Most iphone4 have fine horizontal interlace onscreen (with a test picture)

Hi all,
I have noticed some very fine horizontal lines on my iphone4 screen with IOS 4.3.5,Its not as silky smooth looking as it was.
they are very fine unless you look carefully you can see a lot of thin horizontal lines on the entire screen.It is a very persistent flicker with flashing horizontal lines on the whole display.
Do you guys have this problem?If you can‘t see it ,use this picture to test it.Save this picture( Full-size image with 640*960,not the Thumbnail) to you camera roll or photo libray,then check it without Zoom in or out,you would see the top and bottom bar flickering.
The test image is using for test screen glitches，it just make you see the interlace flicker more clearly,If the test image flickers on your iphone4 ,you definitely have this issue.Actually,if you are sensitive enough and see carefully at the top bar ,especiall on the lockscreen date bar,you would see fine horizontal lines ,even that you can see the horizontal pixel.The impact is that the screen is not sharp enough as a "retina display"What I am wondering is that they seem to go away after the phone has been in use for a little while and "warms up". Is that a hardware issue?It seems more like software issue.
I found that some guys have the same problem
https://discussions.apple.com/message/13236194#13236194
http://forums.macrumors.com/showthread.php?t=995716
I suspect a relationship with production batches,the screens from different batches need different refresh rate,maybe very small difference,but apple doesn't take it into account

Hi,
>> event id 342 "-This user can't sign in because this account is currently disabled "
For this event, the following article can be referred to as reference.
Troubleshooting token acceptance problems with AD FS 2.0
https://technet.microsoft.com/en-us/library/ff641740(v=ws.10).aspx
Based on the description, for ADFS questions, it's recommended that we ask for advice in the following forum.
Claims based access platform (CBA), code-named Geneva
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=Geneva
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??

I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Every since i upgraded to win8.1 its going on 3 week since i have been able to to use the 3d feature in cs6cc at all . i have done everthing possible cant find a good fix tried so many . its most aggrevating considering its a 30 day with 6 day left. have

every since i upgraded to win8.1 its going on 3 week since i have been able to to use the 3d feature in cs6cc at all . i have done everthing possible cant find a good fix tried so many . its most aggrevating considering its a 30 day with 6 day left. have been able to do what i want. Why is this. worked just fine on windows 7. please help i am critical on going postal.

Have you updated your video card driver from the GPU maker's website?
The drivers that shipped with Win 8 are pretty out of date (and buggy).

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
Menu > Format > Import Styles
The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
Peter

I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

I'm going to guess videos buffer for a while also...
Two possibilities, one is you should close apps on the iPad, the other is your internet speed is not able to handle the demands of a high speed device.
To close apps: Double click home button, swipe up to close the apps.
To solve internet problem, contact your provider. Basic internet is not enough for video games and movies. Your router may be old and slow.

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message: "there was a problem downloading the software for the i

I have an old iPhone 3Gs with software version 4.3.5, I am trying to use it again, and it works fine, but I have not been able to update the software. Every time I try, I get the following message:
"there was a problem downloading the software for the iPhone, the network connection could not be established". This happens even though I have a working internet connection.
Besides that, all the other functions work properly, even synchronize apps and library.
Will I be able to update the software?

look around the forum tons of people repport that they can't update
makes you suspect that apples update servers can't meet the depand of too many users
trying to update at once

Using a IP191 monitor, have random horizontal streaks on display - have no problem with other browsers; also no problem with FF on other family PC's

Using a IP191 monitor, have random horizontal streaks on display - have no problem with other browsers; also no problem with FF on other family PC's.
These "streaks" appear to be area of too high frequency scanning; they can be cleared by scrolling up and/or down.

hello, maybe that's an issue with hardware acceleration - please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]], or in case this doesn't solve the issue or there is no new version available at the moment, disable hardware acceleration in the firefox ''menu [[Image:New Fx Menu]] > options > advanced > general''.

I have downloaded the most recent itunes on my new computer with windows 8 but a message pops up saying "the itunes library.itl file is locked, on a locked disk or you do not have write permission for this file. How do I fix?

I have downloaded the most recent itunes on my new computer with windows 8 but when I attempt to get in I get this message "The itunes library.itl file is locked, ona locked disk, or you do not have write permission for this file." How do i fix this?

Repair iTunes Security Permissions
Right-click on your main iTunes folder and click Properties, then go to the Securitytab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
Repeat with the media folder if it isn't stored inside the main iTunes folder.
If you've brought over the library from another computer you may also want to remove any "mystery" identities (S<string of dashes & digts>) that have come over from the old computer...
The images above are from Windows 7. Hopefully the system isn't too different in Windows 8.
tt2

Photos in my from my iPhone have same numbering as photos from my dig camera. They all go into iPhoto fine but when I backup to my ext hard drive it will only save one with the name IMG 1002 and I have two separate images both with that name. Help?

Photos in my from my iPhone have the same numbering as photos from my digital camera. They all go into iPhoto fine but when I backup to my ext hard drive it will only save one with the name IMG 1002 and I have two separate images both with that name. How do I get them all to save on my ext hard drive and hope do I prevent this numbering overlap in the future? I'm really hoping I don't have to go through and manually rename every single picture. Thanks.

How are you backing up the photos? The best way is to backup the library itself as that will preserve your organizational efforts as well as all metadata like keywords, titles, faces, places, books, etc.
You can use a backup application that does incremental backups. Thus only the first backup is a full one and subsequent backups just copy those files that are new or changed. I use Synk Pro. The lower cost version, Synk, will do the same job. Other similar apps can be found at MacUpdate.com.
OR: upload your camera to a folder on the Desktop. There you can rename the files to something that is more informative than just the file name. I use the date (international format) along with a brief desc: 2007-1-20-adian1stbday-001.jpg. File renaming apps can also be found at MacUpdate.com. Also you can give the folder an informatve name which will become the Event name when you import the folder of photos into iPhoto.
OT

HT204370 I downloaded an HD movie onto my laptop from i-tunes. It plays fine on my laptop, but when I plug in my HD projector, the movie quits. When I unplug the projector, the movie starts again. I have never had a problem with projecting an itunes mov

I downloaded an HD movie onto my laptop from i-tunes. It plays fine on my laptop, but when I plug in my HD projector, the movie quits. When I unplug the projector, the movie starts again. I have never had a problem with projecting an itunes movie before this. Someone told me that i-tunes changed something so that movies can no longer be projected. We have a home theatre and have watched movies this way quite regularly, so it would be a drag if Apple will prevent us from doing this in the future.

I don’t know about projection, but I’m unable to watch HD content in iTunes because my Apple 30-inch Cinema Display is not HDCP-compliant (which is part of an HD copy-protection scheme).
The other movies you’ve projected, were they HD as well? If not, it could be the same problem: your projector is not HDCP-compliant.

Hi all - any idea how to download songs from an old AOL iTunes account - have updated to Apple ID which is fine for new songs but didn't realise this wouldn't include the old songs. Have a 1st gen ipod with the original purchases on if that helps

Hi all - any idea how to download songs from an old AOL iTunes account - have updated to Apple ID which is fine for new songs but didn't realise this wouldn't include the old songs. Have a 1st gen ipod with the original purchases on if that helps

....... is there a way for me to get my old music library (which was controlled by my dad's apple ID) onto my new mac, but from that point on, start using my own apple ID for purchases?........
Yes, once the content is in iTunes on your computer, just click it to play and authorise your computer to play it by entering your Dad's ID and password.
Log into your own account and start purchasing your own content which will then be added to the existing content.

I rented a Movie and it has been loading for 3 hours now. Internet connection is fine. Have never had a problem with this before. What's really annoying is that the 24 hour time limit is counting down even though we cant watch it. Any suggestion"hours now

I rented a Movie and it has been loading for 3 hours now. Internet connection is fine. Have never had a problem with this before. What's really annoying is that the 24 hour time limit is counting down even though we cant watch it. Any suggestions?

The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.
Additionally, your 24 hours don't start until you begin to watch the movie, you have 30 days to start watching the movie.

I'm trying to view a site that sends a message that I don't have the most recent graphic card drivers to view with. It suggests I have the ability to view, but that my drivers might be disable. I don't know how to check to see what graphic drivers my ma

I'm trying to view a site that sends a message that I don't have the most recent graphic card drivers to view with. It suggests I have the ability to view, but that my drivers might be disabled. I don't know how to check to see what graphic drivers my macbook (end of 2008 model) have enable. Can someone help?

You don't need to care about graphic driver on Mac OSX. It includes in OSX and run the driver your MacBook need.

I have a iPhone4 acquired in Portugal. I will be moving to the EQUATOR (South America). Whenever I have visited the country before, with other cellphones, they did not work (different band) forcing me to buy a local cellphone. Will my iPhone4S work there?

I have a iPhone4S acquired in Portugal. I will be moving to the EQUATOR (South America). Whenever I have visited the country before, with other cellphones, they did not work (different band) forcing me to buy a local cellphone. Will my iPhone4S work there?

If it is unlocked it will work if you get a SIM from the carrier you will be using. Note that Apple does not and cannot unlock phones. Only the carrier it is presently locked to can unlock it.

The sliders in Lightroom worked fine for several months with my Sony NEX3N but now they have no effect. I can only edit photos by changing the histogram directly.

The sliders in Lightroom worked fine for several months with my Sony NEX3N but now they have no effect. I can only edit photos by changing the histogram directly.

The sliders in Lightroom worked fine for several months with my Sony NEX3N but now they have no effect. I can only edit photos by changing the histogram directly.

Most iphone4 have fine horizontal interlace onscreen (with a test picture)

Similar Messages

Maybe you are looking for