More than one HD per AirPort Extreme (802.11n) / different access

If more than one HD is attached via a USB hub, is it possible to setup different access permissions for the HDs?
I would like to use one for the Time Machine, another to be used as a local video server but not accessible from the Internet and the third fully (read/write) accessible from the Internet.

Hi! I've formatted the 160GB USB drive to HFS+ and tried again. I saw that speed access to USB drive was a little bit faster than before.
I simultaneously saved data from 3 PC's. After 5 hours (37 GB transferred) the base station "crashed" without rebooting. The base answered to my pings and the LED was green, the "switch function" worked properly. I tried to reconnect the disk without success. So I tried to access the base via AirPort utility without success: error code 6722 was shown. I physically rebooted the base: same problem occurred (green led, ping ok, no disk access, error 6722). I tried again and waited 5 minutes before accessing the base and the disk: everything worked again
Did any of you already try to put lot of GB simultaneously from more than 1 MAC/PC to an USB drive? Did your airport crash as described? Thank in advance!

Similar Messages

How do I configure the Airport utility to allow more than one rule per port?

How do I configure the Airport Utility (AU) to allow more than one rule per port?
I am on a home network, with broadband cable modem. I have my airport extreme connected to the broadband modem. I have 2 servers in my home that need to be accessed remotely from time (SSH), and they also serve data for an iphone app, so I'm using a variety of protocols. The problem I'm running into is that AU seems to only allow one rule per protocol, so if I go to add another address for access on a specific port that is being used by one of my servers, AU tells me "The Port Mapping Entry Already Exists".
I need to be able to allow SSH on both of my servers, for instance. Am I missing something? Is this doable with AU?
Thanks for any insight.
Khalid

The Port Mapping "rules" on the AirPorts will allow you to: 1. Map a single port to a single IP address OR 2) Map multiple ports to a single IP address.
What you won't be able to do is map a single or multiple ports to multiple IP addresses.

Can I have more than one iphone per email account?

When my son got his iphone 4s I used my email address since he didnt have one yet. I have since gotten an Iphone 4s also, but when I went to activate it I had to put it under another email account, since mine was used for my sons iphone, so I used my husbands. My husband now has an iphone on order and I was wondering if there was a way of having more than one phone per email account?

I would set up a new email for him. That will give you a new icloud account. Also any apps that he downloaded with your ID will forever be linked to that ID and can only be updated with that ID. If that is a problem then you might delete those apps and download them again with the new ID ( and if they were paid apps you need to pay again)

How to make more than one partition on Airport Time Capsule?

how to make more than one partition on Airport Time Capsule?

Only for the very brave......
Open up the Time Capsule (voids the warranty)
Pull the hard drive
Place the hard drive in a separate enclosure
Connect the enclosure directly to your Mac
Use Disk Utility to partition the hard drive
Reinstall the hard drive back in the Time Capsule
For the rest of us.....
The next best thing might be to set up one or more disk images on the Time Capsule, which will allow you reserve a given amount of space for each disk image.
Open up Macintosh HD > Applications > Utilities > Disk Utility
Click on the New Image tab
Navigate to the Time Capsule
Set up the disk image by naming it and specifying how much space you want to reserve

Is it possible to datamerge more than one image per page?

I am building a product catalogue using datamerge. Is it possible to data merge more than one image per page? (ie I have a logo, product image and dimensioned drawing to go with each product page)
What would the coding be for the Data Field Name?
Would it be
@Logo
@Product Image
@Dimension Drawing
Add image fields in the data source file
By adding image fields to the data source file, you can allow a different image to appear on each merged record. For example, when you merge documents that include information from various companies, you may want to include an image of each company’s logo as part of the merge.
Open the data source file.
At the beginning of the data field name, type an “at” symbol (@) to insert text or paths that refer to image files.The @ symbol is required only in the first line; subsequent lines should include the image paths. Paths, which are case-sensitive, must follow the naming conventions of the operating system in which they’re stored.
If you get an error message when you type the @ symbol at the beginning of the field, type an apostrophe (') before the @ symbol (such as '@Photos) to validate the function. Some applications, such as Microsoft Excel, reserve the @ symbol for functions.
(Windows) Example of image references in data source file
Bill Tucker
36
C:\Photos\BillTucker.jpg
Dat Nguyen
53
C:\MyDocuments\dat.gif
Maria Ruiz
26
C:\Photos\Ruiz.psd
(Mac OS) Example of image references in data source file
Bill Tucker
36
Mac HD:Photos:BillTucker.jpg
Dat Nguyen
53
Desktop:Family:dat.gif
Maria Ruiz
26
Mac HD:Photos:Ruiz.psd
You can use InDesign to view the path of an image on your operating system. Insert an image in an InDesign document, and then use the Links panel to view the image’s location. With the image selected, choose Copy Info > Copy Full Path from the Links panel menu. You may need to edit the path after you paste it in your data source. This technique is especially useful for images on a server.

anna-rees wrote:
I am building a product catalogue using datamerge. Is it possible to data merge more than one image per page? (ie I have a logo, product image and dimensioned drawing to go with each product page)
What would the coding be for the Data Field Name?
Would it be
@Logo
@Product Image
@Dimension Drawing
Yes, pretty much exactly as you describe. You would then just add those fields to the boxes in your page. I tend to add an apostrophe before the @ symbol in Excel so it doesn't think it's a function - as per text you quoted above.
If you get an error message when you type the @ symbol at the beginning of the field, type an apostrophe (') before the @ symbol (such as '@Photos) to validate the function. Some applications, such as Microsoft Excel, reserve the @ symbol for functions.

Hacking application id equals() to allow more than one row per "primary key"

I have a read only entity whose primary key is not the real primary key
on the underlying table. The result is that I get more than one row per
"primary key". This is what I want. However KODO will not allow me do
it, because I am storing the collection in a HashSet() and the equals()
method on the application id object ensures that this set contains no
duplicates (as defined by the application id). At least thats how it
seems to behave.
So, I have hacked the equals() method to do this:
public boolean equals (Object ob)
if (this == ob)
return true;
// Doing this because we expect more than one row from
// REF_CODES for the same domain/shortCode combination.
// This is ok to do (I guess?) as long as we are only
// doing selects using this class.
return false;
Will this hack have any side effects? Is there another option? Like
using a list collection? Is so, which collections are supported?
Thanks,
Mike.

The "primary key" I am using it already a compound key of two columns.
The real key on the underlying table is a three column key. But the
problem is that the table represents two different application level
entities. I could deal with it when I was hand-writing SQL (I could do
a distinct for example) but now I am relying on foreign key
relationships since I moved to JDO. Not sure what to do. Best solution
is to rework the table, but there is a lot of legacy code (that other
teams use and maintain) relying on this table. I guess I'll use the
weekend for inspiration ;-)
Steve Kim wrote:
This sounds like a dangerous operation. Even if this works now, I
cannot promise future compatibility... and in fact may result in bad
data (for example in caching both at the PM and PMF level) Is there no
other field that you can reference as part of the primary key? Primary
Keys can be multi columned (e.g. last_name, soc_sec_number)
Mike Hogan wrote:
I have a read only entity whose primary key is not the real primary
key on the underlying table. The result is that I get more than one
row per "primary key". This is what I want. However KODO will not
allow me do it, because I am storing the collection in a HashSet() and
the equals() method on the application id object ensures that this set
contains no duplicates (as defined by the application id). At least
thats how it seems to behave.
So, I have hacked the equals() method to do this:
public boolean equals (Object ob)
if (this == ob)
return true;
// Doing this because we expect more than one row from
// REF_CODES for the same domain/shortCode combination.
// This is ok to do (I guess?) as long as we are only
// doing selects using this class.
return false;
Will this hack have any side effects? Is there another option? Like
using a list collection? Is so, which collections are supported?
Thanks,
Mike.

Importing From Excel file will not import assignments correctly where there are more than one assignment per task

I am trying to import an excel file ... see below. It appears if you select both Tasks and Assignments tables it will not allow you to do this, says file is not in a project recognized format. So I import Tasks tab first then run the
wizard again and import the assignments tab while selecting merge with project option. This works with one exception:
If there are more than one assignment per task. It does not merge in the 2nd assignment, only the first.
Is there a way to import a task with 2 or more assignments?
Background
To figure out what the format for the file needed to be, I started with a MPP file and from project saved as Excel and selected the "Project Template" file. Now I am trying to import that XLS to see how it works
ID
Active
Task Mode
Name
Duration
Start
Finish
Predecessors
Outline Level
1
Yes
Auto Scheduled
DS001
3 days
June 17, 2014 8:00 AM
June 19, 2014 5:00 PM
1
2
Yes
Auto Scheduled
MT001
3 days
June 17, 2014 8:00 AM
June 19, 2014 5:00 PM
2
3
Yes
Auto Scheduled
CT001
1 day
June 17, 2014 8:00 AM
June 17, 2014 5:00 PM
3
4
Yes
Auto Scheduled
CT002
2 days
June 18, 2014 8:00 AM
June 19, 2014 5:00 PM
3
3
5
Yes
Auto Scheduled
DS002
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
1
6
Yes
Auto Scheduled
MT002
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
2
7
Yes
Auto Scheduled
CT003
1 day
June 20, 2014 8:00 AM
June 20, 2014 5:00 PM
4
3
Task Name
Resource Name
% Work Complete
Work
Units
CT001
Engineer1
0
8h
100%
CT002
Engineer2
0
16h
100%
CT003
Engineer1
0
8h
100%
CT003
Engineer2
0
8h
100%
Andrew Payze

Andrew,
I did a quick test using your example although I didn't include the Predecessor or Outline Level fields to keep things a little simpler. I imported the Excel data into a new Project file with a single import of task and assignment data. It is very important
to set up the Excel Workbook correctly. On Sheet 1 I entered the task data (Name, Duration, Start). I did not include the ID or finish date as that is redundant - Project generates its own ID and will calculate the finish date based on the start date and duration.
On Sheet 2 I entered the assignment data basically just as you show it except I didn't include the Units.
The data imported as expected.
John

I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but the printer won't work with the new one.

I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but I'm having trouble with the new one. When I try to print, I get a USB Waiting message on the printer, and when I force a page to print by pressing Go on the printer, I get a page that says ERROR: syntaxerror OFFENDING COMMAND: true. . . .cvt . . . fpgm . . . x . . .lglyf . . . <..J head . . . STACK: / [ -mark- /sfnts I’ve tried shutting down the printer and disconnecting it and the Airport, but that doesn’t help. I reset the settings on the printer. I upgraded the Airport firmware and removed, reinstalled, and upgraded the Lexmark printer driver. After I upgraded the firmware and printer driver, a few pages printed correctly, but then I got the same syntax error page as before. Any suggestions for getting the printer to work correctly?

Use a powered USB hub between the AE and the printer.. the usb port does sometimes have issues.
Try deleting the printer in the Mac and reinstall it.. the change in AE can represent effectively a change of printer.. it is important to make sure that is all up to date.
Beyond that.. USB printers.. ughhh! Consider for two toners you can go and buy a proper network printer.

If i have more than one e-mail account, can i have different sound alerts per account?

If I have more than one e-mail account, can I have different sound alets per account?

No, sorry.

What if i need more than one prepareStatements per connection

hi all!!
Please take some time to look into this scenario.
On the front end: User enters/ updates his/her records and submits. An ArrayList of object goes to backend.
On back end: i have to loop for the size of the ArrayList submitted and see if some record is to be updated or inserted.
Now at back end i do following steps:
I have only one Connection object named connection.
Step 1:
query (say query1 )to see if the record in DB exists for the primary key as extracted from the element from ArrayList. So one prepareStatment ( say prepareStatement1) for this. I write a query and execute :
prepareStatment1= connection.prepareStatement(query1);
Step2 :
A query ( say query2) to update Data in DB. And i have a separtae prepareStatement for this and i execute
prepareStatment2 = connection.prepareStatement(query2);
Sep3
A query (say query3 )to insert Data in DB. And i have a separtae prepareStatement for this and i execute
prepareStatment3 = connection.prepareStatement(query3);
Step4:
for: size of arraylist:
1. take out the element at ith index from the list.
2. see if the record exists i.e execute step1 and see if resultSet.next() is true.
3. if record exists step2 applies so execute update query
4. if record doesnot exist then go to step3 and execute insert query
A weird thing happened .. insert was running fine but update was not. May be i was not checking appropriately. BUT the error that occurrd was that
[Microsoft][ODBC SQL Server Driver]Connection is busy with
results for another hstmt.
So i changed my path and in loop i prepareStatement and execute query to see if record exists or not and store the result in some boolean variable and then close this prepareStatement. and if the result existed again prepare a statement for update or else prepare a statement for insert and execute the respective.
and then again close this prepareStatement and go for next iteration of loop
so each iteration i am preparing statement and then closing it BECAUSE Connection doesnot allow more than one statement per connection at one time. Am i right.??
what should i do.? Although i have solved problem by closing and preparing in loop but that is so inefficient. Is there some elegant way???
please reply.
PS: I am using ms sql server 8.0 as my DBMS. I am developing web application using Sun Creator.

No, you can use as many PreparedStatements as you like, all from one Connection, and you can keep them open as long as you like. (I do this with no problems.) Where you will run into problems is when you are trying to use two ResultSets at the same time. That's what the error message means, it just doesn't use JDBC terminology.

SERIOUSLY slow USB hard drive on the new Airport Extreme 802.11n

I have recently bought the new airport etreme 802.11n. Great little device, look wonderful on the office desk. I had some troubles getting it up and running on my machine but finaly got there in the end.
The USB hard drive is a great little addition that I was very excited about, untill I got it running. It is amazingly slow, for example I tried to copy a folder that contained 15 files which amounted to 135.6mb and it took 20 mins and 24 seconds to upload!
Is this just the speed that it should be uploading or is there somehting wrong with my settings.
I'm running on 3 bars of signal and the settings I'm using are:
connect with password (which is the same as the base stations password)
Automatically discover disks
Show in menu bar
If anyone knows the technical data for the transfer speeds and can confirm my queries I'd really appreciate it!
Thanks in advance

I have recently bought the new airport etreme
802.11n. Great little device, look wonderful on the
office desk. I had some troubles getting it up and
running on my machine but finaly got there in the
end.
The USB hard drive is a great little addition that I
was very excited about, untill I got it running. It
is amazingly slow, for example I tried to copy a
folder that contained 15 files which amounted to
135.6mb and it took 20 mins and 24 seconds to
upload!
Is this just the speed that it should be uploading or
is there somehting wrong with my settings.
I'm running on 3 bars of signal and the settings I'm
using are:
connect with password (which is the same as the base
stations password)
Automatically discover disks
Show in menu bar
If anyone knows the technical data for the transfer
speeds and can confirm my queries I'd really
appreciate it!
Thanks in advance
Does your drive meet these requirements?:
You can connect USB-based storage devices to an AirPort Extreme (802.11n). Learn which formats and protocols are supported.
The AirPort Extreme (802.11n) supports USB storage devices that have a block size of 512 bytes, and are formatted as Mac OS Extended (HFS-plus), FAT16, or FAT32. Not all USB storage devices use a block size of 512 bytes.
The AirPort Extreme (802.11n) shares storage devices based on the format used to initialize the storage device. For example, if HFS-plus formatting was used, AFP and SMB/CIFS protocols are used to share the device on the network. If FAT16 or FAT32 was used, SMB/CIFS protocols are used.
The AirPort Extreme (802.11n) works with disks that have a single partition and are not RAID volumes (no more than one volume per physical disk).
Note: Use AirPort Disk Utility to discover and mount AirPort Extreme-based volumes over the network.
William

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

+For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
*Settings I have Enabled*
5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
Use Wide Channels is recommended for 5 GHz operation.
Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

Airport Extreme 802.11n Wi-Fi not working

I just purchased Apples Airport Extreme 802.11n with the idea of getting just a bit more range than my old airport. This is/was hard to tell since I could not get the unit to function properly.
My internet service requires two address but this A/P Extreme only allowed one. This A/P Extreme 802.11n totally shut down my internet service. It did not allow wireless connection with other computers. The range seemed to be less than my older Airport Extreme 802.11 a/b/g.
I had to re-install my Airport Extreme a/b/g to get things working again.
I went to Apples Products and Service page to find out about the Express registration. Apples registration system did not recognize my serial number. Apparently their specification page recognized some parts of the serial number since the web page did display specification for the Airport Extreme.
DOES ANYONE KNOW THE REASON FOR ALL OF THIS TO HAPPEN?

You said you went to the "Express" page and tried to register above. It may be because you tried to register an Extreme as an Express. I had some difficulty over two months ago registering my Extreme. It let me register it without all the data because it would not recognize the serial number. Called Apple Care and they made sure it was registered.
Also, unless you have an all 802.11n system, you may get a little more range out of the Extreme, but I don't think any more than if you would have used an Airport Express 802.11g. Range and speed are geared toward all n systems.

Airport Extreme 802.11N (5th Gen) frequent crash

I had bought an Airport Extreme 802.11N (5th Gen) that died a few months after purchasing it. I had the unit replaced via Applecare in May 2013.
The new unit's firs recorded crash was in August 2013. After that, it crashed sporadically, these instances were not recorded. In May 2014 it crashed twice in one day. Every time of a crash, I've had to effect a hard reset to factory presets and upload a saved configuration. This last time I reconfigured from scratch and saved the new config. Now it crashes regularly, every month since September. I have no idea what to make of it.
Considering that I had one of the original Silver units running for years (and upgraded with a more capable Orinoco card—if you know what I'm talking about, you know that's old!). I expected to get reliable service from this more advanced unit. So far, It's a bit of a dud.
Any ideas? Any diagnostic tools I can use to see what's happening? Does this run of Airport Extremes have "issues"? Should I bother getting one of the new tallboy unit?
Thanks.

I have found the Gen5 AE to be very reliable.
I would have blamed a dud unit.. except that you have had two of them.. So I would be tracing where the problem is apart from the AE.
What modem do you run? How is the AE setup in the network?
The older utility is of far more use than the one in Yosemite. So do you have available an older OSX version or even windows.. you can see the logs from the unit.. just like you could in the original B and G versions.
(and upgraded with a more capable Orinoco card—if you know what I'm talking about, you know that's old!
Know exactly what you are talking about.. Orinoco were most desired for their use with wifi scanners.
How is your power?? Apple stuff does seem to use stuff that is highly susceptible to spiking. I keep my network stuff on UPS. (or battery direct feed).
I also do not like 7.6.4 firmware.. I know others here might find it ok but I can clearly demonstrate worse performance with it. Direct A-B testing.
Take the firmware back to 7.6.1 and factory reset and see if you get any improvement.
To actually need to restore firmware settings is not normal.. so something major is wrong and in unusual way.. I think power is one key part of it.

AirPort Extreme 802.11n and PowerBooks?

I am about 1.5 seconds away from buying one of the new AirPort Extreme 802.11n base stations to work with my AirPort Express but I have some questions / concerns.
1) Is my Powerbook capable of being enabled to access an "n based network" or is my money wasted on a router capable of speeds my computer can not access?
2) Should my computer be capable of accessing this network, is the Airport Express Base Station I have capable of acting on this network in "N speed" too? I know the base station can be configured to act essentially as a relay to boost signal strength...if set up to do so will it dumb the speed down to "G speed"?
3) If 1 and 2 are true and the express base station dumbs the speed of the N router down, can I configure the airport express base station to ONLY act as a wireless conection to my stereo and not as a wireless router, so as to allow my Powerbook to access the "N" speed network but still broadcast my music wirelessly to the stereo?
Many thanks...I wish they just made this information clearer on pages like this:
http://store.apple.com/1-800-MY-APPLE/WebObjects/EducationIndividualCanadaCustom .woa/9804006/wa/PSLID?mco=F7D93AEF&nplm=D4141ZM/A&wosid=gE4h0LIBbghZ2sXpLP21Wij0 uPJ

Hey for any one still lookin....
1. It all depends on what your CARD is capable of. Your POWERBOOK is more then capable of "N" speeds. Your only limited on the bandwidth of the Cardbus slot. You would have to have a third party card to access the new "N" speeds tho. I'm not sure if the last batch of (pre MacBooks) Powerbooks even made it to the "G" standard. I know Apple just came out with a driver for the latest Macs that have an upgradeable Card and or Basestation to get to "N". I really don't think your Express is upgradeable.
2. You need to look at what models you have to figure out what their capable of. You should be able to go to Apple's web site to find out. Usually the Router will Dumb it down to the SLOWEST speed. Unless you were streaming your music, and playing a game online, and transferring a large file you shouldn't have a problem anyway. As long as you are not using the slowest product it won't dumb down.
3. Haven't got that far yet. I've used up all my brain cells getting this far, so good luck on your mission. Try starting another string with specifics on what you want to do.

More than one HD per AirPort Extreme (802.11n) / different access

Similar Messages

Maybe you are looking for