Most cost effective solution for HD monitoring

MXO box to display, Deck Link through HDMI or simple steal a professional HD monitor and face the consequences. Too many options? any suggestions?
Much Thanks, Matt

Practically in use everyday for the past 2 years with the MXO. I use an MXO2 for editing on the road with my Macbook Pro (producer makes sure I'm booked in hotels with HDMI Flatscreens).
I also use the Blackmagic Intensity Pro for inexpensive HD monitoring. The card is cheaper than the TV I use to monitor.
best to you
dj

Similar Messages

  • Is it better to get an ipod repaired or just buy new?  Want the most cost effective solution.

    I have an Ipod Classic and a Nano that have issues. The Classic headphone jack does not work. The Nano only show the white Apple screen. These belong to my daughter who is very hard on her electronics.she is a runner and a gym rat.  Would it be worth is to have them repaired or just to replace. she has a birthday and Christmas coming up. Will the Apple store people be able to give me a reasonable answer without pressuring me into buying?
    Thanks for the advice.
    Willie Fiedler

    Cost of repair is going to depend on whether you have Apple do the repair or a third party service. Here is a list of Apple repair costs for the different generations and models of iPods.
    http://www.apple.com/support/ipod/service/prices/
    Note that Apple doesn't actually fix the device, but instead does an out of warranty exchange for an iPod of the same model, capacity, and generation for a flat fee.
    For third party service pricing, you'll need to do some of your own research.  Just Google "iPod repair" and you should get back a plethora of results to work through.  From there you can decide whether to go the repair or replacement route.
    B-rock

  • How to find most cost-effective fwdg agent at the time of shipment creation

    Dear Friends,
    I have a requirement of realizing the best cost effective transporter(forwarding agent) in the shipment document. Then how to do using the Transportation functionality of the ERP?
    There is a scenerio like I want to transport my goods from L to M. In system say i have a route XX for that, which gets automatically determined in the shipment document.
    Now on route XX, if i have 5 operative transportors, say A, B, C, D, E.
    Transporter A - provides services km-wise, kg-wise, fixed price as well as truck wise
    (Say if you opt for km-wise, charges are 15 rs/km, 10 rs/kg, fixed price of 15000 for full truck from A to B)
    Transporter B - Similar to Transporter A with different charges
    (Say if you opt for km-wise, charges are 18 rs/km, 7 rs/kg, fixed price of 14500 for full truck from A to B)
    Similarly other tranporters also have their charges.
    and Now at the time of shipment creation, how can i have some standard method, so that the system suggest the most cost effective transportor for my delivery ie. shipment i want to make or probabaly if there is some standard way to get the list of all available transporters on a given route at the time of shipement creation.
    Please suggest.
    Regards,
    Dipti.

    Hi Sandeepan,
    Thanx for ur reply.
    As per my requirement, there might be say 100 routes existing into the system and each route might have say 10 different transportors available. Now they want to know 1) the list of transportors available on the given route - (run time at the time of shipment creation) to be put into the forwarding agent field 2) Of the available (say 10 transportors) who will be the best/cheapest.
    As per your suggestion, the functionality helps after we put in the fwdg agent and then estimate his associated cost. But as in this case, since there are so many routes (associated so many transportors) they will not know whom to put in the field.
    Hence want to know if there is some standard functionality of SAP which might help us i) identifying the list of transportors on a particular route or a given criteria - run-time ii) How to find the best among available OR i) SAP Directly suggesting the one and best transportor available on a given route.
    Please help.
    Regards,
    Dipti.

  • The most cost-effective long-term solution, Upgrade or Buy Newer Computer?

    I am looking for the most cost-effective long term solution for me as an self-employed interior designer. I need help making a decision: Is it reasonable to upgrade my iBook G4 (RAM, operating system)(+bigger hard drive)(+buy new rechargeable battery)(+buy new portable power adapter)?; or do I need to abandon it and buy a newer apple computer (0-2 years old)?
    ABOUT MY MAC:
    Hardware Overview:
    Machine Model: iBook G4
    CPU Type: PowerPC G4 (1.1)
    Number Of CPUs: 1
    CPU Speed: 1.2 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 256 MB
    Bus Speed: 133 MHz
    Boot ROM Version: 4.8.7f1
    I will appreciate your suggestions very much! Thanks a lot in advance!

    Hi Cali and Welcome to Apple Discussions,
    I think that decision would depend on how you plan to use this laptop. In addition it would depend on your client base and the image you need to project.
    I used to be a commercial producer. If I was still doing that today I'd need to project a successful up to date image. My clients at the large agencies were/are attracted to the latest technologies. I would have the hippest iPhone apps and probably a 15" Unibody MacBook Pro.
    I have a pro photographer client who wanted to buy an iMac a few years back but I insisted she buy a Mac Pro with at least two of the largest Cinema Monitors she could afford.
    She has thanked me multiple times since she says her clients are so impressed with her images when she displays them on those large monitors.
    So it would depend on how you're using the laptop and your client base.
    The first thing I see with your iBook is that your RAM is pretty minimal. If you update that would be the first thing to do.
    This is actually the iBook that I use and for me it's very cost effective. They're both 1.2 GHz machines. I use a 14" around the house and a !2" when we're traveling. It is very cost effective for me as I purchased them broken for under $125 total. I use salvaged drives and RAM. It works for me since my business is repair and the clients are impressed how well my 5 year old iBook works.
    Richard

  • I have a small production client looking to run 1 workstation running Mac Lion 10.7.3 and two work stations running Windows7 64 bit. They will all be talking to the same storage array through 8Gb FC. What is there most cost effective way to do this?

    I have a small production client looking to run 1 workstation running Mac Lion 10.7.3 and two work stations running Windows7 64 bit. They will all be talking to the same storage array through 8Gb FC. What is there most cost effective way to do this?

    Thank you for your help.
    The client has already made the jump to 8Gb including HBA's, switch and RAID Storage.
    The other question will be if they need a seperate Mac Server to run the Meta Data or are they able to use the current Mac they are running to do this?
    The Mac is a 201073 model they say with 12 Dual Core 2.66Mhz processors and 16 GB of Memory. This system is currently doing rendering. It has the XSAN Client but I understand for the solution to work they need to also run XSAN Server on a MDC.

  • Most cost effective yet creative plug ins available?

    Hello,
    What are the most cost effective, creative/innovative and practical set of Final Cut and Motion plugin on the market? Core melt V2? Boris Continuum Complete? Genarts Sapphire? Other? Right now on Digital Juice, they are offering 50% off of Core Melt V2 at $199, but some say the video output quality with the plugins does not match up to some of the other plugins companies. What sort of advice could you offer about this topic?
    Thank you,
    Jordan

    Buy all the most expensive plugins and software that you can get your hands on and your videos will be the best ever seen on YouTube. Invest as much time as you can in every application you purchase because you know what you want to produce and you know that the application that you've purchased can produce your desire and that is why you purchased it. Get the Apple Pro Training curriculum available at PeachPit Press.
    Here's an example of using limited resources to produce desired results:
    I worked in an office that only had an iMac and Final Cut Express where I edited stock videos using stock images. We're talking limited resources to the max. You would be surprised of the outstanding outcome of production using these limited resources. I needed an image editing app so I downloaded GIMP - saved the production department thousands of dollars in investing in similar applications. I so very much wish that I could of brought my nice, new, shiny MBP into the office to work on simply because I know what I want to produce and I know that I have the tools to accomplish those visions on my system. Unfortunately I am limited to the resources that were available at the office. Sometimes you just have to make the best with what you have. If you know what you want to create then it's easier to accomplish and selecting the right tool for the job is easier in this regard as well. How can you know what you want if you don't really know what you want? If all you know is that you want something less-amateur then all you will receive is a less-amateur response...

  • What is the most cost effective way to have a broken screen repaired?

    What is the most cost effective way to have a broken screen repaired?

    One thing to bear in mind, if your iPad is still under any sort of warranty, using any unauthorized repair place may void that.
    So you may find less expensive places that are non-authorized, but once you use them, Apple disowns your device and if you have any warranty left, it'll be void.

  • Best solution for 2+ monitors CS6

    After reading discussions about the flaws of external hardware (matrox, BM, AJA) - or at least the drivers needed, I want to find the right solution for using two computer monitors for my Workspaces and a third (HDMI or HD SDI) output for a 37-inch program monitor (not broadcast, but decent Panansonic LED). I have been reading tons of specs and posts... what is best? I am planning a new CS6 workstation
         1. Dual Quadro 4000s
         2. Dual GTX 570s or 680s
         3. some new idea??
    Why can't Nvidia make all three ports active on the Quadros?
    Wishing Adobe would post more than just minimum specs, but some kind of details on levels of workstations based on types of workflows...
    Thanks,
    Diane
    PS I've been using a $50 HP USB signal splitter on CS5 for a couple of months - it's been great - allowing me to spread my Workspace across two monitors with HDMI to the panny monitor. But that can't really be The Solution, can it?!?

    GTX 670/680 cards support up to 4 monitors. Dual cards are not supported, nor is there a need for with the Kepler range of cards. Well, a bit more detail, you can install two cards if they use the same driver, but only one will be used by PR and the other only for steering monitors and that is a bit expensive with Quadros or the GTX 570/580, when a single 670/680 does the same job at much lesser cost and with better performance on most systems.

  • Looking for a cost effect headset for my QS 2002....

    Afternoon all
    I'm in the market for a cost effect headset kit for my QS 2002.... so I can tune into my MLB games quietly... any ideas?
    Any links to a workable solution?
    Thanks
    Rich

    I picked up a "Studio Monitor" headset by Sony for $19.95 and a audio extension cable for $3.95 at Best Buy and they work great with my QS 2002!

  • Most cost efficient computer for a server using these specs

    I want to know how important processing power and internet connection are when talking in terms of using multiple java socket threads that receive messages from various clients at once..
    I need a computer that can hold as many of these threads at once while at the same time I dont want it to be to costly.. For example it sounds like a waste to get a 3Gz processor and a super internet connection when I can likely do practically the same amount of threads with maybe a 2Gz processor and the same internet connection..
    So how important are each of these factors? Can anyone suggest a machine that would be able to handle plenty of threads for a nice price? I'm looking for a high Thread/dollar ratio :)....
    Brian

    For chat, maybe not that much. The whole thing is likely to be driven purely by I/O from the users. I mean, the majority of packets sent to/from the thing would be expressing short texts messages typed by humans. Unless you're expecting a large operation, I would expect that this wouldn't be very taxing on your systems. What number of users are you expecting?
    Offhand, the thing that glares out of me from your desciption is that you have a single server for pairing people up and (presumably) as a load manager for the chatroom servers. If that server goes down, you're in trouble. If I were you I'd consider adding some redundancy there. Any money might be best spent building up the cluster and making certain that there's plenty of redundancy to go around. For that matter, how many data centers do you have?
    It also occurs to me that you might need a lot of disk space, depending on how much logging you want to do and whether you need to do some kind of session recovery after failures. Also are you storing user profiles for matching the people up? Do you have an external database server that you didn't mention? How much redundancy there?
    There are services whose job is to hit servers and see what the response time is and whether they're up (they'll page you if they go down). That could be another good use for money, rather than specific hardware upgrades.
    Generally it's very difficult to predict this kind of thing in advance, and a good profiling system and an architecture that will let you easily upgrade in response to problems is a good thing. Also lots of testing and load simulation is handy.
    Hope this helps.

  • Solution for multiple monitors

    somebody ask how to connect multiple monitors to lenovo laptor.
    here
    http://www.ixbt.com/news/hard/index.shtml?15/28/50
    (in russian language) is a solution to convert USB 3.0 port to HDMI.
    Stas.

    Hi,
        The underlying technology comes from Displaylink. Most, if not all, of the USB to video solutions are based on their chips. See:
    Displaylink
        I have two different Displaylink based devices, both USB 2.0. They work great with the w520, even when running full screen video at 1920 x 1200.
        Perhaps I would prefer USB 3.0 which is coming out now. Of course the downside of USB 3 is that the mini-dock doesn't support it. I use my third monitor mostly for text, so USB 2 is just fine, and stays plugged in to the mini-dock always.
                                                                    Best, ZZ

  • Solution for Usage Monitoring ??

    Hey All!
    We are in need of a solution which can provide us with detailed analysis of SAP users performance in our Production system. The situation is that we need to have a control over our licensing cost and monitor the usage that our end users are performing on Production client.
    So If anybody is aware of any such standard or third party solution then i would really like to know which one.
    Regards
    Bilal Nazir

    I see a lot of problems with your idea.
    1) Do you have a hub with 1 Gb ports???
    2) You probably will create a loop conecting both switches
    3) STP will be blocking the ports
    4) Should be there a lot of collision
    etc.
    I suggest you use your sensor to monitor only one port.
    Alberto Giorgi from Spain.

  • Solution for port monitoring

    hello everybody,
    we have 2 core 3550 12-G switch. the desktop switch a connected via gigainterface to the core switches. so, i will monitoring all the traffic in the vlans, what can i do? i have only one monitoring port on my 4210 ips. its a good solution when i make one monitor session on the first core switch and one monitor session on the second core switch. the sourceports for example: range giga 0/1 to giga 0/8 the destinaton port giga 0/10. on the destination port i plug a cable to a hub. from the second destination port on the other core switch i plug the cable to the same hub, so i can take one cable to the monitor interface on the ips from the hub.
    many thanks for an answer...

    I see a lot of problems with your idea.
    1) Do you have a hub with 1 Gb ports???
    2) You probably will create a loop conecting both switches
    3) STP will be blocking the ports
    4) Should be there a lot of collision
    etc.
    I suggest you use your sensor to monitor only one port.
    Alberto Giorgi from Spain.

  • Most cost efficient upgrade for A3 speed increase on '07 iMac 24"?

    I've read a bunch of posts on this forum on the "hardware upgrade" subject and I am trying to prioritize my options.
    I have a 24" 2.4Ghz iMac7,1 w/ 3g or ram and the stock 320g internal drive. I have my A3 masters referenced on an external WD 1TB drive using the USB port. I am on OS 1.5.8
    As I am shooting more weddings, the speed it getting unbearably slow, especially when using brushes on raw files (from a Nikon D7000).
    I would love to simply get a newer machine, but the cost is just too much with a growing family. So I am wondering what will give me the biggest bang for the buck. Most of my info comes from references found on this forum including the excellent installation guide at amfiteatar.org
    - Upgrade to OS 10.6 ($30)
    - change ram from 3G to 6G (Kingston Apple 2 GB 667 MHz DDR2 SODIMM and Kingston Apple 4GB Kit (2x2GB Modules) 667MHz DDR2 SoDimm => total $130)
    - change internal drive to WD Caviar blue 1TB $70)
    Total: $230.
    Does this make any sense? IS there a better path for this?
    Thanks very much for any feedback.
    Bo

    Update.
    I did the open heart surgery yesterday (replace original internal drive from 320g to 1tb and upgrade RAM from 3g to 6g) and it is a resounding success.
    Overall speed in Aperture seems to have improved between 2 and 4 times. Particularly noticeable are the retouch operation with brushes.
    So far the 6gb transplant is working without any hitch. After doing a lot of research on it, it seems like the key is to get matching sets of chips from a reputable vendor. OWC in my case.
    So for about $200 and 2 hours of labor (not including hours of research on the net of course) this 3 year old machine has gotten a new lease on life. Definitely worth it!
    In case it helps anyone else, here are the 3 most useful links I have found for this operation:
    General overview of iMac HD and RAM upgrade:
    http://www.amfiteatar.org/content/view/155/78/lang,en/
    Video of HD upgrade:
    http://www.youtube.com/watch?v=IN2vWKlDcdg&feature=related
    Memory:
    http://eshop.macsales.com/item/Other%20World%20Computing/5300DDR2S6GP/?utmsource=amazon&utm_medium=shoppingengine&utmcampaign=productads
    Plus countless great info on this forum of course.
    Thank you Frank and Mr Endo.
    Bo
    PS: Anyone with an answer of whether Snow Leopard would make a difference in A3 speed on a 07 iMac. Some people on this board say yes but since it is not a 64 bit machine, I would not think so.

  • What is the most cost effective program to "view" only "ai" files, no need to edit

    I would like to know what is the most inexpensive program to view only vector "ai" files.  I receive artwork from artists and need to view, but have no need to edit the work.  I find Illustrator to be very expensive for this view only option.  Any advice or help would be greatly appreciated.  I tried a few programs on the web such as softusolve and they opened everything but "ai" despite saying it opens these file extensions.
    Thank you in advance for any advice.

    You didn't say what operating system you are using but if all you are doing is looking at the file and you are on a Mac, then try Art View: http://www.code-line.com/artview/
    It provides Quick Look for Illustrator, InDesign, EPS, ASE, and even FreeHand files. Shows what fonts and colors are used in the file and If the AI file has multiple artboards, you can scroll through all of them in the preview. Shows date created and modifed.
    Cost $25.

Maybe you are looking for