More than one flat files with same external table

Is it possible to create external table in owb associated with more than one file ie to generate code like LOCATION ( FILE1,FILE2) in create table ddl.

Hi,
Yes, you can add multiple files by using the configuration of the external table, and create many instances of 'files'. Every 'file' you specify requires you to specify a location and a file name.
For more details, please review chapter 5 of the user's guide (http://www.oracle.com/technology/documentation/warehouse.html), page 5-15.
Hope this helps.
Mark.

Similar Messages

  • Changing a length of more than one audio file in same time

    Hi! I'm searching a way to change a length of the several audio files at the same time (this applies to ads that will be broadcast at the radio. The sounds need to have same time accurate to milliseconds). Let's say I've got 20 audio ads, which were originally meant to have 30 seconds, but each of audio file has small differences reaching less than a second. I would like to do a one-off activity, that will change length of each file to equal 30.000 seconds. In a word, is there a way to stretch several audio files, which have different time, to the same length at a same time ?

    Thank you for your reply, problem solved with the help of Adobe CC, but it turned out that one of open-source applications also can do it.

  • Can Time Machine perform encrypted backups for more than one computer to the same external drive?

    I have two MBPs.  The older MBP, with 1TB of storage, now contains two other MBP clones, for a total of 3 user machines on 1 MBP).  I'd like to back up both my newest MBP, and the older MBP with the 2 clones, to my new 5TB drive (via wi-fi).  I want to encrypt these backups, but am unclear whether it is possible.  Does TM first encrypt the drive itself, or is each back up separately encrypted?  I understand that if I wanted to encrypt an existing Time Matters backup on a drive, the prior data would be erased and reformatted, but here I am working with a new backup drive, on which one encrypted backup has been performed.
    I just don't want to overwrite this existing backup (which was for my newest MBP).
    Thanks for whatever help anyone can provide.

    You should have prepared the drive better..
    The drive should have been partitioned. It is possible to load the backups.. but you can get into trouble.
    See http://pondini.org/TM/4.html
    Since partitioning at this point would destroy the existing backup.. the best way is to setup a disk image for each of the other Macbook backups and then mount the disk image and use that for the TM backup..
    Encrypting the drive or the backup.. that is something I avoid.. backups to me are useless if I forget or lose the key.. apple have warned lose the key.. the backup is useless..
    But check pondini FAQ .. you might be able to encrypt a drive image.. or the backup.
    http://pondini.org/TM/FAQ.html
    See Q25 and 31.

  • Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes? Both my daughters have ipods, my wife has one

    Dear All
    Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes. My daughters have a different generation 'nano' each & my wife a 'shuffle'?
    Many thanks

    Click here for options.
    (69081)

  • How to open more than one RAW-File by drag&drop/doubleclick with CS2?

    Hello,
    is it possible to open more than one RAW-file from iPhoto with Photoshop's RAW-converter in just one single step? If I drag&drop my selection to my Photoshop-Icon, PS opens just the iPhoto-created library-JPGs of the RAW-files but not the RAWs itself (I've turned out the copyying of the imported photos to the iPhoto-library. Instead iPhoto seems to create a JPG for the library from every RAW I import). If I doubleclick a selection of RAWs in iPhoto just the doubleclicked RAW-File will be opened in Photoshop. Is it possible to select more than one RAW-file in iPhoto and get Photoshop to open all the selected RAWs but not the JPGs? It would make my work a lot easier... thank you.
    rockenbaby

    hello
    try selecting the photos that you want however many- go, File then Export.
    you can make all your file selections image size etc and then save them direct to your PS file.
    hope this helps.
    cjp

  • More than one library (on the same computer) open?

    In the new iTunes 9 it is possible to access several libraries on my home network from the open iTunes window, which is really cool. I wondered if this means it may now be possible to have access to several libraries on the same computer (or connected drives) at the same time. I use 3 different libraries on my work PC and my mac at home and the process of shutting down iTunes, holding down shift/option, reopening itunes, selecting library is rather cumbersome. Having each of the libraries accessible the same way they are for other libraries on the network would be really useful.
    Is it possible?

    pajagsfan wrote:
    Can I create more than one library on the same computer?  Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her.  When I deleted my albums from her library the disappeared from mine. (I think?)
    I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library.  See if the files are elsewhere on your hard drive, or in the Recycle Bin.  When you find them, get them back into your own library.  Now you are ready to help your wife.
    As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly.  It is better to set her up with her own Windows user account. She can have her own iTunes library there.
    Get a copy of your entire iTunes folder to start her off.  She can delete stuff she doesn't want without messing you up.

  • Can i create more than one library on the same computer?

    Can I create more than one library on the same computer?  Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her.  When I deleted my albums from her library the disappeared from mine. (I think?)

    pajagsfan wrote:
    Can I create more than one library on the same computer?  Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her.  When I deleted my albums from her library the disappeared from mine. (I think?)
    I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library.  See if the files are elsewhere on your hard drive, or in the Recycle Bin.  When you find them, get them back into your own library.  Now you are ready to help your wife.
    As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly.  It is better to set her up with her own Windows user account. She can have her own iTunes library there.
    Get a copy of your entire iTunes folder to start her off.  She can delete stuff she doesn't want without messing you up.

  • Is there a case for creatiing more than on flat file sourece system in BI 7

    Hello BI/BW Friends:
    What are the Best practices / recommendations for the number of
    flat file interfaces, Flat file source systems to be created in a BI/BW system.
    I need to load 20 flat files into a BI 7.0 system.
    Is there a best practice in this case?
    Is there a case for more that one Flat File source systems being created to increase the speed or
    parallel extraction of these flat files?
    Am I creating any system contention by trying to extract all 20 of these files through the same flat file source system?
    Any and all comments are appreciated.
    Regarcs,
    Joey G.
    856 912 1136

    You don't need to create several Flatfile source systems for several files uploading, One would do
    You can parallelize the loads with one file source , For performance point of view it's the same even you create several file sources or with one, the only thing you will have to concern is to fine tune the routines if any , load MD and then TD
    If you have several file sources, You may get confusion and has to maintain them across the landscape.
    Best practice would be upload all the files in application server and automate the loads thru process chains.

  • How Can I Update More Than One Ipod on the Same Computer?

    I've had my 30G Ipod since April 2006. For Christmas 2006, I bought my sister a 2G Ipod. I cannot figure out how to put songs on her Ipod as we both share the same computer and Itunes Library. I've already asked Ipod Corporate for help via their FAQ section regarding more than one Ipod operating with the same computer, but their advice (which told me to create a playlist small enough for her Ipod and checked as a shared playlist) did not work for me. I'd really appreciate any help with my problem. Owning an Ipod but being unable to listen to it, as I'm sure many people would agree, is quite annoying.

    There are basically two ways of using multiple iPods on a computer and these involve:
    a) Sharing a single iTunes library and user account.
    b) Creating multiple user accounts and having separate libraries.
    Sharing a Library
    If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish):
    Loading songs onto iPod automatically - Windows
    Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
    iTunes: Creating playlists of your favorite songs
    How to create a Smart Playlist with iTunes
    However since you seem to have a problem with that method you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod
    Separate User Accounts
    Another option is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists
    If you are unfamiliar with setting up Windows user accounts you can read more here: Using Windows XP User Accounts

  • Can I use more than one iTunes account with my apple TV?

    Can I use more than one iTunes account with my apple TV?

    That depends what you mean. If you mean can you purchase from more than one iTunes account on the Apple TV, then the answer is no. If you mean can you stream from more than one iTunes library, which use different accounts, then the answer is yes, so long as they both use the same ID and password for homesharing.

  • More than one reports at the same time?

    Hello
    Is there any way that i can call more than one reports at the same time through the .FMX file. At the moment i can call only one report, if i need to call another report then i have to close the 1st report, then it will show me the 2nd report. Report Background Engine can run more than one reports at the same time?
    Nametullah kalair

    Yes i know, we can submit multiple - asynchronous- jobs, but the problem is, is not possible to open more than one previewer to see multiple reports at the same time for analysis.
    Regards,
    Nametullah kalair

  • Can I sync more than one iPhone to the same computer?

    Can I sync more than one iPhone to the same computer?
    I have one MacBook pro, already have my iPhone synced to it. I want to sync my wife's to it as well so she can share my iTunes library.
    Is this possible?

    Create a new user login (with a password) for your stuff.
    This way, your data won't get mixed up.

  • HT1719 Can more than one device access the same ITunes library?

    Can more than one device acess the same ITunes library?  And if so, does each device's list of songs remain separate and distinct for each device?

    No problems whatsoever. I have 3 iPhones and 3 iPod touches with different IOS connected.

  • How to show more than one report in a same Viewer or Form

    Dear all,
    I have develop many reports with CrystaReport XI and I'm using the CrystalReportViewer to show each of them in VB6. My Question is: Can I show more than one report in a same Viewer? if i need to show the report1.rpt and report2.rpt in a same window how can I do it?
    Sérgio Salazar - Brazilian VB developer

    No and Please re-post if this is still an issue to the Legacy Application Development SDKs Forum or purchase a case and have a dedicated support engineer work with you directly

  • Jquery accordion where we can open more than one region at the same time

    Hi,
    I am trying to create a jquery accordion where we can open more than one region at the same time. I saw a post
    from patrick to do accordion where we can select only one region at a time.I am using Apex 4.0
    Using jQueryUI Accordion with APEX 4.0
    Any input on this will be appreciated.
    Thanks,
    Nav

    Hi,
    As I understand jQuery UI accordion do not have feature you looking for
    Regards,
    Jari
    Edited by: jarola on Sep 7, 2010 12:29 PM
    See documentation from here
    http://jqueryui.com/demos/accordion/#default

Maybe you are looking for

  • How to a make a suggestion about new features i'd like to see in itunes

    how to a make a suggestion about new features i'd like to see in itunes? I can't find any link to do this. I found a page where you can request songs or an album to be added, but i can't find a page to submit my suggestions for itunes i have for new

  • Three Screens

    I have an Intel based Imac...its connected to a second display (30 inch Apple Cinema display)....is it possible to connect it to a third display that would mirror one of the screens...Its for the sound booth in my studio and the third display is a De

  • Set max fetch size on application module

    Is there a way to set max fetch size on application module level, rather then setting it for every view object separately? I don't want to allow any of my view objects in application module to fetch more then 1000 rows.

  • IPod shuffle software update status different between users

    With User 1, iTunes 7.0.2 says my 2G iPod shuffle is up to date (software version: 1.0). If I switch to User 2 and plug the same iPod shuffle into the dock, then iTunes says there's an iPod sofware update available (version 1.0.1). I decline the offe

  • IMac screen issues and iPhoto issues

    Hello all, My girlfriend just bought the imac with the 21.5' screen and recently everytime I scroll the screen gets pixilated.  And for some reason, now on iPhoto the thumbnails come up but when I click on them no picture comes up to full size. It's