More than one podcast episode at a time

When a podcaster posts two or three episodes at once (defined as "between times that I launch iTunes"), iTunes only downloads the last one.  How can I tell it to download all of them?  (Without also retrieving hundreds of ancient episodes as well.)

In 'My podcasts' view, if necessary click 'Show all' at top right, then when it's showing then click 'Add all'. Click on the cloud-with-a-down-arrow icon to the right of each episode to download that episode. You can play any episode without permanently downloading it by double-clicking on it (obviously it uses the same bandwidth as downloading but the file doesn't have to be downloaded first and is not retained after you've listened).

Similar Messages

  • Cant download more than one podcast on my iPhone

    Hi,
    It seems that I cant have more than one podcast on my iPhone: I downloaded one OK (e.g. episode 1), then went to "Get More Episodes...", which took me to the correct page on the iTunes store, tapped on the arrow for a second podcast (e.g. episode 2). The download seems to proceed and complete as normal, but then the arrow reappears and the podcast is nowhere to be found on my iPhone. I tried several times, to no avail. As a test, I deleted episode 1 from my iPhone, and then downloaded episode 2, which worked just fine. If I then try to download episode 1 again (with episode 2 already on the phone), the problem re-occurs. So it seems as if there is a hard limit on only one podcast on my iPhone. I also tried downloading podcasts from other sources and the problem remains. I dont think it is a space issue as I have about 1GB left on my iPhone and each podcast is about 50MB. I have tried a soft reset, but again that didnt help.
    Can anybody help?
    Many thanks in advance,
    Arnaud

    Hi. First make sure you have the latest phone update (menu-settings-phone-phone mgmt-device updates-options-check for updates).Next, the Nokia c6-00 only has 128mb of RAM. Approx 80mb is needed to run the device. So that does not leave much for running APPs. When you run an APP you need to close it by using the exit command on the left. If you exit via right it leaves the APP open. Not all  open APPs are visible when you press and hold the middle button. Download App Stop from Nokia Store.I have it as a homescreen widget. I use it all the time to ensure I have closed an APP after leaving it. Also I switch off then reboot my phone each week. After it has settled down I use  App Stop to close all APPs opened on boot up usually contact, clock etc.(Use once then again just to be sure.)  Another good APP is Ergo's MemInfo which shows exaclty how much RAM is being used, you will need to Google for this APP. RamInfo is a more basic APP which is free from Nokia Store. I hope this is helpful.

  • Drill down more than one characteristic at the same time.

    Hi,
    Is there any way to drill down more than one characteristic at the same time?
    When I drill down by 0cust_sales I would like to have drilled down: division/distrchan/salesorg/cust_sales without having to do that one by one.
    thank you!

    Hi,
    This cannot be done unless these characterstics are related to each other in some way as Charactertics & Display Attributes.
    The reason being when you drill down the 0cust_sales , there is no link from 0Cust_sales to the other characterstics hence there is no prompt for these characterstics to be drilled down.
    However, a smiliar thing might be acheived by adding these chareacterstics into the 0cust_sales in teh query designer by dragging n dropping them over 0cust_sales. you can try this and see if this is close to your requiremetn.
    Kind Regards,
    Tapish

  • More than one reports at the same time?

    Hello
    Is there any way that i can call more than one reports at the same time through the .FMX file. At the moment i can call only one report, if i need to call another report then i have to close the 1st report, then it will show me the 2nd report. Report Background Engine can run more than one reports at the same time?
    Nametullah kalair

    Yes i know, we can submit multiple - asynchronous- jobs, but the problem is, is not possible to open more than one previewer to see multiple reports at the same time for analysis.
    Regards,
    Nametullah kalair

  • Can I use more than one bluetooth device at a time with my iphone4

    Can I use more than one bluetooth device at a time with my iphone4

    Anthony
    I have a Plantronics 975 earpiece that works very well with my Razr.  I
    just got a Panasonic KX-TG7873S phone system for my home, it has a
    "Link-to-Cell" cellular convergence solution, from what I understand it is
    just Bluetooth enabled.  I have paired both device with my Razr.  In
    settings, Bluetooth setting, both device show.  But only one device can
    connect at a time.  If my Plantronics is connected and I choose the
    Panasonic device, the Plantronics device disconnects and the Panasonic
    device then says it is connected.  Both devices work when they
    are connected.  Is it because they are both "headsets"?
    So, to have to remember to connect to one or the other device, depending on
    weather I am coming or going is not practical.
    On Sat, Sep 14, 2013 at 1:14 PM, Verizon Wireless Customer Support <

  • HT1657 Can you rent more than one movie at the same time?

    Can you rent more than one movie at the same time on itunes?

    I think Justin is correct and you should have statistics in place and a reasonable partition scheme so that the optimizer selects the correct partitions rather than telling it what to do. You paid a lot for partitioning after all.
    There are some, possibly misguided, examples in the manuals showing how to create a view so you can delete from a single partition without specifying the partition criteria in the delete statement. This in effect turns partitioning back into DIY partitioning i.e. separate tables, union all and pretend its a single logical table using a view. But backwards.
    So to do what you want you just assume the partitions are separate tables, and then use union all to glue the ones you want back together.
    select * from sales partition (sales_q1_2000)
    union all
    select * from sales partition (sales_q1_2001)
    union all
    select * from sales partition (sales_q1_2003)
    union all
    select * from sales partition (sales_q1_2004);It probably goes without saying that as well as making the expensive version of partitioning behave like the free alternative, there is the possibility that it will perform like it as well.

  • How do I view more than one image at the same time in CS6?

    How do I view more than one image at the same time in CS6?

    Hi there
    If you go to Window > Arrange you can choose from several view options. Below I have selected Two-Up Horizontal since I have two images, but you can select other options if you have more than one image.

  • Why won't data merge allow more than one data source at a time?

    I need to number tickets, 8 up on a tabloid page, in InDesign (CS5)
    I have found out how to use data merge, but it won't allow me to select more than one data source at a time, therefore, making me use 800 sheets of paper instead of 100. That's not acceptable!! Is there a way to merge the pdfs if I make 8 different ones in the places they need to be? Each file that I export will have 100 pages, so is there a way to merge the files to put all eight tickets on each sheet, sequentially? This is driving me nuts!!!!!!!

    Past users have solved this frustrating problem. You can find their solutions with a Google search like "InDesign data merge multiple sequential items on one page" without quotes.
    HTH
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices
    Frankie at Quad wrote:
    I need to number tickets, 8 up on a tabloid page, in InDesign (CS5)
    I have found out how to use data merge, but it won't allow me to select more than one data source at a time, therefore, making me use 800 sheets of paper instead of 100. That's not acceptable!! Is there a way to merge the pdfs if I make 8 different ones in the places they need to be? Each file that I export will have 100 pages, so is there a way to merge the files to put all eight tickets on each sheet, sequentially? This is driving me nuts!!!!!!!

  • Can't Open more than One Internet Browser at a Time

    I bought a Toshiba laptop this past spring which I use, offline, at the office.  i've had a problem with it since the day I hooked it up to the internet the first time.  I can't open more than one internet browser at a time.  Windows 7.  I had need to get online with it today and had forgotten about this problem.
    I called Toshiba and they wanted to sign me up to some fee-based service.  They said, without checking anything (or even asking me who I am, or what my computer serial number is) that I had a virus.  Is there a virus going around that causes this problem?  IF so, how could I possibly get it considering I bought this computer in a sealed box?
    My AV software does not pick up any viruses.  I use Avast.
    Can anybody help me? 
    Thanks.

    There's a handy reference for keyboard shortcuts here:
    http://windows.microsoft.com/en-US/windows7/Keyboard-shortcuts
    That Windows key turns out to be useful, try Windows-D to show the desktop
    To open a new browser window, Ctrl-n while in the browser will probably work, or it your browser supports tabs, try Ctrl-t

  • HT5019 MacPro laptop display and 2 external monitors (three displays). Can I have more than one application displayed at a time?

    I would like to have my MacPro laptop display and 2 external monitors (three displays). Question, how can I have more than one application displayed at a time? IE: I would like email on one monitor, Finder on my laptop, and iTunes on the other. Possible?
    With extended desktop, it appears that I can only have one application presenting at a time. Sort of defeats the purpose of having multiple displays.
    I am using the HDMI and the mini HDMI connectors.

    I would like to have my MacPro laptop display and 2 external monitors (three displays). Question, how can I have more than one application displayed at a time? IE: I would like email on one monitor, Finder on my laptop, and iTunes on the other. Possible?
    With extended desktop, it appears that I can only have one application presenting at a time. Sort of defeats the purpose of having multiple displays.
    I am using the HDMI and the mini HDMI connectors.

  • Printing more than one greeting card at a time?

    Does anyone know whether iPhoto 6 lets you print more than one greetings card at a time to save on postage? The postage changes for one type of card if you order 10 or more copies so I was wondering whether you could order 9 different cards (ie with different designs and pictures) and only pay for one lot of postage?
    I've had a quick look on the apple support page and in iPhoto help but haven't yet found anything that addresses this issue.
    Many thanks.
    Powerbook G4   Mac OS X (10.4.4)  

    i too recently emailed apple about this, and have not recieved a reply.
    however, i just found this statement on the support page:
    http://www.apple.com/support/iphoto/customerservice/cards/
    Can I order multiple cards in one order?
    You can order multiple copies of the same card in a single order, but a separate order will be placed for each unique card. For example, changing the color of your card will result in another order.
    sounds like the answer is no.

  • How can I have more than one page open at a time?

    I would like to have more than one page open at a time- not tabs, but whole pages. How can I do this? I want to be able to have the pages side by side, instead of having to switch back and forth.

    Fox Splitter (formerly Split Browser): https://addons.mozilla.org/firefox/addon/4287

  • Trouble playing music on more than one "airport" at the sae time

    Now that I havew added a second airport base..I cannot play music in more than one room at the same time...when I try and choose multiple speakers...it states that the particular airport cannot play simultaneously...i have an HP Pavillion, a Mac Book on a Netgear network router....Is there a set up procedure to allow playing music simultaneosly?
    Sorry for the run on question..
    also is there Apple live telephone support? i cannot seem to find it
    Thanks Mike

    Are all the Airport Express units using firmware 6.3?
    iFelix

  • Jquery accordion where we can open more than one region at the same time

    Hi,
    I am trying to create a jquery accordion where we can open more than one region at the same time. I saw a post
    from patrick to do accordion where we can select only one region at a time.I am using Apex 4.0
    Using jQueryUI Accordion with APEX 4.0
    Any input on this will be appreciated.
    Thanks,
    Nav

    Hi,
    As I understand jQuery UI accordion do not have feature you looking for
    Regards,
    Jari
    Edited by: jarola on Sep 7, 2010 12:29 PM
    See documentation from here
    http://jqueryui.com/demos/accordion/#default

  • Add Suppporting Details for more than one periods at the same time for the same Account in Planning.

    As we know, in planning form, we can add supporting details to one cell for the level 0 members intersections.
    But can we do that as below:
    add supporting details for more than one cells at the same time?
    I tried to do that in workspace and smartview, neither is working.(my workspace version 11.1.2.2.300.20)
    I wonder if i am not with the right version, because i don't know how to get the below.
    Can any one explain?
    Thank you.

    Hi,
    I have tried in Smartview for a simple form where my period dimension was in columns and accounts in rows.
    You need to select multiple period and select supporting details, it will show those selected period for which you can add the supporting details.
    You can add these details and then submit the data in the form.
    Regards,
    Sourabh

Maybe you are looking for

  • Database open (recovery) taking too long

    Hi, Ive been using your awesome BerkeleyDB Java Edition for a couple of years, and have been very happy with it. I am currently facing an issue with trying to open the database after a disk-full issue (which resulted in the database being unable to w

  • Delivery cost in scheduling agreement having time dependent condition

    Hi experts, We have one peculiar requirement. We have palnt at indonesia.  We are doing import there from india. Our requirement is as follows. 1. We should use scheduling agreement with time dependent conditions.  Because we want to track the price

  • Program has to display the calender year with certain dates highlighted

    The program will have a selection screen with the parameter option for empid (Provide F4 help) and select option for Start Date and End Date (Provide the F4 functionality to the date fields.) 2.        When the user  Executes the program, the program

  • Help! Poor quality uploading photos

    My camera is a 10 megapixel and photos turn out beautiful on the camera's screen. Once I upload the pics into iphoto, they look just as terrific. The PROBLEM is when I try to upload to an independent site such as Snapfish, Photobucket, Shutterfly, et

  • Multiple image selection.

    Hi java professionals... I have a coursework, to write an interface for NIM game. My main problem is to select multiple images. Basically I need to code something similar to this (http://www.robtex.com/robban/nim1.htm) design, like select several ima