More than one user in iTunes at a time?

Can more than one person log into an itunes account on one macbook air?  we have a firm macbook and multiple users will be accessing it

The only way I know of, is each user will have to log out first, then the " new user " will have to log on with their
Apple ID.
You can have multiple iTune libraries that will allow each user to have their own songs and playlist.
This thread explains how to do that. You just have to hold down the " Option key " while iTunes is starting up.
hope this helps.
John

Similar Messages

  • More than one user per itunes account

    Hello all,
    I am new to iTunes and was wondering if it would be possible to add my daughter to my iTunes account instead of creating her own, and if possible, how?
    Thanks for any help in advance,
    Jon

    Add your daughter?
    Do you mean you want her to be able to download and play the music you have?
    If so, go to iTunes and select the Store Menu. Hit "Authorise Computer" (but with the odd american spelling with a 'z') -- type in your account information and that computer will be able to play and download media you have bought from iTunes.You can go to the Store Menu and "Check for Purchases."
    If you also want your daughter to be able to download items, I'm afraid you will ahev to give her her own (or your) account and password.
    You can go to iTunes and through Edit Menu go into Preferences->Parental Control and put restrictions. Don't forget to hit the lock and place a password!

  • Entire Mac slows down every day, especially if more than one user logged in

    Mac runs fine at the start of each day (after turning it on), but slows down by evening. iPhoto is typically at a crawl at that point, and I can't have more than one user logged in at a time, or the whole system takes forever to do anything. I've restarted, repaired disk, repaired disk permissions, run Cocktail, checked for viruses (VirusBarrier). It's easy to restore normal speed with these moves, but same problem every day. I have 24 GB left on this hard drive--is that too little?
    Should I try erasing hard drive and restoring from Time Machine? Should I reload Mac OS X from discs?
    Advice much appreciated. Thanks.

    Robert Fishman1 wrote:
    I have 24 GB left on this hard drive--is that too little?
    you do the math
    this will help:
    Your Mac needs adequate hard drive space to operate normally. How full can a drive be before it's too full? There is no hard and fast rule that says “X” amount or “%” of free drive space is needed. A low amount of RAM requires more drive space for Virtual Memory’s swap files.
    Problems from insufficient RAM and free hard disk space are discussed in this link
    http://www.thexlab.com/faqs/lackofram.html
    Here’s some general guidelines for minimum hard drive free space:
    1. As a general rule, your available space should be 5GB as an absolute minimum as it generally requires that much free space to perform an Archive and Install of Mac OS X and still preserve some free space for VM swap files.
    2. Some say that your hard drive should have at least 5% of it's capacity available for use. Still others say 10% to 15%. If you routinely process complex graphics and videos, even more space is required.
    Look at these links about freeing up more space.
    Where did my disk space go?
    _*http://www.macfixitforums.com/showflat.php?Cat=&Board=Forum38&Number=770243*_
    Download & use WhatSize described in this link or Disk Inventory X @ _*http://www.derlien.com/*_
    Freeing space on your Mac OS X startup disk
    _*http://www.thexlab.com/faqs/freeingspace.html*_
    Amazing Disappearing Drive Space
    _*http://www.pinkmutant.com/articles/TigerMisc.html*_
    Increase HD Free Space
    _*http://macosx.com/forums/howto-faqs/275191-how-easily-increase-hd-free-space-lap top.html*_
    How to free up my disk space
    http://www.macmaps.com/diskfull.html
    JGG

  • Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

    Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

    You can seach the net for solutions like this one http://appletvvpn.com/how-to-connect-apple-tv-2-to-vpn/ another idea is to use a PC as the control and fit that with a wireless card and set up a ad hoc wireless network that the Apple TV uses. 

  • How Do I Backup More Than One Iphone On Itunes Without The Other Backup Been Deleted?

    How Do I Back Up More Than One Iphone On Itunes On The Same Laptop Without Deleting The Old Back Up?
    Thanks

    I believe when you do a backup it deletes the old one.
    \oops ignore my response, didn't see it was for more than one iphone. sorry

  • How we can lock No more than one user can use the table  at a single time

    Hi Abapers,
    0)  which  function modules to lock & unlock a table.
    1) When you execute the program, we can check if there is any lock on this table. If yes, the user should be able to only view the table contents and not modify.
    2) If there is no lock, then lock the table and go into change mode.
    3) On exiting from the program, unlock the table using the function module.
    4) more than one user can't modify the table just display.
    Note: If there is any lock, display message saying table is locked.
    Plz help me for this requirement.
    Thanks
    Nani

    Hello Nani
    Have a look at the lock object EMMARAE (<i>Lock MARA and MARM/MAKT exclusively</i>) in transaction SE11.
    Inspect the F1 help for field <b>Lock mode</b>:
    DE ENQMODE
    Short Text
         Lock mode
    Definition
         Defines how to synchronize table record access by several users.
    The following modes exist:
         Exclusive lock
             The locked data can be read or processed by one user only. A request
             for another exclusive lock or for a shared lock is rejected.
         Shared lock
             Several users can read the same data at the same time, but as soon
             as a user edits the data, a second user can no longer access this
             data. Requests for further shared locks are accepted, even if they
             are issued by different users, but exclusive locks are rejected.
         Exclusive but not cumulative lock
             Exclusive locks can be requested by the same transaction more than
             once and handled successively, but an exclusive but not cumulative
             lock can only be requested once by a given transaction. All other
             lock requests are rejected.
    If you want to lock a standard table search whether the table is used in lock objects (<i>Where-Used-List</i>). If it is a customer table you have to create your own lock object (including two function modules: one for enqueuing and the other for dequeuing).
    The lock modules can be found in menu <b>GoTo -> Lock Modules</b>.
    Given these lock modules the logic should be quite clear after starting the program:
    1. Request lock -> if successful, continue in Change mode; -> if failed, continue in Display mode
    2. Before leaving the report remove lock (note: no problem if no lock has been set in the beginning).
    Regards
      Uwe

  • Using Remote Desktop Admin app in more than one user account.

    Is possible to have the ARD admin app use the same database and settings over more than one user account?
    eg. I have ARD setup on my Mac as I am in charge of our organisations Macs. However if I am away for a few weeks, one of our other techs would be able to turn on my Mac, log in to a generic account, open ARD and it would be set up exactly as I have it in my user account.
    I know that I could manually set up ARD in the other account, but with the number of machines we have I would rather not have to re-enter all those admin passwords all over again, and then have to remember to update ARD in the other account everytime we get a new machine or make other changes.

    In theory, you could simply copy the com.apple.RemoteDesktop.plist into the preferences folder of the other user. Then they would simply have to know the Remote Desktop Password (which is probably stored in your KeyChain.)
    I've never tried this, but it seems like it would work.

  • How can you set up more than one device on iTunes. I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices.

    How can you set up more than one device on iTunes? I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices. I have all my music/videos on iTunes on my mac book pro. Can you set up separate folders for each device and drop in what ever music/videos from the main iTunes library?

    In itunes it is called syncing and you can choose exactly what content to sync to all devices and it can be different for all of them
    How to sync

  • How Do I Share My Database Between More Than One User Account on the Same Mac?

    How Do I Share My Database Between More Than One User Account on the Same Mac?

    How to use multiple iPhone, iPad, or iPod devices with one computer. The only way is for you to have a separate user account to log into on that computer.

  • Can a user facetime with more than one user at a time

    I can use facetime with Macbook and connect to another Macbook user on another WIFI network... I was wondering if one can facetime with more than one user at a time?

    ellis911 wrote:
    I can use facetime with Macbook and connect to another Macbook user on another WIFI network... I was wondering if one can facetime with more than one user at a time?
    Only if you have more than one device running FaceTime at your end.
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

  • How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

    How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

    If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
    If I was not clear you can use the following link to help you solving your issue:
    Creative Cloud Help | Manage your Creative Cloud for teams membership
    If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
    http://adobe.com/getsupport
    I think this will help you.
    Regards

  • Can we start more than one user created database at the same time

    Hi.,
    Can we start/work more than one user created database at the same time ??
    --Shyam                                                                                                                                                                                       

    Hi Shyam,
    I really dont understand what you have asked?
    If your question is can we start more than one database at the same time then the answer to that is yes but provided to have enough resources on your server to support running of two or more different databases on the same machine.
    Ex Senior DBA

  • Adobe Form used by more than one user simultaneously

    Friends,
    I am working on an online interactive Adobe form using Web Dynpro ABAP.
    once the user enters the data and clicks the submit button, the data is sent to ztables.
    the scenario is that more than one user can possibly use the same form simultaneously. in that case, how can i maintain synchronization ie how to avoid multiple users from using the form at the same time, when the form is already being filled by one user already.
    I am guessing i have to do something with ADS for this.
    Any thoughts or ideas would be greatly appreciated.
    Thanks and Regards.

    Hi Bertrand,
    The purpose of allowing only one user is to ensure data consistency as you have guessed.
    Is there a program name or transaction code where i can look up the lock entries and see if i can apply them to my web dynpro application or the adobe form.
    I would greatly appreciate your help.
    Thanks and Regards.

  • Can we set "IN PROCESS" Status to more than one User

    Hi,
    As per my client current scenario every work item will be sent to 3 useru2019s (One is the supervisor of the other two users). If any one of the user executes the work item it will automatically call a Ztransaction and displays the screen. When any one of the user executes the workitem, then the workitems will dissappears from rest of the users inboxes; Setting "IN PROCESS" status for the person who executed the workitem. The workitem will be in "IN PROCESS" Status untill the User Press "SAVE" button in the transaction.
    If the person whose executed the workitem (IN PROCESS) status, has gone on unplanned leave; then the supervisor wants to forward the workitem of the current user to other user. How can he forward?
    Is there any option to set "In Process" status to more than one User? [Supervisor and Person who executed the workitem]
    Please provide me any advice to the above requirement.
    Thanks in advance,
    Ajay Kumar

    Can you ask your workflow administrator to forward the workitem to the user you want to be sent it to.
    I tried a small case wherein I had forwarded a workitem to myself and another user.
    As I executed it , it went into status IN process and at the same time it got removed from other users inbox .
    Now I went to T Code SWI1 and forwarded iut to another user say USABC.
    As a result the workitem again went into status "Ready" and into the inbox of the user ABC.
    So , you can try this in your case with the help of your workflow administrator.
    Another way is to create the other user as a substitue of the user who is currently executing the workitem.

  • More than one user "using an expression" in a BPM Task

    Hello,
    I want to send a notification step for multiple users. I see two options
    1. Choose one or more UME principals.
    2. Use an expression.
    However I have to send the notification for more than one user using an expression. I'm using this expression, 
    getPrincipal(DO_xyz)
    but this only works for one user. I need something like this
    getPrincipal(DO_xyz);  getPrincipal(DO_xyz2);  getPrincipal(DO_xyz3)
    But this is not possible. I can't use a group because all this information is dynamic and it's born within the process.
    Please, How can I solve this?
    Best Regards
    SU

    Hello Abhijeet,
    I've seen that I can use the getPrincipals adding in the XSD an string with 1..* cardinality. However I don't know how to map an attribute from the UITask to that new attribute in the XSD because in Web Dynpro I can't create an string with cardinality 1..*
    I've tried to create a node (1..*) with a String inside in the UI but I couldn't map it to the process context, it shows me an error that I cannot map a node to a String.
    Thanks
    Regards
    SU

Maybe you are looking for

  • Macbook not loading external drives on start up

    I have two external hard drives attached to my MacBook Pro (running Lion) using a powered USB hub. What is the best procedure to use when shutting down the computer at the end of the night, and when turning it on the next morning. I didn't turn the c

  • Break out to Mono question

    Hey all.. I've got a wierd one here... When i break out a clip to mono, there's two extra .wav files that get created. When i put these two wave files on the timeline, they are abutted one against the other, rather than dropped down on separate mono

  • BPS variable in BeX

    Hi! I have a question. May I use BPS variable in BeX?

  • Oracle projects-Arabic language

    Hi All, I would like to ask about arabic language in oracle projects, users would like to apply oracle projects in Arabic language, but there are several problems appeared during CRP2, and the company that will apply modules said that Oracle doesn't

  • How do I properly change the server name in mountain lion server?

    I need to change my server name to a FQDN, but tried this with Lion server in the past without success. I know in lion you'd use server app, but that's no longer avaiable in mountain lion server and I want to make sure I get this right the first time