Mosaic screensaver not using the right photos

I'm having a problem with the mosaic screensaver in Leopard.
When I choose a folder of pictures for the screensaver, it works fine in slideshow and collage mode.
However, when I choose mosaic mode, it will display the first image in the folder, but will display images in another folder I was using previously all around it as the mosaic.
This happens in the test and the real screensaver as well. Happens with any other folder I choose, and still happens after restarting. Help!

Update: With some experimenting, I've discovered that it makes the correct photos in mosaic form, but the photos used as parts of the mosaic are all from my iPhoto library!

Similar Messages

Optimizer is not using the right index

Hi gurus,
there's something I understand. If someone can explains, it'll be greatly appreciated.
Env:
10gR2 on Redhat AS
The
SQL> desc stock_detail
Name Null? Type
NO NOT NULL NUMBER(15)
BP_CODE NOT NULL VARCHAR2(10)
STOC_CAT_CODE NOT NULL VARCHAR2(6)
BUIL_CODE NOT NULL VARCHAR2(8)
LOCA_CODE NOT NULL VARCHAR2(8)
LOCA_SUB_CODE NOT NULL VARCHAR2(6)
ITEM_NO NOT NULL NUMBER(8)
QTY NOT NULL NUMBER(6)
DEFAULT_SHELF NOT NULL VARCHAR2(1)
CREATION_DATE NOT NULL DATE
CREATION_USER NOT NULL VARCHAR2(8)
CM_NO NUMBER(15)
LANDING_COST NUMBER(11,2)
SUPPLI_COST NUMBER(11,2)
RMA_DEADLINE DATE
MOD_USER VARCHAR2(8)
MOD_DATE DATE
RECEP_DATE DATE
NOTE VARCHAR2(2000)
FLAG VARCHAR2(1)
REFUS VARCHAR2(1)
STOC_MOVE_REAS_CODE VARCHAR2(6)
I have many indexes on this table. (like 5 or 6).
There's one with item + business_unit (lets say INDEX_A)
And there's one with item + category + business_unit (lets say INDEX_B)
The following sql is always using the wrong index
select nvl(sum(sd.qty),0)
from stock_detail sd, location lo
where sd.item_no = 419261 <- In INDEX_A & INDEX_B
and sd.STOC_CAT_CODE='REG' <- In INDEX_B
and sd.bp_code = 'TECMTL' <- In INDEX_A & INDEX_B
and sd.buil_code <> 'TRANSIT'
and sd.buil_code = lo.buil_code
and sd.loca_code = lo.code
and sd.loca_sub_code = lo.sub_code
and nvl(lo.restricted, 'N') = 'Y';
This SQL always use the INDEX_A. INDEX_B is far better.
Stats of the index uactually used (INDEX_A):
Last Analyzed 2007-10-18 22:04:38
Blevel 1
Distinct Keys 72124
Clustering Factor 105368
Leaf Blocks 339
Average Leaf Blocks Per Key 1
Average Data Blocks Per Key 1
Number of Rows 110285
Sample Size 110285
Stats of the index I want to be used (INDEX_B)
Last Analyzed 2007-10-18 22:04:46
Blevel 2
Distinct Keys 77407
Clustering Factor 103472
Leaf Blocks 551
Average Leaf Blocks Per Key 1
Average Data Blocks Per Key 1
Number of Rows 110285
Sample Size 110285
Is there a way to use the right index without adding a hint?
Thanks in advance.
Message was edited by:
(made a mistkae on the stats of index B)

I assume the execution path is a nested loop driving of the table with the constant inputs.
The key difference in the stats is that the second index has a blevel of 2. I'd guess that the cost of using the first index is 1, and the cost of using the second index is three.
The basic cost of accessing a table through an index is:
blevel +
index selectivity (ix_sel) * leaf blocks +
table selectivity (ix_sel_with_filtering) * clustering_factor.
However, if the blevel is 1, then Oracle ignores it.
Your index and table selectivities in both cases are 1/distinct_keys (since this is 10.2)
The numbers involved with the leaf block and clustering factor calculations are so small (and similar) that the difference of 2 in the add-on for the blevel is the deciding factor.
According to the statistics, though, the choice of index shouldn't make much difference to the performance, since the number of rows (and blocks) visited is likely to be the same. However, if you have an uneven distribution of values for individual columns, you may need a histogram on that column so that the optimizer can see the effect it has on the expected work.
Regards
Jonathan Lewis
http://jonathanlewis.wordpress.com
http://www.jlcomp.demon.co.uk
P.S. I suppose it's probably fair to mention that I wrote a pretty good book about how the optimizer works: http://www.jlcomp.demon.co.uk/cbo_book/ind_book.html

I have two Appel Id's but it's not using the right one how do I get it to use the right one?

Okay I just got my iPhone 4 a month or two ago as a present so my mom and sister set up my apple Id without me and I don't want that id because I can't get in it so I made another one but it's still using the Id my mom and sister made up!!:/ so how do I make it use the other Id?

SETTINGS - STORE - Sign out and sign in again with the ID of your choice.

Itunes not showing the right photo count when I synch to iPhone

When I go to synch my iPhone 4S and my iPad the photo count on my photo albums are not showing that all of my pictures are there to synch. Also, it does not synch all of my photos.
Any ideas?
THanks in advance for the help!

Try here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

Elements 8 when in file location view the thumbnail is not the right photo

When I click on a file folder location the thumbnail that opens in not the right photos for that file folder. I have run catalog repair and optomized the catalog. I don't know much about the database but think it must be messedup. I need to move my photo's to a external hard drive as my laptop hard drive is full. This is when I first saw this problem. I have moved only 8 photos. I have a about 4500 photos and did not want to have to move them one at a time. Also I store everything by date. I have elements 8 and primiere 8 with windows 7

Mona-R wrote:
I am not sure how to do this but I do have more than one EHD that I could use. I can backup to one hard drive and restore to another. Will this move the catalog file from my internal hard drive to the EHD? If so what does that do to my internal hard drive that has the program files orginal installed on them. Guess what I need is a step by step instructions as I have not done this before and don't want to loss everything but could reinsall if I have to. If it come to that would like to have my photos on the EHD and upgrade my program to PSE 10. or maybe move to lightroom if that is a better program. I am at a stand still as my internal hard drive can't hold any more.
First step is to create a backup on one of your external hard disks. This will be useful anyway, should you upgrade computer or PSE version later.
- create a new folder in the external disk.
- start the backup from the organizer file menu, choose a backup name and select the destination drive and the folder you created. Note the size of the backup to be sure you have enough space on the external disk. It's good to have twice the necessary space.
Wait for the message telling the backup is finished ; don't close the organizer too soon, this message does not appear immediately.
You can check if the backup is complete by looking into the destination folder. It should contain a backup.tly file.
This backup can be used to restore your catalog and image files either to the original location or any location on any disk.
Now, you are ready to restore your backup to another external drive.
Same as before, create a new folder with the name you want to give to the new catalog.
Run the menu restore and choose 'custom location'
The restore will create a new catalog of the name of the folder, and put both the files constituting the catalog and the folder structure of your image files in the folder you created.
As a result, you'll have a new catalog to be found in the catalog manager under 'custom location', which means it is situated on your second external hard drive.
If you want to move the catalog to the default location on your old drive, that's possible from the file menu of the organizer. This will move your catalog, not your image files. It's not necessary, but you can do it.
Nothing will be changed to your old computer, so you'll be able to compare the old and new catalogs and the original and the copies of your images.
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Move_your_photos_1

HT201209 iTunes will not use the redeemed gift cards on my account, I have a $30 credit and when I try to purchase a song it goes right to my credit card on file. Why does this keep happening

iTunes will not use the redeemed gift cards on my account, I have a $30 credit and when I try to purchase a song it goes right to my credit card on file. Why does this keep happening???

Any time you've changed anything in your billing, it does this once to very things.

HT4235 my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection? i just want it to connect to my itunes again!!!

my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection?
i just want it to connect to my itunes again!!!
Thank you to anyone and everyone that manages to help!

Hello webster995,
Thank you for the details of the issue you are experiencing with your iPhone not appearing in iTunes. I recommend following the steps in the article below to troubleshoot the issue you described:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

I have CS4 and was using a Canon 5D Mark II with raw photos. I just got the Canon 5D Mark III and CS4 now can not read the raw photos. It has raw version 5.7.0.213 and CS4 version 11.0.2. Can anyone help?

I have CS4 and was using a Canon 5D Mark II with raw photos. I just got the Canon 5D Mark III and CS4 now can not read the raw photos. It has raw version 5.7.0.213 and CS4 version 11.0.2. Can anyone help?

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
EOS 5D Mark II
CR2
5.2
2.2
EOS 5D Mark III
CR2
6.7, 7.1
4.1
Photoshop CS6
7.0
8.3
Photoshop CS5
6.0
6.7
Photoshop CS4
5.0
5.7
The 5D Mark II was first supported by Camera Raw 5.2 which is compatible with CS4+.
The 5D Mark III was first supported by Camera Raw 6.7 and 7.1 which is only compatible with CS5 and CS6.
So the CS4 will never be able to open Raw 5D Mark III files.
Why doesn’t my version of Photoshop or Lightroom support my camera?
Choices:
Purchase CS6 full version (CS4 is too old to qualify for an upgrade)
Join the Cloud
Free option: download the free Adobe DNG converter, convert all 5D Mark III Raw files to DNG format then edit the DNGs in CS4
Photoshop Help | Digital Negative (DNG)

How can you sync ipad 2 photos to pc not using the cable or icloud sync?

How can you sync ipad 2 photos to pc not using the cable or icloud sync? Is there a way to do this via wi-fi network, How can you sync ipad 2 photos to pc not using the cable or icloud sync? Is there a way to do this via wi-fi network

Thanks for that, that was my first suggestion but he wants to not email either. His problem is he used his old nokia to do it and it was fine, now anything other than that he thinks is too much hassle.

HT4236 I've been using the iCloud Photo Stream with my PC for few months already. It work fine every time, but suddenly not work for today

I've been using the iCloud Photo Stream with my PC for few months already. It work fine every time, but suddenly not work for today

Hey lalitgupta,
Thanks for the question. The following article provides troubleshooting steps for Photo Stream:
iCloud: Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
Thanks,
Matt M.

I have downloaded the latest version of Lightroom but I so not see the option Photo Photo Merge in order to use the new HDR

Cannot figure out what is wrong. It says my lightroom is up to date but not showing the option photo>photo merge so I can use the new HDR function in Lightroom. Is anyone else having this problem?

Contact Adobe. That is what I finally had to do. the number is 1-800-833-6687. There was a problem with a file. They took over my computer and got everything working for me.
Shane

Why are my photos below and not to the right?

I have a layout problem and it's driving me nuts. The code I have for a page is a hodgepodge of sorts and I cannot, for the life of me, figure out how to get two pictures to be on the right hand side.
This is what I want it to look like:
But all I can get it to look like is this:
The lightbox photos are below the form. Not to the right of the form as I want them to be. I'd be very grateful of any advice the community can offer. I'm tech savvy; I'm a genius the apple store. But I haven't worked in Dreamweaver before and this is, apparently, pushing the limits of what I can do. The site is from a template so there is a great deal of superfluous code.
Thanks in advance.
James.

Correct these problems first http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fweb.me.com%2Fjames.veitch%2FGMedi a%2FContact.html then come back here if your problem still exists.
Gramps

HT2216 I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. Any clues?

I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. I only have a previous version re-install disc as I bought the latest OSX off the app store. Any help gratefully received?

Hmmm, no, no drivers needed, now it sounds like a bad install... unless you might have some old Mouse software installed???
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

IMAQ Quantify rseults with use of image mask are not of the right regeons

I'm using the IMAQ quantify VI from labview to analize a binairy image. This binairy image is an 8bit image that consists only of pixels with the value 0 or 1. The places of the binairy image where the pixels have the value 0, mean that a corresponding image has not data in that place. A pixel value of 1 means that there is data that should be processed later in the program in the corresponding image.
The quantify function is also used to devide the image in 666 regeons with the use of the image mask input. These regeons are squares of 22x22 pixels. The image mask consists of 666 regeons (horizontally 74 sqaures, vertically 9 sqaures) and each of the regeons has his own regeonal number. The resulting regeonal report is used to decide whether each regeon has data in it or not, with the use of the mean value in the report. When the mean value is equal to 0 than it is sure that there is no data in that regeon since all the pixels in the regeon have to have the value of 0. If the mean is not 0 at least one of the pixels in that regeon has the value of 1, wich means that there is data in the regeon. The image mask is created from an 2D array wich is converted to an 16 bit image with the use of IMAQ ArrayToImage.
I've checked that the input data is correct: the binairy image consist of only 1 and 0 values, the image mask is consist of 666 sqaures of 22x22 pixels and each sqaure has pixels in it with the value corresponding to the regeonal number of the sqaure, the binairy image and the image mask have the same size, the image mask is an 16 bit image and both images have the same border size (3).
Two problems occur:
1) The regeonal report doesn't consist of 666 elements, but of 665 elements (element 0 to 664)
2) The data in the regeonal report is not of the right area's. It looks like the data is shifted one to the right in the regeonal report array, the data in element 0 isn't from regeon 0 but from regeon 1, element 1 corresponds to regeon 2, and so on. I'm haven't checked if the data is exactly of the next regeon, but I suspect it because of the regeonal report array being one short. But it is also possible that the regeons aren't placed on the right place in the binary image.
If someone else occured this problem with the IMAQ Quantify function or has a solution to it, I would really apreaciate a reply.

Isn't there anybody who encountered the same problem or with an solution?

I have a 309g photosmart prem. I can not use the HP advanced Photo paper 10.5 mil Lb paper

I have a 309g photosmart prem. I can not use the HP advanced photo paper 10.5mil Lb paper, when It feeds through it says mismatch. I have change the settings and everything, my same paper that is 4x6 works but not the 8x10?
Help I want to print a 5x7 and the paper will not go through?

In case you are not getting the option to select the paper from PSE, you can go to printer settings through the icon present in the print dialog box, there you can select the paper. The paper selected in the advanced options should be reflected in PSE as well.

Mosaic screensaver not using the right photos

Similar Messages

Maybe you are looking for