More than one validation in Project Profile

Dear all,
I have created a validation rule to validate the company code used between the Project Definition and WBS Element, and it must be the same.  This validation is working
I assigned it in OPSA for the Project Profile that I am working on. The validation was carried out successfully too.
However, in the configuration in OPSA, there is only one field for assignment of validation rule created for one project profile.
Now I have more than one validation required for the same Project Profile. I need to carry out few validations.   Is there any other way (in configuration) that I can do to achieve this?
Pls help.
Thanks.
Best rgds.

Thank you, Ahmed.
Already thought of that just at the point when you replied.
Anyhow, full points for you too.
Cheers.

Similar Messages

  • Can you have more than one Edge Animate "project" on a website?  I'm getting messages that there is already a file with the same name and I'm asked if I want to replace it?!?!

    I've created more than one Edge Animate "Object" for the website, but can't seem to get them both to load into Dreamweaver. Is it possible to have more than one "Object" on a site?
    I'm using Windows 8.1

    I think you are using the same Composition Class on both project. On the properties tab, you can change this number (e.g.: EDGE-1637270).

  • SDK 3.0 : code signing error : more than one certificate for my profile ?!

    Hi all,
    Since I installed the SDK3 with OS3.0, I'm not able to develop on the device because of a provisionning profile issue.
    So, I've revoked all my certificates, created properly a new dev certificate, associated to a developer provisioning profile. Every-thing's fine at this step.
    But in my app, when a assign this profile (also added in the iPhone), and I build, i get a code signing error which indicates that the associated certificate for the iPhone Developer: xxxx is more than once in my keychain !!??
    I've checked the keychain and there is only ONE iphone certificate. So, i really don't understand !
    I've redone this step few times, to be sure... But still the same issue !
    Any clue ?

    Same here.
    I installed SDK 3.0 yesterday and was about to remove and re-install certificate today, until I found this thread.
    SDK 3.0 seems to have problems with handling provisioning profiles. If you use Xcode in Japanese, the provisioning profiles are shown as "?" in the popup menu, while if you start Xcode in English, the correct provisioning profiles are selectable.
    First, I had the "?" issue, then after I switched the language to English, I faced this "more than one certificate in the keychain" problem ...

  • Can RoboHelp projects be part of more than one RH server project group?

    Hi. I'm wondering if a RH project can be made part of 2 or more project groups. I'm interested in having the content of a project appear in more than one "search domain" (RHS virtual Web site -- I've forgotten the term for this.)
    Thanks!
    -Kurt

    Regardless of whether the project is published to a different area / context, you can duplicate the existing Single Source Layout changing the publish properties as required. This would save you time and reduce the scope for publishing to the wrong location.

  • How do I add more than one quiz to a project?

    In Captivate 7 help it mentions you should be sure to name your quizzes because it will help you keep track of them when you have more than one in the same project. However, I cannot find any information on how to add a second quiz to the same project.

    Welcome to the forum,
    Could you tell where this is mentioned in the Help? I believe due to SCORM standards only one quiz per file is possible. Only thing that changed since Captivate 6 is the possibility to add a Pretest. The result of a pretest can be used to take decisions like branching, but is not meant as a real quiz.
    What will be reported, what is stored in the quizzing system variables is always for the totality of the file. You could track results of some questions and show them in the file. Have a look at:
    http://blog.lilybiri.com/intermediate-score-slides
    I don't think this is what you want?
    Lilybiri

  • Can I install more than one configurator profile

    I want to develop 3 or maybe 4 layers of iPad iOS8 restrictions & Passcode rules.
    For example ALL iPads will have enforced Passcode rules, but only SOME iPads ill require content filtering & SOME require Control centre in lock mode.
    The actual working groups of iPads require a lot more complicated set of config elements - above is only an example.
    I'd like to create & install different profiles & INSTALL MORE THAN ONE PROFILE.
    I have tested this on a few iPads & it seems to work.
    My question is - Is this the recommended way / is there a problem if i install more that one profile ?
    Thanks in advance for any help.
    Kind Regards
    George kennedy.

    We install many configuration profiles on each of our devices. We only use one payload per configuration profile so that we can be very granular with our configurations. What I don't know is what would happen if you installed 2 configuration profiles with conflicting restrictions (i.e. one configuration profile allows Messages, and another does not allow Messages). We just make sure we install only one restrictions configuration profile, and then a bunch of other configuration profiles (mail and calendar settings, web clips, WiFi profiles, etc) on each device.
    Hope this helps!
    ~Joe

  • How can I order more than one project to save on delivery costs?

    Is it possible to order more than one project (book) in iPhoto at the same time to save on delivery costs? I have several to order and I dont want to get hit for £5.99 three time if possible. I cant see how to do it or even if this is possible. Any guidance would be much appreciated.
    Regards,
    Andy

    You can only order identical projects on one order. If they are different then a seperate order is required
    LN

  • In Imovie '11, how can I drag more than one set of video clips to my project?

    In  Imovie '11, how can I drag more than one set of video clips into my project.  I know how to highlight in yellow and drag the set, but can I drag a group of sets?  Thanks

    To select multiple clips, hold down the command key as you click multiple clips. Then you can drag them all at once.
    To drag all clips at once, select one, then Edit/Select All. Then drag them all.

  • Can I use more than one database connections in a jdeveloper project?

    I use jdeveloper version 9.0.4.0 (build 1407),Can I use more than one database connections in one jdeveloper project?

    9.0.4 is a fairly old version, so you may only find a few people who know how it worked.
    Assuming you're using ADF BC, once known as BC4J, once know as JBO, in the project, and that the architecture hasn't changed much, then the answer is only 1 connection per project.
    Programmatically you're free to use as many connections via JEE as you see fit, but ADF BC is limited to one connection.
    CM.

  • How to use more than one JCo in one project?

    hi all,
    I want to use more than one r/3 systems and want to switch between them while running the application.
    For that, how can I use more than one JCo connection in one project and how to activate/deactivate them so as to switch in between them? And if that possible then what am I suppose to do in order to fetch the data from activated R/3 while running the application.
    Regards,

    Hi,
    Try this threads
    Multiple Client Logon in JCO
    Multiple JCO client connections
    Regards
    Saravanan K

  • How do I enable Firefox 4 to do a search on more than one word (e.g. "yahoo mail") without receiving the error message "the URL is not valid and cannot be loaded"?

    After loading Firefox 4.0, I changed the address bar search engine to Google Search by Name, so I'd be taken straight to the most relevant webpage when I type in a word.
    It works fine when I type in one word, but if I use a search with more than one word (e.g. "yahoo mail" or "google maps") I get an alert saying "The URL is not valid and cannot be loaded". Is there any way I can fix the address bar to accept multiple word searches?
    I've tried disabling all my add-ons, but it didn't make any difference.

    Hi, this should sort out your problem:
    1. Type in "about:config" into the address bar, this will open the settings menu. Click on "I'll be careful, I promise!"
    2. Search for "keyword.URL" in the filter bar.
    3. Enter "http://www.google.com/search?btnI=I%27m+Feeling+Lucky&q=" into the value field.
    I'm no expert, but I had the same problem which got on my nerves after being so used to being able to type anything in, and following these steps fixed it.

  • How to have more than one project open at a time

    I can't seem to find a way to have more than one project window open at a time.
    This would be sweet. Currently chopping down a 60 minute rehearsal record into separate tracks. Kind of a pain.
    TIA
    Tom

    Tom
    Is that an iTunes question? Are you sure you posted in the correct forum.
    Regards
    TD

  • Should be able to sync more than one project at a time

    We should be able to use the shift key or the command key to sync more than one project at a time. This goes for the "content" pane as well as the "folders" pane.

    Send feedback/suggestions to Apple.
    http://www.apple.com/feedback/ipad.html
     Cheers, Tom

  • How do i add more than one pdf at a time to profile manager books

    How do I add more than one pdf at a time to profile manager books? When I browse to my pdf folder I can only select one pdf at a time. I have 500+ pdf files I need to add. Any help would be greatly appreciated.

    Bucknut wrote:
    I want to add more than one email address to my address book from an email I received. They were in the CC of the email I received. is there anyway to drag them all into an address book group all at once. I hate having to add and address and then having to find the address and then add it to a group. thanks
    no, there is no way to do that, sorry. you need to control-click on every email address one at a time and select "add to address book". if an email is in the address book already that option will not be there.

  • Is it possible to open more than one project window in order to easily work out of two buried bins at a time?

    Hey there,
    I'm working on my second project where I need to frequently access multiple bins that are buried beneath several folders for organizations and it's becoming various tedious and inefficient to keep accessing them, scrolling all the way down to other bin, etc, yet I need them where they are for organizational purpose. Is there a way to open more than one bin in separate windows that I'm missing to make easy access? If not I'll submit a feature request.
    Thanks,
    Andrew

    You might want to go into the Preferences and change the way that bins behave.

Maybe you are looking for

  • Report for finding to whom payments has been made

    Hi Peers, My requiement is to find to whom payment has been made , I am having the document number , document type , profit center. I had check FB03 but also but i dont know exactly where to search. Please tell me how can i do it. Tista

  • You are posting directly to a tax account. Enter the tax base amounts per i

    Hi Team, While posting JV againset to tax GL account we are getting bellow error message """"Enter the tax base amounts for account 351200 in company code 1111 Message no. F5A375 Diagnosis You are posting directly to a tax account. Enter the tax base

  • Connection Pool Metrics in ASC - doesn't seem to reflect the usage

    Guys, So i am trying to monitor the jdbc connection pool usage using the Application server Console (following the link --> Cluster Topology > Application Server: engas-machine > OC4J: oc4jinstance > JDBC Resources > Connection Pool Metrics: "myconne

  • Can't screen shot on iPad anymore

    Good afternoon, I have different issues following my version update to 6.0. One of them is that I can't screen shot on my iPad2 anymorewhereas the feature worked perfectly well before update. Can anyone help me ? Thanks in advance for your answers an

  • How to startup from CD, if CD not in drive?

    i bought a brand new Mac Pro, and i have not turned it on yet. on my first power-up of this machine, i want to startup from my system CD (instead of the internal system drive it shipped with) how do i do this, since the CD is not IN the machine at pr