Moss 2007 and 2012 server (sql server 2008 r2)

Currently
1 sharepoint server (window 2003)
1 sql server (window 2003) running sql server 2005
want to go
1 sharepoint server (window 2008 R2)
1 sql server (window 2012) running sql server 2008 R2 
Anyone know if that will work?

Yes, it will work. Refer to the following articles for more information
https://technet.microsoft.com/en-us/library/cc288690(v=office.12).aspx
http://blogs.msdn.com/b/mikewat/archive/2008/08/11/upgrading-sharepoint-sql-servers-to-sql-server-2008.aspx
Cheers,

Similar Messages

  • Difference between database features - SQL Server 2008 R2 navtive vs SQL Server 2012 with SQL Server 2008 compatibility set?

    I am investigating the impact of upgrading from SQL Server 2008 R2 to SQL Server 2012. To reduce the impact of the upgrade, I am planning to restore / create our application database onto SQL Server 2012 with compatibility level 100 (SQL Server 2008 and
    SQL Server 2008 R2).
    Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?

    Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?
    Yes there can be difference and impact there are few features deprecated in SQL Server 2012 you must be aware about that. Please see
    Deprecated Database Features in SQL Server 2012
    Deprecated SQL Server features in SQL Server 2012
    After you migrate database to 2012 please don't move ahead with production unless you have tested your application to new created database
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • Installing SSMS 2012 after SQL Server 2008 R2 Express was installed (without tools)

    Hi everybody,
    This is a question in another forum I am frequent. Someone installed SQL Server Express 2008 R2 and he used the wrong exe, so he installed it without tools. Now he wants to install SSMS.
    It looks like SSMS 2012 wants to have SQL Server 2012 Express installed first.
    Can someone please confirm if it's possible to install just SSMS 2012 after SQL Server 2008 R2 Express was already installed and if possible, guide through the installation steps?
    Thanks a lot in advance.
    For every expert, there is an equal and opposite expert. - Becker's Law
    My blog
    My TechNet articles

    Hi Naomi,
    Agree with Shanky.
    I have tested the scenario you described. Everything works well, I successfully install SQL Server Management studio 2012 after SQL Server 2008 R2 Express (without tools) was already installed.
    Please note that we don’t need to install SQL Server 2012 Express first when installing SSMS 2012. For detailed installation steps of SQL Server 2008 R2 Express and SSMS 2012, you can review below blogs.
    How to Install SQL Server 2008 R2 (Express Edition)
    SQL Server Management Studio – A step-by-step installation guide
    In addition, we can use SSMS 2012 to manage SQL Server Express 2005 /2008 /2008 R2, the tool is backward compatible.
    Thanks,
    Lydia Zhang
    If you have any feedback on our support, please click
    here.
    Lydia Zhang
    TechNet Community Support

  • I have enabled both the traces 1204 and 1222 in sql server 2008 but not able to capture deadlocks

    In Application error:
    2014-09-06 12:04:10,140 ERROR [org.apache.catalina.core.ContainerBase] Servlet.service() for servlet DoMethod threw exception
    javax.servlet.ServletException: java.lang.Exception: [ErrorCode] 0010 [ServerError] [DM_SESSION_E_DEADLOCK]error:  "Operation failed due to DBMS Deadlock error." 
    And
    I have enabled both the traces 1204 and 1222 in sql server 2008 but still I am not getting any deadlock in sql server logs.
    Thanks

    Thanks Shanky may be u believe or not but right now I am in a migration of 4 lakh documents in documentum on Production site.
    and the process from documentum is halting due to this error but I am not able to get any deadlock in the sql server while the deadlock error is coming in documentum:
    [ Date ] 2014-09-06 17:54:48,192 [ Priority ] INFO [ Text 3 ] [STDOUT] 17:54:48,192 ERROR [http-0.0.0.0-9080-3] com.bureauveritas.documentum.commons.method.SystemSessionMethod - ERROR 100: problem occured when connecting repository! DfServiceException::
    THREAD: http-0.0.0.0-9080-3; MSG: [DM_SESSION_E_DEADLOCK]error: "Operation failed due to DBMS Deadlock error."; ERRORCODE: 100; NEXT: null at com.documentum.fc.client.impl.connection.docbase.netwise.NetwiseDocbaseRpcClient.checkForDeadlock(NetwiseDocbaseRpcClient.java:276)
    at com.documentum.fc.client.impl.connection.docbase.netwise.NetwiseDocbaseRpcClient.applyForObject(NetwiseDocbaseRpcClient.java:647) at com.documentum.fc.client.impl.connection.docbase.DocbaseConnection$8.evaluate(DocbaseConnection.java:1292) at com.documentum.fc.client.impl.connection.docbase.DocbaseConnection.evaluateRpc(DocbaseConnection.java:1055)
    at com.documentum.fc.client.impl.connection.docbase.DocbaseConnection.applyForObject(DocbaseConnection.java:1284) at com.documentum.fc.client.impl.docbase.DocbaseApi.authenticateUser(DocbaseApi.java:1701) at com.documentum.fc.client.impl.connection.docbase.DocbaseConnection.authenticate(DocbaseConnection.java:418)
    at com.documentum.fc.client.impl.connection.docbase.DocbaseConnection.open(DocbaseConnection.java:128) at com.documentum.fc.client.impl.connection.docbase.DocbaseConnection.<init>(DocbaseConnection.java:97) at com.documentum.fc.client.impl.connection.docbase.DocbaseConnection.<init>(DocbaseConnection.java:60)
    at com.documentum.fc.client.impl.connection.docbase.DocbaseConnectionFactory.newDocbaseConnection(DocbaseConnectionFactory.java:26) at com.documentum.fc.client.impl.connection.docbase.DocbaseConnectionManager.getDocbaseConnection(DocbaseConnectionManager.java:83)
    at com.documentum.fc.client.impl.session.SessionFactory.newSession(SessionFactory.java:29) at com.documentum.fc.client.impl.session.PrincipalAwareSessionFactory.newSession(PrincipalAwareSessionFactory.java:35) at com.documentum.fc.client.impl.session.PooledSessionFactory.newSession(PooledSessionFactory.java:47)
    at com.documentum.fc.client.impl.session.SessionManager.getSessionFromFactory(SessionManager.java:111) at com.documentum.fc.client.impl.session.SessionManager.newSession(SessionManager.java:64) at com.documentum.fc.client.impl.session.SessionManager.getSession(SessionManager.java:168)
    at com.bureauveritas.documentum.commons.method.SystemSessionMethod.execute(Unknown Source) at com.documentum.mthdservlet.DfMethodRunner.runIt(Unknown Source) at com.documentum.mthdservlet.AMethodRunner.runAndReturnStatus(Unknown Source) at com.documentum.mthdservlet.DoMethod.invokeMethod(Unknown
    Source) at com.documentum.mthdservlet.DoMethod.doPost(Unknown Source) at javax.servlet.http.HttpServlet.service(HttpServlet.java:637) at javax.servlet.http.HttpServlet.service(HttpServlet.java:717) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
    at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:182) at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104) at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
    at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447) at java.lang.Thread.run(Thread.java:619) (Log Path:SID CER > vmsfrndc01docpp > JMS_Log > server ,Host: vmsfrndc01docpp ,Apps: [SID CER, SID IVS])</init></init>
    Thanks

  • MOSS 2007 native mode on SQL 2012 with compatibility mode?

    We are on MOSS 2007 SP 3 64-bit (just native, it is not SSRS integration mode) running on SQL 2008 R2 SP2 64-bit. Can the databases move to SQL 2012 with compatibility mode?

    Hi,
    As far as I know, SQL 2012 is not listed as compatible with SharePoint 2007 on the
    technet articles. If you want to upgrade to SharePoint 2010, then you can move the databases and upgrade the database. If you just want to use SQL 2012 with SharePoint 2007, I think it is not applicable.
    For more information, please refer to these sites:
    SQL Server 2012 not supported on WSS 3.0/MOSS 2007 and versions previous than SharePoint 2010 SP1:
    http://blogs.msdn.com/b/calvarro/archive/2012/04/27/sql-2012-not-supported-on-wss-3-0-moss-2007.aspx
    SQL Server 2012 support:
    http://social.technet.microsoft.com/Forums/en-US/sharepointadmin/thread/02fd7238-9cc2-43fc-a46c-afbfca21210b
    Thanks,
    Entan Ming
    TechNet Subscriber Support in forum
    If you have any feedback on our support, please [email protected]
    Entan Ming
    TechNet Community Support
    Will it work with the database set with the compatibility mode ?
    /* Server Support Specialist */

  • What is the difference between SQL Server 2012 R2 & SQL Server 2014

    Hi all,
     I am using SQL Server from last 3 years. I started SQL Server 2008 R2. Now I am using SQL Server 2012. I want to change my development environment to SQL Server 2012 R2. But suddenly I saw that SQL Server 2014 is released. I want to know what are the
    differences between SQL Server 2012 R2 & SQL Server 2014. Are both those are the same or different products?
    I searched through the Internet but I didn't find any article regarding that. So could someone help me to solve this matter?
    Thanks,
    Regards,
    Chiranthaka

    differences between SQL Server 2012 R2 & SQL Server 2014.
    We don't have a Version "SQL Server 2012 R2", only 2005, 2008, 2008R2, 2012 and 2014.
    See MSDN What's New in SQL Server 2014
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Is it possible to transfer a database from SQL Server 2012 to SQL Server Express 2012?

    Is it possible to transfer a database from SQL Server 2012 to
    SQL Server Express 2012? Ideally I would like to backup the database from SQL Server 2012 and restore it on SQL Server Express 2012. Is that possible?

    Is it possible to transfer a database from SQL Server 2012 to
    SQL Server Express 2012? Ideally I would like to backup the database from SQL Server 2012 and restore it on SQL Server Express 2012. Is that possible?
    Yes it is possible but database size should not be greater than 10 G as max databse size supported for Express 2012 is 10 G
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • How to install sp2 for sql server 2012 , where sql server 2012 instnce is installed in cluster mode

    Hi Everyone,
    I want to install sp2 for sql server 2012, My sql server 2012 instance is installed in cluster mode.
    Please suggest the best practice to install sp2 , what are prerequisite and recommendation.
    Please share installation guide for sp2 in cluster instance, if any one have.
    Thanks All
    Aditya

    Did you searched a bit before posting question.
    Please read
    https://support.microsoft.com/kb/958734?wa=wsignin1.0
    http://blogs.msdn.com/b/john_daskalakis/archive/2014/09/05/how-to-install-a-service-pack-at-a-sql-server-2012-failover-instance-best-practices.aspx
    http://blogs.msdn.com/b/jason_howell/archive/2012/08/28/how-to-patch-sql-server-2012-setup-with-an-updated-setup-package-using-updatesource-to-get-a-smart-setup.aspx
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • One of server core 12 and showing in sql server 24. how it possible?

    Hello  everyone,
    I'm confused in sql server 2008 r2 when try to check no. of cores in sql server property are double in sql server and os showing 12 cores.
    one of my friend saying 1 cores= 2 processors. 
    What is happen behind that...
    Thanks in advance...

    Hi,
    Are you same person Baraiya Krit who posted below same question I have always observed question posted by you and Baraiya are same. if such is the case
    both should be merged and you should note not to post same question with different profile otherwise i have to report that as spam and your profile would be deleted. If such is case you are wasting people time
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/505a2871-a7fd-487e-b39d-788ff78b6c95/one-of-server-core-12-and-showing-in-sql-server-24-how-it-possible?forum=sqldatabaseengine
    If you are from same firm and different person why not post one question.
    Moderators please have a look
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • What is difference between 32 bit and 64 bit sql server memory management

    What is difference between 32 bit and 64 bit sql server memory management
    Thanks
    Shashikala

    This is the basic difference...check if helps:
    A 32-bit CPU running 32-bit software (also known as the x86 platform) is so named because it is based on an architecture that can manipulate values that are up to 32 bits in length. This means that a 32-bit memory pointer can store a value between 0 and
    4,294,967,295 to reference a memory address. This equates to a maximum addressable space of 4GB on 32-bit platforms
    On the other hand 64-bit limit of 18,446,744,073,709,551,616, this number is so large that in memory/storage terminology it equates to 16 exabytes. You don’t come across that term very often, so to help understand the scale, here is the value converted to
    more commonly used measurements: 16 exabytes = 16,777,216 petabytes (16 million PB)➤ 17,179,869,184 terabytes (17 billion TB)➤ 17,592,186,044,416 gigabytes (17 trillion GB)➤
    As you can see, it is significantly larger than the 4GB virtual address space usable in 32-bit systems; it’s so large in fact that any hardware capable of using it all is sadly restricted to the realm of science fiction. Because of this, processor manufacturers
    decided to only implement a 44-bit address bus, which provides a virtual address space on 64-bit systems of 16TB. This was regarded as being more than enough address space for the foreseeable future and logically it’s split into an 8TB range for user mode
    and 8TB for kernel mode. Each 64-bit process running on an x64 platform will be able to address up to 8TB of VAS.
    Please click the Mark as answer button and vote as helpful if this reply solves your problem

  • How to Select from Oracle 8i database and insert into Sql Server 2005 datab

    Hi how to Select from Oracle 8i and insert into Sql Server 2005.
    Source db as Oracle 8i
    Target db as Sql Server 2005.
    I need to select one table data from Oracle 8i & insert into Sql Server 2005
    Thanks

    Thanks Khan..
    Is there is any query (OPENQUERY) available for that?
    Regards..

  • How to install and configure the SQL Server

    Hi All,
    We have to install SQL server in the new server because the old server is crash and need to upgrade. Please advice How to install and configure the SQL Server to run SAP Business One 8.8 successfully and what part we do have to give attention.
    Kind Rgds,
    Steve

    Hi,
    Try this solution:
    The step-by-step installation guide can be found in the documentation included in the installation media. (\Documentation\SystemSetup\AdministratorGuide_SQL.pdf).
    Below are some important parts that you should pay attention to during the Installation process.
    Resolution
    Collation setting: It must be set as SQL_Latin1_General_CP1_CI_AS,even the company DB is non-english location. The company DB will be created as corresponding collation settings automatically.
    Instance and TCP Port : It is recommended to run SBO on default instance and TCP port 1433. Otherwise,some optional components such as B1i may not work properly.
    Native Client: SQL Server Native Client should be installed on every client machine to enable the ODBC connection to DB server.
    Rgds,

  • Loop Through Excel Files and Load into SQL Server Table

    I'm following the example here.
    https://www.youtube.com/watch?v=_B83CPqX-N4
    I'm pretty sure I did all the steps, but for some reason my project is not running.  I'm thinking there is a 32-bit or 64-bit issue lurking in here somewhere.
    Here's my error message.
    SSIS package "C:\Users\Ryan\Documents\Visual Studio 2010\Projects\Loop through Multiple Excel sheets and load them into a SQL Table\Integration Services Project1\Package.dtsx" starting.
    Information: 0x4004300A at Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
    Error: 0xC0209303 at Package, Connection manager "Excel Connection Manager": The requested OLE DB provider Microsoft.ACE.OLEDB.12.0 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode. Error code: 0x00000000.
    An OLE DB record is available.  Source: "Microsoft OLE DB Service Components"  Hresult: 0x80040154  Description: "Class not registered".
    Error: 0xC001002B at Package, Connection manager "Excel Connection Manager": The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine.
    For more information, see http://go.microsoft.com/fwlink/?LinkId=219816
    Error: 0xC020801C at Data Flow Task, Excel Source [2]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0209303. 
    There may be error messages posted before this with more information on why the AcquireConnection method call failed.
    Error: 0xC0047017 at Data Flow Task, SSIS.Pipeline: Excel Source failed validation and returned error code 0xC020801C.
    Error: 0xC004700C at Data Flow Task, SSIS.Pipeline: One or more component failed validation.
    Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
    SSIS package "C:\Users\Ryan\Documents\Visual Studio 2010\Projects\Loop through Multiple Excel sheets and load them into a SQL Table\Integration Services Project1\Package.dtsx" finished: Failure.
    The program '[5392] DtsDebugHost.exe: DTS' has exited with code 0 (0x0).
    I have 32-bit Excel and 64-bit SQL Server.  Is that the issue?  Can someone tell me what's wrong here?
    Thanks!!
    Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

    Sa-weeettttttt!!  Thanks.  I figured that's what it was.  For the benefit of others, this link shows you exactly how to make the modification recommended above.
    http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20run%20SSIS%20Packages%20using%2032bit%20drivers%20on%2064bit%20machine.htm
    Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

  • How to next consecutive node in binary tree and insert in sql server

    i need to find next node in this tree and insert in sql server ...
    dilip kumar

    It depends you data structure. How do you store this tree structure in the database? What's the database design? BTW, you can see this article which include a related sample :
    Custom Sort in Acyclic Digraph
    T-SQL e-book by TechNet Wiki Community
    My Blog
    My Articles

  • How to get a list of values used in the WHERE filter of stored procedures and functions in SQL Server

    How can I get a list of values (one or more) used in the WHERE filter of stored procedures and functions in SQL Server?
    How can get a list of values as shown (highlighted) in the sample stored procedure below?
    ALTER PROC [dbo].[sp_LoanInfo_Data_Extract] AS
    SELECT   [LOAN_ACCT].PROD_DT,
                  [LOAN_ACCT].ACCT_NBR, 
                  [LOAN_NOTE2].OFCR_CD, 
                  [LOAN_NOTE1].CURR_PRIN_BAL_AMT, 
                  [LOAN_NOTE2].BR_NBR,
    INTO #Table1
    FROM
                    dbo.[LOAN_NOTE1],
                    dbo.[LOAN_NOTE2],
                    dbo.[LOAN_ACCT]
    WHERE
                    [LOAN_ACCT].PROD_DT = [LOAN_NOTE1].PROD_DT
                    and
                    [LOAN_ACCT].ACCT_NBR = [LOAN_NOTE1].ACCT_NBR
                    and
                    [LOAN_NOTE1].PROD_DT = [LOAN_NOTE2].PROD_DT
                    and
                    [LOAN_NOTE1].MSTR_ACCT_NBR = [LOAN_NOTE2].MSTR_ACCT_NBR
                    and
                    [LOAN_ACCT].PROD_DT = '2015-03-10'
                    and
                    [LOAN_ACCT].ACCT_STAT_CD IN
    ('A','D')
                    and
                    [LOAN_NOTE2].LOAN_STAT_CD IN
    ('J','Z')
    Lenfinkel

    Hi LenFinkel,
    May I know what is purpose of this requirement, as olaf said,you may parse the T-SQL code (or the execution plan), which is not that easy.
    I have noticed that the condition values in your Stored Procedure(SP) are hard coded and among them there is a date values, I believe some day you may have to alter the SP when the date expires. So why not declare 3 parameters of the SP instead hard coding?
    For multiple values paramter you can use a
    table-valued parameter. Then there's no problem getting the values.
    If you could elaborate your purpose, we may help to find better workaround.
    Eric Zhang
    TechNet Community Support

Maybe you are looking for