More than one TV with Vision box using house ring ...

I wonder if anyone can help
I have a BTvision box which is connected to one TV using HDMI and want to be able to watch the BTvision output on a different TV from time to time.
I have tried streaming to another room using a sender but the signal breaks up/ is lost in the wall density.
Following advice from BT Vision operator I have purchased a Powerline Netricity 85M twin pack adapter to link the proposed system via the ring main but the connection cables supplied are Ethernet. The only connection on these units is for Ethernet.
The BTvision box has an available USB port. The Hitachi Plasma TV to which I wish to stream the BTvision has an available Scart terminal and HDMI terminal.
Will the system work if I connect the BTvision box to the Powerline Netricity adapter using a USB to Ethernet cable (item 1) and the Hitachi TV to the second Powerline Netricity adapter using an Ethernet to Scart cable (item 2) or Ethernet to HDMI cable (item 3)?
If so who can you supply the items 1 and 2, or items 1 and 3 as appropriate?
Or does anyone know of a different way to connect up the system?

sgbuckingham wrote:
Yes I live in digital only area.
So for the avoidance of doubt I need
1. to buy a universal modulator
2. connect scart output from BLACK BTVision box to the modulator
3. connect aerial output from BLACK BTVision box to the modulator
4. connect, using coaxial cable, the modulator to a splitter (receiving both BT Vision output via modulator and digital coaxial aerial input)*
The modulator will pass all signals so there is no need for a splitter, it has an loop through connection.
see http://www.maplin.co.uk/programmable-universal-modulator-33050
5. connect splitter to the second TV coaxial aerial input socket using coaxial cable*
*If 4 and 5 not possible would I have to connect using SCART - and if so - i presume I could just hardwire by SCART direct from Black BTVision box to second TV using 15m SCART cable negating need for a modulator?
15m of SCART is probably going to be better than using a modulator, which will degrade the signal a bit, as it will have to go via the analogue part of the TV, however I have never tried a SCART lead that long.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

My husband has paired his phone using the remote app to the TV- I would like to do the same with my phone. Can we pair more than one phone to the tv using the remote app ?

My husband has paired his phone using the remote app to the apple TV- I would like to do the same with my phone. Can we pair more than one phone to the tv using the remote app ?

Yes I believe so. Try it and see you can always delete the Apple TV from a remote if it messes things up.
But we have three remotes setup to do this. My iPhone and iPad and my wifes iPhone. She has a different iTunes logon but it seems to work fine

How can i use Itunes to update more than one IPad with more than one owner

How can i use Itunes to update more than one IPad with more than one owner? I own an IPad and my wife owns an IPad. I want to use my system to update both IPads. We have different Apple Accounts and different applications. Is this possible?

Of course, that is too easy. I am such a bonehead.

How do I set or get firefox to print more than one all pages the print using verizon emails is there a setting to change I have been told by verizon techs it is not my printer

when opening an email using verizon emails I can only print one page. I have checked an I do not have a printer or computer problem because the printer prints more than one page with others such as gmail. We feel there is a print setting in firefox that needs to be changed. How do I change this??

That is usually caused by a few different Bugs in Firefox, which seem to be fixed in the Firefox 4.0 betas.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how indesign can do this action.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

One Key FIgure in more than one column with different restrictions

Hi,
I am using a key figure in more than one column with different restrictions, but restriction in one column is affecting the result in other column. What shall i do to make it independent from one another??

Hi Pravender Chauhan,
If you want in Single column different value for different Rows based on same Key Figure, you can create Structure where you can define different logic for each row but using same key figure.
If you want to use different Key figures then you should have to Restricted Key Figure and for any calculation you can use calculated Key figure.
Assign points if Useful.
Regards,
Rajdeep.

HT1420 Can you have more than one device with a different Apple ID authourized to the same computer

Can you have more than one device with a different Apple ID authourized to the same computer

I think you are using the same Composition Class on both project. On the properties tab, you can change this number (e.g.: EDGE-1637270).

How to display more than one column with for each

Hi guys,
how to display more than one column with for each like below?
for each
Item1
Item2
Item3
Item4
Item5
Item6
Item7
Item8
Item9
Item10
End for each
for each
Item1     Item2     Item3
Item4     Item5     Item6
Item7     Item8     Item9
Item10
End for each

Take a look at this to see if the solution provided would work for you: https://blogs.oracle.com/xmlpublisher/entry/multi_column_row_woes
Won't you have more than 10 records in your data file ? If you are going to have only 10 items then you may be able to use position() function to limit it to 3 each..
Take a look at this: https://blogs.oracle.com/xmlpublisher/entry/turning_rows_into_columns
Thanks,
Bipuser

More than one database driver has been used

Hi everyone, I just want to link 2 tables, one in Oracle and the second is in Access, is this possible? Please help, tahnks a lot.
I got this message:
"More than one database driver has been used in this report. If you want to change the database drivers use Database/Set Location.
Please make sure that no SQL Expression is added and no server-side group-by is performed"
This is the query generated:
SELECT "A"."Field_in_A"
FROM "OracleDB"."A" "A"
SELECT `B`.`Field_in_B`
FROM `AccessDB` `B`

The above suggestions are good. You might also consider using a link table from MS Access to have the linking done right inside MS Access.
If you can store your access mdb file on the server where your Oracle database resides this will greatly reduce your network traffic. If the MS Access database must reside on a different machine it can still work but the gains won't be as great. Still, this is an efficient way to do this if you can.
To create a link table in MS Access choose, New, then 'Link Table'. In the Link dialog that appears you can choose ODBC. I recommend using the SQORA driver from Oracle that is installed with SQL Plus.
If you have to link in Crystal Reports instead you still can. However, all data from the Oracle table and Access table will be pulled to the client that hosts Crystal Reports and sorting will be done on the Crystal client.
You definitely have some good options though.

Photoshop on more than one computer with my one subscription price?

I have a monthly subscription for Photoshop CS6. Am I able to download and use Photoshop on more than one computer with my one subscription price?

Also, I have no registered products. I thought my CS6 would have shown up s a registered product. Is this why I cannot find a serial number? I apologize for dragging this on but I simply can't figure this one out.
Also, I read that adobe is no longer updating CS6. And on the Creative Cloud app it doesn't even give the option to download CS6 as a trial. It only offers CC to trial. Should I be doing that?
Thank you again.

Why can't I set up more than one ipod with the same e-mail account?

Why can't I setup more than one ipod with the same e-mail account?

Not really sure what you are doing that this doesn't work...I have an iPhone, iPad and iPod all using the same email account without any conflicts. Can you explain a littl about what you are trying to do that isn't being allowed?

How can I make more than one account with chat on clubwpt?

I can't make more than one account with chat on clubwpt? i know several players that has made as many as 20 accounts with chat.I can make accounts but clubwpt will not give me chat,they must have my IP address ,because their response is " you r allowed one account with chat only." But as I have said several players have several accounts with chat. Can anyone help me? Are there any programs or plugins that can do this?Any help at all will be greatly appreciate.

Open another iCloud account for the other user.

If I have more than one I phone can I use the same apple ID for all off them?

If I have more than one I phone can I use the same apple ID for all off them?

Yes. You can have multiple iPhones on the same ID, up to the maximum 5 total devices. FaceTime will use the sim number for calls and you can configure each phone separately, or configure one and then back it up to iTunes and them restore the image to the others.

Can I install Adobe Creative Cloud in more than one computer with the individual plan?

I don´t have clear about the diference between individual plan an teams. My questions are:
Can I install Adobe Creative Cloud in more than one computer with the individual plan?
The team plan means that I have to pay for US$70 for each computer that i want to install the creative cloud even if I am the only user?

Hi heymarusia,
Yes, you can install and activate Creative Cloud desktop applications on two computers, regardless of operating system, for the individual associated with the Creative Cloud membership. See the product license agreements page for more information.
Regards,

WebLogic Error : Registered more than one instance with the same objectName

HI there, I'm facing a big problem. I have two environments installed on the same physical machine.
I have ALSB and WLI servers running out there.
Environment 1 - WLI port running at 7011 domain name : stp_wli_domain and ALSB port running at 8011 domain name: stp_alsb_homo1 - folders- stp_wli_domain / stp_bea_alsb_homo
Environmnet 2 - WLI port running at 7211 domain name : stp_wli_domain2 and ALSB port tunning at 8211 domain name : stp-alsb_homo2 - folders - stp_wli_domain2 / stp_bea-alsb_homo2
Everything was working fine, but these days I had install new deployments on both environment and I got this error :
java.lang.IllegalArgumentException: Registered more than one instance with the same objectName : stp_wli_domain:ServerRuntime=wli_wls01,Name=stp_wli_domain,Location=wli_wls01,Type=AIRuntime new:com.bea.wlai.management.AIRuntimeMBeanImpl@bcf22dc existing com.bea.wlai.management.AIRuntimeMBeanImpl@de02e6c
The weird is : There is no same object name, as you can see, domains are different, folders are different and ports are diferrent, including multicast addresses.
Have you guys seen this before ?
I'm under pressure here, 'cause some projects had stopped to work.
Please I would appreciate any help.
Tks.
Edson

HI there, thanks for attention..
See ...
There's a lot of confusion with these env's .
I did not built this, so... I'm cleaning my hands.... anyway... :)
I must fix....
Well basically if we have two env's, so we have different project each one right ?
Ok, but I was told that if you have on the same network and same physical machine the name of AdminServer as "AdminServer" in all domains, so it goes with problems... I never heard about it... but is a good practice you put the names for example :
WLI - WLIAdminServer
ALSB - AlsbAdminServer
WLI2 - WLiadminServer2
ALSB2 - ALsbAdminServer2
I would do it.. this way..
But how it wasn't me...
We got..
WLI - WliAdminServer
ALsb - AdminServer
WLI2 - AdminServer
ALsb2 - AdminServer
Have you got it ?
So... I was told that this could be a problem, almost all AdminServers with the same name... guess what ?Some Projects are back to work. but not at all.. only some.. so I 'm breathing better now... but I would like to know if you seen this before ?
I would appreciate your help again.
Unfortunately there's no detailed stack trace to track this
Tks.

More than one TV with Vision box using house ring ...

Similar Messages

Maybe you are looking for