More than one storage bin for a Material
if a Material is maintained in more than one bin,what stock placement strategy will be be better,normally the client uses Fixed bin but some materials are placed in more than one bin.
Regards,
Tafanza
Hi
If u r using chemical sort of thing, fixed bin will be better.
Or otherwise next empty bin will do.
Regards,
Raman
Similar Messages
-
How to have more than one free good for a material ?
Hi everyone,
we have this requirement from the user where he wants give more than one free good for a material.
As far as i know we can configure only one free good for a material in standard SAP.
if have any idea about how to achieve this please guide me how to configure the same in SAP.
thank you in advanceHi
Check my two links where I have explained this.
Free goods using Sale order BOM methodology
Different business scenarios and Sales BOM techniques for header and item level stock and prices
Thank$ -
Creating more than one serial number for a material upon Goods Receipt
I am trying to configure the system to create more than one serial number automatically for a material and have the equipment record created at the same time with the same number as the serial number. For example using MB1C, receiving a material for a quantity of 2, the Maintain Serial number pop up box appears, selecting the 'Create serial number automatically' , I receive an error message ' Number of numbers to be assigned must be 1
Message no. NR030
Can someone help me with this issue.I have tried MIGO and get the same error. The Plant data/stor 2. tab of the material master for this particular material is set as follows
Serial no. profile NS01 SerLevel 1 Keep equipment number and serial number synchronous.
Would there be configuration missing? -
More than one class type for a Material
Hi All,
We have a requirement of using a Material for Variant configuration. So we need to assign Class type 300 for that Material.
But that Material is Batch managed. So Class type 023 is already assigned. I am unable to extend the Material to Class type 300.
I searched forum, it is given that, it is possible to maintain different Class types for a Material.
But I tried, I couldn't do that.
Please help me to extend a Material to another Class type.
Regards,
Raja DuraiHi Raja,
You can maintain different classes for same material.
Go to material master and go to Classification view. Go to Extras->Change class type (F7)
Now you can add a class of different class type.
Please see below snapshots for more details.
Thanks,
Dattatreya N R -
More than one insp. types for a material
Dear all
If two insection types are assigned for a material e.g, for a raw material insp. types 1 and 5 have been assigned.then please guide me from where this material will pick characteristic separately for each.
Following steps i have taken already.
i-maintained material specs for insp. type 1 and insp. plan for insp. type 05.so for type 1 it will pich characterstics from material specs and for insp. type 05,it 'll pick from insp. plan.is it right way.or any better suggestion somonecan give.Simpy use QP01 like you would normally. If you want to include the material number and plant on the first screen you can. In the header, select the appropriate task list usage for the inspection type.
You should review in SPRO which usages are assigned to which inspection types. You may need to change or modify them from what SAP delivers.
From 6.0
Task list
Usage Short text Assigned insp. types
1 Production
2 Engineering/design
3 Universal 04, 89
4 Plant maintenance
5 Goods receipt 01, 05, 07, 08
51 Goods receipt model
53 GR external process.
6 Goods issue 02, 10, 11,12
7 Returns 06
9 Material check 09, 15, 16, 17
99 Production Rework
You can change these in SPRO under "Maintain inspection types". You can also add and create your own usages under the "General" section of "Quality Planning" in SPRO.
Craig -
How can I maintain more than one contact person for a supplier
Hi
As per our business requirement , How can I maintain more than one contact person for a single supplier in SRM?
How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier.
we are in SRM 7, and currently we are creating contact person throug customised BDC.
please advice.
Thanks & Regards
NITIN
Edited by: nitinkk on Sep 9, 2011 10:22 AMDear Yaniv,
Thanks for your information,
I am able to create users But my problem is How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier ? Is there any kind of maping is available for the user/ contact person to the supplier no.??
Thanks & Regard
NITIN -
How can I create more than one printer queue for a printer
I would like to have more than one "default" setting for my printer. This is so I can use a 3rd party print utility (fingerprint) to print to a non-airprint printer from my ipad. The utility prints using the default configuration. I don't need to get fancy here. Just "draft B&W' , "normal", and "Color best quality". If I need something else, I can always email the document to my MacBook. The utility has something about a virtual printer, but all I could find about that is that it is used for PDF printing and maybe a workflow.
My technology level: Used to be a programmer, after a decade of retirement, I can't even program an applescript today.Take a look at this add-on.
https://addons.mozilla.org/en-US/thunderbird/addon/signature-switch/ -
EJB3 - More than one remote interface for Session Bean?
Hi,
Is it possible in EJB3 to have more than one remote interface for a SessionBean?
I have seen it posetd on here that it is possible but never been able to find any other information.
Using JBoss as my App Server, I have deployed an App, where a SessionBean is defined as implementing 2 interfaces, both of which are annotated using @remote.
However when I examine the JBoss JMX Console, Global JNDI Namespace only one remote interface is listed, and indeed it is the first one defined in the SessionBean.
Considering I use a String similar to (MyApp/MyBean/remote) to do the JNDI lookup, this would indicate that it is not possible to have more than one remote interface.
1. Is this a JBoss specific limitation?
2. Is there another way of performing the JNDI lookup?
Thanks,
Alan.Hi,
Thanks for prompt response! I tried the suggestion in my application, and the output from JBoss JMX Console was
+- XXXBean (class: org.jnp.interfaces.NamingContext)
| | +- remote (proxy: $Proxy291 implements No ClassLoaders found for: xxx.xxx.xxx.xxx.xxx.Remote1 (no security manager: RMI class loader disabled))Again only displaying the remote interface that is first in the @remote ({ Remote1.class , Remote2.class}) list. This would lead me to believe that JBoss does not support this.
Can anyone confirm this?
Alan. -
More than one Planning plant for a maintenance plant.?
hi Friends, can we have more than one Planning plant for a maintenance plant.Is there any advantage or disadvantage of this condition.?
Hi,
You can have Maintenance Planning Plant & Maintenance Plant in any of the follwing ratios, i.e., 1:1 / 1:n / n:1. Actually in Maintenance, there can be electrical & mechanical maintenance.
In the case of 1:1 relation, all the maintenance activities (Electrical & Mechanical) will be planned by single Maintenance Planning Plant for single Maintenance Plant.
In case of 1:n, single maintenance planning plant will do the plaaning of maintenance activities for all the maintenance plants.
In case of n:1, electrical activity will be planned by one Maintenance planning plant & mechanical activities by another planning plant for a single Maintenance plant.
Defining Maintenance planning plant & maintenance plant in different relations will help us in generating different kind of reports.
I am looking forward your reply.
Regards,
Maheswaran. -
More than one entity found for a single-object find method
Hi everyone...
I have this error when my webservice is running..I don't know what it means and what would be the best solution..
<pns:message>More than one entity found for a single-object find method.</pns:message>
it throws an Exception..
Thanks!= More than one row found in a DB with the "unique" key supplied...
Your method is returning an object where it should return a collection ?
Enjoy -
More than one outbound interface for the webservice scenario
Hi Experts,
Is it possible to have more than one outbound interface for the Webservice synchronous scenario? I have tried it , but I couldn't implement it.
I would like to have your suggestions.
Regards
SaraHey,
Creation of a wsdl file
/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
N:1 seemz he was refering to multimapping scenario.
<b>Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*</b> -
How to display more than one column with for each
Hi guys,
how to display more than one column with for each like below?
for each
Item1
Item2
Item3
Item4
Item5
Item6
Item7
Item8
Item9
Item10
End for each
for each
Item1 Item2 Item3
Item4 Item5 Item6
Item7 Item8 Item9
Item10
End for eachTake a look at this to see if the solution provided would work for you: https://blogs.oracle.com/xmlpublisher/entry/multi_column_row_woes
Won't you have more than 10 records in your data file ? If you are going to have only 10 items then you may be able to use position() function to limit it to 3 each..
Take a look at this: https://blogs.oracle.com/xmlpublisher/entry/turning_rows_into_columns
Thanks,
Bipuser -
Can we maintain more than one shipping condition for a customer
Hi,
Can we maintain more than one shipping condition for a customerHi Raj,
Yes you can maintain the different shipping condition for one customer but for this that SOLD To Party should have different SHIP to Party also as we mainatin the shipping condition for Ship for the party. In other words you can maintain as many shipping condition equal to the number of ship to party.
Other way is if that customer is in different sales area then you can maintain the different shipping conditions for that customer in all the different sales area.
Hope I could make myself clear enough to help you.
Please reward if its useful.
Regards,
Abhi. -
Enter more than one personnel number for the same confirmation in CO11N
More than one labor working on Machine work center simultaneously.
So that during production orders confirmation in CO11N we need to enter more than one personnel number for the same confirmation but in CO11N the system allow me to enter only one personnel number.
Note: I can not distinguish between the productions for each labor so that I can not enter separate confirmation for each labor.Hi,
You can use the User Exit: CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens
for this purpose..
Take help from the ABAPer for this enhancement..
Regards,
Siva -
More the one Po exists for the material
Hi Plz help
System giving erroru201D More then one Po exists for the material" while creating DO for subcontract PO.
ManjuHii,
Can you tell us the Error Message Number
Regards,
Kumar
Maybe you are looking for
-
Acrobat X; Standard; Saving error
I'm running Windows 7 Pro w/ SP1. I've had this installed for well over a year and it's worked perfectly...until now... If I open a PDF, and edit it in ANY fashion, I can no longer save it and then get the following error message: "The Document canno
-
Regarding Approver agent determination
Hi, I am new to SRM and i have a requirement to change the Workflow which is trigerred whenever a shopping cart is created and mail is sent to the approver for approval of the same. Here on creation of shopping cart i need to do some c
-
I am using the SQL below in the AftExportToDat event script, and I am receiving a data access error message(2147467259). The error log states ORA-00936 - Missing Expression. strSQL = "SELECT PartLastExpFile FROM tPOVPartition WHERE PartName=" & strLo
-
Hi All, I want to process a single trail file using a new replicat process. How do I do that? Is there any extra options I have to use in ADD REPLICAT command?
-
Character value separated by comma
Hi, I am having a character field with numbers as value. I have to apply comma (,) every 3 digit from the lower value (i.e. 1,000,000). How to do it. whether there is any function module to do so??? Thanks in advance