More than one programs using report generator at the same time

Hi,
I want to ask that how can I use Report Generator in two program at the same time.
As I am using Report Generator to log my data into excel, I find that if there are two
programs contain Report Generator, the program which ran first cannot find its
report.What can I do apart from alway open a new report?
Ryan

Ryan,
Could you elaborate on what you mean when you say that the program which ran first cannot find its report? Are you trying to modify the same report simultaneously with these different apps?
Regards,
Jared Boothe
Staff Hardware Engineer
National Instruments

Similar Messages

Can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0

can I pair and use more than one set of bluetooth speakers at the same time on my ipod touch 4.0 or Iphone 4s or Ipad 2?

You can only connect to one device at a time using Bluetooth, See article below for more information.
http://support.apple.com/kb/ht1664
While your iOS device can maintain multiple pairing records, it can only connect to one headset or hands-free device at a time. This prevents your iOS device from sending your data to the wrong Bluetooth accessory.

Can I have more than one version of adobe reader at the same time?

can I have more than one version of adobe reader at the same time?

If I may add a qualification: on a device running full Windows 8, you may have both Adobe Reader Touch and Adobe Reader (normal desktop edition). This does not apply to the primitive devices which cannot run desktop apps (running "Windows RT"), and while I may be wrong, I believe that the Surface 2 is such a device.

Can I configure my Bluetooth connections to use more than one wireless audio output device at the same time?

I am trying to get my Macbook Pro (OS X 10.8.5) Bluetooth system to recognize 2 different wireless speakers at the same time. both are currently paired with mu computer and can be chosen independently and work nicely.

Version 10.0.3 is the latest version of iMovie. iMove '11 (as in 2011) is version 9.
iMovie saves your Projects automatically. So you can just choose to create a new Project. Your existing Projects will remain available for you to go back to whenever you like.
You can have as many Projects as you like. You don't need ot finish one before you begin another.
Post back if you have specific questions.
Matt

How to control more than one instrument via different interfaces at the same time

Hi, I am new to Labview. I am working in a project where I have to make a Automated testing tool . So, here is the set up - I have a Chip on a board to which there are several instruments connected namely Agilent power supply, Agilent pattern generator, oscilloscope,Dmm and Thermotron. All these instruments will be connected to the host computer via ethernet, GPIB or RS232. I have to write a program on Labview where the program should be able to communicate with these instruments at the same time and show the ouput on display unit . I have to run the program once, should be able to view the ouputs. So, Is it possible to write such program in Labview??. I have downloaded few instuments drivers. Is it possible to combine those intrument drivers and construct a new VI which would be able to control all this ?? Will it be easier to program this on Labview or I should go for Labwindows/CVI ??.
Please mention some useful sites or tips (if u know) for writing program.
Thanks in advance
shasanka

Hi Shasanka,
ofcourse it's possible to control more than one instrument at a time.
You should use the VISA routines to access all your devices. Every device get it's 'address' as 'VISA resource name'. This resource name contains information on the used bussystem and the (internal) device address (i.e. GPIB devices have an address number).
So I suggest to read the manual and to look at the examples that come with LabView!
And (from your question) it seems you should take the 3 or 6 hour seminar as well! (Look at www.ni.com -> academics.)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Can more than one child be visible/open at the same time in Accordion navigator container?

I have a situation where I need a layout like Accordion
container but with more than one child panel visible at the same
time. Is it possible with Accordion container? If not, any
suggestions to implement this layout?

Ryan,
Could you elaborate on what you mean when you say that the program which ran first cannot find its report? Are you trying to modify the same report simultaneously with these different apps?
Regards,
Jared Boothe
Staff Hardware Engineer
National Instruments

How do I log into more than one email account and view at the same time?

In the past, I could log in to hotmail.com and open and view more than one email account in firefox. I must have closed something, so now I can't do that?
HELP???

Hi Shasanka,
ofcourse it's possible to control more than one instrument at a time.
You should use the VISA routines to access all your devices. Every device get it's 'address' as 'VISA resource name'. This resource name contains information on the used bussystem and the (internal) device address (i.e. GPIB devices have an address number).
So I suggest to read the manual and to look at the examples that come with LabView!
And (from your question) it seems you should take the 3 or 6 hour seminar as well! (Look at www.ni.com -> academics.)
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Can't connect more than one PC to my network at the same time.

When trying to connect a second wireless laptop to my network, the one already connected gets disconnected. I'm using a WRT110 router(cable connection) that I bought 5 days ago, and two laptops with Win Vista. I don't have any PC wired connected.

First thing which you need to do is upgrade the firmware of your Router. Go to website linksysbycisco.com/downloads... ......insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop..
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Once you configure all the settings on your router... here are some wireless settings which you can set on your Router and i think this might make your both the wireless computers go Online...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Is it possible to have more than one event/project in Imovie at the same time?

Let me see if I can shorten this. I am working on a project for a review. It's going to take quite awhile and I'm half way through it. However, I need to work on another project, one thats short and I can dish out fairly quickly. My problem is that I cannot start it without discarding my current project. Which I cannot do because I will lose a weeks worth of data. And I cannot save it because it will combine all the clips and I would have to re-split them (half a days progress).
So in short, is there a way to save my project as-is? Or possible create a new event and start a new project while maintaining my current work? Thank you for your help!

Version 10.0.3 is the latest version of iMovie. iMove '11 (as in 2011) is version 9.
iMovie saves your Projects automatically. So you can just choose to create a new Project. Your existing Projects will remain available for you to go back to whenever you like.
You can have as many Projects as you like. You don't need ot finish one before you begin another.
Post back if you have specific questions.
Matt

Can more than one laptop use a wireless network at a time?

Hi...quick question and this may be a stupid one .. but a few months ago my uncle was living with us and had a laptop which had a wireless Internet connection. I had already had my Ibook set up and was using a wireless Internet connection. When he turned on his mine stopped working? Why was that happening? Also ... my dad is buying my mom a laptop for Xmas and I'm sure that it will have a wireless connection as well? I'm hoping that same thing will not happen again. Why would the wireless router only read one laptop in the same house? Aren't wireless routers suppose to read more than one computer? I just don't want my MAC to be unable to use the Internet once another laptop is in our house. Does anyone have any suggestions? Thanks a ton!
IBook Mac OS X (10.4.8)
IBook Mac OS X (10.4.8)

Karen, welcome to the discussions.
Using a wireless router will enable you to connect upwards of 50 computers all at the same time and simultaniously.
Take care to read the set up procedure for the particular Wireless Router you are using for your Network.
There are several different ways to confiqure a wireless Network.
AS long as all of the computers you have, do in fact have wireless cards in them you shouldn't have a problem.
There is a difference in the set up for PC and a Mac.
There is also a difference in Wireless Routers and there capabilitys, some are for older wireless 802.11b compliant systems. Whereas the newer Routers or Base stations are for both older 802.11b and the newer 802.11g connections.
They will say 802.11b/g or something close.
Most will require you connect your Internet Service Providers Modem to the WAN Port of your choice of Wireless Router. Like I said follow the directions.
Good Luck
Don

How do I set up the app FindMyiPhone on more than one phone when all phones have the same Apple ID?

I have two iPhones and I want to set up FindMyiPhone on both phones but we both have the same apple acct. I want to be able to track my teenage son's whereabouts and this would be a good way. When I log into iCloud, only my iPhone shows up. His used to but after I did a weekly restart on my iPhone I lost his. Before, mine wasn't showing up, only his. Now mine show's up but his doesn't.

You could look at using a template. Create your master template, create editable and non-editable regions, then use this template create all the child pages. When you need to make a change to the menu, make it in the template and the changes will flow down to all the pages created from the template.
Using DW Templates:
http://www.adobe.com/devnet/dreamweaver/templates.html
http://www.adobe.com/devnet/dreamweaver/articles/dw_templates.html
The other option would be to create the Navigation item as a server side include...
More about this:
http://kb2.adobe.com/cps/143/tn_14380.html
http://www.entheosweb.com/website_design/server_side_includes.asp
Difference between using a template and server side includes.
When you make a change to a template, you need to re-upload all the pages created from the template.
Using a SSI, you make the change in the ssi file, upload it and all pages are automatically updated.
Nadia
Adobe® Community Expert : Dreamweaver
http://www.perrelink.com.au
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/
http://twitter.com/nadiap

HT2731 Can we have more than one Apple ID for iTunes on the same computer

We have a family computer. On this computer we have an iTunes account. My son would like to set up his own iTunes account on the same computer. Can this be done if he creates his own Apple ID and can we use the same credit card # to set up the account?

Welcome to the Apple Support Communities
Of course. Just create a new user account for him, so he can have his content on another user without messing your data

Can more than one SAP ERP system connect to the same PI system?

HI Experts
Well i am new to SAP Process Integration 7.1 and i have managed to point PI system to SAP DEV ERP , but i also want to add these other 2 systems SAP QAS ERP and SAP PRD ERP Using RFC Adapter. So is it possible to integrate SAP QAS and SAP PRD ERP into the same PI system that is pointing to SAP DEV ERP. If possible what are the configuration steps that i should follow?.
This project implementation is based on SAP MDM 7.1/ SAP PI 7.1/ ECC EHP6.

Hi Farai,
Technically this is possible. But don't forget that all systems are then using the same ESR and ID. So changes on PI are also influencing ERP QAS and PRD. I don't recommend this. At least you should have 2 stages for PI: Development and QAS/PRD.
You just need to maintain 2 connections in ERP: ESR connection and RFC connection. For using the interfaces in PI for all 3 stages you need to create 3 different configurations in Integration Builder of PI.
Best Regards
Harald

How do i invite more than one invitee on different days for the same event

Hi all,
I basically want to create one event that occurs on several months with a group. I know how to invite lots of people on one day but not several days.
Please advise.
Thanks

hi Abbey!
just checking. have you seen these user tips and KB docs yet?
Natalie Beresford: multiple iPod/iTunes installations
How to use multiple iPods with one computer
iTunes: How to share music between different accounts on a single computer
keep us posted.
love, b

Every time i connect my car charger for ipad it says not charging and i tried more than one charger but they all say the same thing is there something wrong with my ipad?

My ipad doesnt want to charge in the car charger

What are the electrical specs of the car charger? The Apple wall charger is rated at 5V and 2A. If the car charger does not output 2A @5V, you'll get the not charging message. However, it will still charge, but very slowly.
 Cheers, Tom

More than one programs using report generator at the same time

Similar Messages

Maybe you are looking for