More Then One Dimm and Pc fall....

Hello i need help gyus ,
Ok i have Msi 645 Max-E and the problem is when i try to add more Ram then he
gives Me the BSOD or he just freeze or just reset me and i try to switch PSU and try more Diffrent ram and still same problem the board only work with one stick of ram and two sticks he gives me the problems what do u suggest ??? any bios updates will help ?? should i try ?? well any ideas il precciate thanks ////
SIS 645DX Max-E

Assaf well the Timing i tried to lower them but same pro pc give the same BSOD
and restart .....
But what i did do maybe u meen that i was lower the frequency from 333 to 266
and the pc load windows smoodly so the pro was that my board couldent work with 333 with two sticks and its work good with one stick on 333 ......
so thanks for ur help
êÕÓÔ Ð× éÜÙ ÐêÔ ×ÞÕÓ ÐêÔ

Similar Messages

Returning more then one row and changing to selecting by moditifcation date

i've adapted the query below from an older one, it has to return one result and the subquerys are there to make sure it does not just return a number but a string with a bit more meaning, I also have to change it now so that it selects on the last 5 updated records, and there is a mod date I could use for that. But I still have to figure out how. Any help is welcome.
select * from ( SELECT ticketid,
applicatiecd,
categorieid,
substr(titel,1, 200)||' ...'
klantprioriteitid,
interneprioriteitid,
( select g.voornaam||' '||g.naam
from gebruiker g, ticket t
where g.gebruikerid = t.gebruikerid
and t.applicatiecd = NVL(:P0_APPLICATIECD,:F101_APPLICATIECD)) "aangemaakt door",
( select s.statusdefoms "status"
from status s, ticket t
where s.statusid = t.statusid
and t.APPLICATIECD = NVL(:P0_APPLICATIECD,:F101_APPLICATIECD)) "status",
versieid,
row_number() over (order by ticketid desc) rn
FROM ticket where applicatiecd = NVL(:P0_APPLICATIECD,:F101_APPLICATIECD) ) where rn <= 5;

corrected query, should work:
select * from ( SELECT ticketid,
            applicatiecd,
            categorieid,
            substr(titel,1, 200)||' ...'
            klantprioriteitid,
            interneprioriteitid,
            ( select g.voornaam||' '||g.naam
                from gebruiker g
                where g.gebruikerid = t.gebruikerid
                and t.applicatiecd = NVL(:P0_APPLICATIECD,:F101_APPLICATIECD)) "aangemaakt door",
            ( select s.statusdefoms "status"
                from status s
                where s.statusid = t.statusid
                and t.APPLICATIECD = NVL(:P0_APPLICATIECD,:F101_APPLICATIECD)) "status",
            versieid,
            row_number() over (order by ticketid desc) rn
FROM ticket t
where applicatiecd = NVL(:P0_APPLICATIECD,:F101_APPLICATIECD)     )
where rn <= 5;

MERGING AND SYNCING more then one audio and video clip?

Is there are way to select a bin of video clips and a bin of audio clips (DSLR with separate audio) and have Premiere analyze and sync them in batches like Avid. I have a mountain of audio and video clips, but with no rhyme or reason to the file name, no timecode, no slates, just waveforms. But without knowing which audio files go with which video files, it’s impossible (or least time-consuming).
Or do I have to use plural eyes or other synchronising program for doing that?
THanks.

Do the video clips have audio. That is, are you seeking to match A/V clips with audio-only clips? If so, then Premiere can do that. Select all the clips in both bins, right-click & select Create Multicam Source Sequence, and select Sync by Audio.
Whenever Premiere finds that two or more clips match each other but no others in the batch, it creates a multicam source sequence of just those clips.

Hdiutil and creation of more then one partition in a dmg and sparse image?

Hello,
My main question,
after reading the man page and googling, I can't find any way to create a DMG file with more then one partition. Is this even possible?
My finaly goal is to attach those with -mountRandom and - nobrowse from inside a cocoa.app.
I need the return value to get the random path to those partitions.
hdiutil attach test.dmg -mountrandom /Users/dev/Desktop/testdmg
/dev/disk7 GUIDpartitionscheme
/dev/disk7s1 Apple_HFS /Users/dev/Desktop/testdmg/dmg.A43MrA
But I see that when I use a mutli partition dmg ( here simulated ) I will have to look for one or more random paths, something like this.
hdiutil attach test.dmg -mountrandom /Users/dev/Desktop/testdmg
/dev/disk7 Applepartitionscheme
/dev/disk7s1 Applepartitionmap
/dev/disk7s2 Apple_HFS /Users/dev/Desktop/testdmg/dmg.A43MrA
/dev/disk7s3 Apple_HFS /Users/dev/Desktop/testdmg/dmg.7IaUpK
What is the best way?
to grep a line wich contains '/dmg./ and then awk print $3 ?
path=/Users/dev/Desktop
hdiutil attach $path/test.dmg -mountrandom $path/testdmg | grep '/dmg.' | awk '{ print $3 }'
but what when I attach f.e a sparse image not using the -mountRandom, then I have no '/dmg.' just volumes?
Is that doable in one universal piece of code?

I can only answer your question re:multi partition on a .dmg with:
doug-penningtons-power-mac-g4:Desktop dougp$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: Applepartitionscheme *57.3 Gi disk0
1: Applepartitionmap 31.5 Ki disk0s1
2: Apple_Driver43 28.0 Ki disk0s2
3: Apple_Driver43 28.0 Ki disk0s3
4: AppleDriverATA 28.0 Ki disk0s4
5: AppleDriverATA 28.0 Ki disk0s5
6: Apple_FWDriver 256.0 Ki disk0s6
7: AppleDriverIOKit 256.0 Ki disk0s7
8: Apple_Patches 256.0 Ki disk0s8
9: Apple_HFS Joe 57.1 Gi disk0s10
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Applepartitionscheme *10.0 Mi disk1
1: Applepartitionmap 31.5 Ki disk1s1
2: Apple_HFS me 10.0 Mi disk1s2
doug-penningtons-power-mac-g4:Desktop dougp$ diskutil partitionDisk disk1 2 HFS+ leroy 5M HFS+ madge 5M
Started partitioning on disk disk1
Creating partition map
Formatting disk1s2 as Mac OS Extended with name leroy
Formatting disk1s3 as Mac OS Extended with name madge
[ + 0%..10%..20%..30%..40%..50%..60%..70%..80%..90%..100% ]
Finished partitioning on disk disk1
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Applepartitionscheme *10.0 Mi disk1
1: Applepartitionmap 31.5 Ki disk1s1
2: Apple_HFS leroy 5.0 Mi disk1s2
3: Apple_HFS madge 5.0 Mi disk1s3
Message was edited by: doug pennington

Common diemsions and more then one fact table join problem

Hi,
I have 5 common dimension and 3 fact table which in the same subject area. When I want to display results from more then one fact table sending database then query more then one and I think BI server join this two different result on OBI server. But I think if obi server sending database query for exp. WITH SAWITH0 .... the results get effective.
+++002002:2ea0000:2ea000f:----2009/03/14 10:12:59
-------------------- SQL Request:
SET VARIABLE QUERY_SRC_CD='Report';SELECT "- Common Dimensions"."Year Month" saw_0, "- Subs. Tariff"."Subscriber Current Tariff Type" saw_1, "- Common Measures".Arpu saw_2, "- Common Measures"."Gross Margin" saw_3, "- Call Out"."Callout Dur" saw_4, "- Case".Case_Info_Num saw_5 FROM "CUSTOMER PROFILING" WHERE ("- Common Dimensions"."Year Month" = 200901) AND ("- Subs. Tariff"."Subscriber Current Tariff Type" = 'PREPAID') ORDER BY saw_0, saw_1
+++002002:2ea0000:2ea000f:----2009/03/14 10:12:59
-------------------- General Query Info:
Repository: Star, Subject Area: CUSTOMER PROFILING REV, Presentation: CUSTOMER PROFILING
+++002002:2ea0000:2ea000f:----2009/03/14 10:13:00
-------------------- Sending query to database named CENTRAVEA (id: <<471777>>):
select T223282.DIM_TIME_MONTH_ID as c1,
T221204.DIM_SUBS_CURRENT_TARIFF_TYPE as c2,
avg(T223490.FACT_CP_ARPU) as c3,
sum(T223490.FACT_CP_GROSS_MARGIN) as c4,
sum(T223490.FACT_CP_CO_DUR) as c5
from
DM.DIM_SUBSCRIBER T221204 /* A_DIM_SUBSCRIBER */ ,
DM.DIM_TIME_MONTH T223282 /* A_DIM_TIME_MONTH */ ,
DM.FACT_CUST_PROFILING_PART3 T223490 /* A_FACT_CUST_PROFILING_PART3 */
where ( T221204.DIM_SUBS_ID = T223490.DIM_SUBS_ID and T221204.DIM_SUBS_CURRENT_TARIFF_TYPE = 'PREPAID' and T223282.DIM_TIME_MONTH_ID = T223490.DIM_TIME_MONTH_ID and T223282.DIM_TIME_MONTH_ID = 200901 and T223490.DIM_TIME_MONTH_ID = 200901 )
group by T221204.DIM_SUBS_CURRENT_TARIFF_TYPE, T223282.DIM_TIME_MONTH_ID
order by c1, c2
+++002002:2ea0000:2ea000f:----2009/03/14 10:13:00
-------------------- Sending query to database named CENTRAVEA (id: <<471881>>):
select T223282.DIM_TIME_MONTH_ID as c1,
T221204.DIM_SUBS_CURRENT_TARIFF_TYPE as c2,
sum(T223294.FACT_CP_CASE_INFO_NO) as c3
from
DM.DIM_SUBSCRIBER T221204 /* A_DIM_SUBSCRIBER */ ,
DM.DIM_TIME_MONTH T223282 /* A_DIM_TIME_MONTH */ ,
DM.FACT_CUST_PROFILING_PART1 T223294 /* A_FACT_CUST_PROFILING_PART1 */
where ( T221204.DIM_SUBS_ID = T223294.DIM_SUBS_ID and T221204.DIM_SUBS_CURRENT_TARIFF_TYPE = 'PREPAID' and T223282.DIM_TIME_MONTH_ID = T223294.DIM_TIME_MONTH_ID and T223282.DIM_TIME_MONTH_ID = 200901 and T223294.DIM_TIME_MONTH_ID = 200901 )
group by T221204.DIM_SUBS_CURRENT_TARIFF_TYPE, T223282.DIM_TIME_MONTH_ID
order by c1, c2
I have another subject area and which defined like this subject area contain two dimension and 5 fact table. If I want to display results on this subject area I can see best sql for my database
My problem is why this two different subject areas create different queries. I think following query is the best for database.
Thanks for your help
+++002002:2ea0000:2ea0015:----2009/03/14 10:30:06
-------------------- SQL Request:
SET VARIABLE QUERY_SRC_CD='Report';SELECT "Dim - Segments"."Marketing Segment" saw_0, "Fact - Campaign Response"."Fact Campaign Award Amount" saw_1, "Fact - Customer Interaction"."Issue Response Cost" saw_2 FROM "AVEA ALL" ORDER BY saw_0
+++002002:2ea0000:2ea0015:----2009/03/14 10:30:06
-------------------- General Query Info:
Repository: Star, Subject Area: AVEA ALL, Presentation: AVEA ALL
+++002002:2ea0000:2ea0015:----2009/03/14 10:30:06
-------------------- Sending query to database named AVEA ALL (id: <<474694>>):
WITH
SAWITH0 AS (select sum(T51461.FACT_CMPGN_AWARD_AMOUNT) as c1,
T49384.DIM_MARKETING_SGMNT_DESC as c2
from
DM.DIM_MARKETING_SEGMENT T49384 /* DIM_BI_MARKETING_SEGMENT */ ,
DM.FACT_CMPGN_RESPONSE T51461 /* FACT_BI_CMPGN_RESPONSE */
where ( T49384.DIM_MARKETING_SGMNT_ID = T51461.DIM_MARKETING_SGMNT_ID )
group by T49384.DIM_MARKETING_SGMNT_DESC),
SAWITH1 AS (select sum(T51503.FACT_CUST_INT_ISSUE_RES_COST) as c1,
T49384.DIM_MARKETING_SGMNT_DESC as c2
from
DM.DIM_MARKETING_SEGMENT T49384 /* DIM_BI_MARKETING_SEGMENT */ ,
DM.FACT_CUST_INTERACTN T51503 /* FACT_BI_CUST_INTERACTN */
where ( T49384.DIM_MARKETING_SGMNT_ID = T51503.DIM_MARKETING_SGMNT_ID )
group by T49384.DIM_MARKETING_SGMNT_DESC)
select distinct case when SAWITH0.c2 is not null then SAWITH0.c2 when SAWITH1.c2 is not null then SAWITH1.c2 end as c1,
SAWITH0.c1 as c2,
SAWITH1.c1 as c3
from
SAWITH0 full outer join SAWITH1 On SAWITH0.c2 = SAWITH1.c2
order by c1

I find solution on Oracle® Business Intelligence Suite Enterprise Edition Release Notes.
If you use a version of Oracle Database 10g Release 2 prior to 10.2.0.3, then you might encounter an issue with a Full Outer Join that causes severe database performance issues and appears to hang the database when the Oracle BI Server sends to the database SQL queries that include WITH clauses.
To work around this issue when using Oracle Database 10g Release 1 or 2, upgrade to Oracle Database 10g Release 2 Patch Set 2 (for 10.2.0.3). For performance reasons, this is the preferred workaround.
To work around this issue without installing Patch Set 2, modify the Database Features table using the Administration Tool. This configuration prevents the Oracle BI Server from sending SQL constructs that expose the issue in an unpatched Oracle Database 10g.
To modify the Database Features table:
In the Administration Tool, open the properties of the Physical Database metadata object.
Navigate to the Features tab.
Ensure the values for the PERF_PREFER_MINIMAL_WITH_USAGE and PERF_PREFER_INTERNAL_STITCH_JOIN entries are selected, that is, set to True.

I downloaded Adobe Acrobat X in 2010 and then a few years later I got a new computer and I would like to install the Adobe Acrobat X on my new computer but I cannot tell if I had more than one license and my Adobe account is not showing that I ever downlo

I downloaded Adobe Acrobat X in 2010 and then a few years later I got a new computer and I would like to install the Adobe Acrobat X on my new computer but I cannot tell if I had more than one license and my Adobe account is not showing that I ever downloaded or ordered anything. Can you assist?

Download/install it from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html and activate it with your serial number.

Find and Replace more then one character

Hi
I need to find and replace more then one character. for example: I need to replace "A" with "a". "B" with "b" and so on. how to do that in one search?

See the following script by Peter Kahrel:
Change case
http://www.kahrel.plus.com/indesign/grep_change_case.html
If the "A" and the "B" are in arbitrary positions in your text you could use the following GREP:
[AB]
together with the script.
For testing your GREP expressions, you could use the following script, also by Peter Kahrel:
A GREP editor
http://www.kahrel.plus.com/indesign/grep_editor.html
Uwe

I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!

I have a mac book pro and when I turned on iChat it would not let me video chat with more then one person even though I was able to in the past. It only showed an icon to video chat with one person. Please help!!!! ASAP

Hi,
Check the iChat Menu > Preferences > Video Section > Bandwidth setting.
iChat needs to see a Minimum of 128kbps to do 1-1 chats in Video
For 3 and 4 way chats it needs 384kbps
Set the Bandwidth to 500kbps if it is set lower.
Also check the speed you are getting from your Internet supplier.
9:28 PM Thursday; February 23, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Can more then one ipod be stored/updated and dowloaded on itunes

can more then one ipod be stored/updated and dowloaded on itunes

yes per How to use multiple iPods, iPads, or iPhones with ... - Support - Apple

Attaching and sending more then one picture in an email

Is there a way to attach more then one picture at a time in one email?
I use gmail as my default email on my phone.

Since you have to email from the photos application and have to email from a single picture, you can only send one picture at a time.

OVI and syncing and having more then one phone

I recently just upgraded my wife and my phones to Nokia 6350's, after backing up all my contacts and everything in Nokia's PC suite from the old phones and after activating the phones and restoring the back up to the new phones I saw there was an update suggestion to the PC suite which was OVI.
I thought great maybe more function Etc..
After downloading and finally figuring out how to put my phone number in in international format, I get it registered logging into my wife's phone first, from inside the app, I added my phone to it, but it didn't as me for the phone number or anything, but allowed me to change from one phone to the other, well when I hit the sync button for my phone it connected to my phone then added all my contacts to the existing contacts of my wife's, what I didn't relies at first it also put all my wife's contacts into my phone book on my phone, this is a major bug that shouldn't be allowed, Why would I want my wife's contacts in my phone???
Well lucky for me since I had just backed up all my contacts separately,
I closed out OVI and started PC Suite up, I wiped out my whole contacts and reloaded them from back up,
What I can't figure out is why would they design their program like this that doesn't seen to allow you to manage multiple phones from the same program,
Nokia's PC suite does this part great, as it keeps each phone totally separately.
The other thing I don't care for is that OVI seems to depend on having an internet connection, which there are people out there that would like to manage their phones without having to have this, PC suite can be used without a internet connection.
Does anyone have any idea on how to separately manage more then one phone in OVI?

Set up a user account in Windows for your wife on the same computer and when syncing her phone set up and run Ovi Suite from that account.
It is easy and once one gets used to it it gives great flexibility.
This is not just a Nokia thing but quite a normal way of managing multiple devices for multiple users in Windows applications (e.g. we use an application that remote controls multiple telecommunications devices for multiple users and it manages them in that same way except it goes further and requires a separate account for each device as well as each user).

Crashing - Freeze when trying to export more then one project in compressor

when i set more then one final cut project to convert a DVCPRo HD project to DVD media or quicktime during the first batch project the system freezes. I used to be able to do multiple
projects over night or the weekend and now i have to do one at a time.
THOUGHTS???
here is the error message received:
panic(cpu 0 caller 0x0019A566): interlock timeout for mutex 0x806e808
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x4885bdb8 : 0x128d08 (0x3cb134 0x4885bddc 0x131de5 0x0)
0x4885bdf8 : 0x19a566 (0x3d0020 0x806e808 0x257eef8 0x1d18a0)
0x4885be28 : 0x197e97 (0x806e808 0x206 0x4885be58 0x32fd40)
0x4885be38 : 0x32fd40 (0x806e808 0x1 0x7a2220c 0x7464ce4)
0x4885be58 : 0x3319fa (0x7fca320 0x10 0x0 0x32cfd8)
0x4885bea8 : 0x33bbb3 (0x85c5bb8 0x2 0x714c290 0x85c5d70)
0x4885bef8 : 0x33be49 (0x85c5bb8 0x1 0x4885bf28 0x32d034)
0x4885bf28 : 0x33bfd1 (0x85c5bb8 0x1 0x85c5bb8 0x1)
0x4885bf58 : 0x379e23 (0x85c5bb8 0x7fc5e70 0x7fc5eb4 0x0)
0x4885bfc8 : 0x19b17e (0x7d0e200 0x0 0x19e0b5 0x7d10b20) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb0638d68
Kernel version:
Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386
Model: MacPro1,1, BootROM MP11.005C.B04, 4 processors, Dual-Core Intel Xeon, 3 GHz, 4 GB
Graphics: ATI Radeon X1900 XT, ATY,RadeonX1900, PCIe, 512 MB
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 667 MHz
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-4
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-4
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-3
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-3
PCI Card: ATY,RadeonX1900, Display, Slot-1
Serial ATA Device: Hitachi HDS725050KLA360, 465.76 GB
Parallel ATA Device: SONY DVD RW DW-D150A
Fibre Channel Device: SCSI Target Device @ 0
Fibre Channel Device: SCSI Target Device @ 0
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Microsoft Basic Optical Mouse v2.0, Microsoft, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
FireWire Device: built-in_hub, unknown_value, Unknown

no. I just tried compressing 2 HD projects to dvd last night and half way through the first it appears the system crashed.
the crash report is as follows -
I did the update - same issue PLEASE ANYONE HELP????????
THANKS
panic(cpu 3 caller 0x0019A566): interlock timeout for mutex 0x70dff78
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x487abce8 : 0x128d08 (0x3cb134 0x487abd0c 0x131de5 0x0)
0x487abd28 : 0x19a566 (0x3d0020 0x70dff78 0x16 0x70defa4)
0x487abd58 : 0x197e97 (0x70dff78 0x206 0x487abdf8 0x331d2f)
0x487abd68 : 0x331d2f (0x70dff78 0x7ba1dac 0x12f572 0x0)
0x487abdf8 : 0x331fad (0x7bd5920 0x70dff44 0x7ba1dac 0x320995)
0x487abe38 : 0x339531 (0x7ba1dac 0x8 0x0 0x58b4a000)
0x487abec8 : 0x13b4f4 (0x7ba1dac 0x1 0x487abef8 0x199ef1)
0x487abef8 : 0x13cd1a (0xc26b360 0x0 0x487abf28 0x1a3010)
0x487abf38 : 0x13cb77 (0xc26b380 0xc26b0d8 0xc3f269c 0xc3f2658)
0x487abf78 : 0x127406 (0x1 0x0 0x1 0x14)
0x487abfa8 : 0x1a2f8d (0xffffffff 0x1 0x0 0xc3eebc0)
0x487abfc8 : 0x19ad06 (0x0 0x1 0x19e0b5 0xc3eebc0) Backtrace terminated-invalid frame pointer 0x487abf58
Kernel version:
Darwin Kernel Version 8.9.1: Thu Feb 22 20:55:00 PST 2007; root:xnu-792.18.15~1/RELEASE_I386
Model: MacPro1,1, BootROM MP11.005C.B04, 4 processors, Dual-Core Intel Xeon, 3 GHz, 4 GB
Graphics: ATI Radeon X1900 XT, ATY,RadeonX1900, PCIe, 512 MB
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 1, 1 GB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 2, 1 GB, DDR2 FB-DIMM, 667 MHz
Network Service: Built-in Ethernet 1, Ethernet, en0
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-4
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-4
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-3
PCI Card: pci-bridge, sppci_pci2pcibridge, Slot-3
PCI Card: ATY,RadeonX1900, Display, Slot-1
Serial ATA Device: Hitachi HDS725050KLA360, 465.76 GB
Parallel ATA Device: SONY DVD RW DW-D150A
Fibre Channel Device: SCSI Target Device @ 0
Fibre Channel Device: SCSI Target Device @ 0
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Microsoft Basic Optical Mouse v2.0, Microsoft, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
FireWire Device: built-in_hub, unknown_value, Unknown
FireWire Device: unknown_device, unknown_value, Unknown

How do I get the text to flow throughout more then one page.

Hello,
I am currently using LiveCycke Designer to create a scholarship for my company. I created fields for the form and I would like to insert a text to describe the scholarship. When I insert the text, it doesn't flow onto the next page. I've tried creating a subform and clicking "flowed" and "allow page breaks within content". I also clicked auto-fit for the height, but it just makes a line. For the text box, I've clicked "Expand to fit on the height". It is also a dynamic XML Form. Is there anything else I should be doing?
I could always send the file to someone to see if they can figure it out.
Thank you,
Natalie

Thank you so much !
but the link doesn't seem to work. It says that the URL is not in the correct format for an Acrobat.com document link.
Natalie
Date: Wed, 12 May 2010 07:53:12 -0600
From: [email protected]
To: [email protected]
Subject: How do I get the text to flow throughout more then one page.
Here is the corrected form..Even you you set the Subform type to "Flowed" to the subform where the Text box resides, you did not set the Page1 to Flowed (which is the key)..But when I make the Page1 type to "Flowed", all your fields above the Scholrship text boxes' Subform will go one below another.. To fix this, first I have select all the fields and wrap them into a subform and then set the Page1 to Flowed..
https://acrobat.com/#d=XQ1yfV8fCk85M7sRLD*-gg
Thanks
Srini
>

How can I restrict more then one user to access the table?

Hi !
I have a problem and two solutions and I am a bit confused as to
which one is the best one and/or can there be any better way of
handling the problem ?
Problem : I have to update a key field of a table when I update
it in the form 5.0 screen. I am basically doing a maintenance of
a table and if a certain field is updated then the change has to
be reflected in two more tables. But the issue is that the field
is a part of the key in those two tables. So all I can think of
is that I need to insert new set or rows for that new value of
the field and delete the old set of records for old values of
the field.
There are two ways of doing it;
1.One option can be to explicitely define two cursors separately
and fetch the values in them one by one and then insert the new
records and then delete the old records in both the tables. This
I feel will be a cumbersome process both in terms of processing
time and the coding.
2.Second option I was thinking can be to create two flat tables
(without keys) and insert the values in them and update the
changed field there and then insert the rows in the respective
tables. Delete the old records in the main tables and delets the
records in these flat tables. This is a bit more faster and
easier to predict and code. This seems to be a better option for
me.
Any comments on these ?
In both the cases I was thinking of making some provision so
that more then one person can't update the table simultaneously.
Since if there are more then one persons doing the processing
then some inconsistency might creep into the whole process.
This is easier to do in the second process as if I check the
data in the flat tables and if there is some data then I can
presume that some one is doing the processing and I can ask the
other person to hold for a while. But in this case how can I
stop more then two people to simultaneously check for the empty
table and start inserting the record ?
I was just thinking of having a sepatare table having only one
field and this will be a key field and as the process begins the
process will insert a fix value say 'Y' in the key field and at
the end of the process the record will be deleted and this way
we can restrict the user to access the process more then one at
a time..? Since you can't have same value of the key in a table
more then once.
Any better way of handling it will be deeply appreciated.
How about locking the table at the begining and releasing the
lock at the end ? Will there be any issue in that? since I am
inserting and deleting the rows in the same transaction.
Comments welcome,
Shobhit
null

How about performing the update IN the database using a stored
procedure?
By using non-database fields on your form to get the
information, you can then call the procedure in the database to
perform the updates. If an error occurs in the procedure you
rollback, if necessary, and send a message or status back to the
form. If it succeeds you might wish to commit and then re-
execute the form's query -- using either the original key values
or the new key values...
null

HOW DO I USE MORE THEN ONE ITUNES WITH MY IPHONE WITHOUT ERASING MY MUSIC?

I have two different laptops with iTunes on it. I use both of them but my iPhone only works with one iTunes. I plug it into the computer and it says that my iPhone cannot use more then one iTunes. Is there a way I can use both or no?
YES I AM CLICKING MANUELLY ADD SONGS TO MY iPhone.
I just bought my iPhone about a week or so ago.
Please help ASAP.

I clone my library to a portable drive using SyncToy 2.1, a free tool from MS. I run this both at home & work so that I essentially have three identical copies of my library for backup redundacy, any of which I can use to update my iPods and my iPhone. I use iTunes Folder Watch occasionaly in case I've managed to download, for example, a podcast at one location but overwrite the library with a newer copy updated at the other. It can be done but you need to take considerable care...
tt2

More Then One Dimm and Pc fall....

Similar Messages

Maybe you are looking for