More Web output functionality

I am very happy with the output of Lightroom to websites. That being said, it would be fantastic if more functionality could be built in, or "plugged in". I would like to see the ability to differentiate between multiple galleries when exporting to the web. While I am sure if I was any good with dreamweaver or flash, I could figure this out, I am not nor do I really have the time to learn those programs or html for that matter.

Hi Petr,
You will need to insert an HTML table into your web template and place the web items in the cells of this table to make them appear side by side...it is not a question of the web items width.
You can insert the table from the toolbar in WAD.
Hope this helps...

Similar Messages

Where is Output function in Bridge for Windows

I am learning Adobe Photoshop and am being introduced to Bridge. The Tutorial I am using demonstrated the Output function which allow images to be converted to PDF's. In my Windows version I am finding a Keyword function in it's place that does not do the same thing. Can someone tell me where the Output function is for the windows version of Bridge?

In my Windows version I am finding a Keyword function in it's place that does not do the same thing.
Not sure if I understand this problem, there is a Keyword panel where you can add keywords and sub keywords or select already existing keywords
Can someone tell me where the Output function is for the windows version of Bridge?]
In Bridge CC it is gone with numerous posts about it hence you did not get a reaction on your post. But since you clarified you have CS6 then there are two ways. One is a tiny little icon left in the top bar (Between the 'edit in Camera Raw' and 'left and right rotation arrows' showing a paper with folded edge.
The other more easier way is to select the workspace called 'Output'. You can find this at the right side of the top bar next to the search field. Either click on the triangle to reveal the rest of the names or drag the 2 vertical dotted lines to the left to extend the row of workspace names.

Editing Save for Web output settings with script

I'm just curious if it is possible to edit the Save for Web Output Settings in a script (Not the save for web options, but the "Edit Output Settings" in the drop down menu). I figured it would be somewhere under the .options, but I'm not finding anything.

You can find examples here in forum.
Here is one by Paul Riggott:
Paul Riggott wrote:
Here you are...
function main(){
if(!documents.length) return;
var Name = app.activeDocument.name.replace(/\.[^\.]+$/, '');
var saveFile = File(Folder.desktop + "/" + Name + ".jpg");
if(saveFile.exists){
   if(!confirm("Overwrite existing document?")) return;
    saveFile.remove();
SaveForWeb(saveFile,100); //change to 60 for 60%
main();
function SaveForWeb(saveFile,jpegQuality) {
var sfwOptions = new ExportOptionsSaveForWeb();
   sfwOptions.format = SaveDocumentType.JPEG;
   sfwOptions.includeProfile = false;
   sfwOptions.interlaced = 0;
   sfwOptions.optimized = true;
   sfwOptions.quality = jpegQuality; //0-100
activeDocument.exportDocument(saveFile, ExportType.SAVEFORWEB, sfwOptions);
Have fun

Adobe Muse (2014.3) "Add Web Font" Function Not Working As Expected - Newly Added Fonts Become Unavailable Though Shown

Hello.
This has also been posted in the Community: Adobe Muse Bugs forum.
I've been having some odd/irregular issues though they have now become fairly predictable in nature. The issue is in regards to Adobe Muse (2014.3) and the availability of web fonts provided through the applications "Add Web Fonts" feature. Once added they perform as expected but then become "unavailable." Full details below. I have been a Creative Cloud Complete subscriber for a number of years so am fairly familiar with the way in which the system works minus a few issues that have popped up now and then, this one included.
System Info:
Adobe Creative Cloud (Full Subscription): Version 1.9.1.474
Adobe Muse: Version 2014.3
OS X Yosemite: 10.10.2
Here is a recap of what has been taking place. I'll detail the bug as best I can.
1. Created new Adobe Muse project. Everything normal.
2. Chose to add a new font through the "Add Web Fonts" function within Muse. A note, my Creative Cloud App is running/open at all times (in file synch mode).
3. Chose new fonts using above. All seemed fine (see screenshots below).
4. Fonts also were indicated as being "Synched" within Creative Cloud (screenshot below).
5. As expected the two fonts were added to the list of available Web Fonts within Muse (first screenshot below - left). I added them successfully to my site. Well after a number of hours I went back to this same font selection menu within Muse and the fonts were still visible yet the sub-menu that one would expect showing various forms (i.e. Bold, Italic, etc) was not available. In a sense the font could not be chosen from the list even though the name is clearly visible (second screenshot below - right).
Have no idea what may have been wrong. Saved Muse project, closed and reopened - nothing changed. Created new project - fonts still "shown" in menu but can't be used. Did find a vague description using Google of similar problem (different application) which recommended closing Creative Cloud Desktop App and reopening as one possible solution. This DID WORK initially yet the problem, though corrected for a period of time (few hours at most), would reappear again where one would again see yet not be able to choose from the two Web Fonts. Went so far as to uninstalling the Creative Cloud Desktop application and reinstalling. Still have not solved the problem.
Any thoughts as to what this may be would be welcome. Restarting the CC app each and every time the fonts become unavailable is quite time consuming to my workflow.
Thanks!

Abhishek,
Thank you for the reply. Wanted to comment on a few things.
I reviewed the other post that you've referenced. Nothing unusual jumped out at me as something that I was not aware of. I'm running an older iMac that is in good working condition. 2.4 GHz Intel Core 2 Duo, 24" screen. I know this issue is fleeting, as I stated earlier typically can be corrected with a restart of the CC Desktop application (that I am always running at startup). I have not been able to determine that shutting down Muse corrects the issue. I would, at this time say it doesn't.
I did open InDesign and see if the fonts in question, Open Sans and Open Sans Condensed, were present and usable. They were. The fonts are shown as being synched in my CC Desktop app window (even if they are not "installed" in Muse). That is expected but it may be a bug in how Muse brings in a font from those that are already synched to your CC account. I don't know enough about how that works to comment.
And just to complicate matters, Muse seems to be working again, the fonts that is. I brought them back in and they are showing up in all locations (which there are actually three - see screen shots).
First is primary text menu dropdown (to right of orange "Text").
Second is if you click orange Text link. Another drop down menu appears.
And lastly, the Text Panel to right of screen.
I also wanted to add this extra bit of information, for what it is worth. When the issue arises and you do not get the sub-menu dropdown showing various styles of the font (italics, bold, etc.), one can use click on the missing font if you had used it previously and it is present in the "previously used font" list.
Cheers!

Web Analysis functions not working in Workspace

I am looking for a list of Web Analysis functions that are available in the Java client that will not work in the Workspace DHTML client (Version 9.3.1.0). Any guidance would be appreciated.

There are 4 types of differences:
- font differences, Workspace (DHTML) uses the WA Server fonts whereas WA Studio client machine fonts.
- Service Buttons are very restricted using Workspace
- Display: Tab selection, Splitter panels, Slider selection do not render in Workspace
- Cannot restrict WA Tools menu in Workspace at all, where you can in the Studio.
For exact details check out the Hyperion Web Analysis Studio User’s Guide from the Doc Library:
http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_4.htm
Cheers
Iain

Not able to edit more than one function of new photos

I recently upgraded my iPhoto to 09 after shifting to Leopard 10.5 on my G5. Today, for the first time after the upgrade, I loaded about 100 photographs and have found that I am unable to edit more than one function at a time on these image. For example, the image contrast can be adjusted, but, following that, no other function or cropping appears to work. The saved image, after selecting "Done", doesn't show any change other than the initial edit. Surprisingly, I am able to perform multiple edits on the images that were already in the Library (8,500!). After looking at this forum's topics and trying some of the suggestions provided for other editing issues, I've tried to edit more than one function in full screen view, library and album modes with no success.
Any help would be appreciated.
thanks,
Message was edited by: Umnak ( showed incorrect OS on original)

If you go the PS or PSE route this many be of some help:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..

How can I get PS CC to always load my preferred Preset while saving for web output?

For my purposes, I'd prefer to save all JPEGs at 100% quality while saving for web output. I've made a preset as seen below.
However, PS doesn't always defer to this setting when I begin saving an image for web. Is there a way to make this preset automatically
load every time I open the output to web process? I process a large number of images, and if I could avoid correcting this it would save me a lot of time.
I'm using PS CC on a PC. Any help will be appreciated!

This is the only custom preset I've made with this particular system. So I'd need to delete the pre-loaded PS presets?
I'm a little loathe to remove the options in case they might be needed in the future or for a task other than the primary one described.

Synchronizing 2 or more QT video streams to 2 or more video outputs?

My students need to play two or more QT video files in sync (ideally contained in the same file) to two or more video outputs. We have an app. called Modul8 which can do this but it's way to complex for operation in an art gallery installation. Does anyone have any suggestions?

ah, found the answer, the irrelevant video needs to be set to fullScreenTakeOver=false, and then when it's the relevant video, the same property needs to be set to true.

Is there a way to merge 3 or more report output in PDF into one

Hi All,
I know about the report sectioning. I am wondering is there any other way to merge 3 or more report output in pdf form to a single document.
I have seen that there are many thrid party tools. Wondering is there anything from Oracle reports feature or any Oracle product for this?
Thank You
Rajesh ALex

If not changing the reports design, third party tools is the only options. AFAIK, there is no Oracle proprietary tool for merging PDF files..

SQLLoader - using more than 1 function in a single field

Hi.
I have problem with sqlloader. i'm trying to call 2 function (DECODE and NPCS_FINBOUND_CTRL) for field type like below
LOAD DATA
INFILE "TEST.txt"
APPEND
INTO TABLE NPCS_INBOUND_NIZ
TYPE POSITION(1:1) "DECODE(:TYPE,1,2,:TYPE)" "NPCS_FINBOUND_CTRL(:TYPE,NPCS_FSEQCTRL('P_GFA','0',:TYPE),NPCS_FSEQC
TRL('P_GFA','1',:TYPE),NPCS_TRANS_ID_SEQ.nextval,null,null,null)"
,FILE_ID "NPCS_FSEQCTRL('P_GFA','0',DECODE(:TYPE,1,2,:TYPE))"
,BATCH_ID "NPCS_FSEQGET('P_GFA','1',:TYPE)"
,TRANS_ID "TRANS_ID_SEQ.nextval"
,DATA POSITION(1:160)
is sqlloader allow us to call more than 1 function because when i run the loader i got error like this
SQL*Loader-350: Syntax error at line 6.
Expecting valid column specification, "," or ")", found "DECODE(:TYPE,1,2,:TYPE)".
DECODE(:TYPE,1,2,:TYPE)" "DECODE(:TYPE,1,2,:TYPE)"
,FILE_ID "NP
ok
tq.

create the control file as given below
load data
infile *
into table emp1 truncate
(empno char terminated by '\n',
ename expression "substr(function1(:empno),1,3)",
ename1 expression "substr(function2(:empno),1,3)")
begindata
111
222
333
Regards,
Abu

Problem with CFMX web service function return

I made a post yesterday about a web service function I was
writing, as it turns out my post was extremly incorrect for my
problem. With this web service function I can return an array just
fine, I can return one instance of an object just fine, however,
when I try to return an array of the object I keep getting the
error:
Could not perform web service invocation "SelectGames"
because AxisFault faultCode: {
http://schemas.xmlsoap.org/soap/envelope/}Server.generalException
faultSubcode: faultString: [org.apache.axis.AxisFault : ; nested
exception is: coldfusion.xml.rpc.CFCInvocationException:
[java.lang.IncompatibleClassChangeError : Dependent CFC type(s)
have been modified. Please refresh your web service client.]];
nested exception is: coldfusion.xml.rpc.CFCInvocationException:
[org.apache.axis.AxisFault : ; nested exception is:
coldfusion.xml.rpc.CFCInvocationException:
[java.lang.IncompatibleClassChangeError : Dependent CFC type(s)
have been modified. Please refresh your web service client.]]
faultActor: faultNode: faultDetail: {
http://xml.apache.org/axis/}stackTrace:
AxisFault faultCode: {
http://schemas.xmlsoap.org/soap/envelope/}Server.generalException
faultSubcode: faultString: [org.apache.axis.AxisFault : ; nested
exception is: coldfusion.xml.rpc.CFCInvocationException:
[java.lang.IncompatibleClassChangeError : Dependent CFC type(s)
have been modifie..
which basically means that the CF server needs restarted.
However if I restart the CF server, no matter how many times I am
still getting this error. If I change up my web service function to
return just a normal array of integers or strings, or I change it
to return one instance of the arbritrary complex type it all works
just fine. I am still a little new on this subject and any
enlightenment would be great. If anyone has found a way around this
please let me know.
Here is my complex type:
<cfcomponent>
<cfproperty name="Game_id" type="numeric">
<cfproperty name="gameDate" type="date">
<cfproperty name="Starttime" type="string">
<cfproperty name="Place" type="string">
<cfproperty name="Level" type="string">
<cfproperty name="Sport" type="string">
<cfproperty name="Gender" type="string">
<cfproperty name="Opponent" type="string">
<cfproperty name="Type" type="string">
<cfproperty name="Link" type="string">
</cfcomponent>
I loop trhough a query and set a cfobject of the types above,
then I append that object to an array and try t o return the array.
Here is the basics of the loop:
<cfset theArray = arrayNew(1)>
<cfobject component = "games" name = "test>
<cfloop query ...>

<cfset arrayApend(theArray, test)>
</cfquery>
<cfreturn theArray>
my return type is array, I think the problem is I need to
specify the return type to be an array of arbritray complex types
which is impossible to do in CF. Anyone find a way to get around
this?? Any feed back at all would be greatly appreciated.

Yes, I have tried it and return type any does not work in
this situation since this function is being consumed by a web
service. It needs to be in the form of an array of arbritrary type
that is defined in a cfc file. Since this is WSDL the returntype
has to be specified to every last bit.

Can I create a dll from labview with more that one function name

I know that when I create a dll from C and then call it in labview using the call library function node I can see the different functions on the configuration screen. Is there a way to create a dll in labview to have more than one function name? No matter how many functions happen in my VI it seems to build into a dll under the same function name requiring inputs for every function, can this be avoided somehow?
Thanks,
Dave

Each function corresponds to a separate VI. When creating the dll, on the Source Files tab of the app builder, click the Add Exported VI for each VI that you want. SubVIs of a main are not automatically exported and will not be available as separate function calls.

Web service functions in SSO without username and password

Is there a way to use the Public Report Web Service functions when configured in SSO and without passing a username and password? I was able to try out the web service and make it work. As we all know, you need to pass a username and password for each web service call unless your reports can be accessed by guests. In an SSO + LDAP server configuration, there are cases in which you are not allowed to get the password. The password can not be decrypted.
Is there a way to still use web service? or do you need to use the url approach instead? But if you use the url approach then you may be limited to generating reports only.
I'm thinking there should be since if you are already logged in for SSO then you should be able to generate.
Any way to configure this?

<i>When I access web reports from bw.</i>
i hope you are not talking about BEX web reports , since you have mentioned ITS.
Is it a standlone ITS or intergrated ITS?
can you post the url pattern here.
Regards
Raja

SSL Certificate to apply on more web application - SharePoint 2013

Hi,
based on your experiences, I'd like to know which SSL certificates are good in order to apply them for more web applications in a SharePoint 2013 farm. Saying a good SSL certificate I intend a SSL certificate not more expensive. The idea is to buy one
certificate with 1 or 2 year licence and use it for two, three, ... web applications.
Fe, I've a look to Thawte certificates but I don't find any info talking about the possibility to apply one certificate for more web applications.
Any suggests to me, please?

A single-host certificate applies to one host, or a single Web Application using Path-based Site Collections.
A SAN certificate applies to multiple, limited number of hosts for use with multiple Web Applications using Path-based Site Collections (or in a limited fashion, Host-named Site Collections).
A Wildcard certificate applies to an unlimited number of hosts, or an unlimited number of Web Applications using Path or Host-named Site Collections.
You want a wildcard, unless you have a good reason to not want a wildcard.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Mail Link not showing (nor is copyright) in web output

I'm using the flash gallery choice for output to web, and can't get an email address to show up on the screen (nor the copyright information). I've filled in both fields, they just don't seem to have a place on the finished piece.
Laurence Bartone

Actually, I've now tried it on a number of templates for web output, and none of them actually show the text or link for the email link or web address - it's not showing up in the template or final output.
Also, is there a way (not too hard!) to place a 'back' button or a url address somewhere in a template? If I knew the actual text to place, I could >perhaps< copy it in somewhere...
Thanks
Laurence Bartone
Check:
http://bartonephotography.com/Weddings/
That's a link, using the flash gallery - but I'll probably change it soon to a varient on 'blue sky'.

More Web output functionality

Similar Messages

Maybe you are looking for