More Than One OS On Same Machine?:

How exactly does that work? Two Volumes each with an OS on it (and can an added volume just not have an OS), or can the startup volume be partitioned with two OSs??
And whenever the day comes that I get OSX (either on the same one or another one) can the appearance be set to look like OS Classic?

Hi, In-Correct -
...if my 6gb startup volume isn't large enough for 2 OSs.
Although OSX and OS 9 (Classic) are designed to cohabit the same volume (and shipped that way on those machines which came with both OS's pre-installed), as a practical matter that's difficult to achieve on a small drive.
OSX needs lots of space.
A default install of OSX 10.2 and later can take up as much as 3GB of hard drive space. This can be reduced somewhat during the install process by selecting to not install all the various language versions.
In addition, OSX runs best when about 5GB of space is left unused on the volume - OSX uses that for things like its version of virtual memory and to defrag files on the fly.
It's hard to get a satisfactory install of just OSX on a drive as small as 6GB, especially once you start adding in programs, and want to have Classic (OS 9) also available.
In theory it is possible to have multiple installs of OS 9 and earlier on the same volume - there's ways to manage more than one System Folder so that only one is recognized at any time as being valid for booting by the machine. It is very inconvenient to do that, and can easily lead to a no-boot state or other conflicts.
The practical solution when multiple installs of OS 9 and earlier are needed is to place each on its own volume - this can be done by having multiple hard drives available, or by partitioning a drive, or by a combination of those.
The Mac OS is limited to mounting a max of 20 or 21 volumes at boot time. This is usually enough for most of us. The machine I'm using at the present time has ten volumes (including the boot volume) available to it - internal drive #1 has 4 partitions, internal #2 has 5 partitions, plus one external drive. Frankly, I don't access most of those very frequently.

Similar Messages

How to prevent executing more than one client from a machine?

Hi all,
Currently I am doing a client server project in java. The client is java swing. There is a requirement to prevent executing more than one client from a machine.
Now I am relying on socket for this. I listen to a port, say 15000 and when the second session is started it would give an exception at the socket. I know that this a trivial method. Can anybody please suggest a better method. Also is it possible to bring focus to already executing client, if the user tries to execute the client program again in the same machine?
An early answer to this question is highly appreaciated.
Thanks in advance
SSM

Thanks for the suggestion, but I dont think we can use socket for this. And again if we use file for the same as you described, I think it would sometime create a some serious side effects. Suppose after one client session is invoked, the power goes off. In this case the client shut down is not in the normal sequence and hence we cannot remove the file programaticaly. This creates big problem when the user tries to run client again.
I am really interested to know, is there any standard way in java which can be used to achieve this. Also is it possible to give focus to already executing client program if the user tries to invoke the client again.
Thanks
SSM

Can I run more than one Node Manager per machine?

Hia,
We have a situation in our project where we need to run different domains on a Solaris machine in different java modes.
Say Domain1 should be running in 32bit version of java where as Domain2 should be running in 64bit mode due to the nature of testing currently going on in different domains.
We could successfully get the two domains running in different java modes in parallel by modifying the start scripts to decide which Sud data model to start the servers based on certain parms. However, the pain here is with the Node Manager.
My understanding is that there should be one Node Manager running per machine for all the domains running on that machine. So when ever I have to run a domain in a java mode different to that of what Node Manager is running on, I had to kill the node manager and start it in the same version that I want to start the other servers in since Node Manager uses its starting parms internally to start the Managed Servers (Note: there is no issue in running the Admin Server regardless of the node manager mode as expected).
Can somebody advise me if there is any way to get around this hassle?
I want to know if we can run more than one node manager per machine.
Below are the details of my env.
Weblogic Server 10.3
Solaris 10 SPARC 64 bit (SunOS 5.10 Generic_142900-14 sun4v sparc)
java version "1.6.0_20"
Hope all this makes sense...
Cheers,
Satish.
Edited by: apsnaidu on Mar 15, 2013 3:29 PM

You can run as many node manager as you want in a particular machine.
At the time of starting the node manager you need to pass hostname & Port.
This will start the nodemanager on different ports of a machine.
sh startNodeManager.sh <hostname> <port>
eg:- sh startNodeManager.sh dev_machine_01 5556
sh startNodeManager.sh dev_machine_01 5557
sh startNodeManager.sh dev_machine_01 5558
After starting your node manager in different ports you need to change machine details from admin console.

How to deploy a Webapplication on WAS more than one times on same server?

Hi all,
I 've a special problem:
In our web-app (some DC's) also stored propertie-Files. Now we would to deploy this application more than one times at same server using different WebContentRoots. (f.e. http://server/app1 and http://server/app2 a.s.o.)
We know, that we must create different EAR-Projects and refer the web-Module and configure the application.
But in the second application there it's recommended to change some properties.
How we can handle this in JDI without copy the web-application?
I hope my question can be understood.
Best Regards
Sven Rickelt
Using Netweaver + WAS 6.40 2004 SP 13

Hi Sven,
as I'm new to NWDI, I cannot give you a 100 percent, field-tested solution. But have you already thought about using the Configuration-Adapter?
If you can change the source of your web-app, you could maintain the data formerly stored in property files using the configuration adapter of visual administrator. The SC <a href="http://help.sap.com/saphelp_nw04/helpdata/en/45/e7e14b517b42788a1c166f9f32455e/content.htm">configuration</a> allows you to access this data.
With this approach you can stick to one web-application and do the configuration work separately for each deployed application.
Best regards,
Frank

How to use more than one device under same apple ID?

How do you you use more than one device under same apple ID? say for facetime?

You don't. One Device and one Apple ID.

Failed to upgrade more than one table at same time

Hi
In Deployment Manager, I failed to upgrade more than one table at same time.
I tried to hightlight 4 tables and set the default action as Upgrade, and click File/Generate Deploy. It passed the code generation step then I click Deploy, they are all failed with no error message.
But they are all successful when I upgrade them one by one. Any one has any idea about this?
For the known reason, we have no choice to do the deployment with action of 'upgrade' through OMBPlus, instead, can only do that interactively through OWB Client. I can't imagine to ask our Production side DBA to upgrade 80 tables one by one. Or I have to use the generated scripts to do the upgrade, which will resulted in 'no deploy status updated' in OWB. Any help will be very appricated.
The version I'm using is OWB 10g.
Thanks,
Daming

Hi
First of all, Patrick's solution doesn't work for me. I didn't do cloning and there is no problem when check the WB tables.
Second, I think your solution is only good for the developing environment just to get tables upgrade via deployment manager. In most cases, when you do a new release on PROD environment you just exp/imp the MDL file from DEV to PROD and any developing is not recommended on PROD. But your approach is trying to manually the DB, and then EDIT the mapping to do the Reconcile and then deploy. Surely you can do that if you have full control on your PROD side. However, in my situation, I have no access to the PROD for the security reason and an DBA Operator of the Client is responsible to implement my Migration process on PROD by himself.

Align more than one element in same line in a selection screen

I have to align more than one element
in same line in a selection screen.
It is possible with the following code.
now the problem is i need space between these elements. how can i achieve it?
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (8) txt1.
PARAMETERS :      location AS CHECKBOX,
              loc(5) TYPE c.
SELECTION-SCREEN COMMENT (15) txt2.
PARAMETERS :     dept AS CHECKBOX,
              dpt(5) TYPE c.
SELECTION-SCREEN COMMENT (7) txt3.
PARAMETERS : product AS CHECKBOX,
               prdt(5) TYPE c.
SELECTION-SCREEN END OF LINE.

Hi,
Use SELECTION-SCREEN POSITION option.
ex: SELECTION-SCREEN POSITION 15.
Sample code:
selection-screen: begin of block blk1 with frame.
selection-screen: begin of line.
parameters: R1 RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN position 5.
SELECTION-SCREEN COMMENT 6(5) comm1.
parameters: R2 RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN position 14.
SELECTION-SCREEN COMMENT 15(5) comm2.
selection-screen: end of line.
selection-screen: end of block blk1.
initialization.
comm1 = 'File1'.
comm2 = 'File2'.
Edited by: Velangini Showry Maria Kumar Bandanadham on May 27, 2008 2:54 PM

Pop to get more than one value of same type

Hi
I want to give pop up that can take 3 customer numbers
and export it.Problem with popup_get_values function module is that you cannot get more than one value of same type for example here kna1-kunnr.
Is there any function module to solve this problem.
Regards
Amol Deshmukh

Hi,
may be you can use knvv-kunnr for the second value ....
That should also do the job.
regards
Siggi

More than one instance of same Declarative Component in a single JSF page

Hi,
I have problem in using more than one instance of same Declarative Component in a single JSF page.
Only one instance is visible/rendered.
If I drag and drop more than one instance of same Declarative Component in a single JSF page, only one is displayed.
Not sure why is so....have I missed on some configuration?

What version of JDeveloper are you using? What declarative component?
In general when creating JSF UI components, care must be taken to avoid certain pitfalls that happen when one uses that component more than once in a page...so depending on which component you are using, one might surmise that more or less care was taken on that component when building it.
If it was well tested though...like if it was an ADF Faces component, then that is probably not the problem.

Can i create more than one db in a machine?

can i use "create database" to create more than one db in a single machine?

I understand what you're saying and it's sound advice. When you said crash I took it as meaning at the database level
and not the server level. As I said before, one database crashing will not effect another on the same server. If the server
crashes both databases will crash too. I think we both agree on that.
then you will have more than one job in hand.... And to get things up-and-running, will take that much longer.....True, but there's other things to consider in the real world. For example one of our servers contains our development/test
database and our production database. I hate to sound like management here(which I'm not) but why should we buy another
server for 5-8 people to use for development/testing? The cost of a few developers not working for a while and DBA restoring
the database in the rare case of a server crash is less expensive than buying a second server. Maybe if we had more
developers for this system a second server would be justified. Another reason for not having a second server may be that some
people can't afford a second server.
So can you install more than one database on a server? Yes
Is it better to have one database per server? Yes
Is it always justified to have one database on a server? No

Is it possible to place more than one Item on same line on the FORM

Can we placed more than one Item on the form?
for ex: I want to use TextFields to input the Date of birth in form of DD/MM/YY
I want to put on the form like
Enter DOB :- DD MM YYYY
Please suggest if it is possible any way in J2ME

It will depend on the phone. There is no way of knowing if the items actually will be on the same line or not. On a phone with a small screen, the items are likely to end up on two lines.
You can however make sure that the lines will occupy two lines by using the setLayout(int layout) method which belongs to the Item class.

More than one account on same computer?

Can I have more than one account on the same computer? Each account would have its own iPod and library. Thanks, Kristy

uhm i did what the second person said...i held down the shift key and made another library but it deleted the first one....so i made another one and when i tried to open the library that deleted the first one...it was gone..
haha ik confusing help plez? and if i made seperate accounts would that rly help? could i have totally different music in each one? thanx

How to apply data into 2 tables AND to more than one record in same table?

Hello,
I am trying to apply/insert data into 2 tables AND at the same time apply data to more than one record (in the same table). How would I do this in APEX?
I have updated using one table with no problem, however, when I try updating with the two tables/ multiple record sets, I get errors.
I appreciate the help.
Thanks.
Linda

You can achieve what you want using PL/SQL. Can you post ur code?

TableView - Filter more than one value in same column

Hi folks,
I faced a problem on filtering a field more than one value.
Does it possible solution for us to bring out filtering function while user try to enter few values in the SAME filter field?
Thank you.
First, i need to clarify my exact problem.
--> I have created one tableView with filter = "server". Then i want to allow my user to enter few filter values in same field column.
Example 1:
Before
COL1 COL2 COL3 COL4
l--II--
l-filter1I--I--
*filter1 = AAA, BBB
AAA AAA AAA AAA
BBB BBB BBB BBB
CCC CCC CCC CCC
DDD DDD DDD DDD
EEE EEE EEE EEE
After
COL1 COL2 COL3 COL4
l--II--
l-filter1I--I--
*filter1 = AAA, BBB
AAA AAA AAA AAA
BBB BBB BBB BBB
Is that any good suggestions to solve my doubt?
Message was edited by:
 GP Poh

check out this work around. in this sample currency column supports multiple values and multiple values in the filter column should be enter with comma as separater.
page attribute:
filtertab TYPE RSELOPTION
filter_wa TYPE RSDSSELOPT
itab TYPE FLIGHTTAB
layout
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page title=" " >
 <htmlb:form>
 <htmlb:textView id ="tex"
 text = "Filter on Currency Column support multiple values, they can be entered with comma as separater like 'usd,DEM'"/>
 <htmlb:tableView id = "tv1"
 design = "ALTERNATING"
 table = "<%= itab %>"
 filter = "APPLICATION"
 columnHeaderVisible = "true"
 sort = "SERVER" />
 </htmlb:form>
</htmlb:page>
</htmlb:content>
oninitialization
select * from sflight into table itab where currency in filtertab .
oninputprocessing
* event handler for checking and processing user input and
* for defining navigation
DATA: table TYPE REF TO cl_htmlb_tableview .
DATA: tv_data TYPE REF TO cl_htmlb_event_tableview.
DATA: filter_value TYPE string .
DATA: fil_val TYPE STANDARD TABLE OF string ,
 fil_val_wa TYPE string .
REFRESH filtertab .
table ?= cl_htmlb_manager=>get_data( request = request
 name = 'tableView'
 id = 'tv1' ).
IF table IS NOT INITIAL .
tv_data = table->data .
IF NOT tv_data IS INITIAL .
 CALL METHOD tv_data->get_row_filter_value
 EXPORTING
 column_index = 6
 RECEIVING
 value = filter_value.
 IF NOT filter_value IS INITIAL .
 TRANSLATE filter_value TO UPPER CASE .
 REFRESH fil_val .
 SPLIT filter_value AT ',' INTO TABLE fil_val .
 CLEAR fil_val_wa .
 LOOP AT fil_val INTO fil_val_wa .
 filter_wa-sign = 'I' .
 filter_wa-option = 'EQ' .
 filter_wa-low = fil_val_wa .
 APPEND filter_wa TO filtertab .
 ENDLOOP .
 ELSE .
 REFRESH filtertab .
 ENDIF .
ENDIF .
ENDIF .
Regards
Raja

HALO more than one player ON SAME MAC?

Can you use those USB controllers (sold by Apple) to plug into more than one port so as to play kinda like you do with an XBOX? The old XBOX allows up to 4 screens w/ 4 players. (I'm NOT talking about "multiplayer" internet games). I want to hook it up for my teens to (using the TV screen) play w/o buying an XBOX 360.
intel mac book pro Mac OS X (10.4.8) 3 gb RAM

In short no, only one person can play the campaign. You need 2 computers for "lan" local play or you could play online with other players. cheers JAG

More Than One OS On Same Machine?:

Similar Messages

Maybe you are looking for