Most of the sites has scribbler lines over the worlds and i cant read nothing like this
most of the sites i go on there's scribbler lines over the worlds and i cant read them .
Is your iPhone jailbroken? If so see: http://support.apple.com/kb/HT3743
Similar Messages
-
My phone has lines from top to bottom the screen has nothing , I tried to reset it many times also tried to reset with computer and nothing. I used to tap on it and sometimes it worked but not no more , I even broke the screen and cracked the back so now what ??? this I-phone 4 is the worst phone i have had . I started with the first I-phone tthen the second and third and they were all good , in fact my kids have them now . Since I got the I-phone 4 nothing but problems.and its only A little over A year since i got it
I am having the same issue. ** MY IPHONE IS TURNING OFF RANDOMLY ** and it's driving me crazy.
THE SYMPTOM... I am using my phone fine and then when I go to send a text, take a photo, etc, it just turns off. This started a few weeks ago after upgrading to the new IOS. The 'symptoms' increased in frequency and my phone started turning off more frequently. I took my Iphone to the apple store. They reset the phone to factory standards and the problem still exists.
THE PROBLEM: The guy at the Genius Bar said he knows there is a known software issue, and this looks like it's affected my processor. BUT this was only after I told him that I have been reading about a lot of other people having the same problem.
THE SOLUTION: Are you having the same issue? ... Reply to this post and let me know. If a lot of people are having the same problem, Apple will probably just swap out the phones. My phone is in mint condition except for the new 'problem' its having after I upgraded my software. -
i was updating my iphone 4s but an error occured while updating it. my computer is not recognizing the phone and i cant restore it.
See this support document for help. You may have to do this more than once. http://support.apple.com/kb/HT1808
-
my ipad has gone in lost mode by mistake and now i have it and i enter the password and i cant enter my ipad how can i enter or restart the ipad and start back over new
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
My icloud emails arent arriving most of the time and a few days ago my iphone and ipad started showing "Can't Get Mail" box. This has not happened before since I set up the iclud email address with the purchase of my ipad about a month ago.
That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it... -
i have a line drawing (black on white paper) i have scanned and need to make the white paper transparent, maintaining the line drawing, can i and then HOW can i do this in PS? this is for my business logo. ive used it for years but with a solid background. id like to have it just be the drawing over my photos with a transparent background.
First let me apologize for posting a reply that was only suitable for advanced users. Photoshop is broad and powerful therefore has a huge learning curve. In fact I would state no one knows and uses all of Photoshop. When we first get Photoshop it intimidate us and we're very uncomfortable using it. Many thing are not intuitive there in much learning involved. After some time we begin to know something and we are able to do some thing. Learning become rapid and we start playing in Photoshop. It is very important to play with Photoshop. Playing with Photoshop and asking for help with in forums like this IMO is the best way to learn.
Photoshop Power lies in layers, selection and automation. However it takes knowledge to use photoshop well so most powerful tool you have ins Photoshop is the gray matter between your ears. Most at one time or another want to watermark or put a logo on their image. So its best to automate this process. All run into a problem in the process. "Size" We find our assets vary in size and aspect ratios. Landscape, Portraits, Panoramas and others. This complicates automation. Vector graphics works best when size vary greatly. If you can not work out how to create a vector solution like a custom shape. Create your Logo and watermark large thing scale down better the up. Text scale well for text uses vectors graphics however if you rasterize text it will not scale well.
I do not type or do English well so let me do some screen captures. I can not stress enough how important Black, White, Grays and Blending is when it come to image processing. Become friends with Multiply, Screen, Overlay and Luminosity blending.....
However when there is a white or black background though you can blend them you can not add a style like a drop shadow, emboss or make it invisible setting fill to 0 so only the style is visible. When there is contrast between the logo and background it is easy to separate the two. To select the background and delet it to have the logo with a transparent background. Many tools can be used to create the selection hee I use my action kill white.
Vector Shape would work better for scaling However it would be best to create the logo from scratch in a vector program like illustrator but I never had the resources to justify the Creative suite. I only had Photoshop. Recently Adobe gave me and other a year subscription to the creative suite for our participation here. I still have not installed anything but Photoshop, A while back I found a program that can create vector patf for black and white art work. It will not be as good as using something like illustrator. However vector paths can be edited in Photoshop and cleaned up some. Here is the PSD it 13MB because od the gradient http://www.mouseprints.net/old/dpr/AmPm24-7.psd -
when i click some thing on facebook a window pops up
before i could right click the link in the window
but now its got a dot line box around it and i cant helpCan you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Hi In my deployment machine most of the user will be xp so i copy this Prin
hi
In my deployment machine most of the user will be xp so i copy this PrintControl.dll in system32 folder and in run command i type regsvr32 PrintControl.dll it shows me successfully register your dll then on clicking print button in crystal report viewer it shows me print dialogue everything fine.
now my client changed his PC Operating system:-
He is using windows 7 64 bit version
Here I do two methods but both was not working:
First method: I copy my dll into syswow64 also in system32 folder then i register using cmd
c:\windows\syswow64 then it took me
c:\windows\syswow64: here i will enter
regsvr32 c:\windows\system32\printcontrol.dll
its says dll register successfully but printing dialogues not showing me.
Second Method:
I copy my dll into system32 folder then i register using cmd
c:\windows\system32 then it took me
c:\windows\system32: here i will enter
regsvr32 c:\windows\system32\printcontrol.dll
here it shows dll not found i already palced my dll in system32...
Whats the problem what i have to do.. to run my CR print dialogue in windows 7..
whats the right procedure to run print dialogue to be work in my windows 7 64 bit..?
Waiting for your soon Reply
ThanksHello,
Need more info:
What version of CR are you using? There is a possibility your version is not supported on Windows 7. Check the Platforms PDF's for more info.
AND NEVER copy anything to the \Windows\system folder. That breaks Windows Certification and if anyone else wants to install CR your copy will always take precedence over their control...
The PrintControll dll is in the crviewer CAB file. Open it with WinZip and then install it that way.
Don -
Do you know why I cannot access the scheduling and rescheduling features of onetoone? This is over several days. Either I am not able to fill in the ID/password boxes from an Apple email appointment reminder, or if I go through Apple onetoone via Safari, I get perpetual spinning after I fill in and click. Help! Thanks.
Call the store in question:
http://www.apple.com/retail/
Extension 5 in the stores in my area has usually led me to getting ahold of a real person. It may differ by store. -
Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?
Contact iTunes Store Support.
-
I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried charging it at the store and got the same message. I was given another phone, I still get the same error with the new phone.
Wowuor,
Thank you so much for reaching to us today. I want to make sure that we get the device charging the correct way. There is no physical or liquid damage to the phone or to the power cord correct? Did this error just start to appear as of last week? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport -
My iPhoto has dumped all my albums. I have ran and re ran all the repair and re build programs, nothing is working, how to I get my photos back???
Just as an FYI: some people report issues where their albums are missing but their photos remain. Some mention photos going but the albums still present, just not populated.
There is no iPhoto 10.8.2. Perhaps you're referring to the version of the OS you have? Not especially relevant, the version of iPhoto is what's needed here.
I mention this should you seek help in the future.
For me: vague and incomplete would describe your attempt at seeking help. You're too lazy to give an accurate description of your issue, too lazy to tell us what you've tried to repair it - so we don't waste time your time (and ours) making suggestions you've already tried - and when asked don't respond except to abuse the person who tries to help you.
Good luck with your issue. -
Today my iPod touch 4 generation was dropped. now it just has a white screen. i tried reseting it by clicking the home and lock buttons but nothing helped. what is my problem and how do i fix it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my ipad no respond and has a security copy by cloud and the screen and I cant do touch accions and no disapears this accion.
Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo. -
my iphone 4s has stopped access to wi-fi and I cant turn the wifi from off to on. how can i reset this? i already tried the reset setting
iOS: Wi-Fi settings grayed out or dim
Maybe you are looking for
-
Newbie question - parameter selection -- update the table - basic flow?
Greetings Newbie here trying to work my way through a 'simple' example for a demo. I'm currently using a workspace on the Apex web site and have uploaded a table with seven (7) columns of which the first three (3) make up the primary key. This is a c
-
Ora-1031 - emca -config dbcontrol db
Hi, I had an instance that was running fine with a fully functioning EM installation. We needed to move the database onto a different domain which meant that I needed to drop the repository and console and recreate them. The repository recreated with
-
Having to wait for Trackpad and Keyboard to work when waking from sleep, any solutions?
I have a 2012 MBP 13" base model (OSX 10.8.2) and when I first brought it was really fast at waking from sleep (lid being closed) and the trackpad and keyboard would work instantly. Now I'm having to wait 20+ seconds before I can do anything with the
-
ISO date format to local date format
All I have a requirement to convert the given ISO date format String to local date format String Can someone give the the piece of code to do this e.g I receive the following String "2003-03-15T09:00:00" and need to convert this to "03/15/2003 09:00:
-
Sorry Folks, I do not know anymore where to look for, even here in the forum there are only hints but no solution . Following error by accessing the Portal page =========================================== Call to WPG_SESSION API Failed. Error-Code:65