Moron Here.. Someone Please SAVE MY BEHIND!

I recently upgraded my video card to a ATI all in wonder 2006 256mb, which "forced me to upgrade" to Windows XP from 2000 pro. I had partitioned C: formated it and installed Windows XP on a clean drive.. knowing that ALL of my iTunes files were on a completely separate hard drive (labeled Z:) After the XP install the C: drive recognized the Z: file and all my music files, however, the iTunes was run on my C: drive which {please correct me if I am incorrect}had all the certificate of purchase or whatever it was that said I had the "right to play it on that computer" are gone?? or am I getting this message when I update my iPod now?

Can you play any of the purchased music from inside iTunes? It should ask you for your Music Store password on the first attempt. That "authorizes" the computer for playback of all songs purchased under that account. After that, iTunes should be able to load them into the iPod.

Similar Messages

KT4 Ultra - will someone please save my sanity

ok here goes:
ORIGINAL BUILD:
MSI KT3 motherboard
athlon tbird 1ghz
2 IDE hdds
512mb ram
windows xp home
SB audigy gamer
Geforce 3
lynksys lan card
USB key/mouse
NEW BUILD:
KT4 ULTRA mb
athlon 2100+
IBM deskstar 80mb in the IDE 3 spot
Leadtek winfast 250 Ultra myVIVO geforce 4 TI 4600
512 ram
sb audigy gamer
onboard lan
windows xp home
usb key/mouse
ok i am ready to off myself with this thing.....i backed up the needed software then swapped motherboards, as well as CPU....also changed the video cards. First was that everuything started going wrong...windows would crash to a blue screen that went by lightning fast since my pc would reboot itself.....then it would post start loading windows then reboot itself. I adjusted every bios option for close to 8 hrs last night to seee what would work. when i finally got into windows in safe mode it might or might not reboot. No sign of the third hdd (what am I doing wrong here...or can that IDE3 not be used as a standard third hdd) so i swapped back the original vid card since that usually is a prob, but no real diff.....so i formatted completely the #1 drive and relaoded xp home complete clean install......went thru the whole thing ok but when i tried to download the SP1 the computer started the whole rebooting itself over again. WHAAAAAA!!!!! does any one have any ideas, since the only diff in the pc now is the mb and processor, i did the clean install using my orginal video card with the hopes of installing it again later. I did install the MSI IDE driver, the broadband driver and the USB2.0 driver found on the disk, but i didn't install the others since it said not to under windows XP...should I have installed that whole 4 in 1 driver thing with the agp driver for VIA??? i searched the net and have been to 100's of sites before posting here, all with thwe hopes of figuring this thing out for myself, but i am at your collective mercy. please help whille i figure out where i out those darn bullets.......

interestingly, it seems somewhat fixed...sorta...installed new via 4in1 drivers which allowed me to then istall WDM for my video card.....now i am stuck with trying to get the HDD on the IDE3 to be recognized....i tried enabling raid but XP keeps telling me that it can't install the raid driver becuase "data is invalid"......what the hell does that mean...tried every diff version of the ware but no luck....why can't the friggin bios have an IDE 3 enable thing....or i wonder how else i might be able to get this all to work.....hasn't crashed in 4 hrs which is a triumph

I need some help here. someone please respond with some type of idea.

okay, here's the deal
when i take the Ipod out of the usb, i cut it on, and it's just a constant green light in the front that wont go away. it wont play, and wont have any affect on the buttons or anything. it's just a steady green light.
it wont show my battery life until it's cut off.
do you have any idea what's going on?
i'm so uber angry it isn't funny.
P.S.- I've had this ipod for like, almost a year.

okay, here's the deal
when i take the Ipod out of the usb, i cut it on, and
it's just a constant green light in the front that
wont go away. it wont play, and wont have any affect
on the buttons or anything. it's just a steady green
light.
it wont show my battery life until it's cut off.
do you have any idea what's going on?
i'm so uber angry it isn't funny.
P.S.- I've had this ipod for like, almost a year.
See if this helps:
http://docs.info.apple.com/article.html?artnum=303332

SOS! SOS! My system is stuck by Norton Ghost! Please save me

Alright, i initiated norton ghost to image my system and everything went up in smoke!!
My computer got stuck on the : Booting from PC DOs screen and would not load ghost to proceed to the image.
i tried reseting the computer and it'll just get stuck there!!!
eeekk...i spent 4 days installing the sytem and i really really do not want to format it it again...
someone please save me

hmmm first how bout some system stats..
is your psu up to spec( yeah yeah i know usual scape goat question) biut it is highly recomended that you have a healthy 20+amp 12v rail.
you mention scsi..
i saw some threads that a certain model adaptec card had some problems.
i have read in maxpc magazine that norton ghost had some problems with a sata raid array(needed to add a /plus some text code to work) maybey that is a question for norton tech support..puely a guess though.
it reallly shouldn't be that hard to set up your system though...
if your memory and psu is fine, try unpluging sound card..usb devices, check for grounded case( did you use the bhrass stabndoffs tro mount your mobo. is your psu overloaded by 8 drives a heavy duty graphics card etc.. try to go to basics and go from there.
did your windows system have scsi drivers loaded? may need f6 install from fresh..
can you see the drive in bios... is bios boot order correct..
is cableling good.. tried other capples, check for creases, missing power etc..

I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect to my MacBook it erases everything on had on there. Can someone please help with this problem?

I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.

dwgar1322 wrote:
I have just started using WD external hard drives, I use it to save my movies and music on. On more than one occasion, when I connect it to my MacBook it erases everything I had save on the hard drive. Can someone please help me with this problem? I am super tired of having to put all of my movies and music on the hard drive just to have it erased again. The products I am using are WD 4TB My Book and 2 TB My Passport external hard drives. When it happens, there is always an icon that reads, EFI, along with the My Book icon. Thank you for your assisstance.
Yes, you have WD software installed REMOVE IT !!
WD has warned its customers about their huge mistake that their software doesnt work on Mavericks and causes data loss.
(also dont use WD drives anymore)
Read all about it here:
https://discussions.apple.com/thread/5475136?start=255&tstart=0
See their website on removing the destructive WD software here:
http://community.wd.com/t5/External-Drives-for-Mac/External-Drives-for-Mac-Exper iencing-Data-Loss-with-Maverick-OS/td-p/613775
Western Digital External Hard Drives Experiencing Data Loss On OS X Mavericks
http://www.cultofmac.com/252826/western-digital-external-hard-drives-experiencin g-data-loss-on-os-x-mavericks/

After migrating to a new MBP, when saving or opening documents, I sometimes (but not always) get a warning such as: "Word cannot save this document due to a naming or permissions error on the destination volume." Can someone please explain?

I recently migrated from a MBP with OS 10.6 to a MCB with OS 10.8. Some glitches are popping up. Here's the one on my mind at the moment:
When saving or opening documents, I get a warning such as: "Word cannot save this document due to a naming or permissions error on the destination volume." Can someone please explain?

Since this is isolated to a single file, try exporting it to Interchange Format (.inx), then open and save the resulting file as a new InDesign file.
Since the problem occurs during export, that may not be possible. Another option to try would be to copy all elements, page by page, and "paste in place" into a new document the same size. If you used layers, be sure to enable "paste remembers layers" in the layers panel menu.
This kind of problem is often indicative of an underlying font issue. You said there are only three fonts, and you should verify that in Type > Find Font... Try replacing, at least temporarily the fonts in use with something else that you know to be reliable from other documents. You might want to do this before the other steps.
Peter

Can someone please tell me how to save a snapsnot taken with Adobe Reader X?

Could someone please tell me how to save a snapshot taken with Adobe Reader X ?

After taking the snapshot, you need to open a new document in an application that allows you to paste images.

Can Someone please tell me how to save movie for email & web?

Can Someone please tell me how to save movie for email & web? I have created a few small videos, (last one was only 3 minutes), and I have tried to save them many different ways, but when I try to send them via email, it takes forever to send and for others to open.
People send me video links all the time, and they never take that long. What am I doing wrong?
Thanks for your help.
Sharona

People send me video links all the time, and they never take that long...
Karl is (aside many other things) expert on how-tos and codecs, but one more thing...:
video link:
you have two options for sharing video with the world: you can send the whole file to someone - as an xx MB attachement to a mail...; or, you load up the video to some website (.mac, youtube, whatever...) and send just the link x kB to that site...
asymmetric:
normal "internet accounts" are asymmetrically (A-DSL)... means: you have FAST downloads, but SLOW uploads.... (my socalled 2k-DSL connections offers downloads 20x faster then my uploads, just to give you an impression...)
so, uploading my videos to my website needs easy >30min for a letssay highly compressed 2min project.... the link to it is just >1kB; the download/watching of the movie is almost instant on/realtime....
now, back to Karl, concerning choosing the right codec/compressor... Karl?
i DO love these phrases in news-shows...

Could someone please help me, I bought my daughter an iphone 4s for my daughters birthday yesterday and set it up for her so she could use it straight away, now we share emails, facetime and when i download an app she gets it too,

Could someone please help me, I bought my daughter an iphone 4s for her birthday yesterday and I set it up for her so she could use it straight away, now we share emails, facetime and when i download an app she gets it too, very annoying for us both.

you can use the same apple id for purchasing apps and music if you want, but turn off automatic downloads. it may be better to have separate ones, but if you want the same app you'd have to pay twice. that's something you'll have to think about. for all the other stuff like facetime and messages and icloud you need to have separate icloud id's. see the apple link below.
http://support.apple.com/kb/HT4895?viewlocale=en_US&locale=en_US

Please save my FreeHand :(

My FreeHand 11.0.2 was working fine under 10.5.4 (Intel
MacBook), until I installed a security update 2008-005 (at least I
suspect that's the reason). After that FreeHand jumps in the dock
and nothing happens, a common problem (sigh) the answer to which
was a HotFix here
http://www.adobe.com/go/tn_18933
I'm not sure how to use that hotfix, I've just double clicked
it and it said success, but FH still didn't work. Then I found out
that a PPC process named AuthenticationS(ervice) blocks 99% of my
CPU while FH is trying to start. The Console also had some lines
about that. I killed the process in the Activity Monitor (it asked
for the admin pass) and then FH did start in the background. I've
tried that several times and had to start it that way.
Then I googled for macromedia authentication and found a lot
of problems. Anyway, I wanted to wipe out every instance of
AuthenticationService from my machine (the Macromedia problems
should be solved by thrashing the Macrovision folder, etc) and I
did delete it from Library/App support, User Library/App support,
FH contents/Shared support etc... Then FH refused to start with a
warning that it's architecture isn't supported. Then I deleted FH
and reinstalled it (no boxes for serial number or anything came
up), but this time
4-5 AuthenticationService processes were blocking 99% of my
CPU and I couldn't kill them, or when I did manage to kill one,
another one popped in immediately, and it only stopped when I quit
FH app. HotFix doesn't help. I've tried to reinstall it numerous
times, delete it with AppZapper, only delete certain
AuthenticationService files, nothing helps... Please save my
FreeHand, I know there are alternatives like LineForm or Inkscape
or Intaglio or Illustrator or whatever but I want my FH back!
:(

Hello adobebody,
A year ago I experienced the same problem. Thought I’d
lost my Freehand forever until I stumbled across a solution.
Here’s a post I later made to someone that was having a
similar problem. I will reprint the whole thing instead of trying
to edit it to fit your situation. And pardon me if this fix has
already been suggested.
Good luck getting your Freehand back!
I may be able to help. On Monday morning my Freehand 11.0.2
went into a coma, exhibiting the same symptoms you describe, with
the added feature of Photoshop (9.0.2) going bad after everytime I
attempted to launch FH. Only a restart would get PS going again.
Freehand -- nothing would get it going.
I spent a good part of 2.5 days trying every trick I know to
get the damn thing to launch with no success. I reinstalled
Freehand, Photoshop and Mac OS X 10.4.10 combo updater, more than
once; ran Disk Utility, DiskWarrior and Onyx multiple times;
deleted and/or replaced with older versions from my backup drive,
many different .plist (preferences) files; and a whole bunch of
other stuff suggested on Mac help sites. Including from Adobe:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_18933&sliceId=1
Which didn’t work for me, but you should try it. Who
knows?
Anyways, still no FH but looking at the Activity Monitor (
FINDER > Go > Utilities > Activity Monitor ) I discovered
that whenever I tried to launch FH it stalled (and became an
“inactive process”) and another process called
“AuthenticationSe” led the list for CPU usage but did
nothing and the computer had to be restarted to regain stability --
stable except for the FH problem of course.
So an “Authentication” issue, and the activation
glitch mentioned in the Adobe link above, eventually led me to the
solution (won’t get into the how and the why because I really
don’t know).
Unfortunately this requires that you have a backup of your
system from back when Freehand still worked. If you don’t,
sorry about that -- hopefully the HotFix above worked, or someone
else has a suggestion based on the following idea:
Restart your computer, repair permissions, verify your disk,
repair disk if necessary, standup and shout FREEHAND ROCKS, restart
again, then....
Uncover a folder called “Product Licenses” on
your startup drive.
Macintosh HD > Library > Preferences > Macrovision
> Safecast > Product Licenses
The folder looks empty, but there’s got to be something
important inside that you can’t see. Replace the Product
Licenses folder on your startup drive with the Product Licenses
folder from the same location on your backup drive or disk (from
when FH worked). Maybe don’t let the folder on the startup
drive get overwritten by the older version, but remove it to the
desktop -- just in case you need to put it back.
Now try to launch Freehand. If this works you’ll get
the startup screen (yay) and the message that you need to activate
your software and you’ll be taken to an Adobe registration
page and there you go.
Good luck.

Time Capsule keeps disconnecting while trying to backup or copy files, can someone please help me?

I have a MacBook Pro, a Desktop PC running Windows 7 and a wifi router connected to the Broadband Internet. All devices share the same local network.
My Time Capsule (early 4th Generation) is connected via ethernet directly to the modem, I'm also able to connect wirelessly.
I also have an external seagate 3t drive connected to the time capsule.
For some strange reason, my Time Capsule keeps disconnecting form the Network after I try to access the data either in the tc or the hd, however the light is always green.
The problem mainly happens when copying data either from my Windows PC or my MacBook Pro: eventually, the connection between it and the Time Capsule is lost, interrupting the copy. It keeps happening every time, after a while, and only gets fixed rebooting Windows and the Time Capsule. I can't copy my PC data.
I've tried soft and hard reset, the time capsule it's discoverable again and able to connect either via ethernet or wirelessly, however if I try to copy something to it or do a backup, it immedialty disconnects itself.
Can someone please try to help me solve this issue?
Thanks

Wow! Thanks so much for such a prompt reply and for trying to help me, I really do appreciate it.
Your reply is so detailed because, unlike me, you are an expert, so I’ll try to answer the questions you are asking, however I’m not that good at computers so please be patient and excuse me.
1. Network layout.
What is the wifi router you have??
Answer: I’m connected to the internet through my ISP (centurylink formely Qwest) modem, ZyXel Q1000Z, I went to my modem page and copied this for you, it hope it helpsModem Status
Modem Parameter
Status
Firmware Version:
QZZ001-4.4.015.1-Q1000Z
Model Number:
Q1000Z
Serial Number:
S110Y12050750
WAN MAC Address:
40:4a:03:f4: I deleted some #s to post it
Downstream Rate:
20127 Kbps
Upstream Rate:
892 Kbps
ISP Protocol
PPPoE
Encapsulation:
ATM - LLC Bridged
I presume this is modem as well.. please give all the details of the modem router .. make and model and what role it has in the network.. ie main router or bridged. If wireless is running what you do with it. Are devices connected to the modem router and so some devices are connected only indirectly to the TC?
Answer:
Make and model listed above, not sure about the bridge thing but in the image above it says something about encapsulation, does that help? If the wireless is running, (I assume you are talking about TC) I usually backup my MBP and my Windows PC, I also have a Seagate 3T Connected to the TC and I save music, photos and files on it to share within my network. Yes there are tons of devices connected to the modem, eg. Mac, MBP, MAir, Ipads, AppleTVs, iphones, printers, etc. Although when I first set-up time capsule (about 1 ½ years ago) I created a wireless network connection, Nobody ever connects to that network to access the internet, the only person that connects to the TC is me and that will be either through my MBP or my pc.
I think I should mention that my ISP modem is connected to my PC through and Ethernet cable, although I connect wirelessly to it and my TC is also using an Ethernet cable to connect to the modem, however I sometimes connect to TC wirelessly. Not sure if you needed to know that be just in case.
What setup and role does the TC have.. ie is it router or in bridge. If the main modem is also router than the TC must be bridged.
Answer: Not sure??
What firmware is the TC running?
Answer: 7.6.4
Has this been stable in the past and now has failed.. or was it always bad?
Answer: Yes!, it used to be stable before, I really never had issues, this has happened since last November I think.
2. Initial changes to get the ball rolling.
Let me strongly recommend you do these thing...
Comment:
I’m about to do your recommendations after I finish typing this, however I thought I should mention that while on Windows 7, I am only able to see the TC on Airport Utility as soon as I unplug the TC and plug it back in, other than that TC doesn't show up on it, I am only able to see the TC through Windows Explorer/Network. Also sometimes while I’m doing something else, like being on the net, I notice the HD connected to the TC seems to be reading something
All SMB compatible names.. that is for windows to work properly.. so short.. 2-10 is plenty of characters.. but make 20 the limit, no spaces and pure alphanumeric. (This is narrow, but easy to remember).
Comment:
When doing the factory reset do I need to this SMB thing? I’m a bit confused here, you are talking about me doing manually, so I can type something like this right?
Good TC name. TCGen4
Good 2.4ghz wireless name. TC24ghz
Good 5ghz wireless name TC5ghz
Exactly what format is the USB drive? Is it partitioned GUID and formatted HFS+ on the Mac?? this is the only way really.
Answer: The Hard Drive connected to the TC is a Seagate 3t, I did do a partition GUID and half of it is to be used in my mac and the other in pc, I had no issues in the past with these partitions, I was able to save files from my MBP to the HD and from my PC to the HD, and then later able to see either files on both my mac or pc.
I use my TimeMachine to Backup on the TC and it backs up both the TC and the HD connect it to it, I then have another HD connected to my MBP and do another backup there, I have lost information in the past and that’s is why I do so many backups.
I also wanted to mention that most of the time the TC disappears from the network is when I try to copy something to it.
I'm also enclosing a couple of photos of my windows airport utility, I am not sure if they will help you know something, I deleted my name and Ip address.
Thanks again LaPastenague

Hi there, I cannot seem to convert my iTunes MP4 songs to MP3 - can someone please assist in this regard?

Hi there, I cannot seem to convert my iTunes MP4 songs to MP3 - can someone please assist in this regard?

Hello @MK,
This functionality has been moved under the File menu in iTunes 11, where you will find a submenu labelled "Create New Version." From here you can choose the format you would like it converted to. Do keep in mind that most music purchased from the iTunes Store (unless they're iTunes Plus purchases) cannot be converted.
iTunes 11 for Mac: Save a copy of a song in a new file format
http://support.apple.com/kb/PH12167
Cheers,
Allen

When my buddy list comes up, i try to double click my buddies name to start a chat and nothing happens. i could receive instant message but cant start my own or reply. someone please help!

I have a macbook pro and on accident deleted ichat but reinstalled it using the cd, when my buddy list comes up, i try to double click my buddies name to start a chat and nothing happens. i could receive instant message but cant start my own or reply. someone please help!

Hi,
DId you download and Install the COMBO version of the last Update that you did ?
iChat on the Install Disk is likely to be several versions behind where your OS has been Updated to.
It needs to Match the OS level.
iChat Updates come in the OS Updates.
You need to run the Updater manually as Software Updates keeps records of what it has done and thinks iChat is up to date.
If you are on Snow Leopard then the COMBO version of 10.6.7 is here
If you are on Leopard then the COMBO for 10.5.8 is here
Googling Mac OS X 10.x.x COMBO where x.x is the version you are up to will generally find the link to the right page if you are at a different OS version.
<
8:36 PM Thursday; June 16, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

My MacBook Pro iTunes movie purchase is not showing in iTunes store movie purchases nor does it show on my iPad or Apple TV. Can someone please help me with a solution? Thanks.

First of all, I live in Ho Chi Minh City, Vietnam. Sometimes, I use a VPN to search on the web here. I purchased Toy Story 3 on my MacBook Pro 2011 OS/X - Lion through iTunes. I initially had trouble downloading it which may be due to being on and off the VPN but after a while it finally downloaded and shows up in my iTunes library on my MacBook.
Under my Apple ID account (which is the only Apple ID account I have), I look under purchase history and it shows that I paid for Toy Story which is where I got my Order # from. But if you go to the iTunes Store then to the Quick Links then click on Purchased, under all my Movies, it does NOT show Toy Story 3 as one of my movies.
Now when I go to my iPad (3rd gen.), Toy Story 3 does not show up under purchased movies (all or not on my iPad). It does not show up on my Apple TV as well. If I want to have Toy Story 3 on my iPad or Apple TV, then it says I have to purchase it again.
I have searched for help via Apple support communities but so far none of their solutions have worked for me. I have tried logging off iTunes & App Store on iPad and also shutting down the iPad. I also made sure that under iTunes Preferences>Store that iTunes in the Clouds purchases is checked. Can someone please help me with this? Your consideration is greatly appreciated. Thanks.

Thanks King_Penguin for taking time to read and reply.
I just purchased this movie on Thursday, May 15, so just a few days ago. I have never had any trouble whatsoever since I have been in Vietnam. I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase.
Sorry, I don't quite understand what you mean by studios and different versions. Could you please explain?
I checked my purchased list in my purchase history under my account and there are no hidden items.

Can Someone PLEASE Tell Me Why My Muse Site Will Not Work Upon HTML Export?

Sorry for the long title!
I've had a few threads going regarding troubles with my Muse site. These issues have been on-going, and once I was no longer able to upload to Fetch—and had to export to html via FileZilla—it just seems the problems continue to snowball.
I have a web site. I will disclose the URL here now: www.jamescdarling.com
When this site was html-based (its original form), using my yahoo small business web host and Fetch, it worked like a charm. All Flash files functioned at 100%, embedded videos/players all played great, etc. Then, I switched over to Muse 1.) because I was excited by the potential, and 2.) I wanted to re-design my site, anyway.
So, I created my site in Muse, and uploaded it all into Fetch. I soon found that some of my Flash files and videos were not working. This was the case for a long time. I finally gave up after trying everything and asking lots of questions here.
Just recently, I set out to fix these issues as I was afraid this half-assed site would appear to make me look unprofessional and like I had no idea how to use Flash. I had some problems with the new Muse Update (had to ditch Fetch and use "export with html" using FileZlilla). Changes made to my Muse file were not taking... and each time I viewed my updated site, the updates were not there—it still looked like the previous incarnation of the site. However, with some help from some of the good folks here, I was able to make my site not only update, but work nearly perfectly—or so I thought!
I just clicked on my personal web site URL link in my LinkedIn page, and I see the old-looking site! The bookmark I have of my site is near-perfect—only the videos still will not load. However, it would seem that my site only functions as well as it does on MY computer only—that is, URL's I have been sending out probably are of the old non-functioning site? The changes I make are not being recognized.
If you will, click on my above URL (in bold)..... If you click on "Resume", you should see light blue rules separating each section. But I bet you will see heavier gray bars with headers inside them. Also, if you view my Flash work, go to the "Epiphone Casino Mini Site".... the "Finshes" and "Features" pages' interactive elements will not function as they should (never mind the video page!)—but they work perfectly when accessing my site from my bookmark on my computer.
Can someone please tell me how to make my site update web-wide, and how to get my Flash files to function?
Thanks!!!
Message was edited by: darling67

It seams a lot of folks are haveing issues with FTP upload. Try these areas to look at. Maybe the right answer. I dont use Flash on my sites for a long time now. Anyhow, check these out.
http://tv.adobe.com/watch/muse-feature-tour/adobe-muse-publishing-and-managing-your-site/
http://www.adobekb.com/using_3rdparty_ftp.html#usingftp-understandinghowftpworks

Moron Here.. Someone Please SAVE MY BEHIND!

Similar Messages

Maybe you are looking for