More than one Value for a Category

Hello,
it is possible to assign more than one value of a category to a document by assigning the category once more. Is it a bug or a feature?
If it is not a bug, I wonder why it is not possible to search for a document with two values of one category set? And why isn't it possible to combine category values with "OR" in my search query?
Best regards,
Christian

Only one video role, only one audio roll, per clip. Only one as these are "Media Stems", and when you work with Stems, only one roll per asset video, one per asset audio.

Similar Messages

How to pass more than one value for one column in procedure

hi
select id, name from col_tab where dept_name in ('ECE','CIVIL');
when i was running this it is working well.
CREATE OR REPLACE PACKAGE pack_str
AS
TYPE type_refcur IS REF CURSOR;
PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
END pack_str;
CREATE OR REPLACE PACKAGE BODY pack_str
AS
PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
IS
BEGIN
OPEN ans FOR
select id,name from col_tab where dept_name in char_in ;
END str;
END pack_str;
the package was created.
my doubt is
1.how to pass more than one value for char_in (e.g ('ECE','CIVIL'))
2. when i was storing the value in string like val = 'ECE,CIVIL' ,
how to get the id,name for ECE and CIVIL.
plz help me

Hi Rebekh ,
I am recreating your packages for the desired output.
CREATE OR REPLACE PACKAGE pack_str
AS
     TYPE type_refcur IS REF CURSOR;
     PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
END pack_str;
CREATE OR REPLACE PACKAGE BODY pack_str
AS
     PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
     IS
          lv_t varchar2(200);
     BEGIN
          lv_t := REPLACE(char_in,',',''',''');
          lv_t := 'select id,name from col_tab where dept_name in (''' || lv_t || ''')' ;
          OPEN ans FOR lv_t;
     END str;
END pack_str;
Note:-
Input Parameter char_in is a comma seperated value for dept_name
-Debamalya

Can we give more than one value for an Authorization field in Auth-Check.

Hi all,
Can we give more than one value for an Authorization field in Auth-Check.
Ex: AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
ID 'ACTVT' FIELD '02'
ID 'CUSTTYPE' FIELD <Value 1> <Value 2> <Value 3>.
IF SY-SUBRC 0.
MESSAGE E...
ENDIF.
If yes, please help me with exact syntax.
Think it will be like
ID 'CUSTTYPE' FIELD: <Value 1>, <Value 2>, <Value 3>.

Hi,
yes we can give more than one field.
program an AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT <authorization object>
 ID <authority field 1> FIELD <field value 1>.
 ID <authority field 2> FIELD <field value 2>.
 ID <authority-field n> FIELD <field value n>.
The OBJECT parameter specifies the authorization object.
The ID parameter specifies an authorization field (in the authorization object).
The FIELD parameter specifies a value for the authorization field.
The authorization object and its fields have to be suitable for the transaction. In most cases you will be able to use the existing authorization objects to protect your data. But new developments may require that you define new authorization objects and fields.
please reward points, if it is useful.
satish.

Select more than one value at a time from an LOV?

Is it possible to configure an LOV-based text field so more than one value at a time can be chosen from the drop-down LOV list? This is a user requirement for specifying multiple values in an SQL WHERE clause.

Rather several select fields because single returned value is a functional limitation of <select>.

URGENT: passing more than one value at the same parameter

Hello friends at www.oracle.com,
if I have a Forms program that sends some parameters to a Report, how can I send more than one value at the same parameter that is being sent?
For example: the Reports parameter P_CODE should receive (from Forms) and print the values 1, 2, 3 and 4, each one in a different page. But, only 4 is being printed, and these values aren't saved at a database, so I have to pass the other three values too. How can I solve this problem?
This is quite urgent and I need help on this.
Best regards,
Franklin Gongalves Jr.
[email protected]

Thanks to Oracle Reports Team for answering! I'm sure this will work.
Best regards,
Franklin Gongalves Jr.
[email protected]
hello,
on the forms side, you will have to build the list for this parameter by e.g. string concat.
on the reports side you will have to "decode" this parameter according to how you built it in forms.
e.g. if you pass the list like this "10~20~30" you might use a where-clause in the query
... where instr(myCol, :myParam) >0
regards,
the oracle reports team --pw

Select more than one value in a query

Hi,
since V7.0 we have a problem in the selection screen to select more than one value in a easy way.
How can I select e.g. 20 BuisinessPartner with one selection?
To create a variant isn't possible, because every user needs different values.
Thanks

Hi,
Go for "Selection Options " instead of Multiple single values ..
With this option u can get single values, multiple single values & ranges also..
Can u please explain clearly regarding that function of whole excel sheet into a variable??
Regards,
Vijay
Edited by: vijaya kumar on May 22, 2009 6:15 PM

SapScript - Print table out_par - more than one entry for object

Hi Gurus,
following problem.
I have a SapScript form and call an external program from within the form.
In this programm I get more than one entry for the same out_par-value - this is correct.
My problem now is that on the form there is only printed one of the entrys.
Here my coding in SapScript.
/:           DEFINE &ZZ_OBJECT& = '        '
/:           PERFORM LESEN_OBJEKTLIST IN PROGRAM ZIHFORM
/:           USING &CAUFVD-AUFNR&
/:           CHANGING &ZZ_OBJECT&
/:           ENDPERFORM
*           All involved object:
*           &ZZ_OBJECT&
Many thanks in advance for your help.
Regards

In Sapscript PERFORM-ENDPERFORM statements, the parameters can contain only one value as they are variables of type character & length 80.
If you want multiple values in your CHANGING parameters, fetch all of them in different variables. Also, in your program store them in the same order, in the output internal table of structure ITCSY.
Check this thread
http://wiki.sdn.sap.com/wiki/display/profile/ExternalSubroutinesinSAPScript

TableView - Filter more than one value in same column

Hi folks,
I faced a problem on filtering a field more than one value.
Does it possible solution for us to bring out filtering function while user try to enter few values in the SAME filter field?
Thank you.
First, i need to clarify my exact problem.
--> I have created one tableView with filter = "server". Then i want to allow my user to enter few filter values in same field column.
Example 1:
Before
COL1 COL2 COL3 COL4
l--II--
l-filter1I--I--
*filter1 = AAA, BBB
AAA AAA AAA AAA
BBB BBB BBB BBB
CCC CCC CCC CCC
DDD DDD DDD DDD
EEE EEE EEE EEE
After
COL1 COL2 COL3 COL4
l--II--
l-filter1I--I--
*filter1 = AAA, BBB
AAA AAA AAA AAA
BBB BBB BBB BBB
Is that any good suggestions to solve my doubt?
Message was edited by:
 GP Poh

check out this work around. in this sample currency column supports multiple values and multiple values in the filter column should be enter with comma as separater.
page attribute:
filtertab TYPE RSELOPTION
filter_wa TYPE RSDSSELOPT
itab TYPE FLIGHTTAB
layout
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page title=" " >
 <htmlb:form>
 <htmlb:textView id ="tex"
 text = "Filter on Currency Column support multiple values, they can be entered with comma as separater like 'usd,DEM'"/>
 <htmlb:tableView id = "tv1"
 design = "ALTERNATING"
 table = "<%= itab %>"
 filter = "APPLICATION"
 columnHeaderVisible = "true"
 sort = "SERVER" />
 </htmlb:form>
</htmlb:page>
</htmlb:content>
oninitialization
select * from sflight into table itab where currency in filtertab .
oninputprocessing
* event handler for checking and processing user input and
* for defining navigation
DATA: table TYPE REF TO cl_htmlb_tableview .
DATA: tv_data TYPE REF TO cl_htmlb_event_tableview.
DATA: filter_value TYPE string .
DATA: fil_val TYPE STANDARD TABLE OF string ,
 fil_val_wa TYPE string .
REFRESH filtertab .
table ?= cl_htmlb_manager=>get_data( request = request
 name = 'tableView'
 id = 'tv1' ).
IF table IS NOT INITIAL .
tv_data = table->data .
IF NOT tv_data IS INITIAL .
 CALL METHOD tv_data->get_row_filter_value
 EXPORTING
 column_index = 6
 RECEIVING
 value = filter_value.
 IF NOT filter_value IS INITIAL .
 TRANSLATE filter_value TO UPPER CASE .
 REFRESH fil_val .
 SPLIT filter_value AT ',' INTO TABLE fil_val .
 CLEAR fil_val_wa .
 LOOP AT fil_val INTO fil_val_wa .
 filter_wa-sign = 'I' .
 filter_wa-option = 'EQ' .
 filter_wa-low = fil_val_wa .
 APPEND filter_wa TO filtertab .
 ENDLOOP .
 ELSE .
 REFRESH filtertab .
 ENDIF .
ENDIF .
ENDIF .
Regards
Raja

Can I store more than One value in HashMap using Same kay?

Hi,
I want to store more than one value in HashMap using same key................. is it possible?
If yes, then please give me source code for that.....
Thankx in Adv.......

I want to store more than one value in HashMap using >same key................. is it possible?I don't think so
Message was edited by:
manuel.leiria

BDC: To Include more than one value in one field.

Hi All,
I want to include more than one value in a particular filed, while its running in back ground.
The requirement is like this
perform bdc_field using 'PNPABKRS-LOW'
'01'.
01 is a filed on employee payroll type : management staff.
02 - Filed staff
03 - work men
How can i include 02 and 03 also for the perform.
it has to check whether the employee can belongs to any of the above three.
Thanks in Advance,
Points Rewarded for Help full answer.

Hi, Ramesh,
You can not use all the 3 fields at the same time, instead you can pass on one variable in that perform.
eg.
take all your staff value in one internal table and use the following code
loop at i_tab into wa_tab.
data : l_variable type string.
perform bdc_field using 'PNPABKRS-LOW' wa_tab-staff.
endloop.
in first run of loop it will take value '01', in second '02' and so on.
regards,
vikas
plz reward if helpful.

Possible to return more than one value?

If I have a somethign like this:
public int test()
return 5;
}Is it possible to have test() return more than one value? And if it can, can you post an example showing how?

Could you post an example of how to do this?If you do not know how to define a class, you need to start from the very beginning.
Sun's basic Java tutorial
Sun's New To Java Center. Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
http://javaalmanac.com. A couple dozen code examples that supplement The Java Developers Almanac.
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's Thinking in Java (Available online.)
Joshua Bloch's Effective Java
Bert Bates and Kathy Sierra's Head First Java.
James Gosling's The Java Programming Language. Gosling is
the creator of Java. It doesn't get much more authoratative than this.

LOV Return more than one value to differenent items on page

New to express. I need to returm more than one value from list of LOV. For example: LOV => select a, b, c from testtable
I would then like to
a to populate item1 => with submit
b to populate item2 => hidden
c to pupulate item3 => hidden
as items on my page
when a user chooses a (with submit) in item1 b and c would populate also, b and c are hidden to the user. Any advice?

Dear Frank
I did it as like as the following link lead me:
http://www.oracle.com/technology/obe/obe11jdev/11/adfbc_new_features/adfbc.html
The problem has been appeared when I attached the "Create" button and when press on it to create new record, then the "LOV" couldn't work correctly.
Thanks for your reply

Can a method return more than one value?

I was studying for my biology exam and I got bored and I started thinking and then I wandered if a method can return more than one value...?
For example, if I want a method to return a row a column, I make a method that returns an int. But what if I want to return two ints? Or what If I want to return an integer and a string? Is it possible or do I have make two methods, each returning one thing?
What I always did until now is is I want for example to return a few integers, I would store them in a String and then when I return the string, I parse the numbers out using stringtokenizer... but it doesn't look like the best way... and it's pretty annoying...

I'm weak on terminology, hence I don't even know what
AFAIK means...As Far As I Know
This doesn't really make sense for me. It's more
efficient to make a whole class just for two
integers, than having two methods? Efficiency is not the point. The flow is.
If you have two methods, the caller must be aware of both of them. The other way it's up to the callee.
Just because the
two integers are related to each other? Doesn't
making a class require more memory usage than just
making two one-line methods?The memory usage is not wholly irrelevant, but there are ways to handle that (caching, inlining, etc.).
It's a bit hard to counter your point for me, but if you had done a lot of GUI painting stuff, you'd see all those Points, Dimensions, Rectangles, you name it, are quite invaluable.

Can oracle function return more than one value

Hi All
please answer can oracle function return more than one value
need one schenario
regards

Can any function, irrespective of the language, return multiple values?
OF COURSE NOT!!
So why do you think Oracle will now suddenly do it differently than all other languages? Never mind that it is impossible for a function (a unit/module of code) returning a memory address, to return multiple memory addresses. The machine code that does that, has not been yet been designed/implemented.
I am continually amazed that this question is asked. It is about something so fundamental in almost every single 3rd and 4th generation language... something that is taught right at the start... the definition of what a procedure and what a function is.
Sorry, but I simply cannot pull punches on this subject and smooth it over. There is something fundamentally wrong with your training as a programmer if you have to ask such a question about a function.
And whatever programming skills you build on such a foundation, will be seriously lacking.
I kindly suggest that you get back to the very basics of programming - and review and revisit until you fully understand it. There are no shortcuts in becomming a good programmer.
Message was edited by:
Billy Verreynne

Html check box pass more than one value into bean

Hi all'
I have group of check box in html , I need to pass more than one value
into bean an ddisplay in jsp
what do i do wrong
private Vector select =new Vector();
private String mybox =null;
public download() {
 again();
/* Accessor Methods */
private void addmybox(String name){
 select.addElement(name);}
public void setMybox(String name) {
 mybox = name;
public String[] getMybox() {
 String[] s = new String[select.size()];
 select.copyInto(s);
 return s;
 in my htmli have <%
 String[] mybox= format.getMybox();
 for (int i=0; i<Mybox.length; i++) {
 <%= format.getMybox%>
%>
i got error at <%= format.getMybox[i]%>

Hi ram,
thank you, I don't have ideal in my mide .
in my jsp I have
<td> <input type=checkbox name=mybox value=<%= link.getNewNum()%>></td>in my servlet I have something like
String[] checked = request.getParameterValues("mybox");
 try {
 conn = DriverManager.getConnection("jdbc:microsoft:sqlserver://localhost:1433","A#$","RE@89");
 conn.setCatalog("sequences");
 stmt = conn.createStatement();
 for(int i=0; i<checked.length; i++){
 String select=checked;
String Sql=" select NewNum, Name, Length, Segment, Sequence";
Sql+=" from Sec04";
Sql+=" where NewNum='"+select+"'";
Sql+=" union";
Sql+=" select NewNum, Name, Length, Segment, Sequence";
Sql+=" from MySec";
Sql+=" where NewNum='"+select+"'";
Sql+=" union";
Sql+=" select NewNum, Name, Length, Segment, Sequence";
Sql+=" from Sec03";
Sql+=" where NewNum='"+select+"'";
Sql+=" union";
Sql+=" select NewNum, Name, Length, Segment, Sequence";
Sql+=" from Sec02";
Sql+=" where NewNum='"+select+"'";
Sql+=" union";
Sql+=" select NewNum, Name, Length, Segment, Sequence";
Sql+=" from Sec01";
Sql+=" where NewNum='"+select+"'";
rs = stmt.executeQuery (Sql);
while(rs.next()) {
String Name = rs.getString("Name");
String Segment =rs.getString("Segment");
String Length = rs.getString("Length");
String Sequence = storeSequenceData(rs.getString("Sequence"));
String SContent = Name + " ," Segment ", "+ Length + "\n" +Sequence ;
now I want
String SContent = Name + " ," +Segment + ", "+ Length + "\n" +Sequence +"\n" + Name+"Segment+","+length+"+"\n" +Name......untill the end
it sees like I need to look st on shipp car. is that right??
Thank you !!

More than one Value for a Category

Similar Messages

Maybe you are looking for