More than one program monitor

The program monitor shows the topmost video in the sequence. Videos that are stacked beneath it is not shown if you don't disable the top video track. So I would like to have an option to turn on another program monitor that would always show a video track of my choice. Actually, two extra program monitors would be even better.
I'm using a workaround - I have enabled a multicam monitor and set it to show a particular video track. It is helpful, but I can't play it in real time, it will only play by scrubbing, otherwise it is stuck on a frame and then shows the last frame when playback is stopped.
This would be an alternative to multicam editing, not having to edit in real-time, but having ability to see all the active video tracks.
I don't think this it's possible, but I wanted to make sure that there isn't a way to enable more than one program monitor? I'm using CS5.5

I haven't got it right... I did a test with three tracks, one nested sequence per track. I enable multicam for each one...and I only get picture from one track in the multicam.
If I make one nested sequence out of the main one (with all the video tracks) , I can see the tracks appear in the multicam - but I can't do any editing on the timeline, since it's only one track.
There's no gang option for the source monitor , but for the reference monitor. The reference shows the same picture as the program monitor.
Thanks anyway.

Similar Messages

Macbook Pro mid 2012 starting to lag when running more than one program.

Firstly mah specs :
Retina, Mid 2012
2.3 GHz Intel Core i7
8gb 1600 MHz DDR3
NVIDIA GeForce GT 650M / Intel HD 4000
OS X 10.8.4 (12E55)
So, i bought this macbook about a year and a month ago and since i bought it everything has run fine, it has always been fast and smooth, until around 2 months ago when it started getting a little laggy in handling more than one program being open. Before this i was able to run Photoshop, Cinema 4D, Second Life and Chrome all at once and recieved no speed decrease what so ever. So i figured that it must just have been a little clogged up maybe, honestly wasnt sure but tried clearing cache, tried freeing up memory with some of the mac memory management tools from the App Store and non of these worked so in the end i backed up what was important and wiped the HD and re installed the OS. Annoyingly i am still having problems, if i have Photoshop open and i am surfing chrome it lags on scrolling web pages or loading links. If i have Second Life open i seem to lag with more than 3 players around me quite badly, even if i put Second Life onto its lowest Graphic Settings i still lag where as before i had this issue i could run it on its highest Graphic Settings and recieve little to no lag what so ever. This happens for most programs that used to run smoothly, if i now open Cinema 4D and try anything else.....the system slows down.
I COULD take this to the apple store and genuis bar and ask them to have a look at it HOWEVER i am back at Uni in 2 weeks and i need the macbook for my studies as i am currently working on a summer project and need it for research, can any of you Mac Wonders out there suggest anything else for me to try. I have checked the HD and it says its not failing and is verified and found no issues with the partition.

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

To check that the ligical file is used more than one program.

HI all,
Is there any way to check that the one logical file are used more than one program.
Ex: one logical file is used in one program. I want to check that the same logical file are used in any other program.

Hi To all,
NO ideas...

Macbook freezing when more than one program runs

Hello all,
My Macbook is about a year and a half old. A few weeks ago, it crashed catastrophically, and the geniuses at my local store replaced the logic board.
Since getting it back, it's been crashing almost every time I try to run more than one program, such as itunes and safari. Ichat video or photobooth on their own cause it to freeze. The freezing process is gradual; first the program I'm looking at freezes, but I can navigate to other programs, but within a few minutes those freeze as well. During the freeze, the cursor moves (in beachball shape) but the screen is unresponsive and apple-option-escape has no effect; the only solution is to manually turn it off. It's also taking longer and longer to boot up. This happens when it's plugged in as well as on battery power. It's gotten to the point that I'm scared to do work on it, because I can't trust it to work long enough to save my data. What happened? Is this the result of my "fixed" logic board or something else? I am getting SO FRUSTRATED by how unreliable my macbook has become!!

To rule out any 3rd part apps/additions are causing the problem, try booting into Safe Mode...
http://docs.info.apple.com/article.html?artnum=107392
Have you replaced/changed Ram lately? ...if so, try reverting back to the old.
You could also ensure you've run your standard Maint. scripts (via Onyx, Cocktail etc...) and perhaps boot to the Install DVD to verify/repair the hard drive and its permissions. Booting to the Install DVD and running the Apple Hardware Test (hold 'D' on startup) could also reveal things.
Failing all that, try resetting the SMC and Pram...
http://docs.info.apple.com/article.html?artnum=303319
http://docs.info.apple.com/article.html?artnum=2238
To rule out a 'bad' hard drive you could either replace it physically or try booting from another Macbook via firewire...
http://docs.info.apple.com/article.html?artnum=58583
These are all a bunch of general procedures that the user can try to eliminate the issues - if nothing works, you'll need to make another trip to the genius bar.

Is it possible to equip a MBP with more than one external monitor

I am having one 17" monitor connected with my MBP right now. There'a a plan to buy new monitor and I don't wanna dispose my current one. Does anyone connect your laptop with more than one monitor?
I tried to search apple site about some cable that enable MBP to connect to more than one monitor, but haven't found any yet.

Yes, you can. But you have to use a third party hardware:
http://www.matrox.com/graphics/en/gxm/support/mac/home.php
Cheers
A.

How to start more than one program automatically? [RT]

Normally you can build an application and let it start automatically on the PXI system. You have to put the file into c:\ni-rt\startup\
But how to start more than one application in a pre-defined sequence? Depending on the situation there are several programs to be started that run simultaneously.
I searched for help in the Development Library and the Forums but I didn't find an answer.
Thank you very much for your helpin advance! Have a nice day!
Christoph

Hi Christoph,
You can use VI Server on the real-time target to launch other VIs dynamically. Your startup executable could be a simple application that uses VI Server to start other VIs that run in parallel in a pre-defined sequence.
Here's an example that does something similiar.
Note that when you build the VI into an application, you must include all the VIs that are called by VI Server as dynamic VIs in the application builder.
-Gerardo

Constantly get beach ball when I have more than one program open

I am get a slow machine and beach ball going when I have been using the computer for a while with a couple of programs open. I have 4MB of Ram and running 10.8.5.
Any ideas at what to look at first?
Thanks

When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

How can I create more than one program shortcuts in LabView Installer?

I have builded 3 executable files in LabView Application Builder. I want to create an installer (using the same application builder) that can copy the 3 files to the same destiny directory, install the Runtime Engine and create (in the same program group) 3 shortcuts for the executables. Is it possible with LabView Installer?

The Application Builder does not offer this option. It is really intended as a basic installer builder. However, you can use other software packages to enhance your isntaller. There are many third party installer builders that you can use to modify the msi file which the application builder create for you. You might want to check one of those out and use it for your application.
J.R. Allen

How to make applescript open more than one program at once?

Hi! I made the code below to use together with another 2 codes. One that mounts a samba share and another that runs rsync with specific parameters. The script below runs after rsync complete its task.
The 3 codes help me to test my HTML/CSS/PHP/Javascript code changes.
This code works but I have to repeat it to each browser/app I want and a 10 lines script becomes 40 lines (Google
Chrome, Firefox, Opera and Safari). Is there a more elegant way to do that? I've tried to use an array/list but didn't work.
if application "Safari" is running then
    tell application "Safari"
        activate
    end tell
    tell application "System Events"
        tell process "Safari"
            keystroke "r" using {command down}
        end tell
    end tell
end if

Nathan Greenstein already answered in AskDifferent: http://apple.stackexchange.com/questions/54595/applescript-array-of-applications /54598#54598
Quoting him:
set browsers to {"Google Chrome", "Firefox", "Opera", "Safari"}
repeat with browser in browsers
    if application browser is running then
        tell application browser
            activate
        end tell
        tell application "System Events"
            tell process browser
                keystroke "r" using {command down}
            end tell
        end tell
    end if
end repeat

Associating More Than One Program in Bridge CC?

In Bridge CC, I want to include Fireworks in the list of File Type Associations along with Photoshop as the default, so I can right click a jpg file in Bridge and have Photoshop and FireWorks (and maybe even ID and AI) as a choice.

Every app you select automatically becomes 'default' and will not allow another?
That is as designed, selecting the one you want makes it as the default to open when double click or use the menu command Open.
I don't have much experience with fireworks and had it not yet installed on my new machine because Fireworks is not being developed for CC but seems to get replaced with different versions of 'Edge', see also this blog about the future of Fireworks:
http://blogs.adobe.com/fireworks/2013/05/the-future-of-adobe-fireworks.html
However I tried to install the CS6 version of Fireworks using the Creative Cloud (Mac OSX 10.8.5). I first had to install and open Fireworks once but this did not bring Bridge CC able to open a jpeg in FWCS6.
I then quitted Bridge CC and started Bridge CS6 ( in CC still available as download in combination with PSCS6). This started with the request to add FW as start up script (which I allowed) and then showed the jpeg right mouse click menu with Fireworks CS6 in the top section with PS and Illustrator (at the bottom a whole list f other apps capable of open a jpeg.
Again quitted Bridge CS6 and restarted Bridge CC that now did also show FWCS6 in the top section of the Open With command menu for a jpeg.
Maybe this will help you also?

More than one programs using report generator at the same time

Hi,
I want to ask that how can I use Report Generator in two program at the same time.
As I am using Report Generator to log my data into excel, I find that if there are two
programs contain Report Generator, the program which ran first cannot find its
report.What can I do apart from alway open a new report?
Ryan

Ryan,
Could you elaborate on what you mean when you say that the program which ran first cannot find its report? Are you trying to modify the same report simultaneously with these different apps?
Regards,
Jared Boothe
Staff Hardware Engineer
National Instruments

More than one external display possible?

Hey all,
I was wondering if there was a way of running more than one external monitor from my Macbook. I use the Macbook in my home recording studio for Logic Pro 8 but the screen is quite small to work with. I would love to work with dual external monitors so i do not have to look at the macbook screen at all.
I'm guess this is not possible considering the Macbook only has one mini-DVI out ??
Thanks for all your time reading this,
Steve.
Message was edited by: skeletal_wreck

I feel your pain Da BomB!
You will have to settle for what I have done - have a dual screen set up with one screen being an external monitor and the other being your little Macbook screen. I have tried to make the most of this compromise by just going for the biggest external TFT that I found affordable on ebay (20").
Its a petty no monitor manufacturer came up with the idea of 'daisy chaining' screens!
Steve.

Can we use same program ID for more than one RFC scenarios

Hi experts,
            I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
data: iquote type standard table of ZIQMD initial size 0,
      IPRODUCT type standard table of ZPMS initial size 0,
      wa_quote type ZIQMD,
      wa_PRODUCT type ZPMS.
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
TABLES
    I_QUOTE       = iquote          .
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
'ID4'
TABLES
    I_QUOTE       = iquote          .
COMMIT WORK.
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
TABLES
    IPRODUCT       = IPRODUCT          .
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
'ID4'
TABLES
    IPRODUCT       = IPRODUCT          .
    COMMIT WORK.
when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER' , but iam not getting data for 'Z_CBT_RFC_PRODUCTMASTER' interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
              Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
Thanks in advance.
Thanks & Regards,
Poorna.

Just tried this and I can confirm that my earlier understanding was correct!
One of my colleagues confused me out and the conclusion is,
1. You need a separate TCP IP Connection for every interface with a Unique program ID.
Regards
Bhavesh

HT5019 MacPro laptop display and 2 external monitors (three displays). Can I have more than one application displayed at a time?

I would like to have my MacPro laptop display and 2 external monitors (three displays). Question, how can I have more than one application displayed at a time? IE: I would like email on one monitor, Finder on my laptop, and iTunes on the other. Possible?
With extended desktop, it appears that I can only have one application presenting at a time. Sort of defeats the purpose of having multiple displays.
I am using the HDMI and the mini HDMI connectors.

I would like to have my MacPro laptop display and 2 external monitors (three displays). Question, how can I have more than one application displayed at a time? IE: I would like email on one monitor, Finder on my laptop, and iTunes on the other. Possible?
With extended desktop, it appears that I can only have one application presenting at a time. Sort of defeats the purpose of having multiple displays.
I am using the HDMI and the mini HDMI connectors.

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards

More than one program monitor

Similar Messages

Maybe you are looking for