More trouble with registering sapccmsr and EYE CATCH error

Hello all,
I saw that this was a topic in an earlier thread. That thread was very helpful for troubleshooting, but it seems I have everything properly set up and patched, but I am still receiving the dreaded EYE CATCH error. The system is a Unicode dual-stack XI system. Here are the details:
sapccm4x registers with no problems.
sapccmsr results in the following:
<b>LE06201:xitadm 160% ./sapccmsr -j2ee -R pf=/sapmnt/XIT/profile/START_DVEBMGS00_LE06201
INFO: CCMS agent sapccmsr working directory is /usr/sap/ccms/XIT_00/sapccmsr
INFO: CCMS agent sapccmsr config file is /usr/sap/ccms/XIT_00/sapccmsr/csmconf
INFO: Central Monitoring System is [XIT]. (found in config file)
INFO: additional Central Monitoring System is [SLM]. (found in config file)
      additional CENTRAL system y/[n] ?   :
INFO: found ini file /usr/sap/ccms/XIT_00/sapccmsr/sapccmsr.ini.
INFO: Checking Distributed Statistical Records Library dsrlib.so
INFO: DSR: Path /usr/sap/ccms/dsr for Distributed Statistical Records.
INFO: checking version an Unicodeness of dsrlib.so
INFO: DSR: Dynamic Library dsrlib.so (version 22) successfully loaded.
INFO:
      CCMS version  20040229, 64 bit, multithreaded, Unicode
      compiled at   Jul  7 2007
      systemid      370 (Solaris on SPARCV9 CPU)
      relno         6400
      patch text    patch collection 2007/4, OSS note 1013331
      patchno       191
      intno         20020600
      running on    LE06201 SunOS 5.9 Generic_122300-02 sun4us
      pid           26318
      profile       /sapmnt/XIT/profile/START_DVEBMGS00_LE06201
ERROR: Cannot open Monitoring Segment 0 rtc = 245
Last reported error: [249]  CCMS monitoring segment has wrong EYE CATCH. It seems to be created as non-unicode segment.
This program runs as unicode. Please use non-unicode version
INFO: dsr: dsrlib unloaded.
EXITING with code 1</b>
Based on the information in the earlier thread, I checked that the files are consistent in their Unicodeness:
<b>LE06201:xitadm 35% pwd
/sapmnt/XIT/exe
LE06201:xitadm 165% sapccm4x -v
      CCMS version  20040229, 64 bit, multithreaded, Unicode
      compiled at   Jul  7 2007
      systemid      370 (Solaris on SPARCV9 CPU)
      relno         6400
      patch text    patch collection 2007/4, OSS note 1013331
      patchno       191
      intno         20020600
      running on    LE06201 SunOS 5.9 Generic_122300-02 sun4us
LE06201:xitadm 166% sapccmsr -v
      CCMS version  20040229, 64 bit, multithreaded, Unicode
      compiled at   Jul  7 2007
      systemid      370 (Solaris on SPARCV9 CPU)
      relno         6400
      patch text    patch collection 2007/4, OSS note 1013331
      patchno       191
      intno         20020600
      running on    LE06201 SunOS 5.9 Generic_122300-02 sun4us
LE06201:xitadm 167% saposcol -v
      SAPOSCOL version  COLL 20.94 640 - V3.73 64Bit, 64 bit, single threaded, Non-Unicode
      compiled at   Jul  7 2007
      systemid      370 (Solaris on SPARCV9 CPU)
      relno         6400
      patch text    COLL 20.94 640 - V3.73 64Bit
      patchno       191
      intno         20020600
      running on    LE06201 SunOS 5.9 Generic_122300-02 sun4us
LE06201:xitadm 107% disp+work -v | more
disp+work information
kernel release                640
kernel make variant           640_REL
DBMS client library           OCI_920
DBSL shared library version   640.00
compiled on                   SunOS 5.8 Generic_117350-38 sun4u
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  Oct 29 2006 21:30:34
update level                  0
patch number                  155
source id                     0.155
supported environment
database (SAP, table SVERS)   610
                              620
                              630
                              640
DBMS server
   ORACLE 9.2.0..
   ORACLE 10.1.0..
   ORACLE 10.2.0..
operating system
SunOS 5.8
SunOS 5.9
SunOS 5.10
LE06201:xitadm 169% pwd
/sapmnt/XIT/exeU
LE06201:xitadm 170% sapccm4x -v
      CCMS version  20040229, 64 bit, multithreaded, Unicode
      compiled at   Jul  7 2007
      systemid      370 (Solaris on SPARCV9 CPU)
      relno         6400
      patch text    patch collection 2007/4, OSS note 1013331
      patchno       191
      intno         20020600
      running on    LE06201 SunOS 5.9 Generic_122300-02 sun4us
LE06201:xitadm 171% sapccmsr -v
      CCMS version  20040229, 64 bit, multithreaded, Unicode
      compiled at   Jul  7 2007
      systemid      370 (Solaris on SPARCV9 CPU)
      relno         6400
      patch text    patch collection 2007/4, OSS note 1013331
      patchno       191
      intno         20020600
      running on    LE06201 SunOS 5.9 Generic_122300-02 sun4us
LE06201:xitadm 172% saposcol -v
      SAPOSCOL version  COLL 20.88 640 - V3.60 64Bit, 64 bit, single threaded, Non-Unicode
      compiled at   Apr 16 2005
      systemid      370 (SUN on SPARC CPU with Solaris 2.2)
      relno         6400
      patch text    COLL 20.88 640 - V3.60 64Bit
      patchno       68
      intno         20020600
      running on    LE06201 SunOS 5.9 Generic_122300-02 sun4us
LE06201:xitadm 111% disp+work -v | more
disp+work information
kernel release                640
kernel make variant           640_REL
DBMS client library           OCI_920
DBSL shared library version   640.00
compiled on                   SunOS 5.8 Generic_117350-38 sun4u
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  Oct 29 2006 21:30:34
update level                  0
patch number                  155
source id                     0.155
supported environment
database (SAP, table SVERS)   610
                              620
                              630
                              640
DBMS server
   ORACLE 9.2.0..
   ORACLE 10.1.0..
   ORACLE 10.2.0..
operating system
SunOS 5.8
SunOS 5.9
SunOS 5.10</b>
Anyone have any ideas why I am unable to register the sapccmsr? Thanks in advance for your help.
Best Regards,
Warren Chirhart

Hi,
I'd just like to make some additional comments.
The issue comes from the "jmon.dll" library which is non-unicode. You have to download the latest SAR archive of the SAP CCMS agents from the Service Marketplace and update your agents as well as your "jmon.dll" library by replacing the EXE and DLL files.
The agent files are located under:
/usr/sap/<SID>/<INSTNACE>/exe
The "jmon.dll" library is located under:
/usr/sap/<SID>/<INSTNACE>/j2ee/os_libs
Most probably you would have to shut down / restart the instance after you update the library so the changes take effect.
You can find the latest SAP CCMS agents SAR archive in SMP under:
https://websmp109.sap-ag.de/swdc
Then browse to:
/SAP Support Packages/SAP Support Packages and Patches/Entry by Application Group/SAP NetWeaver/SAP NETWEAVER/SAP NETWEAVER <version>/Entry by Component/Application Server ABAP/SAP KERNEL <version> <32-BIT | 64-BIT> UNICODE/<OS>/#Database independent/ccmagent_<agent_version>.sar
Hope this helps.
Kind regards,
Rosen

Similar Messages

  • I am feeling so ripped off right now. I have wanted a Mac for years and believed the hype about it's stability and I have had more trouble with this Imac 2011 than I have ever had with a pc. It locks up with several software products from APP store.

    I am feeling so ripped off right now. I have wanted a Mac for years and believed the hype about it's stability and I have had more trouble with this Imac 2011 than I have ever had with a pc. It locks up with several software products from APP store. I have already had to have a technician to look at it and really couldn't figure out what the deal was.  I was told that the APP store software should give me no problems but the truth is that it locks up on the software. This machine is only 4 weeks old and I am using 37 g on a 1 T hard drive. There is no reason for it to be locking up. Also, when I try to use the help program, it always tells me that I am not connected to the internet even though I have used both the mail program and the browser with no problem just before that. I successfully used the help program on my pc lots of times. I did not need a $2000. plus machine to just get email. I just wanted to unload on somebody that might understand my pain and after checking out this site...I think there is a few of you out there.

    I was told that the APP store software should give me no problems but the truth is that it locks up on the software.
    The apps downloaded from the Mac App Store are written by third party developers, not Apple. If you have problems  with those apps you need to visit the support area for their websites. Launch the App Store, locate the app name. You should see a support link.
    when I try to use the help program, it always tells me that I am not connected to the internet even though I have used both the mail program and the browser with no problem just before that
    Go to ~/Library/Preferences. Move the com.apple.helpviewer.plist file from the Preferences folder to the Trash. Restart your Mac, try the Help menu.
    If you need help finding that file, hold down the Finder icon in the Dock then click: New Finder Window. From the menu bar top of your screen click: Go > Go to Folder. Type this in exactly as you see it here:   ~/Library/Preferences/com.apple.helpviewer.plist    That will take you right to that file.
    (.plist) files stores information about a particular app or in this case, the Help viewer. Often times deleting the .plist file resolves the issue.
    It's fine to "unload"... we understand that you expect your iMac to be stable but there are times when things go awry. That's why we have these forums so that you can you get help.
    You may want to read up on how to repair the disk if necessary or reintsall Lion >  OS X Lion: About Lion Recovery
    Apple - Find Out How - Mac Basics
    How to "switch" from PC to Mac >  Apple - Support - Switch 101
    I'm sorry you feel, "ripped off", but you are using the world's most advanced operating system and it may take some time to adjust to a new OS.   http://developer.apple.com/technologies/mac/

  • HELP. 3 years ago I purchased cs3. I had troubles with registering the serial number and used my university's suite instead, and (stupidly) did not sort it out. I am now wanting to subscribe to the online creative cloud with my cs3 discount. Is there any

    HELP. 3 years ago I purchased cs3. I had troubles with registering the serial number and used my university's suite instead, and (stupidly) did not sort it out. I am now wanting to subscribe to the online creative cloud with my cs3 discount. Is there any way to find / prove that I had purchased cs3 and locate a serial number? On my Adobe account it does not show my purchase of cs3 (I am guessing because of the trouble with registering my serial number). I have moved house 3 times since the purchase and am unable to locate the packaging or disk. Is there any way to prove my purchase without any serial number or showing under my Adobe account? Please help! Thanks

    The CS3 discount offer is only for retail online product, it does not include education or volume license purchases. Refer to Terms and Conditions | Adobe
    To check whether you had retail CS3 purchase, we need proof of purchase as well as serial number, without which the issue can not be resolved.
    Regards
    Rajshree

  • Trouble with LaCie disk and time machine

    HI everyone,
    I've been having trouble with using time machine to back-up to my 1 TB LaCie drive (purchased 5/12, unfornuately I was dumb and didn't register the drive and no longer have the box with the serial number and there is no serial number on my drive. The only problem I had up until the end of August was that every so often the LaCie drive (using my FW 800 port) would unmount after waking up from sleep.
    The end of August the drive unmounted for no reason while I was on the computer doing a task. Could not get the LaCie drive remounted (rebooting, etc. etc.) To make a long story short, ended up calling apple care who took me through resetting my SMC and PRAM to no avail. Was booted to higher level of support who walked me through trying to repair my drive using the disk utiltiy. When that didn't work, she walked me through erasing and reformatting the LaCie drive and starting a new time machine back-up. Every thing ok until about ten days ago.
    Last week, when I woke my iMac up from sleep, I got an error saying that the disk was not ejected properly and I could not mount the drive. Restarting did nothing, the disk did not  mount. Shutting down and rebooting seemed to solve the problem and the disk was mounted. Every so often I've had the problem with the disk unmounting after waking up from sleep before. So, I changed my energy sleep preferences. At the end of the day when I am done, I'd unmount the LaCie drive before putting the Mac to sleep using the apple menu.
    Today I came in to start my day, plugged the drive in and it would not mount. Tried rebooting nothing. Went into the disk utility, at first the LaCie drive passed the disk verify (6:26:25 and 6:26:38). Then I went into repair disk on the indented drive at 6:27:13, I wasn't sure what it is was doing, thinking that it had hung, I stopped the repair at 6:27:24. Exited disk utility, and the LaCie drive mounted. But I was getting a read only error when I tried to back-up using time machine. So, I went back into disk utility at 6:27:35, when I verified the disk (indented disk), I got an error saying the disk need to be repaired. After several minutes the disk could not be repaired. So, I erased and reformatted the drive. Ran a time machine back-up and it seemed to back-up everything on my hard drive. Just ran another verify disk and it passed.
    Is the drive failing? Have some other back-ups of my documents, my address book, iCal and am going to make a backup of some of my pref files and important e-mail files and am going to do some more back-ups after I am done.
    Have reached out to the women at apple care whom I talked to last August, but don't expect to hear back from her for at least 24 hours.
    Here is my disk utility log
    2013-11-07 06:26:25 -0500: Verifying partition map for “LaCie”
    2013-11-07 06:26:25 -0500: Starting verification tool:
    2013-11-07 06:26:25 -0500: Checking prerequisites
    2013-11-07 06:26:25 -0500: Checking the partition list
    2013-11-07 06:26:25 -0500: Checking for an EFI system partition
    2013-11-07 06:26:25 -0500: Checking the EFI system partition’s size
    2013-11-07 06:26:25 -0500: Checking the EFI system partition’s file system
    2013-11-07 06:26:25 -0500: Checking all HFS data partition loader spaces
    2013-11-07 06:26:25 -0500: Checking Core Storage Physical Volume partitions
    2013-11-07 06:26:25 -0500: The partition map appears to be OK
    2013-11-07 06:26:25 -0500:
    2013-11-07 06:26:25 -0500:
    2013-11-07 06:26:38 -0500: Verifying partition map for “LaCie”
    2013-11-07 06:26:38 -0500: Starting verification tool:
    2013-11-07 06:26:38 -0500: Checking prerequisites
    2013-11-07 06:26:38 -0500: Checking the partition list
    2013-11-07 06:26:38 -0500: Checking for an EFI system partition
    2013-11-07 06:26:38 -0500: Checking the EFI system partition’s size
    2013-11-07 06:26:38 -0500: Checking the EFI system partition’s file system
    2013-11-07 06:26:38 -0500: Checking all HFS data partition loader spaces
    2013-11-07 06:26:38 -0500: Checking Core Storage Physical Volume partitions
    2013-11-07 06:26:38 -0500: The partition map appears to be OK
    2013-11-07 06:26:38 -0500:
    2013-11-07 06:26:38 -0500:
    2013-11-07 06:27:13 -0500: Disk Utility started.
    2013-11-07 06:27:21 -0500: Verifying and repairing partition map for “LaCie”
    2013-11-07 06:27:21 -0500: Starting repair tool:
    2013-11-07 06:27:21 -0500: Checking prerequisites
    2013-11-07 06:27:21 -0500: Checking the partition list
    2013-11-07 06:27:21 -0500: Checking for an EFI system partition
    2013-11-07 06:27:21 -0500: Checking the EFI system partition’s size
    2013-11-07 06:27:21 -0500: Checking the EFI system partition’s file system
    2013-11-07 06:27:23 -0500: Checking all HFS data partition loader spaces
    2013-11-07 06:27:24 -0500: Reviewing boot support loaders
    2013-11-07 06:27:24 -0500: Checking Core Storage Physical Volume partitions
    2013-11-07 06:27:24 -0500: Updating Windows boot.ini files as required
    2013-11-07 06:27:24 -0500: The partition map appears to be OK
    2013-11-07 06:27:24 -0500:
    2013-11-07 06:27:24 -0500:
    2013-11-07 06:27:35 -0500: Verifying volume “LaCie”
    2013-11-07 06:27:35 -0500: Starting verification tool:
    2013-11-07 06:27:35 -0500: Checking file system2013-11-07 06:27:35 -0500: Error: This disk needs to be repaired. Click Repair Disk.2013-11-07 06:27:35 -0500:
    2013-11-07 06:27:35 -0500: Disk Utility stopped verifying “LaCie”: This disk needs to be repaired. Click Repair Disk.
    2013-11-07 06:28:05 -0500:
    2013-11-07 06:28:13 -0500: Verify and Repair volume “LaCie”
    2013-11-07 06:28:13 -0500: Starting repair tool:
    2013-11-07 06:28:13 -0500: Checking file system2013-11-07 06:28:13 -0500: Volume repair complete.2013-11-07 06:28:13 -0500: Updating boot support partitions for the volume as required.2013-11-07 06:35:05 -0500: Stopped by user
    2013-11-07 06:44:56 -0500: Disk Utility started.
    2013-11-07 06:45:20 -0500: Verifying volume “LaCie”
    2013-11-07 06:45:20 -0500: Starting verification tool:
    2013-11-07 06:45:20 -0500: Checking file system2013-11-07 06:45:20 -0500: Checking Journaled HFS Plus volume.
    2013-11-07 06:45:20 -0500: Checking extents overflow file.
    2013-11-07 06:45:20 -0500: Checking catalog file.
    2013-11-07 06:45:59 -0500: Missing thread record (id = 5057741)
    2013-11-07 06:46:06 -0500: Checking multi-linked files.
    2013-11-07 06:46:19 -0500: Checking catalog hierarchy.
    2013-11-07 06:46:38 -0500: Invalid directory item count
    2013-11-07 06:46:38 -0500: (It should be 0 instead of 4)
    2013-11-07 06:46:38 -0500: Invalid volume directory count
    2013-11-07 06:46:38 -0500: (It should be 166840 instead of 166841)
    2013-11-07 06:46:38 -0500: Checking extended attributes file.
    2013-11-07 06:47:05 -0500: Checking multi-linked directories.
    2013-11-07 06:48:10 -0500: Checking volume bitmap.
    2013-11-07 06:48:12 -0500: Checking volume information.
    2013-11-07 06:48:12 -0500: The volume LaCie was found corrupt and needs to be repaired.
    2013-11-07 06:48:12 -0500: Error: This disk needs to be repaired. Click Repair Disk.2013-11-07 06:48:12 -0500:
    2013-11-07 06:48:12 -0500: Disk Utility stopped verifying “LaCie”: This disk needs to be repaired. Click Repair Disk.
    2013-11-07 06:48:12 -0500:
    2013-11-07 06:50:02 -0500: Verify and Repair volume “LaCie”
    2013-11-07 06:50:02 -0500: Starting repair tool:
    2013-11-07 06:50:02 -0500: Checking file system2013-11-07 06:50:02 -0500: Checking Journaled HFS Plus volume.
    2013-11-07 06:50:02 -0500: Checking extents overflow file.
    2013-11-07 06:50:02 -0500: Checking catalog file.
    2013-11-07 06:50:41 -0500: Missing thread record (id = 5057741)
    2013-11-07 06:50:48 -0500: Checking multi-linked files.
    2013-11-07 06:51:02 -0500: Checking catalog hierarchy.
    2013-11-07 06:51:20 -0500: Invalid directory item count
    2013-11-07 06:51:20 -0500: (It should be 0 instead of 4)
    2013-11-07 06:51:20 -0500: Invalid volume directory count
    2013-11-07 06:51:20 -0500: (It should be 166840 instead of 166841)
    2013-11-07 06:51:20 -0500: Checking extended attributes file.
    2013-11-07 06:51:47 -0500: Checking multi-linked directories.
    2013-11-07 06:52:55 -0500: Checking volume bitmap.
    2013-11-07 06:52:56 -0500: Checking volume information.
    2013-11-07 06:52:56 -0500: Repairing volume.
    2013-11-07 06:52:56 -0500: Missing directory record (id = 5057741)
    2013-11-07 06:52:56 -0500: Look for missing items in lost+found directory.
    2013-11-07 06:53:10 -0500: Rechecking volume.
    2013-11-07 06:53:10 -0500: Checking Journaled HFS Plus volume.
    2013-11-07 06:53:10 -0500: Checking extents overflow file.
    2013-11-07 06:53:10 -0500: Checking catalog file.
    2013-11-07 06:53:16 -0500: Incorrect number of thread records
    2013-11-07 06:53:22 -0500: Checking multi-linked files.
    2013-11-07 06:53:35 -0500: Checking catalog hierarchy.
    2013-11-07 06:53:53 -0500: Invalid directory item count
    2013-11-07 06:53:54 -0500: (It should be 5 instead of 6)
    2013-11-07 06:53:54 -0500: Invalid volume directory count
    2013-11-07 06:53:54 -0500: (It should be 166844 instead of 166842)
    2013-11-07 06:53:54 -0500: Invalid volume file count
    2013-11-07 06:53:54 -0500: (It should be 1056326 instead of 1056321)
    2013-11-07 06:53:54 -0500: Checking extended attributes file.
    2013-11-07 06:54:20 -0500: Checking multi-linked directories.
    2013-11-07 06:55:25 -0500: Checking volume bitmap.
    2013-11-07 06:55:26 -0500: Checking volume information.
    2013-11-07 06:55:26 -0500: Repairing volume.
    2013-11-07 06:58:06 -0500: Rechecking volume.
    2013-11-07 06:58:06 -0500: Checking Journaled HFS Plus volume.
    2013-11-07 06:58:06 -0500: Checking extents overflow file.
    2013-11-07 06:58:07 -0500: Checking catalog file.
    2013-11-07 06:58:12 -0500: Incorrect number of thread records
    2013-11-07 06:58:18 -0500: Checking multi-linked files.
    2013-11-07 06:58:31 -0500: Checking catalog hierarchy.
    2013-11-07 06:58:50 -0500: Invalid volume directory count
    2013-11-07 06:58:50 -0500: (It should be 166844 instead of 166842)
    2013-11-07 06:58:50 -0500: Invalid volume file count
    2013-11-07 06:58:50 -0500: (It should be 1056326 instead of 1056321)
    2013-11-07 06:58:50 -0500: Checking extended attributes file.
    2013-11-07 06:59:17 -0500: Checking multi-linked directories.
    2013-11-07 07:00:22 -0500: Checking volume bitmap.
    2013-11-07 07:00:24 -0500: Checking volume information.
    2013-11-07 07:00:24 -0500: Repairing volume.
    2013-11-07 07:03:03 -0500: Rechecking volume.
    2013-11-07 07:03:03 -0500: Checking Journaled HFS Plus volume.
    2013-11-07 07:03:03 -0500: Checking extents overflow file.
    2013-11-07 07:03:04 -0500: Checking catalog file.
    2013-11-07 07:03:09 -0500: Incorrect number of thread records
    2013-11-07 07:03:15 -0500: Checking multi-linked files.
    2013-11-07 07:03:29 -0500: Checking catalog hierarchy.
    2013-11-07 07:03:47 -0500: Invalid volume directory count
    2013-11-07 07:03:47 -0500: (It should be 166844 instead of 166842)
    2013-11-07 07:03:47 -0500: Invalid volume file count
    2013-11-07 07:03:47 -0500: (It should be 1056326 instead of 1056321)
    2013-11-07 07:03:47 -0500: Checking extended attributes file.
    2013-11-07 07:04:14 -0500: Checking multi-linked directories.
    2013-11-07 07:05:19 -0500: Checking volume bitmap.
    2013-11-07 07:05:20 -0500: Checking volume information.
    2013-11-07 07:05:20 -0500: The volume LaCie could not be repaired after 3 attempts.
    2013-11-07 07:05:21 -0500: Volume repair complete.2013-11-07 07:05:21 -0500: Updating boot support partitions for the volume as required.2013-11-07 07:05:21 -0500: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.2013-11-07 07:05:21 -0500:
    2013-11-07 07:05:21 -0500: Disk Utility stopped repairing “LaCie”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    2013-11-07 07:05:21 -0500:
    2013-11-07 07:09:45 -0500: Disk Utility started.
    2013-11-07 07:11:45 -0500: Preparing to erase : “LaCie”
    2013-11-07 07:11:45 -0500:     Partition Scheme: GUID Partition Table
    2013-11-07 07:11:45 -0500:     1 volume will be erased
    2013-11-07 07:11:45 -0500:         Name        : “LaCie”
    2013-11-07 07:11:45 -0500:         Size        : 999.86 GB
    2013-11-07 07:11:45 -0500:         File system    : Mac OS Extended (Journaled)
    2013-11-07 07:11:45 -0500: Unmounting disk
    2013-11-07 07:11:45 -0500: Erasing
    2013-11-07 07:11:54 -0500: Initialized /dev/rdisk1s2 as a 931 GB HFS Plus volume with a 81920k journal
    2013-11-07 07:11:54 -0500: Mounting disk
    2013-11-07 07:11:54 -0500: Erase complete.
    2013-11-07 07:11:54 -0500:
    2013-11-07 10:38:00 -0500: Disk Utility started.
    2013-11-07 10:38:12 -0500: Verifying volume “LaCie”
    2013-11-07 10:38:12 -0500: Starting verification tool:
    2013-11-07 10:38:14 -0500: Checking file system2013-11-07 10:38:14 -0500: Checking Journaled HFS Plus volume.
    2013-11-07 10:38:14 -0500: Checking extents overflow file.
    2013-11-07 10:38:14 -0500: Checking catalog file.
    2013-11-07 10:38:29 -0500: Checking multi-linked files.
    2013-11-07 10:38:29 -0500: Checking catalog hierarchy.
    2013-11-07 10:38:41 -0500: Checking extended attributes file.
    2013-11-07 10:39:04 -0500: Checking multi-linked directories.
    2013-11-07 10:39:31 -0500: Checking volume bitmap.
    2013-11-07 10:39:32 -0500: Checking volume information.
    2013-11-07 10:39:32 -0500: The volume LaCie appears to be OK.
    2013-11-07 10:39:32 -0500: Repair tool completed:
    2013-11-07 10:39:32 -0500:
    2013-11-07 10:39:32 -0500:

    I just got a call back from the upper level support person at apple care who had been advising me on my trouble with time machine and my LaCie 1 TB FWD. I had sent her much of the same verbiage as I posted here. As some of you have probably figured out, the verdict is that the drive is probably failing. She says this because I have had to do two erase and reformats. She thought that the intermitant problem that I have had with the drive unmounting when my iMac wakes from sleep could be related to the drive failing.
    In the meantime I have a secondary back-up (not using time machine) and the LaCie  1 TB FWD is working for the moment.
    Thanks to all who read all my verbiage.
    And in the meantime, I've learned something. I marked this question as solved. But I'm open to other things to try.
    Message was edited by: njtreehugger minor edits and update

  • Trouble With Opening InDesign and now Photoshop and Illustrator

    First off I apologize if this isn't in the correct section. I couldn't find a section specific to my problem since it involves multiple aspects of Adobe products. I was having trouble with InDesign, it kept crashing. So I followed all of the advice I could find on the forums about deleting the preferences and cache information in the Library folder, and that didn't seem to make a difference. So then I thought maybe it needed an update, so I logged into Adobe Application Manager and sure enough, it did. So I clicked on "download" and it stalled there too. Then the manager became unresponsive. I couldn't cancel the update or log out or anything. So then I saw in the forum someone suggested the Adobe Creative Cloud Cleaner Tool if your manager becomes unresponsive. I ran that and then shut my computer off. When I turned it back on, InDesign started working BUT my Photoshop is completely gone from my system (I never messed with it in the first place since I wasn't having any trouble with it.) And the when I tried to click on Illustrator it said "Do you want to begin your trial?" Huh?
    I have had a subscription since 2012, why on earth would it suddenly think that I no longer should have access to these programs? If I log on to my Adobe account it shows my subscription and that it's up to date (last payment was April 5, 2015). The versions I was using were the CS versions that I had downloaded directly from Adobe and when I used to have any trouble or when I got a different computer I could just log into my account and then redownload them. They are no longer showing under my products, so I can't figure out what on earth is going on. The website has changed since the last time I downloaded them, so that partly could be me, but I thought they would at least be showing up under products. I contacted Adobe support and the first person I talked to on chat said "this is clearly a technical issue I am transferring you to someone better suited for this," but that's all he said. And I haven't heard from anyone since so I thought I'd make a topic and see if anyone else out there has had a similar problem.

    The versions I am using are the CS6 versions.*

  • Trouble with CCME 4 and VIC2-2FXO; IOS 12.4(9)T

    Trouble with CCME 4 and VIC2-2FXO; IOS 12.4(9)T
    I am having trouble making outgoing call or answering incoming call.
    When I try to call out from my IP 7961 phone, it fails with the message "unknown number".
    For incoming call, it rings but when I pick up the call nothing happens,
    Put the receiver back on hook, the phone carries on ringing. I am in UK
    and just trying to set up test system with one analogue line. Any help will
    be most appreciated. My config of the 2811 router is posted below. All calls ineternally works fine.
    Thank you for your help.
    hostname Test-CME
    ip cef
    no ip dhcp use vrf connected
    ip dhcp excluded-address 10.10.10.1 10.10.10.10
    ip dhcp excluded-address 10.139.139.1 10.139.139.10
    ip dhcp pool host
    network 10.10.10.0 255.255.255.0
    default-router 10.10.10.1
    option 150 ip 10.10.10.1
    ip dhcp pool data
    network 10.139.139.0 255.255.255.0
    default-router 10.139.139.1
    dns-server 10.139.139.5
    voice-card 0
    no dspfarm
    voice service voip
    allow-connections h323 to h323
    allow-connections h323 to sip
    allow-connections sip to h323
    allow-connections sip to sip
    supplementary-service h450.12
    h323
    sip
    header-passing
    registrar server expires max 3600 min 3600
    interface FastEthernet0/1
    no ip address
    no ip mroute-cache
    duplex auto
    speed auto
    no shut
    interface FastEthernet0/1.2
    description ** Data VLAN **
    encapsulation dot1Q 2
    ip address 10.139.139.1 255.255.255.0
    interface FastEthernet0/1.3
    description ** Voice VLAN **
    encapsulation dot1Q 3
    ip address 10.10.10.1 255.255.255.0
    ip http server
    ip http authentication local
    no ip http secure-server
    ip http path flash:
    tftp-server flash:S00104000100.sbn
    tftp-server flash:TERM41.7-0-3-0S.loads
    tftp-server flash:term61.default.loads
    tftp-server flash:term41.default.loads
    tftp-server flash:CVM41.2-0-2-26.sbn
    tftp-server flash:cnu41.2-7-6-26.sbn
    tftp-server flash:Jar41.2-9-2-26.sbn
    tftp-server flash:term70.default.loads
    tftp-server flash:term71.default.loads
    tftp-server flash:cnu70.2-7-6-26.sbn
    tftp-server flash:Jar70.2-9-2-26.sbn
    tftp-server flash:TERM70.7-0-3-0S.loads
    tftp-server flash:CVM70.2-0-2-26.sbn
    control-plane
    voice-port 0/3/0
    connection plar opx 202
    caller-id enable
    dial-peer voice 1 pots
    incoming called-number .
    destination-pattern 9T
    port 0/3/0
    telephony-service
    load 7914 S00104000100
    load 7941 TERM41.7-0-3-0S
    load 7961 TERM41.7-0-3-0S
    load 7970 TERM70.7-0-3-0S
    max-ephones 20
    max-dn 40
    ip source-address 10.10.10.1 port 2000
    calling-number initiator
    service phone videoCapability 1
    system message MKC CME
    url services http://10.10.10.1/voiceview/common/login.do
    url authentication
    http://10.10.10.1/voiceview/authentication/authenticate.do
    time-zone 21
    date-format dd-mm-yy
    voicemail 600
    max-conferences 8 gain -6
    call-forward pattern .T
    call-forward system redirecting-expanded
    moh music-on-hold.au
    web admin system name admin secret 0 test
    dn-webedit
    time-webedit
    transfer-system full-consult dss
    transfer-pattern 9.T
    secondary-dialtone 9
    create cnf-files
    ephone-dn 1 dual-line
    number 201
    label 201
    description Sarah
    name Sarah
    ephone-dn 2 dual-line
    number 202
    label 202
    description Vitthal
    name User2 Vitthal
    ephone-dn 3 dual-line
    number 203 secondary
    label 203
    description Neil
    name User3 Neil
    ephone 1
    video
    username "user1" password 201
    mac-address 0018.18EE.947F
    type 7961 addon 1 7914
    button 1:1
    ephone 2
    video
    username "user2" password 202
    mac-address 0018.18BB.B973
    type 7941
    button 1:2
    ephone 3
    video
    username "user3" password 203
    mac-address 0018.1885.6BA2
    type 7970
    button 1:3

    Hi
    Please find enclosed debug attachment for voice ccapi and ephone. First, I called from outside. Extension 202 rings but when I answered on extension 202 nothing happens. Replace the rceiever and the pone starts ringing again.Second step. I tried to call out by dialing 9 and then number but after a while phone displays unknown number.
    Thank you for your help.
    Vitthal

  • HT1657 I rented Trouble with the Curve and haven't it yet and I when I went to watch the movie it tells me the file can not be found -  please help

    I rented Trouble with the Curve and haven't it yet and I when I went to watch the movie it tells me the file can not be found -  please help

    Yes, thank you.  My apologies, I was typing one handed and did not add that. 
    Anyway, I have tried deleting the cache, deleting my pics and then re-syncing, etc. and nothing is working This is very frustrating, as I had no problems up until about 2 weeks ago, and now all of a sudden, I have this issue......UGH!

  • Having trouble with wav files and sample rates

    Hi ,I am having trouble with wav files and sample rates .I have been sent multiple projects on wav as the main instrumental ; I wish to record in 48.000kHz .Now comes the problem.When I try to change the project to 48k It seems to pitch up the track.I can't have them send the logic/project file as most have outboard synths,different plug ins etc.This particular case the producer has recorded the synth task in 41.000 kHz .My successful outcome would be to be able t create a project file in 48 kHz .And NOT pitch up whne I add the instrumenta wav file .Any help would be gratefully recieved,this is my first post so any mistakes I may have made go easy 

    You'll have to convert the actual synth audio file file that the producer gave you to 48kHz. You can do this in the audio Bin in Logic.

  • I'm having trouble with iTunes synching and accessing the iTunes store.

    I'm having trouble with iTunes synching and accessing the iTunes store.   When synching, the process tops at the back up stage, freezes and I can't close the iTunes window, need to ctrl alt del.   When trying to access the store, the progress bar stops halfway.   I've googled heaps and tried most of the standard answers - unistall, reinstall, etc, now looking for some help please.
    This has only started a few weeks back, after working smoothly for the 2 years of owning the iPhone 3gs.
    Any suggestions will be appreciated, it's getting realy frustrating.
    Cheers for now,
    Marty

    http://support.apple.com/kb/HT1923?viewlocale=en_US
    this worked perfectly for me, with no loss of library! BUT was warned about uninstalling things in the order listed...FYI.

  • Trouble with internal keyboard and touchpad

    Hi,
    Yesterday I just out of nowhere started having some trouble with my keyboard and touchpad on my MacBook Air.
    The problem displayed itself on various ways. One thing was that I couldn't press regulary with the touchpad. When I was pressing one time, it acted like a pressed with two fingers. When I tried to type in my password on the administrator page, some of the keys didn't work at all and some started to act weird. For example when I was pressing the letter B, the "bar" which displayes where you are in the text (don't know the word in English) went backwards, and when I pressed the letter F it went forward. This seemes so weird and also gives me a hope that it might be some setting failure though B stands for backwards and F stands for forward.
    I could log in to the guestpage where I tried to write in "notes". In notes, no letters at all was working, only numbers. When I tried to shut the computer down from the apple symbol I was asked to write administrator name and password. When I tried to mark the name to write it, there wasn't a "bar" but a cross, but on the other hand did it work to write in the password field. But of course not B and F..
    Usualy I'd just press the on/off botton until the computer lockdown, unfortunately the botton doesn't work. So the only thing I could do was to let the battery die and hope that it would start when I recharged it and pressed start, this didn't go as well as I hoped, so now I'm stuck with a dead macbook air.
    Any ideas of what could be the problem or/and any solutions what might do the trick?
    Extremly greatful for any answers

    Yes you need to use a wired keyboard.

  • I am just starting out in graphic design and I wanted to know how to get more involved with either adobe and or graphic design? I am really very interested in working with adobe and graphic design more and becoming more involved with both!!

    I am just starting out in graphic design and I wanted to know how to get more involved with either adobe and or graphic design? I am really very interested in working with adobe and graphic design more and becoming more involved with both!!

    I have now recently downloaded 10.0.2 which is confusing in itself, as, as far as I can ascertain that is actually version 11, but I'm not even sure about that.
    Version 10.0.2 is the newest version and the successor to GarageBand '11 (version 6.0.5).
    The '11 is referring to the iLife '11 suit of multimedia application - the older GarageBand was a part of this bundle.
    Have a look at Edgar's graphical enhanced manuals, the explain very detailed how things work and why. You can buy them as iBooks from the iBook store or directly from the page:
    http://DingDingMusic.com/Manuals/

  • TS3999 Help! Trouble with my calendar and icloud.

    I am having trouble with my calendar and icloud.
    Customers send me meeting invites and I can accept them no problem. But if they subsequently change the date or time I get an error message:
    Access to “appointment name” in “Home” in account “iCloud” is not permitted.
    The server responded:
    “403”
    to operation CalDAVWriteEntityQueueableOperation
    sometimes the time changes in my calendar, sometimes it doesn't, and my customers keep getting messages back from icloud 'accepting' the original date, not the changed date!!
    It is driving me an my clients crazy!  any help would be appreciated.

    I had a problem specific to the Calendar on web-based Firefox (PC) Was asked for a separate sign-in I'd never seen before which didn't work. I resolved this by signing out, signing in again.

  • Trouble with i810, vesa and fbdev being loaded

    There are a few similar treads, but neither solves this problem. They are listed below:
    http://bbs.archlinux.org/viewtopic.php?id=76933
    http://bbs.archlinux.org/viewtopic.php?id=78686
    http://bbs.archlinux.org/viewtopic.php?id=71622
    I'm not using a xorg.conf, hal/dbus are running and I'm using the xf86-video-intel module. There are no other xf86-video-* modules present.
    Below follows my xorg.log:
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.3.901 (1.6.4 RC 1)
    Release Date: 2009-8-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH x86_64
    Current Operating System: Linux svirfneblin 2.6.30-ARCH #1 SMP Tue Sep 8 01:42:10 CEST 2009 x86_64
    Build Date: 04 September 2009 05:45:43PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 8 12:43:46 2009
    (II) Loader magic: 0x1d40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0:0:2:0) 8086:2a02:152d:0769 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
    (--) PCI: (0:0:2:1) 8086:2a03:152d:0769 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0100000/1048576
    (==) Using default built-in configuration (39 lines)
    (==) --- Start of built-in configuration ---
    Section "Device"
    Identifier "Builtin Default intel Device 0"
    Driver "intel"
    EndSection
    Section "Screen"
    Identifier "Builtin Default intel Screen 0"
    Device "Builtin Default intel Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default i810 Device 0"
    Driver "i810"
    EndSection
    Section "Screen"
    Identifier "Builtin Default i810 Screen 0"
    Device "Builtin Default i810 Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default vesa Device 0"
    Driver "vesa"
    EndSection
    Section "Screen"
    Identifier "Builtin Default vesa Screen 0"
    Device "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default fbdev Device 0"
    Driver "fbdev"
    EndSection
    Section "Screen"
    Identifier "Builtin Default fbdev Screen 0"
    Device "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
    Identifier "Builtin Default Layout"
    Screen "Builtin Default intel Screen 0"
    Screen "Builtin Default i810 Screen 0"
    Screen "Builtin Default vesa Screen 0"
    Screen "Builtin Default fbdev Screen 0"
    EndSection
    (==) --- End of built-in configuration ---
    (==) ServerLayout "Builtin Default Layout"
    (**) |-->Screen "Builtin Default intel Screen 0" (0)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default intel Device 0"
    (==) No monitor specified for screen "Builtin Default intel Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default i810 Screen 0" (1)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default i810 Device 0"
    (==) No monitor specified for screen "Builtin Default i810 Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default vesa Screen 0" (2)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default vesa Device 0"
    (==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default fbdev Screen 0" (3)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default fbdev Device 0"
    (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 2.8.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) LoadModule: "i810"
    (WW) Warning, couldn't open module i810
    (II) UnloadModule: "i810"
    (EE) Failed to load module "i810" (module does not exist, 0)
    (II) LoadModule: "vesa"
    (WW) Warning, couldn't open module vesa
    (II) UnloadModule: "vesa"
    (EE) Failed to load module "vesa" (module does not exist, 0)
    (II) LoadModule: "fbdev"
    (WW) Warning, couldn't open module fbdev
    (II) UnloadModule: "fbdev"
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
    965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
    IGDNG_M
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) intel(0): Creating default Display subsection in Screen section
    "Builtin Default intel Screen 0" for depth/fbbpp 24/32
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
    (--) intel(0): Chipset: "965GM"
    (II) intel(0): Output VGA1 has no monitor section
    (II) intel(0): Output LVDS1 has no monitor section
    (II) intel(0): Output VGA1 disconnected
    (II) intel(0): Output LVDS1 connected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS1 using initial mode 1280x800
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) intel(0): [DRI2] Setup complete
    (**) intel(0): Framebuffer compression disabled
    (**) intel(0): Tiling enabled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) UXA(0): Driver registered support for the following operations:
    (II) solid
    (II) copy
    (II) composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): No memory allocations
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder disabled
    (II) intel(0): Set up textured video
    (II) intel(0): direct rendering: DRI2 Enabled
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
    (II) GLX: Initialized DRI2 GL provider for screen 0
    (II) intel(0): Setting screen physical size to 331 x 207
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (II) Synaptics touchpad driver version 1.1.3
    (**) Option "Device" "/dev/input/event6"
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    (II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
    (**) Option "SHMConfig" "true"
    (**) Option "MaxTapMove" "2000"
    (**) Option "VertEdgeScroll" "true"
    (**) Option "VertTwoFingerScroll" "true"
    (**) Option "HorizTwoFingerScroll" "true"
    (**) Option "TapButton1" "1"
    (**) Option "TapButton2" "2"
    (**) Option "TapButton3" "3"
    (**) Option "CircularScrolling" "true"
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    (**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
    (**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
    (**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
    (--) SynPS/2 Synaptics TouchPad: touchpad found
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 2.2.5
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event4"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event1"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event2"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) intel(0): EDID vendor "LPL", prod id 58112
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    (II) intel(0): EDID vendor "LPL", prod id 58112
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    (II) intel(0): EDID vendor "LPL", prod id 58112
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    (II) intel(0): EDID vendor "LPL", prod id 58112
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
    As you can see above it first loads the intel module and then goes on to try and load all the faulty ones. KDE still starts without any fuzz and I think gnome does too I am however trying to test XMonad out and it only goes into a black screen with a pointer, and when I terminate and it seems that this is to blame.
    And when I terminate the Xmonad session with alt+shift+q xorg has outputted the following:
    xauth: creating new authority file /home/vesz/.serverauth.1522
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.3.901 (1.6.4 RC 1)
    Release Date: 2009-8-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH x86_64
    Current Operating System: Linux svirfneblin 2.6.30-ARCH #1 SMP Tue Sep 8 01:42:10 CEST 2009 x86_64
    Build Date: 04 September 2009 05:45:43PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Sep 8 13:45:59 2009
    (==) Using default built-in configuration (39 lines)
    (EE) Failed to load module "i810" (module does not exist, 0)
    (EE) Failed to load module "vesa" (module does not exist, 0)
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    WARNING: All config files need .conf: /etc/modprobe.d/sound, it will be ignored in a future release.
    FATAL: Module fbcon not found.
    Setting master
    waiting for X server to shut down Dropping master
    Maybe fbcon to blame? or is that just something that is apart of fbdev. I am also using KMS with 'options i915 modeset=1' to get native resolution in console if that might have something to do with this.
    Thanks, hope I didn't post too much worthless stuff
    EDIT: This is the way xmonad works, I didn't load anything in config still I think all the failed module loads are rather annoying and would like to get rid of them if anyone knows how.
    Last edited by vesz (2009-09-08 17:49:19)

    What is on the command line for your kernel in your grub configuration file?  (/boot/grub/menu.lst)
    For Intel chips, when using mode setting and drm, Intel provides its own frame buffer that is not compatible with any other frame buffer (VGA, VESA, NG, etc...)
    Do not specify any video settings on the kernel command line.  No video=... , No VGA= ..., nothing.
    After the kernel loads, the Intel frame buffer should start about the same time as the first kernel modules get loaded.  There is a good article at http://wiki.archlinux.org/index.php/Intel_Graphics 
    If the frame buffer doesn't start, see the bit about Early Start.
    Good Luck
    Edit:
    After reading your problem more closely, I may have misunderstood.  The problem with the black screen after logout is not the fault of trying to load the other, non-existent drivers.  It is due to a bug in KDM.  The black screen does not occur with GDM.  (Personal Aside:Unfortunately I cannot abide the look of GDM)
    As a work around, edit /usr/share/config/kdm/kdmrc and find the block labeled :
    [X-:*-Core]
    and add a line that reads:
    TerminateServer=true
    The black screen is preceded by an xorg-crash.  The terminate-server causes KDM to kill any existing server at log out and start anew (originally this was to manage memory leaks)
    Last edited by ewaller (2009-09-10 06:29:36)

  • Trouble with wireless n and smb shares

    I have a bit of a per-plexer here.
    I have a personal mac that up until a little while ago, ran 1.5.8 flawlessly for six months since i had it.
    This included a lot of mounting my windows 7 file server and watching movies or listening to music over wireless G. Every night in fact I would fall asleep to a movie, then wake up and play some music from my music folder on the same server.
    The battery would die nightly of course. Morning, charge it up with some music on.
    I picked up a copy of snow leopard upgrade for 30 bucks when it was released or there about and installed it. Went fine and I continued happily using the machine for about 2 months.
    Then I bought a belkin wireless N gigabit router, to replace my wrt54g. It worked alright and I continued my daily/nightly routine, watch a movie, sleep, listen to music.
    However the first morning, and every morning subsequently there after I have run in to a pain-in-the-butt problem.
    I awoke to find, like always, my server shares still mounted (or at least they appeared to be). But opening any of them would present a blank finder window, like no files were available.
    Unmounting and re-mounting the shares would fail, with a message saying unable to connect to the PC.
    So, what do you do next? I reboot. My programs close, the dock, finder, my background turns to the blue solid.
    System stops re-booting... it sits here, with a plain cursor and I am unable to do anything but hard-power it off.
    After a hard-reboot,everything functions normally until it hibernates or sleeps with the samba shares.
    I took the router back and got a dlink n/gigabit router instead, cussing out belkin on my way to the store. No change!
    So I reinstalled (I didn't even archive, i just blew it away) - installed 10.5.8 again, upgraded to SL, and connected to my wireless. I can still reproduce the issue.
    So, i'm bummed, i've tried a lot of things I wont bother listing here but one more important detail i wanted to add is:
    I work at a company that has blanket wireless b/g coverage using multiple access points and a controller to do load balancing and access point switching.
    Recently, we got a few N access points from the provider and I set them up around the office in a new, isolated SSID on the subnet i do my work on. Using WPA2 Psk, like at home.
    So, now to be fair I've got a slightly-newer mac at the office, same unibody but late 2009 instead of early 2009 (sd slot instead of express slot). I threw SL on it, and connected to the new SSID i setup and finally connected to our netapp and left for the night.
    Come in in the morning and I can reproduce the issue on the work mac.
    So, two different macs, 2 very different N wireless networks and 2 different file server platforms. But same prob, **** thing chokes overnight.
    I have been able to reproduce this issue with a slough of late 2009 macs at the office now, as I handed out the SSID key to those with SL as my unwitting test subjects. Everyone's coming up with the same problem.
    Has anyone out there run in to this? It's such a huge issue i'm surprised i can't find anymore information about it!
    Thanks,
    Josh

    I took a look at the logs and copy and pasted a lot, these are a few before and many from AFTER the hibernation last night.
    10-04-15 12:23:59 AM kernel hibernate image path: /var/vm/sleepimage
    10-04-15 12:23:59 AM kernel sizeof(IOHibernateImageHeader) == 512
    10-04-15 12:23:59 AM kernel Opened file /var/vm/sleepimage, size 2147483648, partition base 0xc805000, maxio 400000
    10-04-15 12:23:59 AM kernel hibernate image major 14, minor 2, blocksize 512, pollers 5
    10-04-15 12:23:59 AM kernel hibernateallocpages flags 00000000, gobbling 0 pages
    10-04-15 12:23:59 AM kernel NVEthernet::setLinkStatus - Valid but not Active
    10-04-15 12:23:59 AM kernel AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    10-04-15 12:23:59 AM kernel System SafeSleep
    10-04-15 6:52:18 AM kernel hibernatepage_listsetall start
    10-04-15 6:52:18 AM kernel hibernatepage_listsetall time: 101 ms
    10-04-15 6:52:18 AM kernel pages 270008, wire 57222, act 56136, inact 190, spec 78, zf 0, throt 0, could discard act 30534 inact 16602 purgeable 6519 spec 102727
    10-04-15 6:52:18 AM kernel hibernatepage_listsetall found pageCount 113626
    10-04-15 6:52:18 AM kernel IOHibernatePollerOpen, mlget_interruptsenabled 0
    10-04-15 6:52:18 AM kernel IOHibernatePollerOpen(0)
    10-04-15 6:52:18 AM kernel writing 111988 pages
    10-04-15 6:52:18 AM kernel image1Size 126571008
    10-04-15 6:52:18 AM kernel PMStats: Hibernate write took 3775 ms
    10-04-15 6:52:18 AM kernel all time: 3775 ms, comp time: 767 ms, deco time: 0 ms,
    10-04-15 6:52:18 AM kernel image 226658304, uncompressed 458993664 (112059), compressed 223746576 (48%), sum1 44b2f2dc, sum2 b54e1f71
    10-04-15 6:52:18 AM kernel hibernatewriteimage done(0)
    10-04-15 6:52:18 AM kernel sleep
    10-04-15 6:52:18 AM kernel Wake reason = PWRB
    10-04-15 6:52:18 AM kernel System Wake
    10-04-15 6:52:18 AM kernel Previous Sleep Cause: 5
    10-04-15 6:52:18 AM kernel en1: 802.11d country code set to 'X0'.
    10-04-15 6:52:18 AM kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    10-04-15 6:52:18 AM configd[14] network configuration changed.
    10-04-15 6:52:18 AM configd[14] setting hostname to "hostname.local"
    10-04-15 6:52:19 AM kernel NVEthernet::setLinkStatus - Valid but not Active
    10-04-15 6:52:19 AM kernel en1: 802.11d country code set to 'US'.
    10-04-15 6:52:19 AM kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    10-04-15 6:52:20 AM kernel Auth result for: 00:24:01:f3:01:5a MAC AUTH succeeded
    10-04-15 6:52:20 AM kernel AirPort: Link Up on en1
    10-04-15 6:52:20 AM kernel AirPort: RSN handshake complete on en1
    10-04-15 6:52:22 AM configd[14] network configuration changed.
    10-04-15 6:52:22 AM configd[14] setting hostname to "hostname.domain"
    10-04-15 6:52:27 AM Firewall[407] krb5kdc is listening from :::88 proto=6
    10-04-15 6:52:27 AM Firewall[407] krb5kdc is listening from 0.0.0.0:88 proto=6
    10-04-15 6:52:40 AM ntpd[310] time reset +0.219956 s
    10-04-15 6:53:36 AM [0x0-0x25025].org.mozilla.thunderbird[839] Warning: unrecognized command line flag -foreground
    10-04-15 6:53:38 AM WindowServer[423] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    10-04-15 6:53:38 AM com.apple.WindowServer[423] Thu Apr 15 06:53:38 pluto.sunlab WindowServer[423] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    10-04-15 6:55:34 AM kernel smbfssmblookup: smbfssmbqpathinfo error = 60
    10-04-15 6:55:34 AM kernel smbfssmblookup: smbfssmbqpathinfo error = 60
    10-04-15 6:55:34 AM kernel smbfssmblookup: smbfssmbqpathinfo error = 60
    10-04-15 6:55:34 AM kernel smbfssmblookup: smbfssmbqpathinfo error = 60
    10-04-15 6:55:34 AM kernel smbfssmblookup: smbfssmbqpathinfo error = 60
    10-04-15 6:55:34 AM kernel smbfssmblookup: smbfssmbqpathinfo error = 60

  • More trouble with PDF folios

    Hi.
    I also have a trouble with PDF folios, where vertical article has 2 pages and horizontal article has 1 page.
    When i set that folio horizontal swipe only, there will be one extra blank page at the horizontal article.
    When there is more pages in articles (4 and 2 accordingly), there is no such artifact.
    Ants.

    have you tried my example that I just posted here: http://forums.adobe.com/message/4173179#4173179
    With kind regards,
    Klaasjan Tukker
    Adobe Systems

Maybe you are looking for

  • Secondary Index vs Secondary Indices

    Hi All, In the earlier version already  we have the primary index,secondary indexes,But now iam going through the enhancements in NW 7.0 In this they mentioned Secondary indices as the new enhancement with NW 7.0,I know how to create the Secondary in

  • Ipod shuffle 2nd generation not recognized

    Just aquired an ipod 2nd generation shuffle at a yard sale. Plugged it in and I get flashing lights (sorry, color blind and I can't tell if they are green or orange). Shuffle is not recognized by computer with either disk mode or in iTunes. Downloade

  • Assets balance Report(T Cd s_alr_87011964) Not Tally with GL Code in FBL3N

    Hi Friends SAP Standard Assets balance Report(T Code s_alr_87011964 and s_alr_87011963 ) Not Tally with GL Code in FBL3N. In SAP report coming with Report Date but FBL3N coming with Posting Date So How I add Posting Date input parameter in Sap Standa

  • Server Disk I/O issue?

    I have a server 2008 with 24gb of RAM. On it, there are 5 separate instances; some SQL2008 and some SQL2012. In my Oracle databases that are in Windows environment, I normally reserve 30% (about 7gb) of RAM for OS. So this is what I'm doing as well f

  • Showing Grey Colour on EWA session only for PI systems

    Hi, I have a strange issue when I try to generate EWA report for PI systems. For all other systems the reports are generated fine and in PI systems are exactly the same configurations as in other systems. I want to let you know that in PI systems in