More than one version for orgunit attr

Hello all,
I want to load more than one version for ORGUNIT.
I'm able to load few hierarchy version for orgunit but only one version (the active one) for the attributes and texts of ORGUNIT .
Furthermore in my R/3 implmentation position is a part of orgunit hierarchy.
this means that position is also part of a specific version of orgunit.
But when loading POSITION into BW we can only load the active plvar so i
actually lose the information existing in other plvar for position in R3.
How can i extract and load more the one version for position and orgunit ?

Yes, there are multiple models. Buy one designated for your country.

Similar Messages

Can you have more than one version of Premiere Elements on one computer

I have an Apple iMac 2.5GHz Intel Core i5, 8 GB Memory running OSX 10.7.5. I currently have Adobe Premiere Elements 9 installed and just purchased Premiere 11. I know they changed a lot on the new version and want to make sure it performs well on this computer and want to keep the older version in case my previous projects don't mesh well with the newer version. Can I have both versions installed on this computer?

Having more than one version of PrE on a computer has never been an issue for many users. Some have had up to four installed, for testing, and for gaining familiarity with newer versions. I do not recall any having any issues, at least not any, that were posted.
While I seldom have more than one version of PrE installed, I often have several versions of Adobe Photoshop, and have never had an issue. Same with Adobe Audition, and PrPro. Most Adobe programs (Acrobat Reader is one exception) will install in totally different folders, and there are seldom confilcts.
Good luck,
Hunt

Can I use more than one version of Adobe Reader on an iPad, 8.1 touch and 11.1

Can I use more than one version of Adobe Reader on an iPad adobe Reader Touch and Reader 11.1 . . I use Acrobat XI Pro although I had some old files that were stored on adobe.com from a prior version of acrobat 9 student edition.
I guess the same question for my Surface Pro2 Computer might apply, although I gather from what I read that you shouldn't have two versions of reader on a computer.

If I may add a qualification: on a device running full Windows 8, you may have both Adobe Reader Touch and Adobe Reader (normal desktop edition). This does not apply to the primitive devices which cannot run desktop apps (running "Windows RT"), and while I may be wrong, I believe that the Surface 2 is such a device.

Can I have more than one version of Reader on the same machine?

I'm running Reader 8 because I like the user interface better than the more recent versions. I'd like to also install the latest version only for some integrated tools that require it for use with AIR. Can I have both installed? I don't see any options when I try to download and install the latest versions (like where to install the software. Ideally I'd like Reader 8 to be my default application to open .pdf documents.
Thanks in advance,
Gabor

C F,
Thanks for the reply. In the meantime I have found that my integrated tools (Xilinx Document Navigator) allow me to open documents externally using any version / brand of reader. It's not quite as nice as seeing the documents in the tool's own windows, but it's a good enough option for me given the relative infrequency I use this tool. If I decide to try to integrate the Document Navigator with Adobe Reader, I might get away with using Reader 10. Is there an app note on installing more than one version, or is this so "not recommended" that I'm on my own if I want to try it?
Regards,
Gabor

More than one version of the same widget

How do I specify the CSS attributes if I want more than one
version of each widget in the same site?
Say, for example, I want two variations of VTabs with
different sized Tabs (and other attributes), what's the easiest way
of specifying the variations?
Chris

The orginals for those classnames stay the same, Spry will
use your defined classnames instead of using the hard coded
classes.
This only counts for the:
-tabHoverClass
-panelVisibleClass
-tabSelectedClass
-tabFocusedClass
U can just replace the classnames for all other atributes
with your desired classes.
Just remember for each new tabpanel u will have to create a
new tabpanel constructor:
var TabbedPanels1 = new
Spry.Widget.TabbedPanels("UNIQUE-ID-HERE");
I suggest u read this:
http://labs.adobe.com/technologies/spry/articles/tabbed_panel/index.html
And check the samples:
http://labs.adobe.com/technologies/spry/samples/tabbedpanels/tabbed_panel_sample.htm

Can I have more than one ID for my iPad

Can I use more than one ID for my iPad, iPhone and iPod.? I am using the same for all 3 now.
My wife have one iPod and can I share my apps with her.? And if...How?
We are using the same computor for all devices.
Thanks in advance....
Best regards.....Reidar45

The spell check goes with the keyboard layout being used. Just activate both English and French in Settings > General > Keyboard and then use the Globe key to switch between them.
(I think there is bug in Pages, however, so that this doesn't work for that -- you have to change the OS language).

Can i create more than one instance for single database?

HI
anybody can tell me how to create more than one instance for single database(without using RAC)?
thanks
Kalanidhi

Anandji,
I sometimes think differently. I also think like what this person is asking..(although I have installed and administering 5 different RAC databases)
The main doubt of mine is that we create multiple instances accessing the same storage area.
Anyway the controlfiles of all instances will have the same information except the instance_names and instance id's.
Hence I always think , why can't it be possible to to create another instance in the same system and point it to a controlfile which is copied from the other instance.
Why can't the same files be shared between the two instances in a same system ?
I know I am thinking a little bit confusing...
Anyway I need to test that also...
Mahesh.

Creating more than one account for a single user

I was wondering, if I creat more than one account for me (the only person that uses my powerbook) is that going overboard? I mean, lets say I am logged into the standard account and I want to learn more about the bash shell and using terminal which I am new to, if I **** something up will the whole system be toast or will only things in that account be messed up? Like could I then just log into my admin account and delete the other messed up one? Or no? My theory was that this was a way of keeping my comp safe from myself, being that I am new to macs and moreso that I am new to the unix side of things and want to start learning the command line without worrying about screwing up my whole system. I would just use the standard account for everyday use (like what I do now) or experiment with terminal, and when I need to download something or change some settings that requires me to be logged in as admin then I would log in and download what I need then log out and use it in the standard account...am I just wasting my time? Is what I am doing any "safer" than just having one admin account and thats it?
Thanks for all the help! It feels good to be a part of the goodguys team =)
Thanks again!

Ghost,
First, I don't subscribe to the "one should not use an admin account" philosophy. For someone who is the owner and main user of any given machine, I see the use of anything but an admin account a bit anal, totally unecessary, and needlessly complicating.
On the other hand, I don't see the need for more than one admin account on any given machine. Yes, I see exceptions to this, and many people favor having a second admin account as a "backup," but I have never had more than one admin account on any of my machines, and have never encountered a situation where one would have helped.
In short, I like the idea of having a "main" admin account that is used most of the time, and then having "secondary" accounts (all non-admin) for any additional users that might log in.
Now, any limitations that apply to you as a GUI user of an account, admin or not, will apply to you at the command line as well. In other words, you can't get yourself into any more trouble at the command line than you can within the GUI. In fact, you might even be better protected at the command line than you are in the GUI. I say this because any action that would ordinarily "elevate" you above the standard capabilities of a non-admin user require the use of "sudo." Avoid the use of sudo, and you can avoid any problems.
That doesn't mean that you wouldn't be able to do something stupid that might wreck an account that contains "all of your stuff," and on which you depend. It is not likely that you would damage your System, but it is entirely conceivable that you might, for example, accidently delete or overwrite your entire HOME folder. Oops!
If you simply don't trust yourself with the command line, a second account might be a good place to experiment. Maybe create it as a non-admin account at first, with the option to change it to an admin account at a later time, when you want to learn how to use "sudo" to do more powerful things. By then, you will understand what not to do. Eventually, you will have the confidence to use the command line in your own account, which will have been an admin account all this while.
Scott

Can I have more than one version of adobe reader at the same time?

can I have more than one version of adobe reader at the same time?

If I may add a qualification: on a device running full Windows 8, you may have both Adobe Reader Touch and Adobe Reader (normal desktop edition). This does not apply to the primitive devices which cannot run desktop apps (running "Windows RT"), and while I may be wrong, I believe that the Surface 2 is such a device.

How to pass more than one value for one column in procedure

hi
select id, name from col_tab where dept_name in ('ECE','CIVIL');
when i was running this it is working well.
CREATE OR REPLACE PACKAGE pack_str
AS
TYPE type_refcur IS REF CURSOR;
PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
END pack_str;
CREATE OR REPLACE PACKAGE BODY pack_str
AS
PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
IS
BEGIN
OPEN ans FOR
select id,name from col_tab where dept_name in char_in ;
END str;
END pack_str;
the package was created.
my doubt is
1.how to pass more than one value for char_in (e.g ('ECE','CIVIL'))
2. when i was storing the value in string like val = 'ECE,CIVIL' ,
how to get the id,name for ECE and CIVIL.
plz help me

Hi Rebekh ,
I am recreating your packages for the desired output.
CREATE OR REPLACE PACKAGE pack_str
AS
     TYPE type_refcur IS REF CURSOR;
     PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur);
END pack_str;
CREATE OR REPLACE PACKAGE BODY pack_str
AS
     PROCEDURE str(char_in VARCHAR2,ans OUT type_refcur)
     IS
          lv_t varchar2(200);
     BEGIN
          lv_t := REPLACE(char_in,',',''',''');
          lv_t := 'select id,name from col_tab where dept_name in (''' || lv_t || ''')' ;
          OPEN ans FOR lv_t;
     END str;
END pack_str;
Note:-
Input Parameter char_in is a comma seperated value for dept_name
-Debamalya

More than one role for a clip.Is it possible?

Is it possible assign more than one role for a clip?
thx

Only one video role, only one audio roll, per clip. Only one as these are "Media Stems", and when you work with Stems, only one roll per asset video, one per asset audio.

More than one index for a column.

Hi,
I am trying to create more than one index for a particular column of the table.But oracle does not allow more than one index for a column.
I just want to make sure whether we can add more than one index for a column
and if yes what are the scenarios.
Because as far as i know some database allows more than one index for a single column.

You cannot create more than one index for the same column(s).This is not so true Nicolas. Look at following example:
SQL> create index idx_mytest_id on mytest(id);
Index created.
SQL> create index idx_mytest_id_desc on mytest(id desc);
Index created.
SQL> create index idx_fbi_mytest_id_upper on mytest(upper(id));
Index created.
SQL> create index idx_fbi_mytest_id_upper_desc on mytest(upper(id) desc);
Index created.
SQL> create index idx_fbi_mytest_id_lower_id on mytest(lower(id));
Index created.
SQL> create index idx_fbi_mytest_id_lower_id_dsc on mytest(lower(id) desc);
Index created.
SQL> create index idx_fbi_mytest_id_tr_up on mytest(trunc(upper(id)));
Index created.
-- I can still continue but for this example this will be enough
SQL> select index_name from dba_indexes where table_name = 'MYTEST';
INDEX_NAME
IDX_MYTEST_ID
IDX_FBI_MYTEST_ID_UPPER
IDX_MYTEST_ID_DESC
IDX_FBI_MYTEST_ID_UPPER_DESC
IDX_FBI_MYTEST_ID_LOWER_ID
IDX_FBI_MYTEST_ID_LOWER_ID_DSC
IDX_FBI_MYTEST_ID_TR_UP
7 rows selected.You can see 7 indexes for one column (ID) and I could still continue...
So according this test we can say you can't create more than one index for one column (or the same group of columns in case of composite index) with same condition(s).
Message was edited by:
Ivan Kartik
Or simplified: you can't create the same index for same column(s) twice :-)

More than one style for a single link state?

RH 8 outputting CHM
Hello,
Is it possible to define more than one style for a single link state?
For example, I would like a link in the footer of my master page to be smaller than the links that appear in the body of my topics. I want to retain behavior, and simply change the point size.
I can't simply hand format in Design mode, because my link is within a script. Or, am I missing something easy here?
Thanks much.

I'm pleased to say I figured out how to change the formatting of a hyperlink embedded within a script.
Within the script, I used a var string to reproduce the text in my link. Then I used another var to change the string size.
So, here's the part of my script that produces what I'm after:
var mailDisplay = 'Was this information helpful? ';
var str = 'Was this information helpful?';
var mailDisplay = str.fontsize("1");
Upon generation of the CHM, the script trumps the CSS. It's a beautiful thing.

Firefox updater unable to update with message saying ensure that I do ot have more than one version of firefox running

As I start up firefox, I'm prompted to update but it fails saying that it cannot update and that I should make sure that there is not more than one version of firefox running

It was not directly useful, although interesting. It convinced me that there was a problem in android, so I reset to factory defaults and reinstalled Aurora. Now sync is working well again. thanks

Pass more than one argument for action in the URL

Hi,
i've created a DesktopURL object with which i refere back to the Front Page. With the same URL i want to minimize two channels at the same time. I know that i can minimize one channel with the "action=minimize&provider=myProvider" attribute.
Is there a way to pass more than one provider for an action ?
Or exists another way to do that ?
thx

In fact, my code was completely right. I tried with commas and it hasn't work. When I tried again without commas it worked perfectly...
Nevertheless, thanks for the advice!
Gilmar

More than one version for orgunit attr

Similar Messages

Maybe you are looking for