More than one video effect for same clip?

Is it possible to apply more than one video effect to the same clip? I know this could be done in previous versions of iMovie, but I can't seem to figure out how to accomplish this task in '09!!
Thanks!

In general, no, you cannot do two video effects at the same time.
However, black and white is a special case, because you can achieve this using Video Adjustments.
You can select Aged Film and then adjust to Black and White in Video Adjustments.
Try setting the Saturation slider all the way to the left (0%)
Then, move the Contrast slider to the right until it is around 50%.

Similar Messages

Adding more than one video effect

I have a short clip that I want to give both the "aged film" look to as well as make it black and white.
Both these effects are available under Window > Clip Adjustments, but I can't figure out if it's possible to use both at the same time. Anyone know? Thanks.

In general, no, you cannot do two video effects at the same time.
However, black and white is a special case, because you can achieve this using Video Adjustments.
You can select Aged Film and then adjust to Black and White in Video Adjustments.
Try setting the Saturation slider all the way to the left (0%)
Then, move the Contrast slider to the right until it is around 50%.

Color Correction Effect: "Change color to" change more that one color in the same clip(pp Cs4)

Hi all, I have watched and tried some tutorial to achieve this. My question though is how to change more than one color in the same clip. I'm asking because when I tried I had no problem to "color pick" one shade of my (Rock face) and turned it into a natural color picked from a good clip. But I was left with all the other shades to work on and if I repeated the procedure (pick the next destination color to replace) it cancelled my previous change so it seems that I can change only one color... I must be doing something wrong.

Wow! I did play a few other Youtube 3 color correction, but this one is so good and comprehensive. I did also like RGB curves tutorial. I don't know if all this is appropriate for my 1983 VHS clip nearly all green (I probably had the wrong white balance). What I achieved so far is not very good but I think much more watchable than all green! Than You again for this . I do also realise these guys are expert and still they have to use lot trials and errors and various techniques before getting what they want. I do appreciate their generosity to make some of their knowledge available to all of us.

Use more than one transition in the same time between two video clips?

Dear Premiere Pro programmers,
Could you please create a way to use more than one transition in the same time between two video clips without exporting to media, or creating new sequence, or using another layer (adjustment or transparent)?
Message was edited by: Kevin Monahan
Reason: Next time, create a more descriptive title.

Hi Aqsa Nori,
I'm not sure what you are imagining, but it might be possible to achieve by key framing effects. Can you tell us what you want to do? Also, please feel free to file a feature request: http://adobe.ly/feature_request
Thanks,
Kevin

I have more than one copy of the same song in my iTunes. Some have the icloud symbol next to them and some do not. I need to clean this up but I am afraid to delete the songs for fear I will lose them.

I have more than one copy of the same song in my iTunes. Some have the icloud symbol next to them and some do not. I need to clean this up but I am afraid to delete the songs for fear I will lose them. Please help! On top of that my Mac keeps telling me my start up disc is full and I am deleting stuff like crazy!

Welcome to the  Discussion Forums
It won't be a problem if you delete your extra copies.
I don't download very much to my tv, I do sometimes if I'm in bed but usually I do it from itunes. However if you have not fully downloaded something to the tv it is possible to start the download from itunes as well, you have likely activated 'check for downloads fin itunes in some way, could be by opening itunes, selecting 'check or downloads' from the advanced menu or that you simply have automatically check for downloads set in your prefs and it has checked coincidentally.

Add Suppporting Details for more than one periods at the same time for the same Account in Planning.

As we know, in planning form, we can add supporting details to one cell for the level 0 members intersections.
But can we do that as below:
add supporting details for more than one cells at the same time?
I tried to do that in workspace and smartview, neither is working.(my workspace version 11.1.2.2.300.20)
I wonder if i am not with the right version, because i don't know how to get the below.
Can any one explain?
Thank you.

Hi,
I have tried in Smartview for a simple form where my period dimension was in columns and accounts in rows.
You need to select multiple period and select supporting details, it will show those selected period for which you can add the supporting details.
You can add these details and then submit the data in the form.
Regards,
Sourabh

Enter more than one personnel number for the same confirmation in CO11N

More than one labor working on Machine work center simultaneously.
So that during production orders confirmation in CO11N we need to enter more than one personnel number for the same confirmation but in CO11N the system allow me to enter only one personnel number.
Note: I can not distinguish between the productions for each labor so that I can not enter separate confirmation for each labor.

Hi,
You can use the User Exit: CONFPP07 Single Screen Entry: Inclusion of User-Defined Subscreens
for this purpose..
Take help from the ABAPer for this enhancement..
Regards,
Siva

HT1657 Can you rent more than one movie at the same time?

Can you rent more than one movie at the same time on itunes?

I think Justin is correct and you should have statistics in place and a reasonable partition scheme so that the optimizer selects the correct partitions rather than telling it what to do. You paid a lot for partitioning after all.
There are some, possibly misguided, examples in the manuals showing how to create a view so you can delete from a single partition without specifying the partition criteria in the delete statement. This in effect turns partitioning back into DIY partitioning i.e. separate tables, union all and pretend its a single logical table using a view. But backwards.
So to do what you want you just assume the partitions are separate tables, and then use union all to glue the ones you want back together.
select * from sales partition (sales_q1_2000)
union all
select * from sales partition (sales_q1_2001)
union all
select * from sales partition (sales_q1_2003)
union all
select * from sales partition (sales_q1_2004);It probably goes without saying that as well as making the expensive version of partitioning behave like the free alternative, there is the possibility that it will perform like it as well.

The internet browser with more thane one video running is keep crashing after installing Adobe flash.

If I run any website contains more than one video like this website for example :
http://www.neatoxv-21.org ,where it has two videos talking about the cleaning vacuum neato xv-21, and both videos
are running at the same time, then suddenly the explorer will crash, But in other broswers like google chrome it works fine.
To double check, I un-installed the software and then I restarted my computer, I installed the software again but the same issue.
I am using windows 7, so to be sure I missed nothing I updates the windows from Microsoft website and also
I am sure that I have the latest internet explorer update.
Now, the funny thing, I did the same process with Google chrome and it works fine!!!
I am totally confused, wht could be the reason??
Please advice..

Update - I've now tested this with different internet connections, different computers and different operating systems. I've also just received a response from my internet service provider who said:
"I've tested in Firefox, and it looks as if the buttons are crashing the browsers' flash plugin. This being the case, it is not going to be anything related to your computer, the internet connection, or the web server.
In all likelihood, it will be an issue with how the flash tour is coded, which I presume is created automatically by the Tourweaver package you mention. You will need to pursue their support for advice on this problem as it is something with the flash file)s( which isn't working correctly."
So, hopefully Easypano support will be able to fix the problem. Obviously no connection at all with Adobe After Effects

Is there a way to put an item under more than one calendar at the same time?

I use the calendar to keep track of not only my schedule, but my entire family's. For years I had a calendar labeled 'kids.' Now as they're getting older it would be easier to have an individual calendar for each child. Easier for me to track where they are and they could have they're own calendar on their iphone or iphone touch since we all share one cloud account. However, frequently more than one is at the same activity. The calendar program will only allow me to select one calendar to place an event under; as soon as I select another, it deselects the first. Is there a way to place an event under more than one calendar?
(Since I'm still the one driving that needs to know date, time, place, etc type details I don't want them adding it to their own schedule - maybe - on their devides and synching through cloud)

You can create many calendars. Here's the tip:
Example: you have 1 son and 1 daughter.
In iCloud ( https://www.icloud.com )
Create 1 calendar called Son ( Choose a color to tell them apart )
Create 1 calendar called Daughter ( Ditto )
Create 1 calendar called Kids
Since you are the creator, you get to see all calendars combined.
Send invitations to each of them
Son gets Son and Kids calendars
Daughter gets Daughter and Kids calendars
So if there an event for Son, just put in that calendar
If it's for both then enter it in the Kids calendar
Likewise for daughter.

How can I maintain more than one contact person for a supplier

Hi
As per our business requirement , How can I maintain more than one contact person for a single supplier in SRM?
How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier.
we are in SRM 7, and currently we are creating contact person throug customised BDC.
please advice.
Thanks & Regards
NITIN
Edited by: nitinkk on Sep 9, 2011 10:22 AM

Dear Yaniv,
Thanks for your information,
I am able to create users But my problem is How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier ? Is there any kind of maping is available for the user/ contact person to the supplier no.??
Thanks & Regard
NITIN

More than one library (on the same computer) open?

In the new iTunes 9 it is possible to access several libraries on my home network from the open iTunes window, which is really cool. I wondered if this means it may now be possible to have access to several libraries on the same computer (or connected drives) at the same time. I use 3 different libraries on my work PC and my mac at home and the process of shutting down iTunes, holding down shift/option, reopening itunes, selecting library is rather cumbersome. Having each of the libraries accessible the same way they are for other libraries on the network would be really useful.
Is it possible?

pajagsfan wrote:
Can I create more than one library on the same computer? Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her. When I deleted my albums from her library the disappeared from mine. (I think?)
I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library. See if the files are elsewhere on your hard drive, or in the Recycle Bin. When you find them, get them back into your own library. Now you are ready to help your wife.
As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly. It is better to set her up with her own Windows user account. She can have her own iTunes library there.
Get a copy of your entire iTunes folder to start her off. She can delete stuff she doesn't want without messing you up.

Can i create more than one library on the same computer?

Can I create more than one library on the same computer? Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her. When I deleted my albums from her library the disappeared from mine. (I think?)

pajagsfan wrote:
Can I create more than one library on the same computer? Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her. When I deleted my albums from her library the disappeared from mine. (I think?)
I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library. See if the files are elsewhere on your hard drive, or in the Recycle Bin. When you find them, get them back into your own library. Now you are ready to help your wife.
As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly. It is better to set her up with her own Windows user account. She can have her own iTunes library there.
Get a copy of your entire iTunes folder to start her off. She can delete stuff she doesn't want without messing you up.

Drill down more than one characteristic at the same time.

Hi,
Is there any way to drill down more than one characteristic at the same time?
When I drill down by 0cust_sales I would like to have drilled down: division/distrchan/salesorg/cust_sales without having to do that one by one.
thank you!

Hi,
This cannot be done unless these characterstics are related to each other in some way as Charactertics & Display Attributes.
The reason being when you drill down the 0cust_sales , there is no link from 0Cust_sales to the other characterstics hence there is no prompt for these characterstics to be drilled down.
However, a smiliar thing might be acheived by adding these chareacterstics into the 0cust_sales in teh query designer by dragging n dropping them over 0cust_sales. you can try this and see if this is close to your requiremetn.
Kind Regards,
Tapish

More than one reports at the same time?

Hello
Is there any way that i can call more than one reports at the same time through the .FMX file. At the moment i can call only one report, if i need to call another report then i have to close the 1st report, then it will show me the 2nd report. Report Background Engine can run more than one reports at the same time?
Nametullah kalair

Yes i know, we can submit multiple - asynchronous- jobs, but the problem is, is not possible to open more than one previewer to see multiple reports at the same time for analysis.
Regards,
Nametullah kalair

More than one video effect for same clip?

Similar Messages

Maybe you are looking for