Most ATV Menu items including reset do not respond
Most items under general settings do not work. Can not reset, change time, update etc...
Stephen, Thank you for the quick response! I tried resetting it with the down arrow menu command and also tried unplugging it for several minutes.
It is Really very strange!
The problem is that under settings - general:
all the buttons except for the first two (about, Name) do not work at all.
So it can't be a parental control or any other option issue as none of the buttons work including the reset button.
Also, it is not a remote issue as I can click on most other buttons and they work just fine.
Lastly, not sure if it is related... but Netflix quit working correctly at the same time and will only will play the first two minutes of a movie and then just quits.
Thanks in advance,
Devin
Similar Messages
-
I can see the main menu on TV but does not respond?
I have tried disconnecting Apple TV but can not get it to respond with remote, don't know what else to do, any suggestions?
No luck, remote does not let me go to settings to change anything. Tried holding down MENU key with right button for 6 seconds and will not respond. How frustrating, been trying for the last 2 hours and nothing. Appreciate your help....thanks.
-
What is the cost of repairing a 1st ten ATV. Flashing amber light and not responding to reboot.
Apple tv flashing yellow and not responding. Can it be repaired and if so whats the cost?
This is a user Helping user forum not an official Channel to Apple
And even if it was i doubt Apple could give you a fixing price before taking
A look at the patient -
The wheel on my IPod nano, 5th generation is unresponsive when I try to use the menu part to go back to previous books. It's also unresponsive when I try to reset by pushing the menu and center in at the same time. Can anyone help?
If you have double checked to make sure the hold switch is not activated, it may be a hardware issue with the iPod's click wheel, meaning you'll need to have it serviced.
Before doing that though, it might help to try and restore to factory settings in iTunes as well to rule out a software issue.
B-rock -
UPDATE: Resolved.
I discovered that it couldn't be done (without jailbreaking) and found that many people had the same problem and had done the same as me (by posting a question). I sent a feedback message back to apple and I figured that eventually apple would take heed to the many others that have the same problem as me.
I followed this discussion because it may come to a useful resolve...
https://discussions.apple.com/message/16975064#16975064
And here is a website that allows the remove-ation of items from an ATV (1st Gen). I suspect it will void warranty though... (scroll down to the post on Tue Aug 26th, 2008)
http://forum.firecore.com/topic/322
Sorry to disappoint...
C -
Group Policy question about setting Start menu items using devices and not users
I am using Windows Server 2003 and Windows Server 2008 R2 servers set up for use as Active Directory Servers.
What I am trying to do is lock down thin clients start menu options and I have been able to get this to work down to the user level. However, what I want to do is have it locked down on the machine level.
We have multiple users that use both "Thin Clients" with Windows 7 Embedded and we also have them using other PC's with using the same log in.
So, for example when you create an OU for "Thin Clients", I want thin client devices in there and when people log in to these thin clients then the start menu will be locked down. I want this to be user independent and thus I don't want Users
in the OU, but I want to lock down the start menu.
How can I do this with Group Policy Objects on a domain level?Hi,
you could achieve this using GPO loopback processing. It was designed for the purpose of applying settings from user GPO to a certain group of computers.
http://technet.microsoft.com/en-us/library/cc978513.aspx
MCP/MCSA/MCTS/MCITP -
I lost my physical remote for Apple TV and the Remote apps on all my other devices no longer control it. What can I do?
You need to find your old remote or buy a new one.
AC -
HT201406 What if the reset button not responding.?
WHat if I reset my iPhone 4 ,it is not working it still has a circle for long time and cannot do anything now?
Um, you can't. You need to get the device to Apple for service.
-
Alt+mnemonic key is not working properly for Menu Items
Assume there are two menus , File Menu with mnemonic Alt+F
and Save Menu with mnemonic Alt+S. File Menu contains the
menu items like PageSetup with Mnemonic S. Save menu has
the menu item Properties with Mnemonic P.
Pressing Alt+F opens the File Menu which has the menu item
PageSetup.Pressing S activates the PageSetup menu item.
Similarly Pressing Alt+S opens the Save Menu which has the
menu item Properties. Pressing P activates the Properties
menu item acion. But Pressing Alt+P also activates the
Properties menu item action(it is not the desired behaviour)
Pressing Alt+Mnemonic key has to open only the Menus.It
should not consider the menu items.
STEPS TO FOLLOW TO REPRODUCE THE PROBLEM :
1.Press Alt+F
2.File Menu is invoked
3.Press S
4. Invokes the menu item action
5. Press Alt+S
6. Save menu is invoked
7. Press P
8. Invokes the menu item action
9. Press Alt+P
10. Invokes the menu item action
EXPECTED VERSUS ACTUAL BEHAVIOR :
Pressing of Alt+Mnemonic key invokes the menu and also menu
item actions. If the same mnemonic is present in the Menu
it is giving the priority to Menu only.Pressing of Alt key
alone does not hiding the pull down menu
Expected Result;
Pressing of Alt+Mnemonic key has to list out the pull
down menu only.It should not consider the menu items with
the same mnemonic. If Alt key alone is pressed the pull
down menu has to hide.
REPRODUCIBILITY :
This bug can be reproduced always.
---------- BEGIN SOURCE ----------
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class JavaBug extends JFrame
public JavaBug()
// Create menu bar
JMenuBar menuBar = new JMenuBar(); // Create menu bar
setJMenuBar(menuBar); // Add menu bar to window
// Create first option on menuBar
JMenu m1 = new JMenu("File");
m1.setMnemonic('F');
JMenuItem m1o1 = new JMenuItem("PageSetup");
m1o1.setMnemonic('S');
m1o1.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
System.out.println("File/PageSetup was selected");
m1.add(m1o1);
// Create second option on menuBar
JMenu m2 = new JMenu("Save");
m2.setMnemonic('S');
JMenuItem m2o1 = new JMenuItem("Properties");
m2o1.setMnemonic('P');
m2o1.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
System.out.println("Save/Properties was selected");
m2.add(m2o1);
menuBar.add(m1);
menuBar.add(m2);
this.setTitle("Mnemonic Bugs");
addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
System.exit(0);
setSize(400,250);
show();
public static void main(String[] args)
JavaBug bug = new JavaBug();
Suggestions welcomed
punniyaI tried your code, but didn't get your "bug" using jdk 1.3 on windows 2000 (at my school).
Kind regards,
Levi -
Check menue item does not work
Hello,
I create a menu item MI_DEBUG of type Check in a submenu named EXTRAS_MENU.
In the menu item code I want to enable debug logging of the current user actions.
In the Menu Startup Code I set the status UNCHECKED.
When the user clicks the menu item I want the status to be changed to CHECKED and back on a second click
Menu Startup Code
DECLARE
mi_id MENUITEM;
BEGIN
mi_id := find_menu_item('EXTRAS_MENU.MI_DEBUG');
IF id_null(mi_id) THEN
my_debug.pl('EXTRAS_MENU.MI_DEBUG not found','zvc_menu.mmb Menu Startup Code');
ELSE
set_menu_item_property(mi_id,CHECKED,PROPERTY_FALSE);
END IF;
END;Menu Item Code
DECLARE
mi_id MENUITEM;
BEGIN
mi_id := find_menu_item('EXTRAS_MENU.MI_DEBUG');
IF id_null(mi_id) THEN
my_debug.pl('EXTRAS_MENU.MI_DEBUG not found','zvc_menu.mmb mi_debug');
ELSE
my_debug.pl('EXTRAS_MENU.MI_DEBUG found','zvc_menu.mmb mi_debug');
my_debug.pl('Status '||get_menu_item_property(mi_id,CHECKED),'zvc_menu.mmb mi_debug');
IF get_menu_item_property(mi_id,CHECKED) = 'TRUE' THEN
my_debug.pl('property(CHECKED) = TRUE','zvc_menu.mmb mi_debug');
set_menu_item_property(mi_id,CHECKED,PROPERTY_FALSE);
ELSE
my_debug.pl('property(CHECKED) = FALSE','zvc_menu.mmb mi_debug');
set_menu_item_property(mi_id,CHECKED,PROPERTY_TRUE);
END IF;
END IF;
END;But I never get the checked sign in the menu and every time my debug messages say, that the property CHECKED = 'TRUE'.
I even have tried it with PROPERTY_ON/OFF as some examples suggest, but it doesn't work.
Any ideas what is wrong with my code?
Forms [32 Bit] Version 11.1.1.4.0 (Production)
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
Regards
MarcusHm. In that case the only thing that comes to my mind is to apply the latest patchset for forms 11gR1 which is 11.1.1.6 if memory serves.Not possible, applying patches requires tons of tests for many applications.
Does it work in a previous version of forms?This is a new menu item and I have not other version available to test.
Another thing I found: When I open or close a form after clicking the menu item, then the check mark appears. Changing the label of an item works without opening a form.
Therefore I changed my Menu Item Code to
DECLARE
mi_id MENUITEM;
BEGIN
mi_id := find_menu_item('EXTRAS_MENU.MI_DEBUG');
IF id_null(mi_id) THEN
my_debug.pl('EXTRAS_MENU.MI_DEBUG not found','zvc_menu.mmb mi_debug');
ELSE
my_debug.pl('EXTRAS_MENU.MI_DEBUG found','zvc_menu.mmb mi_debug');
my_debug.pl('Status '||get_menu_item_property(mi_id,CHECKED),'zvc_menu.mmb mi_debug');
IF get_menu_item_property(mi_id,CHECKED) = 'TRUE' THEN
my_debug.pl('property(CHECKED) = TRUE','zvc_menu.mmb mi_debug');
set_menu_item_property(mi_id,CHECKED,PROPERTY_FALSE);
set_menu_item_property(mi_id,LABEL,'Debug on');
ELSE
my_debug.pl('property(CHECKED) = FALSE','zvc_menu.mmb mi_debug');
set_menu_item_property(mi_id,CHECKED,PROPERTY_TRUE);
set_menu_item_property(mi_id,LABEL,'Debug off');
END IF;
END IF;
END;Now when I click the menu item the first time, the label changes immediately, but not the check mark. When I click the menu item a second time without opening a form the label does not change, this means, that the property CHECKED is only changed, when a form is opend/closed.
Even better: The initial label id Debug, clicking the item should change it to+ Debug on+ and on subsequent clicks change between Debug on and Debug off
1. Click -> Label changes to "Debug on", check mark unchanged
2. open a form
3. Check mark is shown but label is the default Debug
4. close the form
5. Check mark is not shown, label is back to Debug on
6. Repeat step 2 - 5 with the same result
Different sequences of clicking and opening/closing forms give seemingly random combinations of check mark on/off and label texts.
Conclusion:
A menu check item is a very obstinate thing. I will not use it if I can avoid it.
Regards
Marcus -
Swiss iTunes Store on Apple TV (3) missing menu item
Having Apple TV (3) updated Sotware resetted and rebooted and still cant see the menue item movies. Seeing Potcast and all the usual menue items, exept potcast will not work (without any failure message, the screen remains black), all other working properly. When I change to a differnt store (US as an example) movies is available and working as well as podcasts are available and working.
Does somone has an idea how to overcom this issue?
Thansk and best wishes
ThomasThere are reports of TV Shows and/or Movies missing from users screens, initially it looked like this might be an issue in the UK only, but it may well be more widespread. It appears to be an issue that can't be fixed by the user, you will need to wait until this is resolved by Apple.
If you have other icons missing you may have an entirely different issue. -
PSE 7 Menu bar in Organizer will not display properly
I''m going through an instructional video on PSE 7. The video shows the menu bar in the organizer just to the right of the little house. My Organizer shows two > symbols in the middle of the area, with a drop down list of menu items. I'm not sure what's going on, but it seems that the menu bar might be locked or something like that. I have searched help for "menu bar" but found nothing on how to get the bar back. Can someone point me in the right direction to get the menu bar back?
As an asside............. Is there no help in the program itself? When I press F1 or click on help in the menu, I get directed to the Adobe web site. Does this mean that if you're not connected to the internet (using a laptop without wifi access etc) that you have no access to help files?
Thanks for your assistance.Thanks very much for your quick answer. I decided to just use the system font. If issues appear during editing, at least I'll know how to turn it off. I didn't want to lower the dpi. I had it set higher for a reason............ poor eyesight...
I've bookmarked that faq site. It looks like there's a lot of good information there.
Thanks again. -
Missing menu item attachment list in GOS regarding purchase order
Hello All,
I customized the archiving for different kinds of documents.
There is all quite good for example with sales orders or invoices. I can call the transaction codes to view a speacial document - in those cases VA03 / VF03 - , click on the special GOS-icon and select from the drop-down menu the attachment list. The attachment list opens as a popup and there I see all created PDF documents.
Only with purchase orders it won't work. Calling the ME23N and clicking on the GOS-icon the menu item attachment list is not active (light grey). With administration transaction OAAD I can see that there are archived PDF documents. So, the archiving works but still not the viewing of archived purchase orders.
How can I activate the attachment list in this case? Maybe I forgot to do something?
Thank you very much for your help!Hi,
Check if note 1506581 is present in your system,if not please implement the same.
Also check if in /SPRO -> IMG Customizing -> "Integration with
our mysap.com components" -> Supplier Relationship Management ->
Message Control -> "Activate Document Transfer"
the customizing is correctly set for BUS2012 (Purchase Order).
If not, please maintain this entry correctly and re-test the
scenario.
Regards,
Ashwini. -
How to add menu item in Virtual Folders Actions Menu
Hi ,
I am writting a custom component which will add some action on documents and virtual folder.
I am able to add the menu item for DocInfo, but not able to add Menu Item in Virtual Folders Actions Menu.
Please help!!
thanksI am able to add the menu item for DocInfo, but not able to add Menu Item in Virtual Folders Actions Menu.What exactly you are trying to modify? If web GUI, it should be following the same principles as your "DocInfo" changes (only the basis service is COLLECTION_DISPLAY). If you are trying to modify Desktop Integration Suite, I'm afraid there is no help (at least, I have not heard that DIS could be modified by custom components).
-
Why does form validation take effect when navigating menu items?
I am using JDev 10.1.3.3.
I have a data entry form where all the af:inputField's are set to Required=true. I expected that the mandatory fields should only be enforced if I click the form 's submit button.
However, when I navigate to another menu item from my menu bar without filling in the fields, the mandatory fields also get enforced (e.g. Required Messages on fields appear and I am forced to have to enter some data on the field before I am able to navigate to another menu item. ) Navigating menu items should imply I am not proceeding with the data entry and should allow me to navigate instantly, even if there are blank fields.
I notice the SRDemo also had this same behavior. Under "New Service Request", if you don't fill in a description and navigate to another menu item from the menu bar, it will complain and ask you to enter a problem description before switching tabs.
This is obviosly not the intended behavior. How do I change this behavior so that when I switch menu items, data validation will not take place?Hi
it happens cause the entire page is one form when you try to navigate out what it does is that it submits the form.
To avoid validation for particular links or buttons set their property immediate to "true"
hope this helps
Maybe you are looking for
-
Using multiple monitors on a Lenovo T420i and a docking station
I have a Lenovo 420i attached to a docking station which has 2 DVI ports nad one VGA port. One DVI port is being used, so I have one external monitor. I want a 2nd external monitor. Can I attach and use a second external monitor on either the 2nd
-
When using the "recognize text in multiple files using OCR" function if it runs into an error in one file it quits and neither that one nor any after are done. I don't see a way to change this. This is in Acrobat v9.0.0. And ideas on how to deal with
-
Adding invitees painful - please help
I'm trying to add invitees to an event. When I type their name/email address ical goes wild. I type "m" and iCal changes the letter to something else. I try to keep typing. I type "Matt" and iCal gives me the following (over four separate tries): jat
-
Hi , I am using the evaluation version of Robohelp 7. I am creating the TOC and some of the topics just dont get listed in the TOC, though they are in the topic list. So i have to drag and drop them in the TOC. I am using Vista, is it a vista thing o
-
Frustrated with clone stamp in CS5. Everytime I go to use it, it just moves the picture around as if I have multiple layers. Can anyone out there help with this?