Mos7720 driver doesn't make any /dev/parport devices

I have mos7715 USB to 1 serial and 1 parallel port convertor. I only have /dev/ttyUSB0, but no /dev/parport0.
Dmesg:
usbserial: USB Serial Driver core
USB Serial support registered for Moschip 2 port adapter
mos7720: 2.1:Moschip USB Serial Driver
moschip7720 2-6.2.2:1.0: Moschip 2 port adapter converter detected
usb 2-6.2.2: Moschip 2 port adapter converter now attached to ttyUSB0
usbcore: registered new interface driver moschip7720
Kernel .config(default Arch kernel: 2.6.35-ARCH):
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
Why don't I see any parallel port?
Thanks in advance.

itayf, It's not just you. kernel 2.6.17.5 is broken and gave me the same hal problems.
In the meantime, try the beyond kernel.

Similar Messages

Tecra M4 - DVD drive doesn't recognize any disk under Vista

Hi,
after the installation of Vista my dvd drive doesn't recognize any disks !
No upgrade from XP! It was a clean Vista installation.
I found several links about the registry entries upper and lower filter this entries doesn't exist in my registry under the class CDROM.
I tested the drive under XP it works fine and recognizes everything.
Drivers are correctly installed no problems in the device manager is prompted.
So i have no idea how to get it working, seems to be a Vista problem
Could any one help me ? I'm really frustrated about this
Thanks for your help

Maybe this helps:
- Remove the CD/DVD drive from the device manager.
- Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
- Then reboot the notebook
But what happens exactly? What disks are not recognized?

It doesn't make any sense (trouble adding new songs/podcasts)

Hi all
When I add new songs to my Ipod shuffle, some will play, some won't. When I try to add some podcasts, I can't add them directly by dragging and dropping, so I had to create a new playlist where I can add some new podcasts. And some will play, and some won't.
By the way, I can't see a whole list of files "inside" the ipod. Instead, I see them in two separated screens.
OS: Windows XP
All podcasts and songs are ok, they can be listened to when played on iTunes
Already changed options for podcasts, so they will play when playing in random order.
iPod shows up in iTunes when pluged in
Used apple stuff for some time now.
I used a ipod shuffle 2nd gen for some time and no problem at all...
thanks in advance.
This whole things it has been doing my head in for the last two days...
PS: And sometimes it only plays podcasts. And sometimes only music and no trace of podcasts. As I said... it doesn't make any sense...
Message was edited by: MGLVGLM
PS 2nd: Tried again, now with two podcasts (ok to play random) and one song. Only can listed to the song. No idea why it doesn't play the podcasts.
Help anyone?
Thanks again
Message was edited by: MGLVGLM

well, it seems that I have found the solution (i read somewhere, not already checked)
Since ipod shuffle 3G, you have to add podcasts to a playing list, otherwise you can't listen to them.
If I get it solved, I will write here for the next who doesn't receive much help from Apple and has to google the solution.

My iTunes suddenly stopped working and doesn't recognize any of my devices and gives me a AMD error. I've tried several times to uninstall all Apple programs and reinstall to no avail. I'm running windows 7 on a Dell laptop. It worked fine for years .

My iTunes suddenly stopped working and doesn't recognize any of my devices and gives me a AMD error. I've tried several times to uninstall all Apple programs and reinstall to no avail. I'm running windows 7 on a Dell laptop. It worked fine for years then I decided to update my iPhone 4S and it didn't recognize it or any other iPod or iPad.
Can someone please help ?

I am having all sorts of problems with 9.1.1.Crashes and not only iTunes but I have to restart all the time.
GET TO WORK APPLE !!!!

Since last update on itunes, my PC doesn't detect any of my devices. HELP!

Since I downloaded the last version of iTunes my PC doesn't detect any of my devices (ipad, ipod, iphone). Have been connecting my devices to the PC, when opening iTunes there is a legend, with the ipod saying that itunes doesnt detect the device to uninstall itunes and reinstall, have done it twice and the problem is still there. Just bought a new ipad and when I connect it to the PC iTunes doesnt detect it. When connecting my iPhone same thing happens, when I try to export the photos to the PC the folder where the photos are suppossed to be has no photos

Hello andreaparra,
Thanks for using Apple Support Communities.
I found the following article that will help you in resolving this issue, where none of your devices are being recognized by iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you get to the part where it asks you to uninstall iTunes, even though you have done it before, be sure to uninstall iTunes and the other components in the order listed.
Take care,
Alex H.

Help! iTunes doesn't recognized any of our devices. What can I do?

Help! iTunes doesn't recognized any of our devices. What can I do?

http://support.apple.com/kb/ts1591

External hard drive doesn't appear in /dev/sd*

My 7 month old external hard drive (http://www.newegg.com/Product/Product.a … 6822136471) doesn't seem to work anymore. It doesn't appear in /dev/sd* nor 'sudo lsusb'. It used to work fine. I've tried multiple usb ports, multiple computers, and multiple OS (linux and windows). Any ideas what I could try next? Are there any tools to diagnose the problem further?
My last resort options are
1) take the drive apart and plug it into a desktop computer (probably invalidates warranty)
2) pay for data recovery (it's a personal hard drive. i'm not sure if this is overkill or expensive)
Any advice?

Using a data recovery service might get a little expensive, it all depends on how important the data is and how much it will cost you to generate it again or replace it.
If the recovery job is simple as in just taking the disk out of the enclosure and copying the data to another disk then I guess it might not be too expensive. Some data recovery companies do provide a (free?) quote on how much it will cost you and others even state how much the more common data recovery tasks cost. If the data recovery company has an agreement with the disk manufacturer then the warranty will not be void and you can claim it and get a new disk.
If you plan to do it yourself be ready to make a full disk image and then copy your data out of the image (look into ddrescue and sparse disk images, works wonder if the disk is not too full), you don't know the cause of the controller failure and it might be that the hard disk is not in good shape too and will only live long enough to reliably extract all the data or do a full disk image a couple of times.

Drive doesn't recognize ANY DVDs or CDs?

Can someone explain real simple stupid like how to try to get my DVD/CD player to recognize disks again. I have a PIONEER DVD-RW DVR-103 in my G4 am using Tiger 10.4.3. After installing Tiger my computer has fallen to pieces and this is the last one. Now I am seriously considering cleaning out the entire machine and starting anew as I have a G5 on order. Problem is how can I even reinstall is my DVD drive won't recognize any disks? It spins and spins and spits out the DVD. It will read nothing.
Thanks, Steph

One day the Pioneer DVR-106 drive I had in my G4 MDD stopped working it would accept disks. I tired everything. calls to apple care didnt help since this was an upgrade I added. I read everything on every site.
finally took the drive out of the computer and as I turned it over I heard a rattle. it had never rattled before. A search of posts on www.xlr8yourmac.com lead me to a posting about parts inisde the drive failing and in some cases some miniscule part could cause the drive to fail to read any disc. I was at my wits end and decided what the heck I was planning on Buying a new DVD-R drive anyway, so I opened the puppy up. I put everything out on my white utility table and took care to track every screw. To give me a reference point to how the drive looks and works I took apart a different CDROM drive that no longer worked. I noticed both units were similar internally.
well to make a long story short the culprit was a piece of dust that had got onto the Laser Lens and a piece of metal, some spring that lodged itself near the midle. It was magnetized and stuck to the drive middle area. I took the piece out and crossed my fingers. put it back together and decided to put it in an External 5.25" FW400 case which i have a few siting around for when I pull old HD's. Plugging in the now external Pioneer DVR-106 the unit turned on a-ok and voila the Mac recognized it and was able to read every DVd and CD and perfomred a succesflu burns for many DVD data discs and Audio CD's.
I posted my experience on xlr8yourmac.com and I am pretty sure I lucked out. But hey worse comes to worse, you can always pop that puppy open and see whats there. never know.
good luck anyway and you probably just better of to buy a new OEM Pioneer Superdrive, OWC aka macsales.com has some good bundles also Newegg.com has better deals for people who just want the Bare drive sans disks, cables, etc.

I installed Lion, now my dvd drive doesn't recognize any files on dvd. Please help.

I'm a photographer with tons on images on dvd and my dvd drive now doesn't recognize any files on any of my dvd's. Help!!!

After 3 trips to the Apple store this week, the issue is still unresolved. The photo dvd's open just fine on Snow Leopard, but are not recognized at all on Lion. I'm guessing since the DVD's were originally burned on a PC, they will no longer work. After finding out that PowerPC is no longer recognized by Lion and I can no longer use Nikon NX2 (Photo editing software), I will be re-installing Snow Leopard. According to the Apple store in Lancaster, Pa. there is no refund available for my Lion purchase. I have a ton of photo DVD's, most of which will not open since I've only recently switched to an IMAC system. It has made me think about returning to the PC world. I'm VERY unhappy with these developments and I really need to re-think my computer situation. I don't do much else besides photography. My purchases and time spent with my IMAC has aparently been a great waste.

Why were the colour icons taken away from the finder and itunes sidebars and and replaced with grey monochrome shade icons. It doesn't make any sense.

Why were the colour icons taken away from the finder and itunes sidebars and and replaced with grey monochrome shade icons.
Have apple rectified this yet ?
It doesn't make sense to me why they changed this. Can anyone tell me the reason for the lack of colour ?
On another note, can the the sidebar be changed back to the right hand side in preview (when opening PDF's). It has always been on the right in snow leopard and tiger.
It seems to me that their has been too many unnecessary changes in the Lion operating system.
Thanks.

babowa wrote:
Why were the colour icons taken away from the finder and itunes sidebars and and replaced with grey monochrome shade icons.
Have apple rectified this yet ?
It doesn't make sense to me why they changed this. Can anyone tell me the reason for the lack of colour ?
You'd have to ask Apple, no one here would know - we are just users like you and aren't allowed to speculate on these forums. You have quite a bit of company though - many people preferred the color.
And, I've not found a way to put the sidebar back on the right side in Preview, but maybe someone else can chime in with that.
I much prefer the sidebar a la sinistra

When I used to receive emails it would make a beep now it doesn't make any noise

it will not even make the *whoosh* sound anymore.
My volume is up
I checked the mail settings and the sound were all on, then I checked the system prefreces in the sounds menu and that appeared to be fine
Any suggestions?

So you checked Mail Preferences and have a sound chosen in the "new messages sound"?
When you check the Sound Preference Pane, did you also check the Output option: are the internal speakers chosen for the sound output?

Double aggregation in a single query block doesn't make any sence.

How can I argue with something that apparently has been cast in stone by ANSI SQL committee? Well the answer is famous: "Search any park in any city: you'll find no statue of committee".
OK, why
select count(1) from (
select deptno from emp
group by deptno
is an easy to understand query, and why
select count(count(*)) from emp
group by deptno
is not? I already mentioned one reason why count shouldn't accept any arguments, therefore count(count(*)) is a nonsence.
The other reason is that aggregation without grouping is essentially aggregation within a single group. Once you realize that
select sum(1) from emp
is the same as
select sum(1) from emp
group by -1
(where -1 or any other constant for that matter is a dummy pseudocolumn), then it becomes obvious that what we are doing in the infamous
select count(count(*)) from emp
group by deptno
is a query with two blocks
select count(1) from (
select deptno from emp
group by deptno
) group by -1
We are not allowed to combine two "group by" into a single query, aren't we?

Aggregate function always goes together with grouping. Grouping can partition the set of rows into many classes or a single class. Therefore, if we have 2 nested aggregation functions, we'd better be able to identify the corresponding groupings easily:
select state, avg(min(tax_return)) from household
group by city, state then statewhich is a shorthand for
select state, avg(m) from (
   select city, state, min(tax_return) m
   from household
   group by city, state
) group by stateSpeaking of double aggregation, it is frequent in graph queries. The part explosion query is posted repeatedly virtually every month on this fine forum:-) The part explosion is double aggregation: multiply the quantities along each path in the assembly hierarchy. Then add the quantities along alternative paths. Likewise, finding a shortest path between two nodes in a graph is double aggregation query. First, we calculate the length buy adding the distances along each path, and then we choose a path with minimal length. Wouldn't it be nice to have this double aggregation wired into the connect by syntax? Note that connect_by_path is a surrogate aggregate which concatenates strings. People invent all kind of functions which parse this path and make other aggregates out of this value (such as sum and product).

ICloud Drive Doesn't Show Any Other Folders

Hello, today when I opened up pages to edit a file, I noticed that I couldn't access it on my iPhone. I went to Pages (the folder in iCloud Drive) and it looked as if it was uploaded. I then went to a new finder window and went to iCloud Drive. It shows nothing but one folder I created to store other files. Why can't I access any other file and why won't they upload?

Update: it seems as if any documents on my iPhone are also not being uploaded. How can I get these to sync?

Iphone 3Gs won't update i get an error message that says i am not connected to the internet. i HAVE TRIED ALL THE RECOMENDED TROUBLESHOOTING. ITUNES UPDATE WAS SUCCESSFUL AND I AM NOT HAVING ANY TROUBLE WITH THE ITUNES STORE. SO IT DOESN'T MAKE ANY SENSE

When I go to sync my iphone 3gs itunes alerts me that an update is available. I check to download an update. I then receive an error message stating that I am not connected to the internet. I am 100% positive that I am connected and before this download I was instructed to update itunes which I did without any problems and restarted my computer. I have tried all of the troubleshooting suggestions. I have no problem syncing or using the itunes store. I just can't get the update. I also have no problems with my iphone connecting to a wireless internet connection. Please Help!!!!!!

http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125
http://support.microsoft.com/kb/299357

HT201328 Want to go overseas and need my virgin mobile iPhone 5 unlocked so I can use it in europe. Called VM and they said it can't be done. That doesn't make any sense.. What can be done?

Have Virgin Mobile iPhone 5 and they said it can't be unlocked. Reason to get it unlocked is so I can use the phone when travelling in Europe. This is crazy because I also payed for the phone in full... Also, what happens if you move to a region in the U.S. and service is bad...Your stuck with an expensive brick.. Any way to get it unlocked?

Not all carriers unlock their phones. They are under no legal obligation to do so in many places.

Mos7720 driver doesn't make any /dev/parport devices

Similar Messages

Maybe you are looking for