More than one problem with my fifth generation iopd

i just got my ipod 2 days ago. yesteday i was putting music and videos on it with no probleams.the batery died completley yesterday.when i went to charge it today, my laptop did not recognize it on my computer or itunes.but on the ipod it said please wait, battery very low and it seemed like it was charging.a few seconds later, the "sad" icon apeared and underneath it it says www.apple.com/support/ipod and then it would go back to saying please wait, battery very low.and the same thing will repeat. i have also tried restarting my ipod, but that wont work.
i am running windows XP home on my laptop.
if anyone knows whats wrong with my ipod, please answer my question.
thnx.

One thought that comes to mind is that XP by default, I think, has the settings for the USB ports to power down when not in use. By "in use" they mean data being transferred, not charging something.
So first thing to try is go into your control panels, system, hardware, device manager, then open the USB section. Highlight and then right click and each and every USB Root Hub listing you see. Pick properties and go to the Power management tab. Uncheck the box the turns off the USB port power when not in use.
Now plug you iPod in and see if it charges properly now. If it is very low in power it may not turn on at all for a while (minutes to a half hour) while it trickle charges up to a safe level before powering up again.
Patrick

Similar Messages

  • More than one problem with messages app

    I'm trying to get this Messages app to work properly on my iphone and macbook pro.  I have a few problems that are just very annoying and I can't seem to figure out what I am doing wrong.  I'm sure it is some stupid setting I am overlooking, but I have exhausted my brain for the day. 
    1st problem - I can send and recieve messages on my mac and iphone.  That works fine, but there are no notifications on my mac when I send a message from my iphone.  The message shows up in the app, but it doesn't give me a notification or a badge that there are new messages.  I have it turned on in the settings, but it just won't work...
    2nd problem - My phone is the only one that is working.  My whife has been sending me imessages from the other room for the past hour testing out the app and I get the messages on my phone, but none are showing up on my mac.  I thought they were supposed to go to both?
    I really hope someone can help me here.  I am very frustrated with the whole thing. 

    HI,
    On the iPhone in Settings > Messages > Received At > Caller ID there should be two "IDs"
    One is the iPhone's own number and the other should be the Apple ID.
    If the Apple ID is ticked then iMessages sent from the Phone should sync to the Messages app.
    However incoming iMessages to the iPhone via it's Number will not sync to the Messages app.
    This is apparently coming with the iOS 6 release.
    For the Messages App check System Preferences > Notification and the app name and check if it supposed to be using the Dock badge, make sound or display Notifications (Alerts or Banners)
    10:11 PM      Friday; August 10, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I have more than one problem with my new ThinkPad Twist

    I posted a little over a week ago about the LED indicator on the back of the lid no longer working. Lenovo Customer Service sent me a box in the mail, but I need to find some time off for me to send it in.
    I discovered earlier this afternoon that when I turn the computer screen around and fold it back, the sensor that detects when it is folded back no longer registers this signal to the computer for it to activate autorotate mode. This seems like it's more likely to be a software issue, but I don't have the knowledge to really troubleshoot, so after rebooting and checking for Lenovo updates, I thought I would see if it would resolve itself after a few days.
    Then I found that the volume rocker below the screen doesn't work. But it gets better than that: you can turn the volume up perfectly, but you can't turn it down. Everything about the buttons feels and sounds normal, but it simply doesn't receive that signal. I just don't get it.
    I've had this computer for only a month and a half. I had heard that ThinkPads were pretty decent computers, but for owning it after 4-6 weeks of light-medium duty and having the nifty LED indicator to go out, the automatic auto-rotate trigger to mysteriously stop working, and for this volume button to stop........this looks like a mediocre product to me.
    I've determined that the dysfunctional LED is, in fact, definitively a hardware issue. Is there some way to check on the other two?

    One thought that comes to mind is that XP by default, I think, has the settings for the USB ports to power down when not in use. By "in use" they mean data being transferred, not charging something.
    So first thing to try is go into your control panels, system, hardware, device manager, then open the USB section. Highlight and then right click and each and every USB Root Hub listing you see. Pick properties and go to the Power management tab. Uncheck the box the turns off the USB port power when not in use.
    Now plug you iPod in and see if it charges properly now. If it is very low in power it may not turn on at all for a while (minutes to a half hour) while it trickle charges up to a safe level before powering up again.
    Patrick

  • WebLogic Error : Registered more than one instance with the same objectName

    HI there, I'm facing a big problem. I have two environments installed on the same physical machine.
    I have ALSB and WLI servers running out there.
    Environment 1 - WLI port running at 7011 domain name : stp_wli_domain and ALSB port running at 8011 domain name: stp_alsb_homo1 - folders- stp_wli_domain / stp_bea_alsb_homo
    Environmnet 2 - WLI port running at 7211 domain name : stp_wli_domain2 and ALSB port tunning at 8211 domain name : stp-alsb_homo2 - folders - stp_wli_domain2 / stp_bea-alsb_homo2
    Everything was working fine, but these days I had install new deployments on both environment and I got this error :
    java.lang.IllegalArgumentException: Registered more than one instance with the same objectName : stp_wli_domain:ServerRuntime=wli_wls01,Name=stp_wli_domain,Location=wli_wls01,Type=AIRuntime new:com.bea.wlai.management.AIRuntimeMBeanImpl@bcf22dc existing com.bea.wlai.management.AIRuntimeMBeanImpl@de02e6c
    The weird is : There is no same object name, as you can see, domains are different, folders are different and ports are diferrent, including multicast addresses.
    Have you guys seen this before ?
    I'm under pressure here, 'cause some projects had stopped to work.
    Please I would appreciate any help.
    Tks.
    Edson

    HI there, thanks for attention..
    See ...
    There's a lot of confusion with these env's .
    I did not built this, so... I'm cleaning my hands.... anyway... :)
    I must fix....
    Well basically if we have two env's, so we have different project each one right ?
    Ok, but I was told that if you have on the same network and same physical machine the name of AdminServer as "AdminServer" in all domains, so it goes with problems... I never heard about it... but is a good practice you put the names for example :
    WLI - WLIAdminServer
    ALSB - AlsbAdminServer
    WLI2 - WLiadminServer2
    ALSB2 - ALsbAdminServer2
    I would do it.. this way..
    But how it wasn't me...
    We got..
    WLI - WliAdminServer
    ALsb - AdminServer
    WLI2 - AdminServer
    ALsb2 - AdminServer
    Have you got it ?
    So... I was told that this could be a problem, almost all AdminServers with the same name... guess what ?Some Projects are back to work. but not at all.. only some.. so I 'm breathing better now... but I would like to know if you seen this before ?
    I would appreciate your help again.
    Unfortunately there's no detailed stack trace to track this
    Tks.

  • When I open more than one tab with ikls.ru web site - safari freeze immediately.

    I have a Lion OS and all updates. When I open more than one tab with ikls.ru web site - safari are freezing immediately.

    In safe mode the same problem in Safari. And I couldn't enable the guest account. You can see an attached pic. It's in Russian, but I think it's clear. I took a pic in a safe mode, but in normal mode it's the same.

  • How can I make more than one account with chat on clubwpt?

    I can't make more than one account with chat on clubwpt? i know several players that has made as many as 20 accounts with chat.I can make accounts but clubwpt will not give me chat,they must have my IP address ,because their response is " you r allowed one account with chat only." But as I have said several players have several accounts with chat. Can anyone help me? Are there any programs or plugins that can do this?Any help at all will be greatly appreciate.

    Open another iCloud account for the other user.

  • How can i use Itunes to update more than one IPad with more than one owner

    How can i use Itunes to update more than one IPad with more than one owner?  I own an IPad and my wife owns an IPad.  I want to use my system to update both IPads.  We have different Apple Accounts and different applications.  Is this possible?

    Of course, that is too easy.  I am such a bonehead.

  • Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how  indesign can do this action.

    Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how  indesign can do this action.

    set the wake-on lan on the main computer
    The laptop's too far away from the router to be connected by ethernet. It's all wifi.
    No separate server app on the laptop, it's all samba
    The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
    I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
    Last edited by saft (2010-03-18 20:38:08)

  • One Key FIgure in more than one column with different restrictions

    Hi,
      I am using a key figure in more than one column with different restrictions, but restriction in one column is affecting the result in other column. What shall i do to make it independent from one another??

    Hi Pravender Chauhan,
        If you want in Single column different value for different Rows based on same Key Figure, you can create Structure where you can define different logic for each row but using same key figure.
    If you want to use different Key figures then you should have to Restricted Key Figure and for any calculation you can use calculated Key figure.
    Assign points if Useful.
    Regards,
    Rajdeep.

  • HT1420 Can you have more than one device with a different Apple ID authourized to the same computer

    Can you have more than one device with a different Apple ID authourized to the same computer

    I think you are using the same Composition Class on both project. On the properties tab, you can change this number (e.g.: EDGE-1637270).

  • Can I install Adobe Creative Cloud in more than one computer with the individual plan?

    I don´t have clear about the diference between individual plan an teams. My questions are:
    Can I install Adobe Creative Cloud in more than one computer with the individual plan?
    The team plan means that I have to pay for US$70 for each computer that i want to install the creative cloud even if I am the only user?

    Hi heymarusia,
    Yes, you can install and activate Creative Cloud desktop applications on two computers, regardless of operating system, for the individual associated with the Creative Cloud membership. See the product license agreements page for more information.
    Regards,

  • How to display more than one column with for each

    Hi guys,
    how to display more than one column with for each like below?
    for each
    Item1
    Item2
    Item3
    Item4
    Item5
    Item6
    Item7
    Item8
    Item9
    Item10
    End for each
    for each          
    Item1     Item2     Item3
    Item4     Item5     Item6
    Item7     Item8     Item9
    Item10          
    End for each

    Take a look at this to see if the solution provided would work for you: https://blogs.oracle.com/xmlpublisher/entry/multi_column_row_woes
    Won't you have more than 10 records in your data file ? If you are going to have only 10 items then you may be able to use position() function to limit it to 3 each..
    Take a look at this: https://blogs.oracle.com/xmlpublisher/entry/turning_rows_into_columns
    Thanks,
    Bipuser

  • Can you install logic pro onto more than one computer with the same cd key?

    can you install logic pro onto more than one computer with the same cd key?

    Only a desktop and a laptop, both of which must be Macs you own.
    (60296)

  • HT1386 syncing more than one iPhone with iTunes

    Is there a way to set up different profiles to sync more than one iPhones with the same iTunes?  My wife doesn't want all my music, but she does want to share calanders.  Any ideas?

    http://support.apple.com/kb/HT1495

  • Re: More than one material with QM Notification

    Dear All,
    Is it possible to assign more than one material with QM notification.
    Regards,
    Vivek

    Thanks evrery body.
    I was having the same opinion. I have raised the same with SAP. Waiting for their response.
    Thanks again.
    Regards,
    Vivek

Maybe you are looking for