More then one player playing the same stream

Hi,
the problem is when i try to send media stream to a multicast server with class D ip address (224.224.224.24) on port 49150
it should multicast the stream to the set of receivers on their ip's and ports.
please suggest me whether multicasting this stream is the job of server (we need to do some networking stuff) or we need to do this by our java code by writing a code that runs on multicast server and transmits the stream to a set of users.
Note
in practical
in my company network i changed my server IP to 224.224.224.24 and tried to run the codes.

You might try:
224.112.112.112 22222
I had a lot of problems getting multicasting working back in the day, but it was because I was using an invalid address.
:-/

Similar Messages

It is possible to open the front panel of a subVI more then one time at the same moment?

I want to open a subvi´s front panel several times with each one operating independently. The subvi has a ring with several variables to choose to show in a graphic. The subvi is called from a button on the Main Front Panel. It is possible to, for instance, open the subvi and set it to show a temperature graphic and click again on the button to call another instance of the same subvi and select pressure for the graphic, keeping both new windows side by side? Will I still be able to access the Main Front Panel?

Yes you can. You have to use a .vit (VI template file). There's an example here. There's also been lot's of discussion on the subject. I think if you do a search for vit, you'll be able to find additional information and examples.

Opening the same form more then one time in the same session

H! I want to accomplish the following .... I have a form that has a button. The code in the when-buttin-pressed trigger is a call_form - to open another form. I want to be able to push this button as many times as the user may want and the form should keep opening a new form. Meaning I can have 10 forms of the second form open if I want. The user basically wants to be able to flip between the data on the same form opening up this form a couple of times in different windows. when I use the call form the button on the initial form is becoming disabled - not allowing me to push it again to open another form without closing the one already open. Please HELP!

Sounds like you need Run_product rather than Call_form.
It will establish multiple database sessions, and the user will be responsible for terminating them. And I am not sure, but this may only be possible in client/server forms.

Search more then one face in the same photo

Hi all
Is there a metod to search all phtotos that contain, for example, "Dug" and "Larry"?
I have tried "Dug AND Larry" or "Dug && Larry" but it doesn't work.
Thank you.

File -> New Smart Album
Set it to "All"
Face -> Is -> Doug
+
Face -> Is -> Larry
Regards
TD

Is there a way to put an item under more than one calendar at the same time?

I use the calendar to keep track of not only my schedule, but my entire family's. For years I had a calendar labeled 'kids.' Now as they're getting older it would be easier to have an individual calendar for each child. Easier for me to track where they are and they could have they're own calendar on their iphone or iphone touch since we all share one cloud account. However, frequently more than one is at the same activity. The calendar program will only allow me to select one calendar to place an event under; as soon as I select another, it deselects the first. Is there a way to place an event under more than one calendar?
(Since I'm still the one driving that needs to know date, time, place, etc type details I don't want them adding it to their own schedule - maybe - on their devides and synching through cloud)

You can create many calendars. Here's the tip:
Example: you have 1 son and 1 daughter.
In iCloud ( https://www.icloud.com )
Create 1 calendar called Son ( Choose a color to tell them apart )
Create 1 calendar called Daughter ( Ditto )
Create 1 calendar called Kids
Since you are the creator, you get to see all calendars combined.
Send invitations to each of them
Son gets Son and Kids calendars
Daughter gets Daughter and Kids calendars
So if there an event for Son, just put in that calendar
If it's for both then enter it in the Kids calendar
Likewise for daughter.

More than one reports at the same time?

Hello
Is there any way that i can call more than one reports at the same time through the .FMX file. At the moment i can call only one report, if i need to call another report then i have to close the 1st report, then it will show me the 2nd report. Report Background Engine can run more than one reports at the same time?
Nametullah kalair

Yes i know, we can submit multiple - asynchronous- jobs, but the problem is, is not possible to open more than one previewer to see multiple reports at the same time for analysis.
Regards,
Nametullah kalair

HT1657 Can you rent more than one movie at the same time?

Can you rent more than one movie at the same time on itunes?

I think Justin is correct and you should have statistics in place and a reasonable partition scheme so that the optimizer selects the correct partitions rather than telling it what to do. You paid a lot for partitioning after all.
There are some, possibly misguided, examples in the manuals showing how to create a view so you can delete from a single partition without specifying the partition criteria in the delete statement. This in effect turns partitioning back into DIY partitioning i.e. separate tables, union all and pretend its a single logical table using a view. But backwards.
So to do what you want you just assume the partitions are separate tables, and then use union all to glue the ones you want back together.
select * from sales partition (sales_q1_2000)
union all
select * from sales partition (sales_q1_2001)
union all
select * from sales partition (sales_q1_2003)
union all
select * from sales partition (sales_q1_2004);It probably goes without saying that as well as making the expensive version of partitioning behave like the free alternative, there is the possibility that it will perform like it as well.

More then one student license on same account

Hello. Can i have more then one student license on same account. The 60% of thingy. One for home, one for work and one for the notebook. They may run simultaneously because of the friends using the computer. All 3 computers will use same account name and password.

You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each.
If you install on a third computer, it will request you to de-activate on the other two computers. You can then reactivate one of the previous two computers, and use Creative Cloud apps on it.
If you regularly need to use the Creative Cloud on more than two computers then it would be best to purchase an additional subscription. This is the same licensing btw which we have for our prepetual product. An advantage though for Creative Cloud over the perpetual product is that you can install on Mac and Windows with the same subscription!
As it stands, the EULA states that you can install it on up to two computers at a time, however, you cannot use applications on those computers simultaneously. This is the case even when you are not using the same application
http://www.adobe.com/legal/licenses-terms.edu.html
Regards
Rajshree

Add Suppporting Details for more than one periods at the same time for the same Account in Planning.

As we know, in planning form, we can add supporting details to one cell for the level 0 members intersections.
But can we do that as below:
add supporting details for more than one cells at the same time?
I tried to do that in workspace and smartview, neither is working.(my workspace version 11.1.2.2.300.20)
I wonder if i am not with the right version, because i don't know how to get the below.
Can any one explain?
Thank you.

Hi,
I have tried in Smartview for a simple form where my period dimension was in columns and accounts in rows.
You need to select multiple period and select supporting details, it will show those selected period for which you can add the supporting details.
You can add these details and then submit the data in the form.
Regards,
Sourabh

I can not establish more then 1 call at the same time

Hi,
I have SPA9000 with four active accounts. I can not establish more then 1 call at the same time. Accounts are all in registered state. The field in SIP tab, Default Group Line:, is by default: 1,2,3,4 which means if line 1 is busy try the next one in the order ( in this case number 2). But this is not happening. It always tries to dial out with the first line (account). There is no problem with the provider and I don't want to specify groups of userID's and to assign them special line for dialing out.( by the way in this way it is possible to establish more parallel calls, but then each user will always have to dial thru specific line only). Please help me to find out if the SPA is faulty or give me some workaround, so that when I try to make a call , if one line is busy to dial out thru the next available.
P.S. I suspect that SPA9000 does not notice when the line is busy or not. Maybe there is some issue with the Control Timer Values (sec) on Regional tab.
Thanks,

no it can only be one person at a time

Insert more than one contact in the same page/document

Hello,
I have tried without success to insert more than one contact into the same page of a document.
For example, if i insert 2 Address book fields in a page, when i drag a contact from the address book then it populates automatically the 2 fields, and it is impossible to separate these fields and to populate them with 2 different entries (on the same page).
And when you drag more than one contact to Pages, it asks you if you want to create one document per contact.
Would it be possible to just insert 2 or more different contacts on the same page/document ?
Thanks in advance for any help,
Fred.

Unfortunately, this can't be done with Pages, nor could it be done with AppleWorks. I think the assumption is that you would merge into a letter & one letter sent per person. In checking the 3 postcard templates in Pages 3, none of them have address book fields to drop contacts into.
There is a workaround, but it might not be worth the effort. Create your postcard as a single, large document in page layout in landscape & merge to a new document. Then, in the print dialog, choose Layout from the drop-down menu that says Copies & Pages & choose 4 from the Pages per Sheet menu. You might also want to add a hairline border for cut lines.

Color Correction Effect: "Change color to" change more that one color in the same clip(pp Cs4)

Hi all, I have watched and tried some tutorial to achieve this. My question though is how to change more than one color in the same clip. I'm asking because when I tried I had no problem to "color pick" one shade of my (Rock face) and turned it into a natural color picked from a good clip. But I was left with all the other shades to work on and if I repeated the procedure (pick the next destination color to replace) it cancelled my previous change so it seems that I can change only one color... I must be doing something wrong.

Wow! I did play a few other Youtube 3 color correction, but this one is so good and comprehensive. I did also like RGB curves tutorial. I don't know if all this is appropriate for my 1983 VHS clip nearly all green (I probably had the wrong white balance). What I achieved so far is not very good but I think much more watchable than all green! Than You again for this . I do also realise these guys are expert and still they have to use lot trials and errors and various techniques before getting what they want. I do appreciate their generosity to make some of their knowledge available to all of us.

More than one library (on the same computer) open?

In the new iTunes 9 it is possible to access several libraries on my home network from the open iTunes window, which is really cool. I wondered if this means it may now be possible to have access to several libraries on the same computer (or connected drives) at the same time. I use 3 different libraries on my work PC and my mac at home and the process of shutting down iTunes, holding down shift/option, reopening itunes, selecting library is rather cumbersome. Having each of the libraries accessible the same way they are for other libraries on the network would be really useful.
Is it possible?

pajagsfan wrote:
Can I create more than one library on the same computer? Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her. When I deleted my albums from her library the disappeared from mine. (I think?)
I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library. See if the files are elsewhere on your hard drive, or in the Recycle Bin. When you find them, get them back into your own library. Now you are ready to help your wife.
As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly. It is better to set her up with her own Windows user account. She can have her own iTunes library there.
Get a copy of your entire iTunes folder to start her off. She can delete stuff she doesn't want without messing you up.

Can i create more than one library on the same computer?

Can I create more than one library on the same computer? Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her. When I deleted my albums from her library the disappeared from mine. (I think?)

pajagsfan wrote:
Can I create more than one library on the same computer? Just got an ipod for my wife but didn't want her to have to use my library to sync to, so I thought I created another library for her. When I deleted my albums from her library the disappeared from mine. (I think?)
I know it's Valentine's Day, but before you get your wife fixed up the first thing you need to do is recover the deleted albums for your own library. See if the files are elsewhere on your hard drive, or in the Recycle Bin. When you find them, get them back into your own library. Now you are ready to help your wife.
As noted above, you can have two libraries in one Windows user account via the Shift-Start approach, but if you both use your libraries regularly, that becomes annoying quickly. It is better to set her up with her own Windows user account. She can have her own iTunes library there.
Get a copy of your entire iTunes folder to start her off. She can delete stuff she doesn't want without messing you up.

Drill down more than one characteristic at the same time.

Hi,
Is there any way to drill down more than one characteristic at the same time?
When I drill down by 0cust_sales I would like to have drilled down: division/distrchan/salesorg/cust_sales without having to do that one by one.
thank you!

Hi,
This cannot be done unless these characterstics are related to each other in some way as Charactertics & Display Attributes.
The reason being when you drill down the 0cust_sales , there is no link from 0Cust_sales to the other characterstics hence there is no prompt for these characterstics to be drilled down.
However, a smiliar thing might be acheived by adding these chareacterstics into the 0cust_sales in teh query designer by dragging n dropping them over 0cust_sales. you can try this and see if this is close to your requiremetn.
Kind Regards,
Tapish

More then one player playing the same stream

Similar Messages

Maybe you are looking for