
    Username: tech
    Password: t3lu5tv
    ... but these may or may not work. Try it, and if you cannot get anywhere at least now you know what to ask Telus to do in return for your business.

Maybe you are looking for