More than one solution active ?
Hello Everyone,
I have some enhancements to Opportunity, Accounts and Activity. These enhancements are part of different solutions. That is, Opportunity Extensions are part of one solution, Accounts extensions are part of another and activity in another. When I log-in to the UI, I only see extensions related the last activated solution all other extensions from other solutions are not visible. Can only one solution be active at a time or is there a way I can make all enhancements made in all solutions visible.
Regards,
Srikanth
Hello Srikantha,
Please have a look at this discussion: http://scn.sap.com/thread/3581543
It explains a little bit how and why.
HTH,
Horst
Similar Messages
-
An operation has more than one setup activity-error message
Hi All,
I have a queue which is failing and giving error message "An operation has more than one setup activity".
I have debugged it but of no use.
In SAP R3 planned order data is created and is being sent to APO system through a CIF interface in queue.
In APO system,planned order data is integrated to process order,during this they are getting the subject mentioned error.
Kindly help me how to rectify this error.
Please help...Thanks in advance.Hi,
Back again...hopefully below should solve your issue.
Check if any of the co-product (of the main assembly) has GR processing time. Are there any phantom component in the BOM, if yes, please check the co-products in phantom assembly as well.
Any co-products /phantom assembly should be assigned to APO related Produce phase.
Otherwise, you can remove the GR processing time for co-products (make it zero) and sync the master data and then try.
This should solve the issue.
Let know if this helps.
Regards,
NR -
More than one Solution Manager
Hi,
We have 3 data centres around the world and each have a number of SAP systems, ABAP, JAVA and ABAP+Java. At present we have one central Solution Manager that is configured primarily for ASAP, change management etc and not really configured for CEN or RCA.
So my question is, has anyone setup more than one Solution Manager when they have multiple data centres around the world or is everyone just using a central Solution Manager?
Any advise would be greatly appreciated.
Regards
BrianThank you for your reply. Our Central Solution Manager is already 4p/8c with 20Gb on Windows Server 2003 and when we connect all our SAP instances, some 120 of them then the Solman basically stops. So I am curious, very eager to find out if anyone has setup more than one Solman to handle large numbers of SAP instances and handle geographic separation of SAP instances.
But thanks for your reply.
Brian -
Using more than one Solution Manager for different usages
Dear all,
we are using a solution manager system with >100 connected systems.
The system should primarily be used as service desk system, but is also used for BC issues (e.g. MOPZ,...) at the moment.
We have to implement a central monitoring system (CEN) using the CCMS infrastructure.
It is recommended to use a seperate system for this issue, because of high performance requirement and the requirement to have the newest support packages for CEN+MOPZ.
Because of that recommendation we are thinking about installation of a second solution manager system which should handle all BC and Monitoring (CEN+SolutionManager-Monitoring) issues.
Do you have any experience with such a landscape? Are there known problems respectively is such a landscape possible/workable? How should the systems be connected? ( client system<=>solman / solman<=>solman )
I regret that I could not find any official landscape recommendations from SAP for big landscapes (VAR environment)?
If you know any applicable documents, please let me know.
Thank you for your help.
Best regards,
SaschaHi Sascha
Technically Solution Manager is being billed as the Central system for everything Service Desk, MOPZ and CCMS - one central location for all scenarios
One of the reasons for this is lifecycle management -- monitoring or EWA scenario finds a problem, service desk raises the issue, charm or mopz implements the solution and it is tested and distributed and the whole lifecycle is documented one system. Indeed I am aware of no functionality to integrate scenarios between Solution Manager systems - each Solution Manager system in your proposal will be standalone for each scenario
I can't provide guarantees because SAP recommend 1 Solman PRD only, but it might be possible to use another PRD Solution Manager system (or client) for scenarios that not already setup in the existing Solution Manager system - this certainly is the most possible way to have 2 PRD Solution Manager systems (or clients) running in parallel.
The key thing to be aware of is RFC conflicts - as each scenario usually has its own RFC this might be avoided - however
do watch out for situations where scenarios share RFCs or you if find RFCs existing with the same name OR client and SID in any systems in the following landscape
Landscape 1 - Satellite System 1 to Solman System 1 Service Desk, MOPZ
Landscape 2 - Satellite System 1 to Solman System 2 CCMS, EWA
Best wishes
Stuart -
Can you have more than one NIC active on CISCO NGS?
We have a CISCO NAC Guest server with the latest software on it. The trouble is that it only has one active interface eth0 so we can only apply one IP address even though it is shipped with four NIC's in total. I would like to know if it is possible to have any of the other NIC's active so that we can apply different IP addresses to them. The reason for this is so there is a seperate interface connected to a different VLAN for management and monitoring purposes.
Yes.
One computer using multiple iTunes Store authorizations -
Can I have more than one device active on my iTunes account?
ON my iTunes account I currently have two iPhones and one iPod touch. Everything worked fine until a month ago when suddenly iMessage started sending incorrectly between the iPhones. We don't access iMessage on the iPod. It created a message thread on my phone with my own name, one for the email associated with the iTunes account as well as the normal thread for my husband's phone. All of the iMessages appear in both of our phones as 'sent' or blue messages. Help!
This happens when you are using the same Apple ID for iMessage on both phones. To correct this, use different Apple IDs on each device. (You can still share the same ID for purchasing in Settings>Store if you wish; the ID for iMessage doesn't need to be the same as the one used for purchasing.) On the phone that will change, go to Settings>Messages>Receive At, tap the Apple ID at the top, sign out, then sign back in using the different ID.
-
Is it possible to connect a DEV System to more than one SAP Solution Manage
Hello,
My system DEV is already connected to a first SAP Solution Manager, I would also like to reconnect the same system so that it communicates and will be monitored by a second SolMan.
Is it possible to do so and the do the operation involve any risks ?
Thanks for your help
Regards
BenHello,
This is possible in many scenarios. Often this is done to distribute load, for example on Solution Manager will do the Service Desk Function, one may do ChaRM, one may be doing Monitoring & Reporting, one may be doing Diagnostics.
In these cases a managed ssytem can be connected to many Solution Manager systems.
However as Mateus has pointed out, you cannot connect one managed to two Solution Managers and do SMD on both Solution
Manager systems, but you can have more than one Solution Manager doing Diagnostics.
Even in the case of EWA, while you can connect a Managed system to multiple Solution Manager systems and have then generate a report, one of the Solution Manager systems must be defined as the Master.
So the specific scenario may place some restrictions on connecting a managed system to more than one Solution Manager,
but for most instances it can be done.
Regards,
Paul -
Can we have more than one Transaction type in Interaction Center in 7.0
We are currently upgrading from CRM 5.0 to 7.0. We have an Interaction Center that has about 30 transaction types defined in the action boxes that we want to use in the CRM Web UI in 7.0. Is it possible to use more than one Business Activity (Sales) transaction in the WebUI? I see that you can configure them for follow-ups but when I view the Business transaction profile configuration , it only allows me to apply 1 transaction , say 0010 or ZC01. When I launch the Web UI, I see the transaction say ZC01 in the upper left corner. We would like to be able to launch the Web UI and the ability to create activities for more than 1 transaction type. Is this possible ?
Can we pull employee from one trusted system and in the same way can we pull some contractors from other trusted system simultaniously?
yes you can. In the schedule task you'll have to put your query in such a way that it brings both data.
Can both trusted systems can be active at the same time pulling two types of users from two trusted systems?
You have to run both recon in sequential manner so that it can pull correct data for OIM
Some where i read in doc that only one target system can be designated as trusted system if it as has more than one the recons will not work properly...
I don't think that it results into issue. But we have to see the sequence mainly. Otherwise it will results into wrong data -
User status with more than one status
Hello to every one,
In my project i need to configure the user stats in such a way that i can have more than one status active at same time. For example DIR P1 now in this DIR means directores approved ad P1 means period 1. Now may be after 1 month it will be BOD P2 which means bod approved and period 2 is going on.
I am trying in system but at one time i can have only 1 user status and second one is overwriting the first one. Kindly suggest how we can achieve the scenerio and is is possible in standard user status.
Regards
Abhishek SinhaDear ahmed and virendra,
thaks a lot for your helpf. Its solved my problem. Thank you both very much.
Regards
Abhishek Sinha -
This is not correct solution. I have fresh/new copy of Windows 7 64 bit and I have the same problem.
Autorun only shows the Apple Bonjour service. It started when try to sync more than one iphone over WiFi. I have two iphones and an iPad. I turned off syncing over WiFi and still has high CPU utilization. One of the CPU's is pegged at 100%. It is the AppleMobileDeviceService.exe process.For the record, I then followed the suggestion of MarcDCMB in https://discussions.apple.com/thread/4291206 of just manually restarting the Apple Mobile Device service in Windows services.msc once each time after starting iTunes and the service no longer hogs CPU after that service restart. Not too painful as a work-around, and apparently an effective one, but clearly not a solution to the problem. Again, as above, all the other solutions didn't work for me and I have no conflicting software as far as I can tell. So you'd have to say this Apple's problem.
Also FTR, I am still on the 5.2.0.6 version of the Apple Mobile Device Support MSI and I don't know if that is relevant to this work-around working but my sense is that it is NOT relevant. I'll report back on this thread if I re-upgrade and the problem returns in spite of the service-restart approach. -
How can you create an activity as subsequent act. of more than one activity
Hi.
I want to create an activity as subsequent activity of more than one activity.
I am using FM CRMXIF_ORDER_SAVE, but if I write data structure CRMXIF_DOC_FLOW with more than one item the system shows the error CRM_COPY 010 More than one predecessor was entered for data transfer.
However I have customized multiple relationship allowed, and if I do multiples links in transaction crmd_order it works all right.
Only it doesn't work with FM CRMXIF_ORDER_SAVE. I need create activities with FM because they are interface R/3. What FM can I use to create multiple subsequent activities?
Thanks and best Regards
Sorry for my english.Hi,
I have got some activities creates in the system. (e.g. Act. 1, Act. 2, Act. 3 and Act. 4). With the FM CRMXIF_ORDER_SAVE filled the structure CRMXIF_DOC_FLOW you can create subsequence activity of one of them (e.g. Act. X.1). I need create the same activity (Act X.1) from another activity, (e.g. Act. 2). I know to do this in transaction CRMD_ORDER by link tab. But I don't know how to do this using FM or BADI or another thing.
Act. 1 Act. 2 Act. 3 Act. 4
.....Act. X.1
Thanks in advance.
Edited by: Ana Isabel París on Jul 7, 2008 2:42 PM -
Short dump ( PNP LDB )More than one radio button is active
Hello Guys!!!
I am working on HR report and Im using <b>PNP LDB</b> . on output when I select Current month and select personal area single values and hit execute button . Its giving me short dump <b>More than one radio button is active </b> . Why is that any body can help me ?
Cheers
UsmanAlso check on AT SELECTION-SCREEN OUTPUT. You`re not selecting any of them too...
Checkout this code ..
I declare PNP in attributes and AT SELECTION-SCREEN OUTPUT.
PNPTIMR5 = ' '.
PNPTIMR3 = 'X'. ( Just comment it or give error message )
its giving short dump ,if I try to do the same thing you describe in your post !
Hope thisll help you
Thanks
Saquib -
Activating more than one iphone
How many iphones can you activate on itunes. If you can activate more than one, will the songs and applications you download into itunes be able to be put on more than one phone or just one.
I don't believe there is a limit for the number of iPhones that can be activated with iTunes on a single computer, and I don't believe there is a limit for the number of iPods and/or iPhones that can be synced with the same iTunes library.
There is a 5 computer limit for the number of computers that can be authorized with the same iTunes account, but not for the number of iPods and/or iPhone that can be synced with the same iTunes library. -
ORA-01427: single-row subquery returns more than one row -- no solution
Hello to all:
I have to tables:
Table a anwender (Email,Dept). --> all fields are filled
Table b dingo (Name,email,dept) --> all fields are filled
I now want to update the table a with the data from table b:
update anwender a set a.abteilung = ( select distinct b.abteilung from dingo b where b.email = a.email);
Then I got the error: ORA-01427: single-row subquery returns more than one row
Every dept is about 100x in the database, so it is clear that i got more than one row back. But how can I update the table now?Okay, I got several duplicates, and I deletet a lot of data in my database.
Now I want to remove all entries with more than one departments per mail adresses.
a
select email,count(abteilung) from dingo group by email having count(abteilung)>1 order by count(abteilung)
shows me all the fake mailadresses.
But a
delete from dingo where email in (select email,count(abteilung) from dingo group by email having count(abteilung)>1 order by count(abteilung) );
gives me a
SQL Error: ORA-00907: missing right parenthesis
I´m very confused now ...
Oops, now I got the solution:
delete from dingo where email in (select email from (select email,count(abteilung) from dingo group by email having count(abteilung)>1 )) ;
Edited by: user8309218 on Dec 18, 2009 6:24 AM -
Question: As I send an email, the mail activity indicator is showing that more than one email is being sent! Last time it was 5 even though I was only sending one and there were no other emails in the out box! What's going on here I ponder?
Several time in the past, similar question was asked in the forum, for example check the link and reference OSS notes mentioned in it. You can also search the forum, if you need further info on this topic.
http://scn.sap.com/thread/3230103
Regards,
Maybe you are looking for
-
Download speed after mountain lion
Ever since upgrading to Mountain Lion, my internet download speed has decreased ~80%. The speed to my router is over 10MB (and that's what I was at prior to Mountain Lion), but now it's less than 3MB on my MacBook Pro, which I connect to wirelessly.
-
Hi all, i have a model with two fact tables, both of them containing these columns: - some measures - foreign keys for dimensional tables - column year - column month I have to build a model with both of these two tables, including a unique time dime
-
No Music in Exporting a self playing slideshow to Quicktime.
I exported a self playing slideshow to QuickTime in order to burn DVD inToast. I selected the Include Audio button but when I played back the file the music did not play. I noticed the export made two files - The video files and a seperate audio file
-
Coherence:Using the POF API to Serialize Objects PortableObject
About the POF Serialize Config: 如果是Implementing the PortableObject Interface, coherence-pof-config文件user-type怎样配置? <?xml version='1.0'?> <pof-config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://xmlns.oracle.com/coherence/coh
-
Audio Problems with Air 2.0.2 in Linux
We're seeing an issue which appears to be a bug in the Air 2.0.2 runtime for Linux. When a video file plays [via VideoDisplay] the audio is heard but as soon as the video is finished, audio cuts out for the entire application. We ran strace() and n